Radars, as the name suggests, were traditionally used for Radio Detection and Ranging. Nevertheless, advances in high resolution electromagnetic simulations, Ultra Wide-Band sources, signal processing and computer technologies have resulted in a possible perception of radars as sensors for target discrimination. In this thesis, the feasibility of discrimination between targets even with minor variations in structure and material composition on the basis of radar echoes is effectively demonstrated. It is well-known that the echoes from any target are affected by its natural frequencies which are dependent only on the shape and material composition of the target, and independent of the aspect angle or the incident waveform. The E-pulse technique is based on the fact that incident waveforms can be designed that uniquely annihilate the echoes from chosen regions of a target, and forms the basis of the method of discrimination proposed in this thesis. Earlier methods reported in the literature, effectively discriminated only between different classes of targets with substantial variations in the overall dimensions of the body. Discrimination of targets of the same class with a minor structural modification or with a material coating on specific areas was rather difficult. This thesis attempts and successfully validates a method which comprehensively addresses this problem. The key idea of this method is to use the higher frequency resonances (which characterise the finer details of a target) in the E-pulse technique. An obviously important aspect of target discrimination is therefore that of precisely estimating the natural frequencies for each target and understanding the changes in these frequencies, and their associations with the changes in structure and material composition. Current approaches to determine these frequencies are either based In the time or frequency domains. While the latter approach comprises the computation of the roots of a related determinantal equation, in the time domain, the natural frequencies are extracted from the response of a target to an impulse. Such a response can either be generated from actual experiments or by simulating the scattering response using Computational Electromagnetic (CEM) techniques. In this work, the impulse response is obtained from the frequency response of the scatterers in the frequency range of interest. Since no single CEM technique can effectively cover the entire range of frequencies needed for the E-Pulse synthesis. The Method of Moments and Physical Optics have been used for low and high frequency scattering respectively. The results obtained using the latter technique are validated by comparing with those obtained using Method of Moments at the transition frequencies and Geometrical Theory of Diffraction (GTD). The natural frequencies (i.e., poles of a corresponding transfer function) are extracted from the impulse response using Prony's algorithm. One of the parameters in this method is the number of such poles (i.e.. the order of the transfer function) present in the response, and the accuracy of the computed pole values depends on this assumed order. Here, the Hankel singular values of a transfer function is used to estimate the number of poles. This in turn implies that a specific norm of the error between a transfer function corresponding to the frequency response generated earlier, and a transfer function with an assumed order obtained using Prony's method is minimised. In the thesis, a wide range of target shapes are considered for purposes of illustration: wires, cylinders, spheres, plates and complex bodies such as aircraft, and the discrimination capability is demonstrated by introducing minor perturbations in their shape and/or material composition. .The following cases are considered here: (a) Wires: Conducting wires with a protrusion in one segment; conducting wire from another coated with a dielectric in a segment, (b) Cylinders: Conducting cylinders with one perturbed; conducting cylinders with a portion scrapped off in the middle, (c) Plates: Conducting plates with a elongation on one comer; conducting plate with another one with a hole in the centre, (d) Spheres: Conducting spheres with different radii; conducting spheres with Radar Absorbing Material coated spheres with different coating thickness; conducting spheres with chiral coated spheres with varying coating thickness, (e) Aircraft: Canonical model of MiG-29 aircraft from a similar one with stores placed under the wing.

L'un des enjeux majeurs pour les systèmes d'imagerie par diffraction acoustique et micro-onde, est l'amélioration des performances obtenues au moment de la reconstruction des objets étudiés. Cette amélioration peut s'effectuer par la recherche d'algorithmes d'imagerie plus performants d'une part et par la recherche d'une meilleure configuration de mesures d'autre part. La première approche (recherche d'algorithmes) permet d'améliorer le processus d'extraction de l'information présente dans un échantillon de mesures donné. Néanmoins, la qualité des résultats d'imagerie reste limitée par la quantité d'information initialement disponible. La seconde approche consiste à choisir la configuration de mesures de manière à augmenter la quantité d'information disponible dans les données. Pour cette approche, il est nécessaire de quantifier la quantité d'information dans les données. En théorie de l'estimation, ceci équivaut à quantifier la performance du système. Dans cette thèse, nous utilisons la Borne de Cramer Rao comme mesure de performance, car elle permet d'analyser la performance des systèmes de mesures sans être influencé par le choix de la méthode d'inversion utilisée. Deux analyses sont proposées dans ce manuscrit. La première consiste en l'évaluation de l'influence des facteurs expérimentaux sur la performance d'inversion. Cette analyse a été effectuée pour différents objets le tout sous une hypothèse de configuration bidimensionnelle. La seconde analyse consiste à comparer les performances de l'estimateur obtenu avec l'approximation de Born aux valeurs de la borne de Cramer Rao (BCR); l'objectif étant d'illustrer d'autres applications possibles de la BCR. / Improving the performance of diffraction based imaging systems constitutes a major issue in both acoustic and electromagnetic scattering. To solve this problem, two main approaches can be explored. The first one consists in improving the inversion algorithms used in diffraction based imaging. However, while this approach generally leads to a significant improvement of the performance of the imaging system, it remains limited by the initial amount of information available within the measurements. The second one consists in improving the measurement system in order to maximize the amount of information within the experimental data. This approach does require a quantitative mean of measuring the amount of information available. In estimation problems, the {appraisal of the} performance of the system is often used for that purpose. In this Ph.D. thesis, we use the Cramer Rao bound to assess the performance of the imaging system. In fact, this quantity has the advantage of providing an assessment which is independent from the inversion algorithm used. Two main analysis are discussed in this thesis. The first analysis explores the influence on the system's performance, of several experimental conditions such as the antennas positions, the radiation pattern of the source, the properties of the background medium, etc. Two classes of objects are considered: 2D homogeneous circular cylindrical objects and 2D cylindrical objects with defect. The second analysis studies the performance of an estimator based on Born approximation with the Cramer Rao Bound as reference. The aim of this second analysis is to showcase other possible applications for the Cramer Rao Bound.

Le travail réalisé dans cette thèse s'intègre globalement dans le cadre de I'observation et la surveillance maritime.Afin d'améliorer la reconnaissance et I'identification automatique de cibles noyées dans un environnement perturbé, nous avons opté à la fusion de différentes connaissances et informations concernant une scène observée à distance par des capteurs micro-ondes. En effet, plusieurs phénomènes physiques co-existent et perturbent la propagation des ondes électromagnétiques au-dessus d'une surface et notamment au-dessus d'une surface maritime hétérogène (la réfraction due aux gradients d'indice, la rugosité de la surface de mer, les effets hydrodynamiques non linéaires du type vagues déferlantes, la présence d'objets, les polluants, sillage de navires, zones côtières, ...). Dans ce contexte, le travail présenté dans cette thèse porte sur l'étude de la signature électromagnétique (coefficients de diffusion) d'une surface maritime hétérogène avec la prise en compte des phénomènes hydrodynamiques (linéaires : vagues de capillarité et de gravité, non linéaires : vagues déferlantes). Cette estimation de la signature électromagnétique est effectuée en configuration bistatique (monostatique et propagation avant) et en bande X. L'étude complète de cette problématique est difficile. En effet, le déferlement est un processus dissipatif de l'énergie qui correspond à la dernière étape de la vie d'une vague et qui a donc le plus souvent lieu à I'approche du rivage. Ce phénomène non linéaire produit un pic de mer qui est une augmentation rapide des coefficients de diffusion et qui peut dépasser 10 dB dans une période de 100 ms. Ce pic peut conduire à des échos parasites, qui peuvent être identifiés comme des cibles virtuelles, et par la suite elles peuvent perturber le système de détection radar (fausses alarmes). Par conséquent, pour améliorer le processus de détection et pour réduire le taux de fausses alarmes, il est important de distinguer entre les cibles et les pics de mer générés par des vagues déferlantes. Ceci constitue I’une des motivations et aussi I'intérêt d'étudier la signature électromagnétique des vagues déferlantes dans différentes configurations d'observation de sorte que nous puissions facilement indiquer la présence voir I'identification des pics de mer. Pour contribuer à cette problématique, nous avons proposé une méthodologie basée sur un modèle électromagnétique hybride basé sur une combinaison d'une part de méthodes asymptotiques(SPMI utilisée dans le cadre de ce travail) pour simuler la réponse radar des vagues linéaire (vagues de capillarité et de gravité décrites via le spectre de mer d'Elfouhaily), et d'autre part de méthodes exactes (MoM, FB < Forward-Backward ) retenue dans le travail présenté dans ce manuscrit) pour calculer la réponse électromagnétique des vagues non-linéaires (profils considérés sont issus des résultats du code LONGTANK). Afìn de compléter l'étude théorique et les simulations réalisées, nous avons effectué une phase d'évaluation et de validation par des mesures de signature radar réalisées dans la chambre anéchoïque de I'Ensta Bretagne. / The work done in this thesis fits generally under the observation and maritime surveillance. To improve the detection and automatic identification of targets embedded in a noisy environment targets, we opted for the fusion of different knowledge and information regarding a remotely observed scene by microwave sensors. Indeed, several physical phenomena co-exist and interfere with the propagation of electromagnetic waves over a heterogeneous sea surface (the refraction due to the index gradients, the roughness of the sea surface, nonlinear hydrodynamic effects like waves breaking, the presence of objects, pollutants, ship wake, coastal areas,..). In this context, the work presented in this thesis focuses on the study of electromagnetic signature (diffusion coefficients) of a heterogeneous sea surface with consideration of hydrodynamic phenomena (linear: capillary and gravity waves, nonlinear: breaking waves). The electromagnetic signature is performed in bistatic configuration (monostatic and forward propagating) and in X-band. The complete study of this problem is difficult.Indeed, the breaking wave is a dissipative process of energy that corresponds to the last stage of the life of a wave and therefore has most often held in the shore. This nonlinear phenomenon produces a sea peak which is a rapid increase of the diffusion coefficients and can exceed l0 dB in a 100 ms period. This peak can lead to clutter, which can be identified as virtual targets, and then they can disrupt the detection radar system (false alarms). Therefore, to improve the detection process and reduce the false alarm rate, it is important to distinguish between targets and sea peaks generated by breaking waves. This represents one of the motivations and also the interest to study the electromagnetic signature of breaking waves in different observation configurations so that we can easily detect and identify the sea peaks. To solve this problem, we proposed a methodology based on a hybrid electromagnetic model which is on a combination of asymptotic methods (SPMI used in this work) to simulate the radar response of linear waves (capillary and gravity waves described via the Elfouhaily sea spectrum) and an exact methods, the method of moment (the FB "Forward-Backward" method is used in this work), to calculate the electromagnetic response of nonlinear waves (profiles are produced by the LONGTANK code). To complement the theoretical study and simulations, we carried out an evaluation and validation phase by measuring the radar signature of breaking wave profiles in the ENSTA Bretagne anechoic chamber.