Thesis (Ph. D.)--Oregon State University, 2007. / Printout. Includes bibliographical references (leaves 82-85). Also available on the World Wide Web.

Motivated by the necessity to consider probabilistic approaches to future designs, the main objective of this thesis was to develop and characterize energy efficient probabilistic CMOS (PCMOS) circuits that can be used to implement low energy computing platforms. The simplest circuit characterized was a PCMOS inverter (switch). An analytical model relating the energy consumption per switching (E) of this switch to its probability of correctness, p was derived. This characterization can also be used to evaluate the energy and performance savings that are achieved by PCMOS switch based computing platforms. The characterization of a PCMOS inverter was also extended to larger circuits whose probabilistic behavior was analyzed by first developing probability models of primitive gates, which were then input to a graph-based model to find the probabilities of larger circuits. The analysis of larger probabilistic circuits provides a basis for analyzing probabilistic behaviors due to noise in future technologies, and can be used in probabilistic design and synthesis methods to improve circuit reliability. Another important design criterion is the speed of a PCMOS circuit. The trade-offs between the energy, speed, and p of PCMOS circuits were also analyzed. Based on this study, various methods were proposed to optimize energy delay product (EDP) and p under given constraints on p, performance, and EDP. The sensitivity of the analysis with respect to variations in temperature, supply voltage, and threshold voltage was also considered.

Thesis (M.S.)--University of Missouri--Rolla, 2007. / Vita. The entire thesis text is included in file. Title from title screen of thesis/dissertation PDF file (viewed March 18, 2008) Includes bibliographical references (p. 89-90).

Thesis (M. S. in Electrical Engineering)--Vanderbilt University, May 2009. / Title from title screen. Includes bibliographical references.

This thesis investigates a test method to detect the presence of Variable Retention Time (VRT) bits in manufactured DRAM. The VRT bits retention time is modeled as a 2-state random telegraph process that includes miscorrelation between test and use. The VRT defect is particularly sensitive to test and use conditions. A new test method is proposed to screen the VRT bits by simulating the use conditions during manufacturing test. Evaluation of the proposed test method required a bit-level VRT model to be parameterized as a function of temperature and voltage conditions. The complete 2-state VRT bit model combines models for the time-in-state and for the retention-time including miscorrelation. A copula is used to model the eect of miscorrelation between test and use. The proposed VRT test algorithm runtime is estimated as a function of VRT test coverage, test temperature and test voltage.

Le développement d'un produit portable et performant, tout en limitant les coûts, répond à la croissance du marché de la détection biologique par la méthode de la biochimiluminescence. Cet outil de diagnostic d'hygiène et de qualité en temps réel in situ permet une meilleure sécurité, gestion des risques, traçabilité et surveillance des risques. Cet outil trouvera son application dans les domaines agroalimentaires, médicaux, pharmaceutiques, cosmétologiques, environnementaux (eau, air, surfaces), le tertiaire ou les collectivités. Les intérêts sont industriels, écologiques et économiques, et reflètent le désir de proposer un produit novateur et compétitif sur un marché en plein essor. En effet, la détection de certains contaminants est devenue une priorité dans la gestion des risques microbiologiques. La plupart des méthodes de diagnostic actuelles sont lentes, coûteuses, complexes, et limitées dans leur mise en uvre et leurs résultats. Le diagnostic étant essentiel dans tous les secteurs d'activité, il est impératif d'apporter des solutions alternati ves de détection et de quantification des germes pathogènes ou autre toxiques, par la conception de nouveaux outils d'analyse sur le terrain, en temps réel, avec une rapidité et une sensibilité élevées. Ceci passe par une étude fine des phénomènes de biochimiluminescence (BCL) et par la recherche des différents composants optoélectronique capables de détecter les faibles puissances lumineuses émises. Le projet de conception d'un luminomètre de terrain à base de photodiodes PIN ou avalanche, ou de photomultiplicateurs répond aux besoins de la détection et de la mesure de la puissance lumineuse rayonnée par des réactions spécifique ou non de biochimiluminescence. L'élaboration d'un appareil de mesure portable destiné à la quantification in situ de biomasse ou molécules à l'état de traces est nécessaire à l'exploitation des réactifs. En effet, les appareils existants fournissent une information en RLU (Relative Light Unit, unité arbitraire qui né cessite une comparaison à un étalon connu) et ne donnent pas une information quantifiée directe sur la concentration de l'élément recherché dans l'échantillon testé. Ils ne permettent donc pas d'optimiser la biochimiluminescence sur le terrain. L'objectif de ce travail est de mettre au point une alternative plus performante que les systèmes de détection actuels et qui soit moins onéreuse. / The development of a portable and efficient device, while reducing costs, meets the growing market for biological detection by the method of biochimiluminescence. This diagnostic tool of hygiene and quality in real time in situ allows for better security, risk management, traceability and risk monitoring.This tool will find application in the areas food, medical, pharmaceutical, cosmetic, environmental (water, air and surfaces), the tertiary or communities. Interests are industrial, environmental and economic, and reflect the desire to offer an innovative and competitive device in a booming market.Indeed, the detection of contaminants has become a priority in the management of microbiological hazards. Most current diagnostic methods are slow, costly, complex and limited in their implementation and their results.The diagnosis is essential in all industries, it is imperative to provide alternative solutions for the detection and quantification of pathogens or other toxic by the conception of new analytical tools in situ in real time with speed and high sensitivity. This requires a detailed study of biochimiluminescence (BCL) phenomena and the search for various optoelectronic components capable of detecting low power emitted light.The projet for the conception of a field-luminometer based on avalanche photodiodes, or PIN, or photomultiplier responds to the needs of detecting and measuring the light power radiated by reactions biochimiluminescence specific or not. The development of a portable measuring device for in situ quantification of biomass or molecules trace is necessary for the operation of the reactants.Indeed, existing devices provide information in RLU (Relative Light Units, arbitrary units implying a comparison to a known standard) and do not give a direct quantified information on the concentration of the desired item in the test sample. So, they do not optimize biochimiluminescence field. The objective of this work is to develop an alternative more efficient than current detection systems and is less expensive.

M.Ing. (Electrical and Electronic Engineering) / With all the talk about the Information Highway and its construction, there is also a channel which is highly underestimated and thus almost ignored. On normal FM radio transmissions extra bandwidth exists, suitable for the transmission of audio and data. In this thesis the effects of interference on data transmission over the Supplementary Signal Transmission (SST) channel are analysed. The channel is characterized in terms of the Bit Error Rate (BER) versus field strength and distance from a transmitter ...

Timing jitter and phase noise are important design considerations in most electronic systems, particularly communication systems. The desire for faster transmission speeds and higher levels of integration, combined with lower signal levels and denser circuit boards has placed greater emphasis on managing problems related to phase noise, timing jitter, and timing distribution. This thesis reports original work on phase noise modelling in electronic systems. A new model is proposed which predicts the up-conversion of baseband noise to the carrier frequency in RF amplifiers. The new model is validated by comparing the predicted phase noise performance to experimental measurements as it applies to a common emitter (CE), bipolar junction transistor (BJT) amplifier. The results show that the proposed model correctly predicts the measured phase noise, including the shaping of the noise about the carrier frequency, and the dependence of phase noise on the amplifier parameters. In addition, new work relating to timing transfer in digital communication systems is presented. A new clock recovery algorithm is proposed for decoding timing information encoded using the synchronous residual time-stamp (SRTS) method. Again, theoretical analysis is verified by comparison with an experimental implementation. The results show that the new algorithm correctly recovers the source clock at the destination, and satisfies the jitter specification set out by the ITU-T for G.702 signals.

Thesis (M.Eng.(Microelectronic Engineering))--University of Pretoria, 2009. / Includes summaries in Afrikaans and English. Includes bibliographical references (leaves [74]-78). Mode of access: World Wide Web.

No description available.