Spelling suggestions: "subject:"donor:acceptor atemsystem"" "subject:"donor:acceptor systsystem""
1 |
Studies on High Potential Porphyrin-fullerene Supramolecular DyadsSong, Baiyun 12 1900 (has links)
Photoinduced electron transfer in self-assembled via axial coordination porphyrin-fullerene dyads is investigated. Fullerene functionalized with imidazole and fullerenes functionalized with pyridine are chosen as electron acceptors, while zinc pophyrin derivatives are utilized as electron donors. The electron withdrawing ability of halogen atoms make the porphyrin ring electrophilic, which explained the binding of (F20TPP)Zn with fullerene derivatives having the highest binding constant around 105M-1. Another important observation is that the fullerene imidazole binding to zinc pophyrin had higher stability than fullerene pyridine-porphyrin dyad. Computational DFT B3LYP-21G(*) calculations are used to study the geometric and electronic structures. The HOMO and LUMO was found to be located on the porphyrin and fullerene entities, respectively. Photoinduced electron transfer is investigated by the steady-state absorption and emission, differential pulse voltammetry, and nanosecond and femtosecond transient absorption studies. The measurements provided the same conclusion that the increasing number of the halogen atoms on the porphyrin ring leads to the higher binding of porphyrin-fullerene supramolecular dyads and efficient charge separation and charge recombination processes.
|
2 |
Molecular Engineering of Amphiphilic Pyridine Incorporated Conjugated Polymers for Metal Ion SensorsVetrichelvan, Muthalagu, Valiyaveettil, Suresh 01 1900 (has links)
Recent developments in the synthesis and structure-property investigation studies of conjugated polymers have led to the design of novel polymeric materials with tailored properties for advanced technological applications. A promising development in this direction involves the fabrication of conducting polymer based sensors for the detection of metal ions and small organic molecules. Herein, we designed, synthesized and studied a series of amphiphilic copolymers containing alternate phenylene and 2,5- or 2,6- or 3,5-substituted pyridine rings. The basic N-atom of the pyridine ring and the adjacent –OH group from the phenyl ring provide binding sites for metal ions. Thermal properties, and optical properties of polymers in presence of acid, base and metal ions are investigated. A few target polymers showed high sensitivities for metal ions in solution. / Singapore-MIT Alliance (SMA)
|
3 |
Synthesis Of A Novel Series Of Furan And Fluorene Containing Monomers And Their PolymersGunes, Arzu 01 October 2011 (has links) (PDF)
In this study, a novel series of conjugated monomers containing furan and fluorene units / 2,7-di(furan-2-yl)-9H-fluoren-9-one (FOF), 2-(2-(furan-2-yl)-9H-fluoren-7-yl)furan (FFF), and 2-(2-(furan-2-yl)-9,9-dihexyl-9H-fluoren-7-yl)furan (FHF) were synthesized and their electrochemical polymerization were achieved via potential cycling. Optical and electrochemical properties of the polymers, poly(2,7-di(furan-2-yl)-9H-fluoren-9-one) (PFOF), poly(2-(2-(furan-2-yl)-9H-fluoren-7-yl)furan (PFFF) and poly(2-(2-(furan-2-yl)-9,9-dihexyl-9H-fluoren-7-yl)furan) (PFHF) were investigated and it was found that polymer films exhibit reversible redox behavior (Epox = 1.083 V for PFOF, Epox= 0.915 V for PFFF and Epox= 0.985 V for PFHF) accompanied with a reversible electrochromic behavior, orange to green for PFOF, yellow to dark blue for PFFF and orange to green for PFHF during oxidation. Their band gap values (Eg) were found to be 2.32, 2.49 and 2.61 eV for PFOF, PFFF and PFHF, respectively.
|
4 |
Synthèse et caractérisations de nouveaux penta(organo)[60]fullerènes pour la formation d’assemblages supramoléculaires / Synthesis and characterisations of new penta(organo)[60]fullerenes for supramolecular assembliesBusseau, Antoine 11 December 2017 (has links)
La structure unique et les propriétés des fullerènes ont suscité l’intérêt des chercheurs, en particulier dans les domaines de l’électronique et de l’optoélectronique. Dans ce contexte, plusieurs mono- et de poly-adduits du fullerène ont été décrits pour leurs développements comme nouveaux matériaux originaux et comme polymères supramoléculaires. Nous présentons ici les synthèses et les études de nouveaux polymères supramoléculaires donneur-accepteur à base de penta(organo)[60]fullerènes. La parfaite régiosélectivité de la réaction de pentafonctionnalisation sur le [60]fullerène permet de former une cavité conique formée de cinq fragments éthynylaryles. A cette structure, différentes unités électro et/ou photoactives (tétrathiafulvalène et porphyrine de zinc) ont été liés par des liaisons covalentes via cinq réactions de cycloaddition 1,3- dipolaire. Le composé hôte-invité avec ses propriétés donneur-accepteur permet la formation d’assemblages par des interactions supramoléculaires. Nous avons réalisé les synthèses des penta(organo)[60]fullerènes comme nouveaux matériaux donneur-accepteur et nous avons étudié les propriétés des assemblages supramoléculaires en solution et à l’état solide. / The unique structure and properties of fullerenes have attracted wide interest especially in electronic and optoelectronic fields. In this context, a variety of mono-and poly-fullerene adducts have been described for theirs interest in the development of new complex materials and supramolecular polymers. Here, we present the synthesis and studies of new donor-acceptor supramolecular polymers based on penta(organo)[60]fullerenes. The perfect regioselectivity of the [60]fullerene pentafunctionalization reaction has provided us a singular conical structure formed by five ethynylaryl fragments. To this structure different electro and/or photoactive fragments (tetrathiafulvalene or zinc-porphyrin) were covalently linked using five simultaneous 1,3-dipolar cycloaddition reactions. The formed host-cavity together with the donor-acceptor properties of these system allow their assembly by supramolecular interactions. We have realized the synthesis of these penta(organo)[60]fullerenes as new donor-acceptor materials and the studies of their remarkable supramolecular arrangement in solution and solid state.
|
5 |
Ultrafast Photoinduced Energy and Electron Transfer Studies in Closely Bound Molecular and Nanocarbon Donor-Acceptor SystemsGobeze, Habtom Berhane 08 1900 (has links)
As part of the study, photosynthetic system constructs based on BF2-chelated dipyrromethene (BODIPY), BF2-chelated azadipyrromethene (AzaBODIPY), porphyrin, phthalocyanine, oxasmaragdyrin, polythiophene, fullerene (C60), single-walled carbon nanotube and graphene are investigated. Antenna systems of BODIPY dyads and oligomers having BODIPY as an excitation energy donor connected to different acceptors including BODIPY, azaBODIPY, oxasmaragdyrin and aluminum porphyrin are studied. Different synthetic methodologies are used to afford donor-acceptor systems either directly linked with no spacer or with short spacers of varying length and orientation. The effect of donor orientation, donor optical gap as well as nature of donor-acceptor coupling on the donor-acceptor spectral overlap and hence the rate of excitation energy transfer is investigated. In all these systems, an ultrafast energy transfer followed by electron transfer is observed. In particular, in a directly connected BODIPY-azaBODIPY dyad an unusually ultrafast energy transfer (~ 150−200 f) via Förster mechanism is observed. The observation of energy transfer via Förster instead of Dexter mechanism in such closely coupled donor-acceptor systems shows the balance between spatial and electronic coupling achieved in the donor-acceptor system.
Moreover, in donor-acceptor systems involving semiconducting 1D and 2D materials, covalently functionalized single-walled carbon nanotubes via charge stabilizing (TPA)3ZnP and noncovalently hybridized exfoliated graphene via polythiophene chromophores are studied for their charge transportation functions. In both cases, not only an ultrafast charge transfer in the range of (~ 2−5 p) is observed but also the charge-separated states were long lived implying the potential of these functionalized materials as efficient charge transporting substrates with organic chromophores for photovoltaic and optoelectronic applications where ultrafast intercomponent charge transfer is vital. In addition, as a final part of this dissertation, the mechanisms of electron injection and back electron transfer in heterogeneous systems involving supramolecularly anchored high potential chromophores on TiO2 film are studied by femtosecond transient absorption spectroscopy. In this study, not only are important insights gained on the utilization of supramolecular anchoring of chromophores such as porphyrins, phthalocyanines, and their perflorinated high potential analogues, chromophores currently showing promise as highly efficient sensitizers in dye sensitized solar cells, on TiO2 film but also on the effect of anchor length and sensitizer orientation on the rates of electron injection and back electron transfer at the sensitizer-TiO2 interface.
|
6 |
Ultrafast Charge Transfer in Donor-Acceptor Push-Pull ConstructsJang, Young Woo 08 1900 (has links)
Ultrafast charge and electron transfer, primary events in artificial photosynthesis, are key in solar energy harvesting. This dissertation provides insight into photo-induced charge and electron transfer in the donor and acceptor constructs built using a range of donor and acceptor entities, including transition metal dichalcogenides (TMDs, molybdenum disulfide (MoS2), and tungsten disulfide (WS2)), N-doped graphene, diketopyrrolopyrrol (DPP), boron-dipyrromethene (BODIPY), benzothiadiazole (BTD), free base and metal porphyrins, zinc phthalocyanine (ZnPc), phenothiazine (PTZ), triphenylamine (TPA), ferrocene (Fc), fullerene (C60), tetracyanobutadiene (TCBD), and dicyanoquinodimethane (DCNQ). The carefully built geometries and configurations of the donor and (D), acceptor (A), with a spacer in these constructs promote intramolecular charge transfer, and intervalence charge transfer to enhance charge and electron transfer efficiencies. Steady-state UV-visible absorption spectroscopy, fluorescence and phosphorescence spectroscopies, electrochemistry (cyclic voltammetry (CV) and differential pulse voltammetry (DPV)), spectroelectrochemistry (absorption spectroscopy under controlled potential electrolysis), transient absorption spectroscopy, and quantum mechanical calculations (density functional theory, DFT) are used to probe ground and the excited state events as well as excited state charge separation resulting in cation and anion species. The current findings are useful for the increased reliance on renewable energy resources, especially solar energy.
|
7 |
Signature optique d’effet Stark dans une bicouche de CuPc:C60Dion-Bertrand, Laura-Isabelle 11 1900 (has links)
Les hétérojonctions formées de deux matériaux, un donneur et un accepteur (D/A), sont la base de la majorité des mélanges photovoltaïques organiques. Les mécanismes de séparation des charges dans ces systèmes représentent aujourd'hui l'un des sujets les plus chauds et les plus débattus dans ce domaine. Nous entrons au coeur de ce débat en choisissant un système D/A à base de phtalocyanine de cuivre (CuPc) et de fullerène (C60). Pour sonder les états excités de nos molécules et obtenir de l'information sur les phénomènes à l'interface D/A, nous réalisons une expérience pompe-sonde, appelée absorption photoinduite (PIA). Nous y mesurons le changement fractionnaire de transmission au travers de l'échantillon. Les mesures de PIA sont réalisées à l'état de quasi équilibre, à T=10K. Nous observons une modulation prononcée dans la région du photoblanchiment de l'état fondamental qui nous indique que la pompe induit un décalage du spectre d'absorption de l'état fondamental. Ce décalage peut être expliqué par deux processus : soit l'échantillon est chauffé par la pompe (effet thermique) ou bien des charges sont créées à l'interface entre les deux matériaux (effet Stark).
La dépendance en température du spectre d'absorption entre 10K et 290K montre une signature thermique pour un changement de température de 80K. Grâce au ratio des raies Raman anti-Stokes et Stokes, nous démontrons que la pompe chauffe l'échantillon de 34 K, température insuffisante pour attribuer notre signal à un effet thermique. Nous évaporons ensuite la bicouche CuPc/C60 sur de l'ITO et du saphir, substrats qui possèdent des conductivités thermiques différentes et nous observons le même signal de PIA, excluant par le fait même l'hypothèse de l'effet thermique.
Puisque notre étude est comparable à la spectroscopie à effet Stark, nous procédons à une analyse similaire en comparant notre signal de PIA au spectre de la transmittance et à ses dérivés première et seconde. Nous observons alors que notre signal reproduit presque parfaitement la dérivée seconde de la transmittance. Ces résultats sont conformes à une signature optique d'effet Stark due à la création de charges à l'interface D/A. / Nowadays, the donor/acceptor (D/A) structure is one of the most popular configuration for organic solar cells. The charge separation mechanisms in this type of systems is now a hot topic of debate in this field of research. To adress this debate, we choose a D/A system made of copper phthalocyanine (CuPc) and fullerene (C60). In this work, we perform quasi-steady-state photoinduced absorption (PIA) measurements which consist of a pump-probe experiment where we measure the fractional change in transmission through the sample. This experiment probes the excited states of our molecules and gives us informations about the photophysics near the interface between the two materials. The measurements were mainly done at T=10K. We observe a strong modulation of the ground state photobleaching that indicates that the laser excitation induces a shift of the ground state absorption spectrum. This shift can be ascribed to two processes: either the pump is heating the sample (heat transfer) or charge are being created at the interface between the two materials (Stark effect). The temperature dependence of the absorption spectrum between T=10K and T=290K shows a thermal signature for a change in temperature of 80K. By calculating the ratio of the Raman Stokes and anti-Stokes peaks, we establish that the pump heat up the sample of 34K, an insufficient temperature to assign the change of transmittance to a thermal effect. We then evaporate our CuPc/C60 bilayer on ITO and sapphire, two substrates with different thermal conductivities and we observe the same signal thereby excluding the assumption of the thermal effect. Since our study bears a resemblance to Stark spectroscopy, we justify the use of a similar analysis by comparing our PIA signal to the transmittance spectrum of our molecules and its first and second derivative. We find that the signal reproduces almost perfectly the second derivative. Thus, we attribute the aforementioned results to an optical signature of Stark effect due to the creation of charges at the heterojunction.
|
8 |
Dérivés de s-tétrazine et de triphénylamine : du design aux applications / s-Tetrazine and triphenylamine derivatives : from design to applicationsQuinton, Cassandre 15 November 2013 (has links)
Les travaux présentés dans ce mémoire de thèse portent sur la synthèse et l’étude des propriétés spectroscopiques et électrochimiques de systèmes donneur-accepteur conçus pour des applications variées telles que l’électrofluorochromisme, l’absorption à deux photons et le photovoltaïque. La s-tétrazine a été choisie comme accepteur pour sa forte affinité électronique, ses propriétés émissives remarquables et sa capacité à s’organiser via des interactions intermoléculaires de type --stacking. La triphénylamine a été sélectionnée comme donneur pour son faible potentiel d’ionisation, ses propriétés spectroscopiques (fortes absorption et émission) et la modulation facile de ses propriétés par changement de substituants. Sept dérivés de triphénylamine ont été synthétisés ainsi que dix-huit nouveaux composés multichromophoriques à base de tétrazine et de triphénylamine présentant cinq liens différents et des substituants variés. Ils ont été caractérisés par électrochimie et spectroscopie (stationnaire et résolue en temps). L’étude de la modulation de leurs propriétés photophysiques par le changement de l’état rédox a ensuite été réalisée. Dix composés présentant un lien permettant la conjugaison entre la triphénylamine et la tétrazine ont été synthétisés et caractérisés par électrochimie et spectroscopie. Compte-tenu de leurs propriétés, six d’entre eux ont été testés en absorption à deux photons et deux ont étés retenus pour être utilisés comme donneurs dans une cellule photovoltaïque organique. Par ailleurs, deux réactions ont été étudiées en détail pour expliquer la formation des produits obtenus, inattendus à un premier abord. / This work deals with the synthesis and the spectroscopic and electrochemical studies of donor-acceptor systems which have been designed for electrofluorochromism, two-photon absorption and photovoltaics. s-Tetrazine has been chosen as the acceptor for its high electron affinity, its emission properties and its ability to structure a layer thanks to intermolecular interactions (--stacking). Triphenylamine has been selected as the donor for its low ionization potential, its spectroscopic properties (high absorption and emission) and the easy modulation of its properties by changing the substituents. Seven triphenylamine derivatives have been synthesized as well as eighteen new multichromophoric compounds based on tetrazine and triphenylamine which have five different links and various substituents. They have been characterized by electrochemistry and spectroscopy (stationary and time-resolved). The study of the modulation of the photophysic properties with the controle of the redox state has been then done. Ten compounds having a conjugating link between the tetrazine and the tetrazine have been synthesized and characterized by electrochemistry and spectroscopy. Given their properties, six of them have been tested in two-photon absorption and two of them have been selected to be used as a donor in an organic solar cell. Moreover two reactions have been examined in depth in order to explain some unexpected synthesis results.
|
9 |
Excitation Energy Transfer In Donor-Acceptor Systems Involving Metal Nanoparticles, And In Conjugated PolymersSaini, Sangeeta 07 1900 (has links) (PDF)
This thesis consists of two parts and nine chapters. The first part (Part I) presents theoretical studies on non-radiative mode of excitation energy transfer (EET) in donor-acceptor (D-A) systems involving metal nanoparticles. Part I contains four chapters and describes EET in following different D-A systems: (i) dye and a spherical metal nanoparticle of different sizes, (ii) two spherical metal nanoparticles, and (iii) two prolate shaped metal nanoparticles at different relative orientations. Part II provides a detailed study on the origin of photochemical funneling of excitation energy in conjugated polymers like poly-[phenylenevinylene] (PPV) and consists of three chapters. The ninth chapter provides a concluding note.
The thesis begins with a basic introduction on Forster resonance energy transfer(FRET), presented in chapter 1. This chapter provides a detail derivation of Forster’s rate expression for a non-radiative process of EET from a donor to an acceptor molecule and discusses the limitations of Forster theory. The chapter highlights the huge success of FRET technique in understanding biological processes assisted by changes in conformations of biopolymers under conditions where Frster theory is valid. The chapter also discusses practical limitations of FRET technique such as use of pre-averaged value of orientation factor and photobleaching of dye molecules.
Part I starts with chapter 2 which explains the advantages of using metal nanoparticles over dye molecules in D-A systems. The chapter discusses recent experimental re-ports of excitation energy transfer to nanoparticles, now commonly referred to as nanoparticle surface energy transfer (NSET). Theories describing the process of EET from a dye molecule (dye molecule is assumed to be a point dipole) to a planar metallic surface are discussed. In the case of energy transfer from a donor dye molecule to a planar metallic
surface, the distance dependence of the rate of EET is found to vary as 1/d4 where dis a distance from the center of a dye molecule to the metallic surface. This is unlike conven-tional FRET where rate of EET follows 1/R6 distance dependence with R as a distance between the centers of D and A. Also, a recent experimental study by Yun et al [J. Am. Chem. Soc. 127, 3115 (2005)] on energy transfer from a dye molecule to a spherical gold nanoparticle reports that the rate of EET follows 1/d4 distance dependence. The remaining chapters of this part focus on understanding this deviation from the Forster theory in different D-A systems.
Chapter 3 describes quantized electro-hydrodynamic approach used to model the plasmonic excitations in metal nanoparticles. The optical absorption frequencies of nanoparticles computed here are subsequently used in chapters 4 and 5 for the calculation of the rate of EET. The chapter discusses the merits and de-merits of electro-hydrodynamic approach in comparison to other available techniques. The electro-hydrodynamic method of calculating the absorption frequencies provide a physically appealing, mathematically simple and numerically tractable approach to the problem and is also at the same time, semi-quantitatively reliable. The optical frequencies obtained as a function of size and aspect ratio of metal nanoparticles are found to be in good agreement with physical predictions.
Chapter 4 studies the distance dependence of rate of EET for a D-A system similar to one studied by Yun et al [J. Am. Chem. Soc. 127, 3115 (2005)]. The chapter contains the relevant derivations of the quantities required for computing the interaction matrix elements. The dependence of the rate of EET on R is found surprisingly to be in agreement with Forster theory even at intermediate distances compared to the size of spherical nanoparticles (a). However, the dependence of rate of EET on d is found to vary as 1/dσwith σ=3 - 4 at intermediate distances which is in good agreement with the experimental results of Yun et al. At large values of d, the distance dependence of rate is found to vary as 1/d6 . The chapter discusses the physical basis behind these results. The theory predicts a non-trivial dependence of rate on the size of a nanoparticle which ultimately attains the asymptotic a3 size dependence. The rate of EET is also studied for different orientations of dye molecule.
Chapter 5 studies surface plasmon mediated EET between two metal nanoparticles. The rate of EET between two prolate and spherical shaped silver nanoparticles is studied as a function of Rand d. d, in present chapter denotes surface-to-surface separation distance between two nanoparticles. In case of EET between two non-spherical nanoparticles, even at separations larger than the size of the nanoparticle, a significant deviation from 1/R6 dependence is obtained. However, 1/R6 distance dependence of EET rate is found to be robust for spherical nanoparticles over an entire range of separations. The deviation of rate from 1/R6 distance dependence becomes more pronounced with in-crease in the aspect ratio of the nanoparticle. The relative orientation of the nanoparticles is found to markedly influence the R-dependence of EET rate. Interestingly, the relative orientation of nanoparticles effect the d-distance dependence of the rate to a lesser extend in comparison to the R-dependence of the rate. Therefore, we predict that for non-spherical nanoparticles studying EET rate as a function of will provide more conclusive results. The chapter also discusses the size dependence of rate of EET for this particular D-A system.
In Part II, excitation energy transfer (EET) in a conjugated polymer is studied. To start with, chapter 6 provides a brief introduction to photophysics of conjugated polymers. The chapter discusses the nature of photoexcitations in these systems and stresses on the influence of polymer’s morphology on the optical properties of conjugated polymers.
Chapter 7 describes the theory used for modeling conjugated polymer chain. A polymer chain consists of number of spectroscopic units (chromophores) of varying lengths. The average length of chromophores in conjugated polymer depends on defect concentration. In the present study we treat an excitation generated on each chromophore within “particle-in-a-box” formalism but one that takes into account the electron-hole interactions. The transition dipole moments and the radiative rates are computed for different lengths of chromophores with parameters appropriate for PPV chain. These quantities are used in chapter 8 for calculating the absorption and emission spectra of conjugated polymer chains at different defect concentrations.
The main aim of Chapter 8 is to understand the origin of photochemical funneling of excitation energy in conjugated polymers. PPV chain is modeled as a polymer with
the length distribution of chromophores given either by a Gaussian or by a Poissonian distribution. We observe that the Poissonian distribution of length segments explains the optical spectra of PPV rather well than the Gaussian distribution. The Pauli’s master equation is employed to describe the excitation energy transfer among different chromophores. The rate of energy transfer is assumed to be given here, as a first approximation, by the well-known Forster expression. The observed excitation population dynamics confirm the photochemical funneling of excitation energy from shorter to longer chromophores of the polymer chain. The calculations show that even in steady state more than one type of chromophore contribute towards the emission spectrum. The observed difference between the calculated emission spectra at equilibrium and in steady state indicates the existence of local domains in a polymer chain within which the non-radiative excitation energy transfer from shorter to longer chromophores take place. These results are found to be in agreement with recent experimental reports.
The concluding chapter 9 gives a brief summary of the outcome of the thesis and ends up with suggestion of a few future problems which in current scenario are of great interest.
|
Page generated in 0.0621 seconds