This master´s thesis deals with the evaluation of the financial situation of the company using selected methods of financial analysis. It is focussed on detection of shortcomings in financial management and their causes. In conclusion of the thesis are suggested possible solutions for the improvement of the current financial situations of the company.

This thesis deals with the financial situation of the company INTERHOTEL VORONĚŽ Inc. within the years 2001 and 2005 on the basis of selected methods of the financial analysis. It determines problems and proposes possible solutions which result in the improvement of the financial situation of the firm in the following years.

With flow forming – an incremental forming process – the final geometry of a component is achieved by a multitude of minor sequential forming steps. Due to this incremental characteristic associated with the variable application of the tools and kinematic shape forming, it is mainly suitable for small and medium quantities. For the extensive use of the process it is necessary to have appropriate simulation tools. While the Finite-Element-Analysis (FEA) is an acknowledged simulation tool for the modeling and optimization of forming technology, the use of FEA for the incremental forming processes is associated with very long computation times. For this reason a simulation method called FloSim, based on the upper bound method, was developed for cylindrical flow forming processes at the Chair of Virtual Production Engineering, which allows the simulation of the process within a few minutes. This method was improved by the work presented with the possibility of geometry computation during the process.

Drückwalzen als inkrementelles Umformverfahren ist aufgrund seiner Verfahrenscharakteristik mit sehr hohen Rechenzeiten bei der Finite-Elemente-Methode (FEM) verbunden. Die Modelle ModIni und FloSim sind zwei analytisch-elementare Ansätze, um dieser Prämisse entgegenzuwirken. Das für ModIni entwickelte Geometriemodell wird in der vorliegenden Arbeit weiterentwickelt, so dass eine werkstoffunabhängige Berechnung der Staugeometrie ermöglicht wird und ein deutlich größeres Anwendungsspektrum der Methode bereitsteht. Die Simulationsmethode FloSim basiert auf dem oberen Schrankenverfahren und ermöglicht somit eine Berechnung von Zylinderdrückwalzprozessen innerhalb weniger Minuten. Für die Optimierung der Methode FloSim wurden in der vorliegenden Arbeit die analytischen Grundlagen für die Berechnung der Bauteillänge sowie der Umformzonentemperatur während des Prozesses erarbeitet. Weiterhin wurde auf Basis von numerisch realisierten Parameteranalysen ein Ansatz für die analytische Berechnung des Vergleichsumformgrades von Drückwalzprozessen entwickelt. Diese drei Ansätze, zu Bauteillänge, Temperatur und Umformgrad wurden in die Simulationssoftware FloSim integriert und führen zu einer deutlichen Genauigkeitssteigerung der Methode. / Flow Forming as incremental forming process is connected with extreme long computation times for Finite-Element-Analyses. ModIni and FloSim are two analytical/elementary models to antagonize this situation. The geometry model, which was developed for ModIni, is improved within the presented work. The improvement enables the material independent computation of the pile-up geometry and permits a wider application scope of ModIni. The simulation method FloSim is based on the upper bound method, which enables the computation of cylindrical Flow Forming processes within minutes. For the optimization of the method FloSim, the basics for the analytical computation of the workpiece length during the process and the computation of the forming zone temperature were developed within this work. Fur-thermore, an analytical approach for the computation of the equivalent plastic strain of cylindrical Flow Forming processes was developed based on numerical parameter analyses. This tree approaches for computing the workpiece length, the temperature and the equivalent plastic strain were integrated in FloSim and lead to an increased accuracy.

This master´s thesis analyses financial situation of FEI Company during years 2003 – 2006 by means of selected methods of financial and economic analysis. It also includes proposals and recommendations for improvement of the present situation with regard to sphere of business and its possibilities.

This diploma thesis is focused on financial analysis of the company. The main attention is paid to elementary methods, mainly to analysis of balance, list of profits and loss, financial ratios and their systems. These methods are used for financial analysis of the pharmacy At the company. On the basis of findings, this diploma thesis includes proposals for improvement and evalutation of the contributions of these proposals for the company.

This diploma thesis is focused on financial analysis of the pharmacy. The main attention is paid to elementary methods, mainly to analysis of balance, list of profits and loss, financial ratios and their systems. These methods are used for financial analysis of the pharmacy At the Lion. On the basis of findings, this diploma thesis includes proposals for improvement and evalutation of the contributions of these proposals for the company.

This thesis, entitled “The Evaluation of the Financial Situation’s Company “, deals with theory and practice of financial management. The theoretical part contains definition of financial analysis and defined various method of financial analysis. The practical part contains application of financial analysis methods in IFE-CR a.s. The main contribution of my work is a description of financial situation in company during last 7 years and suggestion of recommendation.

The subject of this thesis is application of methods and procedures of financial analysis focused on financial health. The first part focuses on financial analysis, data preparation and definition of applied financial indicators in theoretical level. The second part sets out the chosen company and its present position. These theoretical pieces of knowledge are applied to the real situation by valuation of the concrete company in the last part of this thesis. The overall rating and recommendations follows.

Diploma thesis is focused on the examination of financial standing of the PIKE ELECTRONIC, spol. s r.o. company with the usage of elementary methods of financial analysis. In addition to classic annual financial analysis was executed also monthly financial analysis. On the base of the details arisen from the performed financial analysis the factors of the company financial standing were discovered and appropriate improving arrangements were specified. The thesis also contains clarification of basic approaches to financial analysis and evaluation of financial analysis which have been performed in the company till this time, detection of their deficiencies and the recomendation how to perform finacial analysis in future period including the way of using it in business and financial management.