An impact of nitrogen, phosphorus and potassium fertilizers on the concentration changes of carotenoid pigments in the Indigofera tinctoria plant by using Raman spectroscopic techniques is studied. Three different concentration levels of the fertilizers with a normal supply as control were added to the plants at two stages. The Raman spectra were taken to determine the carotenoid concentration level changes in the plant leaves in vivo. The ring-stretching mode are the Raman spectroscopic signatures for the carotenoid pigment and its magnitude increased significantly (over 170%) for the case of phosphorus and potassium fertilizers. The effect from the nitrogen fertilizer was detected to be about 130% in comparison with the corresponding control plants. This study has a potential application for the increased extraction of the indigotin dye from plants for the medical and textile industries.

No description available.

No description available.

No description available.

No description available.

This thesis is divided into four parts with organic chromophores for dye sensitized solar cells as the common feature and an introduction with general concepts of the dye sensitized solar cells. The first part of the thesis describes the development of an efficient organic chromophore for dye sensitized solar cells. The chromophore consists of a triphenylamine moiety as an electron donor, a conjugated linker with a thiophene moiety and cyanoacrylic acid as an electron acceptor and anchoring group. During this work a strategy to obtain an efficient sensitizer was developed. Alternating the donor, linker or acceptor moieties independently, would give us the tool to tune the HOMO and LUMO energy levels of the chromophores. The following parts of this thesis regard this development strategy. The second part describes the contributions to the HOMO and LUMO energy levels when alternating the linker moiety. By varying the linker the HOMO and LUMO energy levels was indeed shifted. Unexpected effects of the solar cell performances when increasing the linker length were revealed, however. The third part describes the investigation of an alternative acceptor group, rhodanine-3-acetic acid, in combination with different linker lengths. The HOMO and LUMO energy level tuning was once again successfully shifted. The poor electronic coupling of the acceptor group to the semiconductor surface proved to be a problem for the overall efficiency of the solar cell, however. The fourth part describes the contributions from different donor groups to the HOMO and LUMO energy levels and has so far been the most successful in terms of reaching high efficiencies in the solar cell. A top overall efficiency of 7.1 % was achieved. / QC 20101108

This study focused on the preparation and characterization of new indigo diimine (Nindigo) derivatives as a new atropisomeric scaffold. Trans- and cis- indigo diimines were studied and structure-property relationships were investigated regarding N-C atropisomerism using variable temperature 1H NMR studies and density functional theory calculations. Neutral trans- and protonated cis-Nindigos were prepared featuring a variety of mono ortho-substituted aryl imine groups with varying levels of steric bulk. The neutral trans-Nindigo derivatives generally have smaller N-C rotational energy barriers than their protonated cis-congeners. This finding is consistent with the latter having closer proximity of the N-aryl groups to each other, leading to steric repulsions between the two groups. The N-C rotational energy barriers are substituent dependent; the N-C rotational energy barriers of mono ortho substituted trans-Nindigos were in the range of 6.0 – 16.4 kcal/mol and can be classified as predominantly “Class 1’ atropisomers as defined by LaPlante, while the mono ortho substituted protonated cis-Nindigo analogs have N-C rotational barriers between 12.3 – 25.5 kcal/mol and are classified as “Class 1” and “Class 2” atropisomers. The introduction of additional substituents onto the other ortho position of the aryl imine subunit has significant consequences for the N-C rotational energy barriers of both the neutral trans- and protonated cis-Nindigos making them stable, or close to being, ‘Class 3’ atropisomers, having N-C rotational energy barriers between 31.5 – 276.9 kcal/mol and 29.3 – 32.6 kcal/mol respectively. Recognizing that the protonation state induced trans- to cis-isomerization process could have significant consequences regarding the potential applicability of these atropisomeric Nindigo derivatives, cis-Nindigo derivatives were synthesized that contained a tether (oxalyl or palladium (II) acetylacetonate) between the two indole type nitrogens of the Nindigo, which prevent the central -C=C- from isomerizing. The N-C rotational barriers of the tethered cis-Nindigos also displayed substituent dependent N-C rotational energy barriers. The protonation state of the N, N’-oxalyl bridged cis-Nindigos has a significant impact (higher in energy by a minimum of 5.1 kcal/mol) on the N-C rotational barriers; the neutral N, N’-oxalyl bridged cis-Nindigos have N-C rotational energy barriers ranging between 11.8 – 14.9 kcal/mol, classifying them as “Class 1” atropisomers, while their protonated congeners have N-C rotational energy barriers between 16.9 – 19.8 kcal/mol, which classifies them as “Class 1” atropisomers but are on the cusp of being “Class 2” atropisomers. The size of the tether influences the N-C rotational energy barriers of cis-Nindigos; the one-atom bridged palladium (II) acetylacetonate complexes have generally lower N-C rotational energy barriers than their protonated N, N’-oxalyl bridged cis-Nindigo congeners. The palladium acetylacetonate tethered cis-Nindigo complexes displayed substituent N-C rotational energy barrier dependence and the mono ortho substituted analogs have N-C rotational energy barriers between 12.4 – 20.2 kcal/mol and are predominantly “Class 1” atropisomers, while the bulkier analogs are “Class 2” atropisomers. The palladium (II) acetylacetonate cis-Nindigo complexes that have aryl imine groups with a 2,6-disubstitution pattern have N-C rotational energy barriers greater than 19.7 and 20.2 kcal/mol and are presumed to be stable “Class 3” atropisomers like their unbridged neutral trans- and protonated cis-Nindigo counterparts. / Graduate / 2023-09-12

No / A new technique using ozone loaded on adsorbents for industrial waste-water treatment has been investigated. This is a three-step process: ozone adsorption on a fixed bed column; water treatment on the bed loaded with ozone; and finally drying/ regeneration of the wet bed. Silica gel of mean particle size of 1.5 mm has been tested for ozone loading capacities followed by water treatment, both at ambient temperature. The mechanisms of the mass transfer process during ozone loading and water treatment have been established. The drying of the adsorbent using vacuum and dry air is feasible, but it is a time-consuming operation. A design procedure is described for the whole system.

Yes / Coprecipitation method was used to prepare non-stoichiometric pristine copper and iron layered double hydroxide (LDH) doped with zirconium and embedded with reduced graphene oxide. The composite materials (ZrRGOCuFe LDHs) were studied for the photodegradation of methylene blue (MB) dye as a model contaminant from an aqueous solution. These composites were fully characterized by X-rays diffraction (XRD), Scanning electron microscopy (SEM), Energy Dispersive X-ray Spectroscopy (EDX), Fourier transform infrared spectroscopy (FTIR), Photoluminescence (PL), Raman spectroscopy and Electrochemical Impedance Spectroscopy (EIS). The results of Raman, Photoluminescence and Electrochemical Impedance Spectroscopy revealed the presence of oxygen defects level in the composites. Such defects are believed to be essential for boosting the catalytic potential of the composites. The secondary pollution manifested by transition metal ions is usually tackled by inducing heterogeneous catalysis. Herein, pristine CuFe LDH has been doped with Zr and RGO moieties to realize heterogeneous catalysis within ZrRGOCuFe LDH dopants. An admirable band ranging between 1.74 and 2.0 eV was obtained for the doped materials. The remarkable photodegradation efficiency of 95.2% was achieved by using heterogeneous photocatlyst Zr0.6RGOCuFe LDH within 75 min at a pH of 7, photocatalyst dosage of 1.0 g/L and methylene blue dye solution of 10 ppm under visible light irradiation. The total organic content (TOC) analysis has revealed removal of 92% organic content. Moreover, the catalyst has the potentia to maitain sufficient stability and reusability capacity even after three successive cycles. The reaction kinetics and proposed photocatalytic mechanism were also explained in detail.

Yes / This study investigated adsorption kinetics, adsorption equilibrium, and adsorption isotherm of three dyes [i.e., methylene blue (MB), rhodamine-B (RB), and safranin T (ST)] onto polyacrylonitrile (PAN) and ethanolamine (EA) grafted PAN nanofibers (NFs) membranes (EA-g-PAN). The membranes were characterized by field emission scanning electron microscopy (FE-SEM), Fourier-transform infrared spectroscopy (FT-IR) spectroscopy, and Brunauer–Emmet–Teller (BET). FE-SEM showed a smooth morphology for the NFs before and after grafting, while FT-IR confirmed EA grafting into the nitrile group of PAN. The grafting percentage with no change in the physical nature of the membrane was 12.18%. The nitrogen adsorption–desorption isotherms for PAN and EA-g-PAN NFs membranes were similar and classified as a Type IV according to the International Union of Pure and Applied Chemistry. The surface area, pore-volume, and pore size of the EA-g-PAN increased to 21.36 m2 g−1, 0.16 cm3 g−1, and 304.93 Å, respectively. The pores were cylindrical mesopores with bimodal openings, which means that pores were open at both ends. The adsorption of the MB, RB, and ST dyes onto the PAN and EA-g-PAN NFs membranes leveled off at ~ 60 min. The adsorption kinetics showed good fitting to pseudo-second-order kinetic model and multi-step diffusion process. The order of the dye adsorption was PAN / the Deanship of Scientific Research, King Saud University [RG-1440-060]