Les structures pliées intéressent architectes et ingénieurs pour leurs qualités structurelles autant que spatiales et plastiques. En prenant comme point de départ la bande rectiligne pliée, ce travail de recherche aborde non pas la conception de surfaces plissées mais celle de structures réticulées. La conception de structures “à trous” à partir de bandes pliées constitue un angle d’approche original. La notion de continuité induite par le pli transforme la manière de concevoir la structure réticulée, habituellement caractérisée par des nœuds et barres dissociés. L’emploi de bandes continues rectilignes est une approche possible pour rationaliser la conception de formes complexes en minimisant la quantité de chutes de matière. Cette recherche explore de nouvelles méthodes de conception des formes courbes. Les objectifs de cette recherche sont :- la classification des différentes approches possibles dans la conception à partir de bandes rectilignes pliées- l'étude d'éléments modulaires pliés dont l’assemblage permet la génération de surfaces courbes variables: la géométrie de différentes configurations de bandes pliées sera décrite ainsi que les assemblages autorisés / Folded structures are attractive to architects and engineers for their structural qualities as well as spatial and plastic qualities. Taking as a starting point a linear folded stripe, this research does not address the design of pleated surfaces but that of reticular structures. The design of structures with "holes" from folded stripes is an original angle of approach. From a conceptual point of view, the continuity caused by folds transforms the usual conception by separated nodes and bars of reticular structures. The use of continuous linear stripes is one possible approach to make more efficient the design of complex shapes by minimizing the produced offcuts. This research investigates new methods of designing curved shapes. The aims of this research are:- A classification of different possible approaches encountered when conceiving from folded stripes.- The study a modular folded elements which assembly allows the generation of various curved surfaces : the geometry of different configurations of folded stripes and the assemblies allowed will be described

Self-cleaning, anti-corrosion, anti-icing, dropwise-condensation, and drag-reduction are some applications in which superhydrophobic surfaces are implemented. To date, all the studies associated with superhydrophobic surfaces have been dedicated to understanding the liquid interaction with surfaces that are macroscopically smooth. The current study investigates the solid-liquid interaction of such surfaces which are fully decorated with macroscopic ridges (ribbed surfaces). In particular, the drop motion and impact on our newly designed non-wettable ribbed surface have been investigated in this work. Our experimental investigations have shown that liquid drops move faster on the ribbed surfaces due to lower friction induced by such a surface pattern. Moreover, an impacting droplet shows shorter contact time on ribbed surfaces. This concludes that ribbed surface pattern can be an efficient alternative design for the related applications. Besides the experimental studies, the theoretical analyses done in this work have led to, firstly a scaling model to predict descent velocity of a rolling viscous drops on an inclined non-wettable surface more accurately. Secondly, for curved superhydrophobic surfaces a scaling model which correlates the contact time of the impacting drop to its impact velocity has been developed. At the end, the knowledge obtained from this work has led to a special surface design which exhibits a contact time shorter than the inertial-capillary time scale, an unprecedented phenomenon.

Free energy techniques provide the basis for an analysis of aspects of the liquid-vapour interface undertaken in this study. The main focus of this work is an extensive theoretical investigation into properties of the surface tension, including curvature dependence and supersaturation effects, using Monte Carlo computer simulation techniques.

Free energy techniques provide the basis for an analysis of aspects of the liquid-vapour interface undertaken in this study. The main focus of this work is an extensive theoretical investigation into properties of the surface tension, including curvature dependence and supersaturation effects, using Monte Carlo computer simulation techniques.

The paper presents a method for generating curved surfaces of 3D finite element meshes by mesh refinement starting with a very coarse grid. This is useful for parallel implementations where the finest meshes should be computed and not read from large files. The paper deals with simple geometries as sphere, cylinder, cone. But the method may be extended to more complicated geometries. (with 45 figures)

The paper presents a method for generating curved surfaces of 3D finite element meshes by mesh refinement starting with a very coarse grid. This is useful for parallel implementations where the finest meshes should be computed and not read from large files. The paper deals with simple geometries as sphere, cylinder, cone. But the method may be extended to more complicated geometries. (with 45 figures)

Ce travail porte sur l'étude de propriétés optiques des fluides à échelle micrométrique. A cet effet, nous avons conçu, réalisé et étudié différents types de micro-résonateurs optofluidiques, sous forme de laboratoires sur puce. Notre analyse est fondée sur la modélisation analytique et numérique, ainsi que sur des mesures expérimentales menées sur des micro-cavités optiques; nous utilisons l'une d'entre elles pour des applications de réfractométrie de fluides homogènes et de fluides complexes ainsi que pour la localisation par piégeage optique de microparticules solides. Nous nous sommes d'abord concentrés sur l'étude d'une nouvelle forme de micro-cavité Fabry-Pérot basée sur des miroirs courbes entre lesquels est inséré un tube capillaire permettant la circulation d'une solution liquide. Les résultats expérimentaux ont démontré la capacité de ce dispositif à être utilisé comme réfractomètre avec un seuil de détection de 1,9 × 10-4 RIU pour des liquides homogènes. De plus, pour un liquide contenant des particules solides, la capacité de contrôler la position des microparticules, par des effets de piégeage optique ou de liaison optique, a été démontrée avec succès. Dans un second temps, un résonateur optique est formé simplement à partir d'une goutte de liquide disposée sur une surface super-hydrophobe. La forme quasi-sphérique résultante est propice à des modes de galerie. Il est démontré que, jusqu'à des tailles de gouttelettes millimétriques, la technique de couplage en espace libre est toujours en mesure d'accéder à ces modes à très faible queue évanescente d'interaction, contrairement à ce qu'indiquait jusqu'ici la littérature. De tels résonateurs optofluidiques à gouttelette devraient trouver leur application notamment comme capteur d'environnement de l'air ambiant ou encore comme incubateur de micro-organismes vivants pouvant être suivis par voie optique / This work focuses on the study of optical properties of fluids at the micrometer scale. To this end, we designed, implemented and studied different types of optofluidic micro- resonators in the Lab-on-Chip format. Our analysis is based on analytical and numerical modeling, as well as experimental measurements conducted on optical microcavities; we use one of them for refractometry applications on homogeneous fluids and on complex fluids, as well as for the localization of solid microparticles by optical trapping. We first focused on the study of a new form of Fabry-Perot micro-cavity based on curved mirrors between which a capillary tube is inserted for injecting a fluidic solution. Experimental results demonstrated the ability of this device to be used as a refractometer with a detection limit of 1.9 × 10-4 RIU for homogeneous liquids. Furthermore, for liquid containing solid particles, the ability to control the microparticles position either by optical trapping or optical binding effects has been successfully demonstrated. In a second step, an optical resonator is simply formed from a liquid droplet placed on top of a superhydrophobe surface. The resulting quasi-spherical shape supports resonant whispering gallery modes. It is shown that, up to millimeter size droplets, the proposed technique of free-space coupling of light is still able to access these modes with very low evanescent tail interaction, contrary to what was indicated in the literature so far. Such optofluidic droplet resonators are expected to find their applications for environmental air quality monitoring, as well as for incubator of living micro-organisms that can be monitored optically

This work is devoted to understanding the formation of supported lipid bilayers (SLBs) on curved surfaces as a function of lipid properties such as headgroup charge/charge density and alkyl chain length, and nanoparticle properties such as size and surface characteristics. In particular, the formation of SLBs on curved surfaces was studied by varying the size of the underlying substrate SiO2 nanoparticles with size range from 5-100 nm. Curvature-dependent shift in the phase transition behavior of these supported lipid bilayers was observed for the first time. We found that the phase transition temperature, Tm of the SLBs first decreased with decreasing the size of the underlying support, reached a minimum, and then increased when the size of the particles became comparable with the dimensions of the lipid bilayer thickness; the Tm was above that of the multilamellar vesicles (MLVs) of the same lipids. The increase in Tm indicated a stiffening of the supported bilayer, which was confirmed by Raman spectroscopic data. Moreover, Raman data showed better lipid packing and increased lateral order and trans conformation for the SLBs with increasing the curvature of the underlying support and decrease of the gauche kinks for the terminal methyl groups at the center of the bilayer. These results were consistent with a model in which the high free volume and increased outer headgroup spacing of lipids on highly curved surfaces induced interdigitation in the supported lipids. These results also support the symmetric lipid exchange studies of the SLBs as a function of the curvature, which was found to be slower on surfaces with higher curvature. Further, the effect of surface properties on the formation of SLBs was studied by changing the silanol density on the surface of SiO2 via thermal/chemical treatment and monitoring fusion of zwitterionic lipids onto silica (SiO2) nanoparticles. Our findings showed that the formation of SLBs was faster on the surfaces with lower silanol density and concomitantly less bound water compared to surfaces with higher silanol density and more bound water. Since the two SiO2 nanoparticles were similar in other respects, in particular their size and charge (ionization), as determined by zeta potential measurements, differences in electrostatic interactions between the neutral DMPC and SiO2 could not account for the difference. Therefore the slower rate of SLB formation of DMPC onto SiO2 nanoparticles with higher silanol densities and more bound water was attributed to greater hydration repulsion of the more hydrated nanoparticles. Lastly, we have investigated the effect and modulation of the surface charge of vesicles on the formation of SLBs by using different ratios of zwitterionic and cationic DMPC/DMTAP lipids. Through these studies we discovered a procedure by which assemblies of supported lipid bilayer nanoparticles, composed of DMPC/DMTAP (50/50) lipids on SiO2, can be collected and released from bilayer sacks as a function of the phase transition of these lipids. The lipids in these sacks and SLBs could be exchanged by lipids with lower Tm via lipid transfer. / Chemistry

Gegenwärtige Bestrebungen materialwissenschaftlicher Forschung beschäftigen sich unter anderem mit der Überführung zweidimensionaler Elemente elektronischer, optischer, plasmonischer oder magnetischer Funktionalität in den dreidimensionalen (3D) Raum. Dieser Ansatz vermag mittels Krümmung und struktureller Topologie bereits vorhandene Eigenschaften abzuändern beziehungsweise neue Funktionalitäten bereitzustellen. Vor allem Vektoreigenschaften wie die Magnetisierung kondensierter Materie lassen sich aufgrund der Brechung der Inversionssymmetrie in gekrümmten Flächen stark beeinflussen. Neben der Entwicklung diverser Vorgänge zur Herstellung 3D magnetischer Gegenstände sind geeignete Untersuchungsmethoden wie beispielsweise tomografische Abbildungen der Magnetisierung von Nöten, die maßgeblich die physikalischen Eigenschaften bestimmen. Die vorliegende Dissertationsschrift befasst sich mit der Abbildung von magnetischen Domänen in 3D gekrümmten Dünnschichten beruhend auf dem Effekt des zirkularen magnetischen Röntgendichroismus (XMCD). Die in diesem Zusammenhang entwickelte magnetische Röntgentomografie (MXT) basierend auf weicher Röntgenmikroskopie stellt eine zu Elektronenholografie und Neutronentomografie komplementäre Methodik dar, welche großes Anwendungspotential in der elementspezifischen Untersuchung magnetischer gekrümmter Flächen mit örtlicher Auflösung im Nanometerbereich aufweist. Die Schwierigkeit der Interpretation von Abbildungen magnetischer Strukturen in gekrümmten Flächen rührt von der Dreidimensionalität und der Vektoreigenschaft der Magnetisierung her. Die hierzu notwendigen Kenntnisse sind anhand von zwei topologisch verschiedenen Flächen in Form hemisphärischer Kappen und hohler Zylinder erschlossen worden. Die praktische Anwendung von MXT ist abschließend anhand der Rekonstruktion magnetischer Domänen in aufgerollten Dünnschichten mit zylindrischer Form verdeutlicht. / One of the foci of modern materials sciences is set on expanding conventional two-dimensional electronic, photonic, plasmonic and magnetic devices into the third dimension. This approach provides means to modify conventional or to launch novel functionalities by tailoring curvature and three-dimensional (3D) shape. The degree of effect is particularly high for vector properties like the magnetization due to an emergent inversion symmetry breaking. Aside from capabilities to design and synthesize 3D magnetic architectures, proper characterization methods, such as magnetic tomographic imaging techniques, need to be developed to obtain a thorough understanding of the system’s response under external stimuli. The main objective of this thesis is to develop a visualization technique that provides nanometer spatial resolution to image the peculiarities of the magnetic domain patterns on extended 3D curved surfaces. The proposed and realized concept of magnetic soft X-ray tomography (MXT), based on the X-ray magnetic circular dichroism (XMCD) effect with soft X-ray microscopies, has the potential to become a powerful tool to investigate element specifically an entirely new class of 3D magnetic objects with virtually any shape and magnetization. Imaging curved surfaces meets the challenge of three-dimensionality and requires a profound understanding of the recorded XMCD contrast. These experiences are gained by visualizing magnetic domain patterns on two distinct 3D curved surfaces, namely magnetic cap structures and rolled-up magnetic nanomembranes with cylindrical shape. The capability of MXT is demonstrated by reconstructing the magnetic domain patterns on 3D curved surfaces resembling hollow cylindrical objects.

Gegenwärtige Bestrebungen materialwissenschaftlicher Forschung beschäftigen sich unter anderem mit der Überführung zweidimensionaler Elemente elektronischer, optischer, plasmonischer oder magnetischer Funktionalität in den dreidimensionalen (3D) Raum. Dieser Ansatz vermag mittels Krümmung und struktureller Topologie bereits vorhandene Eigenschaften abzuändern beziehungsweise neue Funktionalitäten bereitzustellen. Vor allem Vektoreigenschaften wie die Magnetisierung kondensierter Materie lassen sich aufgrund der Brechung der Inversionssymmetrie in gekrümmten Flächen stark beeinflussen. Neben der Entwicklung diverser Vorgänge zur Herstellung 3D magnetischer Gegenstände sind geeignete Untersuchungsmethoden wie beispielsweise tomografische Abbildungen der Magnetisierung von Nöten, die maßgeblich die physikalischen Eigenschaften bestimmen. Die vorliegende Dissertationsschrift befasst sich mit der Abbildung von magnetischen Domänen in 3D gekrümmten Dünnschichten beruhend auf dem Effekt des zirkularen magnetischen Röntgendichroismus (XMCD). Die in diesem Zusammenhang entwickelte magnetische Röntgentomografie (MXT) basierend auf weicher Röntgenmikroskopie stellt eine zu Elektronenholografie und Neutronentomografie komplementäre Methodik dar, welche großes Anwendungspotential in der elementspezifischen Untersuchung magnetischer gekrümmter Flächen mit örtlicher Auflösung im Nanometerbereich aufweist. Die Schwierigkeit der Interpretation von Abbildungen magnetischer Strukturen in gekrümmten Flächen rührt von der Dreidimensionalität und der Vektoreigenschaft der Magnetisierung her. Die hierzu notwendigen Kenntnisse sind anhand von zwei topologisch verschiedenen Flächen in Form hemisphärischer Kappen und hohler Zylinder erschlossen worden. Die praktische Anwendung von MXT ist abschließend anhand der Rekonstruktion magnetischer Domänen in aufgerollten Dünnschichten mit zylindrischer Form verdeutlicht. / One of the foci of modern materials sciences is set on expanding conventional two-dimensional electronic, photonic, plasmonic and magnetic devices into the third dimension. This approach provides means to modify conventional or to launch novel functionalities by tailoring curvature and three-dimensional (3D) shape. The degree of effect is particularly high for vector properties like the magnetization due to an emergent inversion symmetry breaking. Aside from capabilities to design and synthesize 3D magnetic architectures, proper characterization methods, such as magnetic tomographic imaging techniques, need to be developed to obtain a thorough understanding of the system’s response under external stimuli. The main objective of this thesis is to develop a visualization technique that provides nanometer spatial resolution to image the peculiarities of the magnetic domain patterns on extended 3D curved surfaces. The proposed and realized concept of magnetic soft X-ray tomography (MXT), based on the X-ray magnetic circular dichroism (XMCD) effect with soft X-ray microscopies, has the potential to become a powerful tool to investigate element specifically an entirely new class of 3D magnetic objects with virtually any shape and magnetization. Imaging curved surfaces meets the challenge of three-dimensionality and requires a profound understanding of the recorded XMCD contrast. These experiences are gained by visualizing magnetic domain patterns on two distinct 3D curved surfaces, namely magnetic cap structures and rolled-up magnetic nanomembranes with cylindrical shape. The capability of MXT is demonstrated by reconstructing the magnetic domain patterns on 3D curved surfaces resembling hollow cylindrical objects.