Not available / text

Thesis (Ph. D.)--University of Texas at Austin, 2004. / Supervisor: Ray T. Chen. Vita. Includes bibliographical references.

Thesis (M.S.)--University of Missouri-Columbia, 2004. / Typescript. Includes bibliographical references (leaf 79). Also available on the Internet.

Thesis (M.S.)--University of Missouri-Columbia, 2004. / Typescript. Includes bibliographical references (leaf 79). Also available on the Internet.

Thesis (Ph. D.)--University of Texas at Austin, 2001. / Vita. Includes bibliographical references (leaves 129-135). Available also in a digital version from Dissertation Abstracts.

The properties of all-optical nonlinear waveguide devices are investigated. In particular, the nonlinear directional coupler (NLDC) and nonlinear Mach-Zehnder interferometer (NLMZ) are analyzed using perturbation theory. The perturbation theory provides differential equations that describe the amplitude of the waveguide modes as a function of the propagation distance. To be practical, these waveguide devices require nonlinear phase shifts of π or more. Therefore, the theoretical investigation of these devices emphasizes their fabrication in bulk and multiple-quantum-well (MQW) gallium arsenide (GaAs). For the first time, absorption, carrier diffusion, and thermal effects are included in the theoretical investigation of the NLMZ and NLDC. The nonlinear dependence of the coupling terms, which has been neglected in all previous work, is shown to be significant for semiconductor based NLDC's. The effects of carrier diffusion on the nonlinear response of a GaAs waveguide is demonstrated using a self-consistent numerical method. The effects are heavily dependent on the waveguide geometry, and, therefore, should be included in the analysis of nonlinear semiconductor waveguide devices. However, if the diffusion length is large compared to the mode width, carrier diffusion simplifies the investigation since the nonlinear absorption and index change are uniform across the mode. This important conclusion is used in the models for the NLMZ and NLDC. The theoretical models predict the NLMZ and NLDC should work in bulk and MQW GaAs. To demonstrate that the required nonlinear phase shifts for the NLMZ and NLDC are indeed possible in bulk and MQW GaAs, the first experimental observation of electronic optical bistability in a MQW GaAs strip-loaded waveguide is recounted. This original research illustrated that phase shifts in excess of 2π are possible in MQW GaAs waveguides and, therefore, the future of all-optical waveguide devices in semiconductors is optimistic.

No description available.

M.Ing. (Electrical and Electronic Engineering) / This research project sets out to investigate passive L-C coupling circuits as an alternative to transformer-capacitor couplers, with the prime intention to reduce the cost of coupling in power-line communications, hence the title “Compact, Economical Coupling Circuits for Low-Voltage Power-line Communications”. This chapter first presents a short introduction to Power-Line Communications, and then briefly reviews relevant topics surrounding this project. Also discussed, in general, are the standards and regulations for power-line communications i.e. the CENELEC EN50065.1 Standard and the IEEE 1901.2 Standard. This information intends to give the reader guidelines and relevant protocols and/or rules when designing and building communication devices for PLC. This information will also help us in our designs and experimental set-ups as we proceed with this project. The reader will also be introduced to the concept of filtering and impedance matching in communication systems. Emphasis will be laid on the required output signal frequency profile of a coupling band-pass filter. The chapter will define filtering in terms of communications and also discuss the more significant and important parameters in filter circuits. The last section of this chapter will touch on impedance matching and the concept of maximum power transfer, so as to attain maximum signal transfer to the receiver-end.

For size miniaturization and cost reduction, the design of dual band devices has become an emerging research area in recent years. A desirable dual-band solution should offer size compactness, high performance (e.g. low insertion loss) and compatible with conventional printed circuit broad (PCB) technology, especially microstrip lines. / In this research, several new devices, including rat-race coupler, power divider and crossover junction, capable of operating at dual frequency bands are proposed. These structures involve only simple branch-line sections and a minimal number of shunt stubs. All characteristic impedances are ranged from 20 O to 100 O. Most designs can operate with wide frequency spacing between the two bands. These designs offer low insertion loss as well as good return loss performances, and are small in size, in compared to the broadband approach. For design purposes, explicit closed-form equations are derived for the evaluation of circuit parameters. In addition, the usable range of these devices with respect to frequency band separation is examined. For verification, various prototypes are constructed by using microstrip technology and in-house fabrication facilities. Both simulated and measured results are presented and compared with state-of-the-art examples. / Microwave passive couplers are widely used in microwave and millimeter-wave applications and communication systems. Common examples are branch line coupler, rat race coupler, power divider, and crossover junction. They are used for the dividing, combining and re-directing of signal power. / Very often, a passive coupler utilizes simple quarter-wavelength transmission lines for implementation which will lead to narrow-band operation. Therefore, it is difficult to deploy such circuit for wide-band or multi-band applications. Multi-section topologies may be used to broaden the operating bandwidth, with which the major drawbacks are enlarged circuit size and the requirement of extreme high (or low) branch-line characteristic impedances. Both are not attractive for mass and low cost production. Conventional design approaches are, therefore, not suitable for modern communication systems with multi-band operation. / Wong, Fai Leung. / Adviser: Michael Cheng. / Source: Dissertation Abstracts International, Volume: 73-06, Section: B, page: . / Thesis (Ph.D.)--Chinese University of Hong Kong, 2011. / Includes bibliographical references (leaves 118-122). / Electronic reproduction. Hong Kong : Chinese University of Hong Kong, [2012] System requirements: Adobe Acrobat Reader. Available via World Wide Web. / Electronic reproduction. [Ann Arbor, MI] : ProQuest Information and Learning, [201-] System requirements: Adobe Acrobat Reader. Available via World Wide Web. / Abstract also in Chinese.

by Choi Kup Sze. / Thesis (M.Phil.)--Chinese University of Hong Kong, 1994. / Includes bibliographical references. / Acknowledgement / Abstract / Chapter 1. --- Introduction --- p.1-1 / Chapter 1.1 --- Introduction --- p.1-1 / Chapter 1.2 --- References --- p.1-6 / Chapter 2. --- Theory of Optical Waveguides --- p.2-1 / Chapter 2.1 --- Theory of Planar Slab Waveguides --- p.2-2 / Chapter 2.2 --- Theory of Channel Dielectric Waveguides --- p.2-13 / Chapter 2.2.1 --- Marcatili's Method --- p.2-13 / Chapter 2.2.2 --- Effective Index Method --- p.2-20 / Chapter 2.3 --- References --- p.2-24 / Chapter 3. --- A Numerical Method for Optical Waveguides --- p.3-1 / Chapter 3.1 --- Introduction --- p.3-1 / Chapter 3.2 --- two-dimensional Fourier Series Expansion Method --- p.3-2 / Chapter 3.3 --- References --- p.3-13 / Chapter 4. --- Theory of Directional Couplers --- p.4-1 / Chapter 4.1 --- Dual-Channel Coupler --- p.4-1 / Chapter 4.2 --- Multi-channel Directional Coupler --- p.4-8 / Chapter 4.3 --- References --- p.4-9 / Chapter 5. --- Waveguide Formation by Ion Implantation --- p.5-1 / Chapter 5.1 --- Introduction --- p.5-1 / Chapter 5.2 --- Physics of Ion Implantation --- p.5-3 / Chapter 5.3 --- Lattice Damage and Annealing --- p.5-5 / Chapter 5.3.1 --- Lattice Damage --- p.5-5 / Chapter 5.3.2 --- Annealing --- p.5-6 / Chapter 5.4 --- Index Change due to Implantation --- p.5-8 / Chapter 5.5 --- Waveguide Processing Techniques --- p.5-10 / Chapter 5.5.1 --- Photolithography --- p.5-10 / Chapter 5.5.2 --- Processing Techniques --- p.5-11 / Chapter 5.6 --- References --- p.5-13 / Chapter 6. --- Optical Loss in Waveguides --- p.6-1 / Chapter 6.1 --- Loss Mechanisms in Optical Waveguides --- p.6-1 / Chapter 6.2 --- Principle of Propagation Loss Measurement --- p.6-4 / Chapter 6.2.1 --- Cut-back Method --- p.6-5 / Chapter 6.2.2 --- Scattering Light Method --- p.6-7 / Chapter 6.2.3 --- Fabry-Perot Interference Technique --- p.6-9 / Chapter 6.3 --- References --- p.6-16 / Chapter 7. --- Fabrication and Measurement of Optical Waveguides --- p.7-1 / Chapter 7.1 --- Fabrication of Optical Waveguides --- p.7-1 / Chapter 7.1.1 --- Fabrication of waveguides in GaAs by MeV oxygen ion implantation --- p.7-1 / Chapter 7.1.2 --- Waveguide End Facet Preparation --- p.7-4 / Chapter 7.2 --- Measurement of Optical Waveguides --- p.7-7 / Chapter 7.2.1 --- Laser Sources --- p.7-7 / Chapter 7.2.2 --- Guided Wave Excitation --- p.7-10 / Chapter 7.2.3 --- Intensity Profile Measurement --- p.7-17 / Chapter 7.2.4 --- Coupling Coefficient Measurement --- p.7-20 / Chapter 7.2.5 --- Propagation Loss Measurement --- p.7-25 / Chapter 7.3 --- References --- p.7-34 / Chapter 8. --- Results and Discussions --- p.8-1 / Chapter 8.1 --- Near Field Pattern Measurement --- p.8-1 / Chapter 8.2 --- Discussion on the Index Change of the Implanted GaAs --- p.8-5 / Chapter 8.3 --- Propagation Loss Measurement --- p.8-8 / Chapter 8.4 --- Observation of Optical Coupling in Directional Coupler --- p.8-14 / Chapter 8.5 --- References --- p.8-19 / Chapter 9. --- Conclusion --- p.9-1 / Chapter 10. --- Improvement and Extension --- p.10-1 / Appendix 1 Evaluation of the product〈n2 φuvφu'v'〉 --- p.A1-1 / Appendix 2 Transmission of Lossy Fabry-Perot Cavity --- p.A2-1 / Appendix 3 Effective Index versus Index Difference --- p.A3-1 / Appendix 4 Effect of Temperature on the Transmission of a Fabry-Perot Cavity --- p.A4-1 / Appendix 5 Evaluation of An from the Near Field Pattern --- p.A5-1