Spelling suggestions: "subject:"drill"" "subject:"krill""
71 |
Vad krävs för att genomföra en säker livbåtsövning?Berglund, Frida, Mattisson, Julia January 2017 (has links)
Ombord på samtliga SOLAS-klassificerade fartyg (Safety Of Life At Sea, beskrivs i teorikapitlet) ska regelbundna livbåtsövningar genomföras. Livbåtsövningar innebär en risk för skada på både utrustningen och besättningsmedlemmarna som hanterar den. Syftet med den här studien är att utreda vad som krävs för att en livbåtsövning ska kunna genomföras på ett säkert sätt. Syftet besvaras genom att prata med besättningsmedlemmar som är med att skapa och har mycket erfarenhet av säkra livbåtsövningar. Det är en kvalitativ studie där total tio besättningsmedlemmar har intervjuats. Resultatet visar att säkerheten under en livbåtsövnings är beroende av fyra faktorer; utrustning, kompetens, samarbete och motivation. Dessa fyra faktorer arbetades fram under studiens gång och är baserade på tidigare utredningar, forskning och arbetets intervjusvar. Dessa delar påverkar varandra i nämnd ordning och om alla fyra delarna fungerar så kommer livbåtsövningen genomföras på ett säkert sätt. / Frequent abandon ship drills should be carried out on every ship covered by SOLAS (Safety Of Life At Sea, explained in the theoretical chapter). Abandon ship drill entails a risk of damage to the equipment and injury to the people handling it. The purpose of this study is to see into what is required to achieve a safe abandon ship drill. This is a qualitative study where the objective is answered by interviewing crew members that has experience of creating safe abandon ship drills. A total of ten crewmembers has been interviewed. The study shows that the safety of these drills is dependant on four factors; equipment, knowledge, cooperation and motivation. These factors where derived from previous reports, research and from the data obtained from the interviews. These factors are dependant on one another and can also be viewed as a spiral where one factor gives momentum to the next.
|
72 |
Volba a optimalizace řezných podmínek pro progresivní výrobní technologie vrtání sdruženým nástrojem / Data selection and optimisation of cutting conditions for progressive production technologies of drilling with a step drillBarák, Vít January 2015 (has links)
The thesis contains theoretical analysis of drilling by twist drill focused on the step drill. The review includes description of the drill geometry, calculation of the basic parameters of drilling, including forces and process optimization. Following is manufacturing process and analysis of the monolithic step drill designed for the required hole parameters. The optimal cutting conditions are necessary to find for the correct function of the tool. The load values of the tool are accurately assessed using a piezoelectric dynamometer, thereby obtaining the overall progress of individual loads. The roughness of the workpiece is evaluated by the optical measuring device.
|
73 |
An experimental investigation into tool wear in micro-drilling of aluminium, aluminium/copper metal alloys and carbon fibre reinforced compositesCheng, Ming-Yi January 2017 (has links)
Limitation of conventional machining equipment has become a growing concern over the past two decades due to the demands for greater machining accuracy in today’s manufacturing. The development of micro-machining has therefore attracted significant attention; it signifies the advancement of national economy as well as the level of accuracy manufacturing industry could achieve. While the connection between tool lifespan, cost of machining and throughput is well established, the factor of tool lifespan appears to have more significance since the miniaturization of tool could lead to further performance concerns such as its lack of strength and durability. On the other hand, raising feed rate and spindle rotation speed are the two common approaches for increasing manufacturing throughput. Such approaches tend to cause an increase in the thrust force subjecting the tool to greater stress, which is the main cause of tool wear and even tool failure. Through literature review and preliminary experiments, it was found that spot-drill is often done prior to micro-drilling since it prepares a pre-drill countersunk hole that helps the alignment of tool for subsequent micro-drilling. Although such pre-drill step does improve the micro-drilling operation, the fundamental issue of tool diameter difference still remains. Often the tool used for pre-drill has a bigger diameter than the one for micro-drilling although a significant difference is always something to be avoided. This is because the difference has to be picked up by the tool used for micro-drilling and is directly linked to the wear caused by increased thrust force. In this research the operation of micro-drilling is investigated via mathematical models. Such operation is further broken down into various steps and stages so more detailed description can be achieved. The findings are then further enhanced by simulation based on the 3D model of micro-drilling. Three materials were selected for this research: Al 6061T, Al/Cu metal alloy panel and Carbon fibre reinforced composites. Such a selection enables the study of individual characteristics of different materials and the variation in respective thrust forces. Finally, Conclusions present the summary of the main findings from micro-drilling process analysis based on research and investigation shown in earlier chapters. By combining actual measurements on micro-drilling and mathematic model this research hopefully would improve the understanding towards micro-drilling processes.
|
74 |
Evaluation of a Programmable Hydraulic Valve for Drill Rig Applicationsde Brun Mangs, Jonathan, Tillquist, Mikael January 2018 (has links)
The increase of intelligent systems can be seen in every industry. Integrated sensors and processors are used with internal control systems to create better performance for mobile hydraulic applications. The report describes how an evaluation was made to see if the productivity of a drill rig could be increased. This was done by implementing a programmable hydraulic valve to control the hydraulic drilling functions. The productivity would be increased by reducing the downtime due to jamming in the drill hole. Jamming occur when the system does not compensate for changes in rock conditions. By conducting a series of tests in a controlled environment with simulated loads, the response time of the CMA system and original system could be determined and compared. The CMA system had a response time that was 60-64% faster than the original system. Two different implementations of a controller was tested. Ziegler-Nichols method was used to get the initial value of the PI parameters. The controller that was implemented onboard the valve’s CPU was considered more successfull to reduce jamming. A drill test was conducted to ensure that the programmable valve could handle a drilling procedure with the controller that was implemented onboard the valve’s CPU. The valve handled the drilling procedure well.
|
75 |
Failure Inference in Drilling Bits: : Leveraging YOLO Detection for Dominant Failure AnalysisAkumalla, Gnana Spandana January 2023 (has links)
Detecting failures in tricone drill bits is crucial in the mining industry due to their potential consequences, including operational losses, safety hazards, and delays in drilling operations. Timely identification of failures allows for proactive maintenance and necessary measures to ensure smooth drilling processes and minimize associated risks. Accurate failure detection helps mining operations avoid financial losses by preventing unplanned breakdowns, costly repairs, and extended downtime. Moreover, it optimizes operational efficiency by enabling timely maintenance interventions, extending the lifespan of drill bits, and minimizing disruptions. Failure detection also plays a critical role in ensuring the safety of personnel and equipment involved in drilling operations. Traditionally, failure detection in tricone drill bits relies on manual inspection, which can be time-consuming and labor-intensive. Incorporating artificial intelligence-based approaches can significantly enhance efficiency and accuracy. This thesis uses machine learning methods for failure inference in tricone drill bits. A classic Convolutional Neural Network (CNN) classification method was initially explored, but its performance was insufficient due to the small dataset size and imbalanced data. The problem was reformulated as an object detection task to overcome these limitations, and a post-processing operation was incorporated. Data augmentation techniques enhanced the training and evaluation datasets, improving failure detection accuracy. Experimental results highlighted the need for revising the initial CNN classification method, given the limitations of the small and imbalanced dataset. However, You Only Look Once (YOLO) algorithms such as YOLOv5 and YOLOv8 models exhibited improved performance. The post-processing operation further refined the results obtained from the YOLO algorithm, specifically YOLOv5 and YOLOv8 models. While YOLO provides bounding box coordinates and class labels, the post-processing step enhanced drill bit failure detection through various techniques such as confidence thresholding, etc. By effectively leveraging the YOLO-based models and incorporating post-processing, this research advances failure detection in tricone drill bits. These intelligent methods enable more precise and efficient detection, preventing operational losses and optimizing maintenance processes. The findings underscore the potential of machine learning techniques in the mining industry, particularly in mechanical drilling, driving progress and enhancing overall operational efficiency
|
76 |
Double-Sided Pressure Sensitive Adhesive Tape : "As a Non-Drill Solution in Bathroom Environments"Lind, Martin Nilsson, Petersson, Daniel, Petersson, Erik January 2014 (has links)
The IKEA customers are looking for new solutions to mount products in their homes and IKEA has embraced the request for this type of applications in bathroom environments as it is of the largest challenges for the customer. Double sided tape has been identified as a possible solution, hence why this project was put together. The research aims to give the reader a deeper understanding regarding double sided tape and the influences of external variables such as material, substrate and surface tension to mention a few. Extensive tests have been carried out where samples from double sided tape suppliers are examined. The test that was developed and carried out in this project aimed to include some of IKEA´s most commonly used materials together with common substrates in bathroom environments. The test data was compiled and the outcome was used to give recommendations to IKEA regarding future product development when using double sided tape and also recommend suitable tape suppliers for continued cooperation.
|
77 |
A Computer Assisted Drill and Practice System for Introductory Statistics InstructionEllis, Richard George 05 1900 (has links)
To supplement college introductory statistics instruction, an interactive drill system was developed and implemented on a Hewlett- Packard 2000 timesharing computer. Unlimited practice in basic procedures and algorithms was provided over 38 topics including Chi-square, correlational methods, and one-way analysis of variance. Validation of intermediate computational steps was provided, and more difficult or remedial problems sets were made available. Optional files recorded performance data. Four support programs initialized performance files and generated summary reports. Extensive documentation and a library of reusable subroutines were designed to assist future authors to expand the system. The drill and practice system was made generally available to all university departments and students.
|
78 |
Last Known TomorrowWormington, Larry J 20 December 2013 (has links)
N/A
|
79 |
Respirable dust and quartz exposure of rock drill operators in two Free State gold minesKemsley, Daniel Michel 16 September 2009 (has links)
Introduction It is well established that gold mine dust is a major cause of pneumoconiosis and other lung diseases. The main sources of dust in gold mines are well documented. Rock drill operators using pneumatic percussion rock drills are at the sharp end of exposure due to the very nature of the drilling process in that rock is pulverized and liberate large amounts of dust even with the addition of copious amounts of water. Historically it has been found that the gold bearing rock formations in South Africa typically contain about 30% quartz. (1) Keeping this in mind, the potential for overexposure is obvious. The actual exposure of rock drill operators to dust and quartz is not well documented and for this reason this research focuses on this particular occupation. Objectives To measure the respirable dust and quartz exposure of Rock Drill Operators in two typical gold mines in the Free State province of South Africa in 2007. Methods
This study is a descriptive, cross sectional, rapid assessment based on the findings of gravimetric sampling results taken at Rock Drill Operators working underground on two different gold mines. The actual gravimetric sampling was done in accordance with NIOSH methodology. The study population consisted of 30 Rock Drillers on one mine and another 30 on a second mine. The Rock Drill Operators was randomly selected using their company numbers and selected by the “Excel” program random number selection function. Ordinary gravimetric sampling, using Gillair pumps, was used and weighing done on the mine by a qualified and well experienced Air Quality Analyst using an appropriate methodology compatible with international best practices. Quartz analysis was done at the National Institute for Occupational Health (NIOH) in Johannesburg using a Phillips X-Ray diffraction. (Photo 2). The methodology used by the laboratory technician is conducted strictly according to the manufacturer’s specifications and in line with international best
5
practices. This laboratory participates in quality assurances programmes and is highly regarded internationally. Results The initial hypothesis that exposure underestimation in the past in terms of this particular occupation is confirmed and could be contributable to the difficulties typically experienced when using the traditional gravimetric sampling method. The average quartz percentage was determined to be 25.45% for mine 1 and 38.49% for mine 2 giving an average of 30.67% for both mines. The Total Mass means was 0.73 and 0.23 mg for mine 1 and 2 respectively with an average for the two mines being 0.49 mg. Results for Time Weighted Averages revealed values of 0.69 and 0.22 mg/m3 for mine 1 and 2 respectively with an average of 0.46 mg/m3 for both. In terms of Air Quality Index (AQI) the values were 1.4 and 0.6 for mine 1 and 2 respectively with an average for both mines therefore being 1.1. A comparison with the South African OEL for quartz showed overexposure on 32% of all rock drill operators sampled. When using the NIOSH OEL that figure is even worse at 72%. Based on these results it would thus be fair to conclude that Rock drill operators working without appropriate respiratory equipment will be overexposed and therefore potentially suffer ill health as a result. Discussion and conclusion
Rock drill operators are potentially exposed to high levels of harmful dust and quartz in their normal daily work if not adequately protected using good, effective appropriate and comfortable respiratory protective equipment (RPE) and additionally having proper ventilating velocity. At an average Air Quality Index (AQI) of 1.1, it would require the mine Occupational Hygienist to immediately institute remedial action in conjunction with an investigation to determine the reasons for such overexposure. The AQI of 1.46 and 0.6 for Mine 1 and 2 respectively curiously beg the question as to why there is a difference. The answer unfortunately is not clear at first glance as both mines wetted the stope working faces equally well, ventilates the faces with similar velocities
which in turn alludes to similar dilution factors but the only reasonable deduction that could be made is that high TWA respirable quartz pollutant concentrations (mg/m3) values in lots of cases corresponded with low actual quartz values. This could be co-incidental but in fact caused the TWA graph to be inversely proportional to the AQI graph. Couple this to the fact that the actual dust burden is lower in Mine 2 compared to Mine 1 as confirmed by the TWA values obtained, then the results becomes easier to interpret. However, the assumption is made that the TWA values should enjoy more preference in the analytical sense as it could be compared directly to OEL’s which serves to highlight the hypothesis very clear in that rock drill operators are over exposed to a high degree of certainty which in turn concurs with other research done in the past.
The fact that the methods used to drill holes in order to be charged up with explosives has largely remained unchanged for more decades in the mining industry with no viable alternative on the horizon, emphasizes the fact that focused attention and proper risk assessment is called for to protect rock drill operator from harmful exposure. That said the normal paper dust mask cannot in all good conscience be regarded as appropriate RPE for this occupation. The aforementioned risk assessment must determine and ultimately classify which occupations would benefit from “upgrading” to better quality dust masks. To accept only one type of dust mask on a mine would be considered a travesty and contrary to the application of all good occupational hygiene principles. Failing to expedite the aforementioned risk assessment on RPE per occupation will result in failure to place effective safeguard measures in place to protect rock drill operators from harmful dust and will mean that their health will be compromised in time. The development of air line fed type hard hats incorporating a face shield, harness fitted with moisture trap, filter and a snap fit attachment to a compressed air line is likely to be the ultimate solution provided that it is light, comfortable and the introduction is done in a manner that will ensure the understanding in the benefits to be derived from using such a device in the place of ordinary dust masks by Rock
7
Drill Operators. Ultimately, using the Occupational Hygiene hierarchy of control that dictates the first consideration of such control being elimination, coupled with the horrendous ergonomic problems faced by rock drill operators, the solution seems to point inevitably towards meganisation. Using a person in the same homogeneous exposure group (HEG) as that of the rock drill operator as a forced alternative is not advisable as the exposure of a rock drill operator is very unique and certainly not comparable to that of a winch driver for example. The wet environment certainly warrants the investigation into alternative methods for sampling as normal, traditional methods proved to be inconsistent, unreliable and often unusable.
|
80 |
Modeling and experimental identification of torsional drill string dynamics under uncertainties / Modélisation et identification expérimentale de la dynamique torsion d'une colonne de forage en présence d'incertitudesReal, Fabio 23 November 2018 (has links)
This D.Sc. thesis proposes new perspectives for modeling drill string torsional dynamics under uncertainties. This work develops a novel stochastic hysteretic (nonreversible) bit-rock interaction model. Firstly, a new nominal interaction model, which depends not only on the bit speed, but also on the bit acceleration is developed. Then, a new stochastic model for the bit-rock interaction, taking into account the inherent fluctuations during the drilling, is also proposed. Furthermore, here a new test-rig is proposed to analyze drill string dynamics and bit-rock interaction, which is able to reproduce stick-slip phenomena while drilling a rock sample using standard masonry bits, as well as to validate bit-rock interaction models. An original strategy for modeling uncertainties globally, based on terms of the nonparametric probabilistic approach, considering a simple torsional model for a drill string, is also proposed herein. This strategy allows to control the dispersion level of each interior and interface DOFs of each drill string substructure independently, which can provide more information to improve the operational safety. / This D.Sc. thesis proposes new perspectives for modeling drill string torsional dynamics under uncertainties. This work develops a novel stochastic hysteretic (nonreversible) bit-rock interaction model. Firstly, a new nominal interaction model, which depends not only on the bit speed, but also on the bit acceleration is developed. Then, a new stochastic model for the bit-rock interaction, taking into account the inherent fluctuations during the drilling, is also proposed. Furthermore, here a new test-rig is proposed to analyze drill string dynamics and bit-rock interaction, which is able to reproduce stick-slip phenomena while drilling a rock sample using standard masonry bits, as well as to validate bit-rock interaction models. An original strategy for modeling uncertainties globally, based on terms of the nonparametric probabilistic approach, considering a simple torsional model for a drill string, is also proposed herein. This strategy allows to control the dispersion level of each interior and interface DOFs of each drill string substructure independently, which can provide more information to improve the operational safety
|
Page generated in 0.0382 seconds