A new method is developed for experimentally determining the system parameters of a structure that is suitable for implementation in microprocessor-based systems. It uses single degree-of-freedom models to describe a multi-degree-of-freedom system. The system is assumed to be describable by a linear, proportionally and lightly damped, lumped parameter model. Two types of damping models, viscous and structural damping, are provided. The effective mass, stiffness, and damping are obtained by fitting the experimental data in the inverse Nyquist plane. The effective mass, stiffness, and damping are convertible to global modal mass, stiffness, and damping through normal mode corrections. Then a physical space mathematical model may be assembled from the modal properties for complete and truncated modal vector system descriptions. Therefore, this method will deal with the general case where the number of degree-of-freedom exceeds the number of identified modes. After a mathematical model is developed, different ways of modifying the structure analytically are investigated. This modified model is used to predict the new dynamic characteristics of the modified structure due to changes in its mass, stiffness, or damping properties. There are three ways that modifications can be made. They are: l) modifications made in the physical coordinates model; 2) modifications made in both the physical and modal coordinates models; and 3) modifications made in the modal coordinates model. The last way is found to be the most efficient way; therefore, model modifications should be done totally in modal spaces, modal space I and II. The derivation of mass, stiffness, and damping modification matrices for general structure is also presented. The resonance specification and frequency response function synthesis are two useful techniques that aid in system modification and are, therefore, included. A resonant peak can be shifted to another frequency by making certain modifications to the structure, thus avoiding undesired vibration. The resonance specification will determine the amount of physical change needed. It is not practical to store all the frequency response function measurements of a structure during testing. Therefore, a frequency response function synthesis is needed, such that any one can be synthesized from the model developed. A theoretical three degree-of-freedom system and two experimental systems--a square plate and a C-clamp--were used to verify the techniques developed. / Ph. D.

An analytical technique for determining the damped or undamped critical speeds and generating a critical speed map for a general flexible rotor in isotropic bearings has been developed. Rotordynamics theory related to this research work is studied including synchronous unbalance response, critical speed, gyroscopic effect, critical speed map, and stability. The method of solution is based on the Transfer Matrix approach containing both real and complex variable notations for deriving the overall system matrices. Muller's Method is applied to search for real or complex eigenvalues of the system. The corresponding mode shapes are found by back substitution. An accurate and efficient computer program, BEAM VII, has been designed to perform the analysis. Through the discussion of a series of numerical examples published by other authors, the confirmation of the rotor dynamics theory and precision of the computer code are achieved. / Master of Science

The budgeting of water fluxes in the soil is an extremely complex problem, and is compounded by subsurface controls and environmental forces which modify the soil water dynamics. Of the controlling factors, the underlying geology and the soil media are vital components and are often misinterpreted. The geology and soil media components have been neglected mostly because of the difficulty in monitoring the dominant processes that are linked to the water balance in the subsurface. Until recently, hydrometry has been the dominant method of measuring and monitoring the subsurface water balance. Hydrometric measurements have included water content measurement by Time Domain Reflectometry (TDR), soil water potential measurements through tensiometry and groundwater water level monitoring. Hydrometry is still the preferred method of monitoring soil water dynamics, but measurements are generally localised and lateral accumulations and fluxes of water are difficult to interpret. Using geophysical methods and instrumentation to define soil water dynamics could have numerous advantages over conventional hydrometric methods. Among the geophysical techniques dedicated to image the near surface, Electrical Resistivity Tomography (ERT) surveying has been increasingly used for environmental, engineering and geological purposes during the last decade. The aim of this study is to determine if ERT observations could yield the accuracy required to define vertical and lateral soil water dynamics. The ERT instrumentation uses an electrical current that is inserted into the subsurface through various electrode arrangements and a resulting resistance is determined at the take-out electrodes. With the aid of a modelling package these resistance values are reproduced into a pseudosection of underlying resistivity distribution which is influenced by the moisture conditions of the subsurface medium. This geophysical method is primarily used for geological studies but by doing repeated surveys with the same electrode positioning, moisture fluctuation monitoring could be realised. Use of the ERT technique is at the forefront of soil water dynamics monitoring. The main objective of this study is to propose that the ERT instrumentation could be a more efficient and more informative method of studying soil water dynamics than the traditional soil water dynamics monitoring equipment, particularly to define lateral fluxes and accumulation of subsurface water. The study site is a well instrumented transect in the Nkuhlu Exclosures in the Kruger National Park, South Africa, where ongoing soil water dynamics are monitored. The project aims to compare the ERT data to fiR data on a daily basis, over a period of three weeks, during the rain season, monitoring event based wetting and the subsequent drying phases of the soils in a 2-dimensional section. The project and its fmdings are shown to be valuable to the hydrological interpretation of the subsurface water balance. The application is shown to be particularly important to ecohydrology, in the monitoring of soil water dynamics in a 2-dimensional transect and understanding how the natural cycles of water distribution and plant uptake are linked together. The study demonstrates that ERT can be used to observe changes in the water storage and lateral fluxes within a transect which supports varying vegetation and ecologies. The linking of water fluxes in the hydrology cycle to uptakes and controls in the ecosystem has been developed into the research focus known as ecohydrology The use of the ERT instrument can only benefit this research focus in the future. The study demonstrates that ERT instrumentation can be used to provide valuable understanding of subsurface water dynamics and in turn the effects on ecohydrology. / Thesis (M.Sc.)-University of KwaZulu-Natal, Pietermaritzburg, 2006.

No description available.

Although oscillating water column type wave energy devices are nearing the stage of commercial exploitation, there is still much to be learnt about many facets of their hydrodynamic performance. This research uses the commercially available FLUENT computational fluid dynamics flow solver to model a complete OWC system in a two dimensional numerical wave tank. A key feature of the numerical modelling is the focus on the influence of the front wall geometry and in particular the effect of the front wall aperture shape on the hydrodynamic conversion efficiency. In order to validate the numerical modelling, a 1:12.5 scale experimental model has been tested in a wave tank under regular wave conditions. The effects of the front lip shape on the hydrodynamic efficiency are investigated both numerically and experimentally and the results compared. The results obtained show that with careful consideration of key modelling parameters as well as ensuring sufficient data resolution, there is good agreement between the two methods. The results of the testing have also illustrated that simple changes to the front wall aperture shape can provide marked improvements in the efficiency of energy capture for OWC type devices.

Hemodynamic factors play a role in atherogenesis and the localization of atherosclerotic plaques. The human aorta and coronary arteries are susceptible to arterial disease, and there have been many studies of flows in models of these vessels. However, previous work has been limited in that investigations have not modeled both the geometry and flow conditions in specific individuals. The first aim of the research was to develop a methodology that combined computational fluid dynamics (CFD) and magnetic resonance imaging (MRI) to simulate the blood flow patterns found in the human aorta. The methodology included MR image processing, 3D model reconstruction and flow simulation using in vivo velocity boundary conditions obtained from phase contrast (PC)-MRI scanning. The CFD simulations successfully reproduce the unusual right-hand helical flow pattern that has been reported in the ascending aorta, giving confidence in the accuracy of the methodology. The second aim was to investigate the causes of the right-hand helical flow. It was found that the correct flow dynamics could only be produced by including the specific aortic motion caused by the beating heart; and it is concluded that this is a significant factor in producing the observed in vivo helical flow patterns. The entrance flows of coronary arteries are expected to be affected by flow in the aortic root, and the third aim was to explore these effects using models that include aorta and coronary arteries. The simulation results demonstrate that a pair of axial vortexes with different rotating directions exists in the entrance segments of the right and left coronary arteries during systole and early diastole, producing asymmetrical wall shear stress (WSS) distributions. The last aim of the research was to examine possible relationships between WSS distributions induced by the entry flow patterns and the frequency distributions of atherosclerosis in the proximal segments of coronary arteries reported in the clinical literature. A close correspondence between low WSS and higher frequency of plaque occurrence was observed. The tools developed in this study provide a promising avenue for future study of cardiovascular disease because of the ability to investigate phenomena in individual human subjects.

No description available.

A finite-volume procedure, comprising a gradient-reconstruction technique and a multidimensional limiter, has been proposed for upwind algorithms on unstructured grids. The high-resolution strategy, with its inherent dependence on a wide computational stencil, does not suffer from a catastrophic loss of accuracy on a grid with poor connectivity as reported recently is the case with many unstructured-grid limiting procedures. The continuously-differentiable limiter is shown to be effective for strong discontinuities, even on a grid which is composed of highly-distorted triangles, without adversely affecting convergence to steady state. Numerical experiments involving transient computations of two-dimensional scalar convection to steady-state solutions of Euler and Navier-Stokes equations demonstrate the capabilities of the new procedure.

[Truncated abstract] Ecologists are increasingly interested in quantifying local interacting processes and their impacts on spatial vegetation patterns. In arid and semiarid ecosystems, theoretical models (often spatially explicit) of dynamical system behaviour have been used to provide insight into changes in vegetation patterning and productivity triggered by ecological events, such as fire and episodic rainfall. The incorporation of aerial imagery of vegetation patterning into current theoretical model remains a challenge, as few theoretical models may be inferred directly from ecological data, let alone imagery. However, if conclusions drawn from theoretical models were well supported by image data then these models could serve as a basis for improved prediction of complex ecosystem behaviour. The objective of this thesis is therefore to innovate methods for inferring theoretical models of vegetation dynamics from imagery. ... These results demonstrate how an ad hoc inference procedure returns biologically meaningful parameter estimates for a germ-grain model of T. triandra vegetation patterning, with VLSA photography as data. Various aspects of the modelling and inference procedures are discussed in the concluding chapter, including possible future extensions and alternative applications for germ-grain models. I conclude that the state-and-transition model provides an effective exploration of an ecosystem?s dynamics, and complements spatially explicit models designed to test specific ecological mechanisms. Significantly, both types of models may now be inferred from image data through the methodologies I have developed, and can provide an empirical basis to theoretical models of complex vegetation dynamics used in understanding and managing arid (and other) ecological systems.

This thesis presents the author's contribution <p>to the design and implementation of COOLFluiD,<p>an object oriented software platform for <p>the high performance simulation of multi-physics phenomena on unstructured grids. In this context, the final goal has been to provide a reliable tool for handling high speed aerothermodynamic <p>applications. To this end, we introduce a number of design techniques that have been developed in order to provide the framework with flexibility<p>and reusability, allowing developers to easily integrate new functionalities such as arbitrary mesh-based data structures, numerical algorithms (space discretizations, time stepping schemes, linear system solvers, ),and physical models. <p>Furthermore, we describe the parallel algorithms <p>that we have implemented in order to efficiently <p>read/write generic computational meshes involving <p>millions of degrees of freedom and partition them <p>in a scalable way: benchmarks on HPC clusters with <p>up to 512 processors show their effective suitability for large scale computing. <p>Several systems of partial differential equations, <p>characterizing flows in conditions of thermal and <p>chemical equilibrium (with fixed and variable elemental fractions)and, particularly, nonequilibrium (multi-temperature models) <p>have been integrated in the framework. <p>In order to simulate such flows, we have developed <p>two state-of-the-art flow solvers: <p>1- a parallel implicit 2D/3D steady and unsteady cell-centered Finite Volume (FV) solver for arbitrary systems of PDE's on hybrid unstructured meshes; <p>2- a parallel implicit 2D/3D steady vertex-centered Residual Distribution (RD) solver for arbitrary systems of PDE's on meshes with simplex elements (triangles and tetrahedra). <p>The FV~code has been extended to handle all <p>the available physical models, in regimes ranging from incompressible to hypersonic. <p>As far as the RD code is concerned, the strictly conservative variant of the RD method, denominated CRD, has been applied for the first time in literature to solve high speed viscous flows in thermochemical nonequilibrium, yielding some preliminary outstanding results on a challenging double cone flow simulation. <p>All the developments have been validated on real-life testcases of current interest in the aerospace community. A quantitative comparison with experimental measurements and/or literature has been performed whenever possible. / Doctorat en Sciences de l'ingénieur / info:eu-repo/semantics/nonPublished