Indiana University-Purdue University Indianapolis (IUPUI) / Traffic accidents cause millions of injuries and tens of thousands of fatalities per year worldwide. This thesis briefly reviews different types of active safety systems designed to reduce the number of accidents. Focusing on lane departure, a leading cause of crashes involving fatalities, we examine a lane-keeping system proposed by Minoiu Enache et al.They proposed a switched linear feedback (LMI) controller and provided two switching laws, which limit driver torque and displacement of the front wheels from the center of the lane. In this thesis, a state feedback (LQR) controller has been designed. Also, a new switching logic has been proposed which is based on driver's torque, lateral offset of the vehicle from the center of the lane and relative yaw angle. The controller activates assistance torque when the driver is deemed inattentive. It is deactivated when the driver regains control. Matlab/Simulink modeling and simulation environment is used to verify the results of the controller. In comparison to the earlier switching strategies, the maximum values of the state variables lie very close to the set of bounds for normal driving zone. Also, analysis of the controller’s root locus shows an improvement in the damping factor, implying better system response.

M.Ing. (Electrical and Electronic Engineering) / Adaptive Cruise Control (ACC) is proposed to assist drivers tedious manual acceleration or braking of the vehicle, as well as with maintaining a safe headway time gap. This thesis proposes, simulates, and implements a vision-based ACC system which uses a single camera to obtain the clearance distance between the preceding vehicle and the ACC vehicle. A three-step vehicle detection framework is used to obtain the position of the lead vehicle in the image. The vehicle coordinates are used in conjunction with the lane width at that point to estimate the longitudinal clearance range. A Kalman filter filters this range signal and tracks the vehicle’s longitudinal position. Since image processing algorithms are computationally intensive, this document addresses how adaptive image cropping improves the update frequency of the vision-based range sensor. A basic model of a vehicle is then derived for which a Proportional-Integral (PI) controller with gain scheduling is used for ACC. A simulation of the system determines whether the ACC algorithm will work on an actual vehicle.

A segurança no tráfego de carros é um assunto em foco nos dias de hoje e, dentro dele, podem-se citar os sistemas de auxílio ao motorista que vêm sendo desenvolvidos com a finalidade de reduzir o grande número de fatalidades em acidentes de trânsito. Tais sistemas de auxílio buscam mitigar falhas humanas como falta de atenção e imprudência. Visto isso, o projeto SENA, desenvolvido pelo Laboratório de Robótica Móvel da Escola de Engenharia de São Carlos, busca contribuir com a evolução dessa assistência ao motorista. O presente trabalho realiza um estudo sobre uma técnica de inteligência artificial chamada de Redes Bayesianas. Essa técnica merece atenção em virtude de sua capacidade de tratar dados incertos em forma de probabilidades. A rede desenvolvida por esse trabalho utiliza, como dados de entrada, os classificadores em desenvolvimento no projeto SENA e tem como resposta um comportamento que o veículo deve executar, por um ser humano ou por um planejador de trajetórias. Em função da alta dimensionalidade do problema abordado, foram realizados dois experimentos em ambiente simulado de duas situações distintas. A primeira, um teste de frenagem próximo a um ponto de intersecção e a segunda, um cenário de entroncamento. Os testes feitos com a rede indicam que classificadores pouco discriminantes deixam o sistema mais propenso a erros e que erros na localização do ego-veículo afetam mais o sistema se comparado a erros na localização dos outros veículos. Os experimentos realizados mostram a necessidade de um sistema de tempo real e um hardware mais adequado para tratar as informações mais rapidamente / The safety of cars in traffic scenarios is being addressed on the past few years. One of its topics is the Advanced Driver-Assistance Systems which have been developed to reduce the fatality numbers of traffic accidents. These systems try to decrease human failures, such as imprudence and lack of attention while driving. For these reasons, the SENA project, in progress on the Mobile Robotics Laboratory at the Sao Carlos School of Engineering (EESC), aims to contribute for the evolution of these assistance systems. This work studies an artificial intelligence technique called Bayesian Networks. It deserves our attention due to its capability of handling uncertainties with probability distributions. The network developed in this Masters Thesis has, as input, the result of the classifiers used on SENA project and has, as output, a behavior which has to be performed by the vehicle with a driver or autonomously by the means of a path planner. Due to the high dimensionality of this issue, two different tests have been carried out. The first one was a braking experiment near a intersection point and the other one was a T-junction scenario. The tests made indicate that weak classifiers leaves the system more instable and error-prone and localization errors of the ego-vehicle have a stronger effect than just localization errors of other traffic participants. The experiments have shown that there is a necessity for a real-time system and a hardware more suitable to deal quickly with the information

Le mouvement en essaim est défini par l'action d'un ensemble d'individusautopropulsés se déplaçant en groupe uniquement à l’aide de la connaissance locale de leur environnement.L'objectif scientifique de la thèse consiste à mettre en oeuvre ce type demodèle de comportement appliqué à un flot de véhicules se déplaçant sur un profilroutier, et ce afin d'assister le conducteur dans ses actions à la fois pour son confortet sa sécurité.A partir de l’analyse d’une synthèse bibliographique, une stratégie dehiérarchisation a été mise en place afin de créer un système d’aide à la conduite ouADAS (de l’anglais « Advanced Driver Assistance System »). Ainsi, dans un premiertemps, il s’agit de générer une trajectoire à partir de ce type de modèle qui respecteles contraintes autoroutières. Ensuite, la dynamique du véhicule est prise en compteafin de transmettre au conducteur via une régulation de vitesse et un retour haptiqueau volant, les deux étant basés notamment sur la commande CRONE, lesmanoeuvres nécessaires au suivi de cette trajectoire. Enfin, le système d’aide à laconduite est mis en oeuvre, non seulement sur un simulateur dynamique de conduiteafin de recueillir le ressenti des conducteur, mais aussi au sein d’un logiciel desimulation de trafic pour évaluer les gains obtenus dans le cas d’un ensemble devéhicules équipés. / Swarm behavior refers to individuals travelling in a group and using only localknowledge of their environment.The scientific objective of the thesis is to implement this type of behaviormodel to vehicles traveling on road, in order to assist the driver in his actions for bothits comfort and security.From a literature review, a prioritization strategy was set up to create anAdvanced Driver Assistance System (ADAS). At first, it is to generate a path from thistype of model that respects the motorway constraints. Then, vehicle dynamics istaken into account in order to transmit to the driver through cruise control and hapticfeedback steering wheel, both based on the CRONE control, maneuvers needed tofollow this trajectory. Finally, the driver assistance system is not only implemented ona dynamic driving simulator to gather driver’s feelings but it is also implemented intraffic simulation software to evaluate gains obtained for a set of equipped vehicles.

<p>Models based on micro-simulation of traffic flows have proven to be useful tools in the study of various traffic systems. Today, there is a wealth of traffic microsimulation models developed for freeway and urban street networks. The road mileage is however in many countries dominated by rural highways. Hence, there is a need for rural road traffic simulation models capable of assessing the performance of such road environments. This thesis introduces a versatile traffic micro-simulation model for the rural roads of today and of the future. The developed model system considers all common types of rural roads including effects of intersections and roundabouts on the main road traffic. The model is calibrated and validated through a simulation study comparing a two-lane highway to rural road designs with separated oncoming traffic lanes. A good general agreement between the simulation results and the field data is established.</p><p>The interest in road safety and the environmental impact of traffic is growing. Recent research has indicated that traffic simulation can be of use in these areas as well as in traditional capacity and level-of-service studies. In the road safety area more attention is turning towards active safety improving countermeasures designed to improve road safety by reducing the number of driver errors and the accident risks. One important example is Advanced Driver Assistance Systems (ADAS). The potential to use traffic simulation to evaluate the road safety effects of ADAS is investigated in the last part of this thesis. A car-following model for simulation of traffic including ADAS-equipped vehicles is proposed and the developed simulation framework is used to study important properties of a traffic simulation model to be used for safety evaluation of ADAS. Driver behavior for ADAS-equipped vehicles has usually not been considered in simulation studies including ADAS-equipped vehicles. The work in this thesis does however indicate that modeling of the behavior of drivers in ADAS-equipped vehicles is essential for reliable conclusions on the road safety effects of ADAS.</p> / Report code: LiU-Tek-Lic-2005:60.

Navigation systems are one of the most commonly found electronic gadgets in modern vehicles nowadays. Alongside navigation units this technology is made readily available to individuals in everyday devices such as a mobile phone. Digital maps which come preloaded on these devices accommodate within them an extensive dataset of spatial information from around the globe which aids the driver in achieving a well guided driving experience. Apart from being essential for navigation this sensor information backs up other vehicular applications in making intelligent decisions. The quality of this information delivered is in direct relation to the underlying dataset used to produce these maps. Since we live in a highly dynamic environment with constantly changing geography, an effort is necessary to keep these maps updated with the most up to date information as frequently as possible. The digital map of interest in this study is OpenStreetMap, the underlying data of which is a combination of donated as well as crowdsourced information from the last 10 years. This extensive dataset helps in building of a detailed digital map of the world using well defined cartographic techniques. The information within OpenStreetMap is currently enhanced by a large group of volunteers who willing use donated satellite imagery, uploaded GPS tracks, field surveys etc. to correct and collect necessary data for a region of interest. Though this method helps in improving and increasing the quality and quantity of the OpenStreetMap dataset, it is very time consuming and requires a great deal of human effort. Through this thesis an effort is made to automatically enrich this dataset by preprocessing crowdsourced sensor data collected from the navigation system and driver assistance systems (Traffic Sign Recognition system and a Lane Detection System) of a driving vehicle. The kind of data that is algorithmically derived includes the calculation of the curvature of the underlying road, correction of speed limit values for individual road segments being driven and the identification of change in the geometry of existing roads due to closure of old ones or addition of new ones in the Nuremberg region of Bavaria, Germany. Except for a small percentage of speed limit information on roads segments, other information is currently not available in the OpenStreetMap database for use in safety and comfort related applications. The navigation system has the ability to deliver geographical data in form of GPS coordinates at a certain frequency. This set of GPS coordinates can grouped together to form a GPS track visualizing the actual path traversed by a driving vehicle. A large number of such GPS tracks repeatedly collected from different vehicles driving in a region of interest gives all GPS points which lie on a particular road. These points, after outlier elimination methods are used as a dataset to scientifically determine the underlying curvature of the road with the aid of curve fitting techniques. Additional information received from the lane detection system helps identify curves on a road for which the curvature must be calculated. The fusion of information from these sources helps to achieve curvature results with high accuracy. Traffic sign recognition system helps detect traffic signs while driving, the fusion of this data with geographical information from the navigation system at the instance of detection helps determine road segments for which the recognized speed limit values are valid. This thesis successfully demonstrates a method to automatically enrich OpenStreetMap data by crowdsourcing raw sensor data from multiple vehicles equipped with driver assistance systems. All OpenStreetMap attributes were 100% updated into the database and the results have proven the effectiveness our system architecture. The positive results obtained in combination with minimal errors promise a better future for assisted driving.

The demand for Advanced Driver Assistance System (ADAS) applications is increasing day by day and their development requires efficient prototyping and real time testing. ADTF (Automotive Data and Time Triggered Framework) is a software tool from Elektrobit which is used for Development, Validation and Visualization of Vision based applications, mainly for ADAS and Autonomous driving. With the help of ADTF tool, Image or Video data can be recorded and visualized and also the testing of data can be processed both on-line and off-line. The development of ADAS applications needs image and video processing and the algorithm has to be highly efficient and must satisfy Real-time requirements. The main objective of this research would be to integrate OpenCV library with ADTF cross platform. OpenCV libraries provide efficient image processing algorithms which can be used with ADTF for quick benchmarking and testing. An ADTF filter framework has been developed where the OpenCV algorithms can be directly used and the testing of the framework is carried out with .DAT and image files with a modular approach. CMake is also explained in this thesis to build the system with ease of use. The ADTF filters are developed in Microsoft Visual Studio 2010 in C++ and OpenMP API are used for Parallel programming approach.

Modern automobiles and particularly those with off-road lineage possess subsystems that can be configured to better negotiate certain terrain types. Different terrain classes amount to different adherence (or surface grip) and compressibility properties that impact vehicle ma-noeuvrability and should therefore incur a tailored throttle response, suspension stiffness and so on. This thesis explores prospective terrain recognition for an anticipating terrain response driver assistance system. Recognition of terrain and road terrain is cast as a semantic segmen-tation task whereby forward driving images or point clouds are pre-segmented into atomic units and subsequently classified. Terrain classes are typically of amorphous spatial extent con-taining homogenous or granularly repetitive patterns. For this reason, colour and texture ap-pearance is the saliency of choice for monocular vision. In this work, colour, texture and sur-face saliency of atomic units are obtained with a bag-of-features approach. Five terrain classes are considered, namely grass, dirt, gravel, shrubs and tarmac. Since colour can be ambiguous among terrain classes such as dirt and gravel, several texture flavours are explored with scalar and structured output learning in a bid to devise an appropriate visual terrain saliency and predictor combination. Texture variants are obtained using local binary patters (LBP), filter responses (or textons) and dense key-point descriptors with daisy. Learning algorithms tested include support vector machine (SVM), random forest (RF) and logistic regression (LR) as scalar predictors while a conditional random field (CRF) is used for structured output learning. The latter encourages smooth labelling by incorporating the prior knowledge that neighbouring segments with similar saliency are likely segments of the same class. Once a suitable texture representation is devised the attention is shifted from monocular vision to stereo vision. Sur-face saliency from reconstructed point clouds can be used to enhance terrain recognition. Pre-vious superpixels span corresponding supervoxels in real world coordinates and two surface saliency variants are proposed and tested with all predictors: one using the height coordinates of point clouds and the other using fast point feature histograms (FPFH). Upon realisation that road recognition and terrain recognition can be assumed as equivalent problems in urban en-vironments, the top most accurate models consisting of CRFs are augmented with composi-tional high order pattern potentials (CHOPP). This leads to models that are able to strike a good balance between smooth local labelling and global road shape. For urban environments the label set is restricted to road and non-road (or equivalently tarmac and non-tarmac). Ex-periments are conducted using a proprietary terrain dataset and a public road evaluation da-taset.

A segurança no tráfego de carros é um assunto em foco nos dias de hoje e, dentro dele, podem-se citar os sistemas de auxílio ao motorista que vêm sendo desenvolvidos com a finalidade de reduzir o grande número de fatalidades em acidentes de trânsito. Tais sistemas de auxílio buscam mitigar falhas humanas como falta de atenção e imprudência. Visto isso, o projeto SENA, desenvolvido pelo Laboratório de Robótica Móvel da Escola de Engenharia de São Carlos, busca contribuir com a evolução dessa assistência ao motorista. O presente trabalho realiza um estudo sobre uma técnica de inteligência artificial chamada de Redes Bayesianas. Essa técnica merece atenção em virtude de sua capacidade de tratar dados incertos em forma de probabilidades. A rede desenvolvida por esse trabalho utiliza, como dados de entrada, os classificadores em desenvolvimento no projeto SENA e tem como resposta um comportamento que o veículo deve executar, por um ser humano ou por um planejador de trajetórias. Em função da alta dimensionalidade do problema abordado, foram realizados dois experimentos em ambiente simulado de duas situações distintas. A primeira, um teste de frenagem próximo a um ponto de intersecção e a segunda, um cenário de entroncamento. Os testes feitos com a rede indicam que classificadores pouco discriminantes deixam o sistema mais propenso a erros e que erros na localização do ego-veículo afetam mais o sistema se comparado a erros na localização dos outros veículos. Os experimentos realizados mostram a necessidade de um sistema de tempo real e um hardware mais adequado para tratar as informações mais rapidamente / The safety of cars in traffic scenarios is being addressed on the past few years. One of its topics is the Advanced Driver-Assistance Systems which have been developed to reduce the fatality numbers of traffic accidents. These systems try to decrease human failures, such as imprudence and lack of attention while driving. For these reasons, the SENA project, in progress on the Mobile Robotics Laboratory at the Sao Carlos School of Engineering (EESC), aims to contribute for the evolution of these assistance systems. This work studies an artificial intelligence technique called Bayesian Networks. It deserves our attention due to its capability of handling uncertainties with probability distributions. The network developed in this Masters Thesis has, as input, the result of the classifiers used on SENA project and has, as output, a behavior which has to be performed by the vehicle with a driver or autonomously by the means of a path planner. Due to the high dimensionality of this issue, two different tests have been carried out. The first one was a braking experiment near a intersection point and the other one was a T-junction scenario. The tests made indicate that weak classifiers leaves the system more instable and error-prone and localization errors of the ego-vehicle have a stronger effect than just localization errors of other traffic participants. The experiments have shown that there is a necessity for a real-time system and a hardware more suitable to deal quickly with the information

Objective: State-of-the-art collision avoidance and collision mitigation systems predict the behavior of pedestrians based on trivial models that assume a constant acceleration or velocity. New sources of sensor information—for example, smart devices such as smartphones, tablets, smartwatches, etc.—can support enhanced pedestrian behavior models. The objective of this article is the development and implementation of a V2Xpedestrian collision avoidance system that uses new information sources. Methods: A literature review of existing state-of-the-art pedestrian collision avoidance systems, pedestrian behavior models in advanced driver assistance systems (ADAS), and traffic simulations is conducted together with an analysis of existing studies on typical pedestrian patterns in traffic. Based on this analysis, possible parameters for predicting pedestrian behavior were investigated. The results led to new requirements from which a concept was developed and implemented. Results: The analysis of typical pedestrian behavior patterns in traffic situations showed the complexity of predicting pedestrian behavior. Requirements for an improved behavior prediction were derived. A concept for a V2X collision avoidance system, based on a cost function that predicts pedestrian near future presence, and its implementation is presented. The concept presented considers several challenges such as information privacy, inaccuracies of the localization, and inaccuracies of the prediction. Conclusion: A concept for an enhanced V2X pedestrian collision avoidance system was developed and introduced. The concept uses new information sources such as smart devices to improve the prediction of the pedestrian's presence in the near future and considers challenges that come along with the usage of these information sources.