The work selects a specific issue from the numerical analysis of optimal control problems. We investigate a linear-quadratic optimal control problem based on a partial differential equation on 3-dimensional non-convex domains. Based on efficient solution methods for the partial differential equation an algorithm known from control theory is applied. Now the main objectives are to prove that there is no degradation in efficiency and to verify the result by numerical experiments. We describe a solution method which has second order convergence, although the intermediate control approximations are piecewise constant functions. This superconvergence property is gained from a special projection operator which generates a piecewise constant approximation that has a supercloseness property, from a sufficiently graded mesh which compensates the singularities introduced by the non-convex domain, and from a discretization condition which eliminates some pathological cases. Both isotropic and anisotropic discretizations are investigated and similar superconvergence properties are proven. A model problem is presented and important results from the regularity theory of solutions to partial differential equation in non-convex domains have been collected in the first chapters. Then a collection of statements from the finite element analysis and corresponding numerical solution strategies is given. Here we show newly developed tools regarding error estimates and projections into finite element spaces. These tools are necessary to achieve the main results. Known fundamental statements from control theory are applied to the given model problems and certain conditions on the discretization are defined. Then we describe the implementation used to solve the model problems and present all computed results.

Die Dissertation beschäftigt sich mit Parameteridentifikationsproblemen, wie sie häufig in Fragestellungen der Festkörpermechanik zu finden sind. Hierbei betrachten wir die Identifikation von Materialparametern -- die typischerweise die Eigenschaften der zugrundeliegenden Materialien repräsentieren -- aus gemessenen Verformungen oder Belastungen eines Testkörpers. In mathematischem Sinne entspricht dies der Lösung von Identifikationsproblemen, die eine spezielle Klasse von inversen Problemen bilden. Der Inhalt der Dissertation ist folgendermaßen gegliedert. Nach dem einführenden Abschnitt 1 wird in Abschnitt 2 ein Überblick von Optimierungs- und Regularisierungsverfahren zur stabilen Lösung nichtlinearer inverser Probleme diskutiert. In Abschnitt 3 betrachten wir die Identifikation von skalaren und stückweise konstanten Parametern in linearen elliptischen Differentialgleichungen. Hierbei werden zwei Testprobleme erörtert, die Identifikation von Diffusions- und Reaktionsparameter in einer allgemeinen elliptischen Differentialgleichung und die Identifikation der Lame-Konstanten in einem Modell der linearisierten Elastizität. Die zugrunde liegenden PDE-Modelle und Lösungszugänge werden erläutert. Insbesondere betrachten wir hier Newton-artige Algorithmen, Gradientenmethoden, Multi-Parameter Regularisierung and den evolutionären Algorithmus CMAES. Abschließend werden Ergebnisse einer numerischen Studie präsentiert. Im Abschnitt 4 konzentrieren wir uns auf die Identifikation von verteilten Parametern in hyperelastischen Materialmodellen. Das nichtlineare Elastizitätsproblem wird detailiert erläutert und verschiedene Materialmodelle werden diskutiert (linear elastisches St.-Venant-Kirchhoff Material und nichtlineare Neo-Hooke, Mooney-Rivlin und Modified-Fung Materialien. Zur Lösung des resultierenden Parameteridentifikationsproblems werden Lösungsansätze aus der optimalen Steuerung in Form eines Newton-Lagrange SQP Algorithmus verwendet. Die Resultate einer numerischen Studie werden präsentiert, basierend auf einem zweidimensionales Testproblem mit einer sogenannten Cook-Mebran. Abschließend wird im Abschnitt 5 die Verwendung adaptiver FEM für die Lösung von Parameteridentifikationsproblems kurz erörtert. / The dissertation is focussed on parameter identification problems arising in the context of structural mechanics. At this, we consider the identification of material parameters - which typically represent the properties of an underlying material - from given measured displacements and forces of a loaded test body. In mathematical terms such problems denote identification problems as a special case of general inverse problems. The dissertation is organized as follows. After the introductive section 1, section 2 is devoted to a survey of optimization and regularization methods for the stable solution of nonlinear inverse problems. In section 3 we consider the identification of scalar and piecewise constant parameters in linear elliptic differential equations and examine two test problems, namely the identification of diffusion and reaction parameters in a generalized linear elliptic differential equation of second order and the identification of the Lame constants in the linearized elasticity model. The underlying PDE models are introduced and solution approaches are discussed in detail. At this, we consider Newton-type algorithms, gradient methods, multi-parameter regularization, and the evolutionary algorithm CMAES. Consequently, numerical studies for a two-dimensional test problem are presented. In section 4 we point out the identification of distributed material parameters in hyperelastic deformation models. The nonlinear elasticity boundary value problem for large deformations is introduced. We discuss several material laws for linear elastic (St.-Venant-Kirchhoff) materials and nonlinear Neo-Hooke, Mooney-Rivlin, and Modified-Fung materials. For the solution of the corresponding parameter identification problem, we focus on an optimal control solution approach and introduce a regularized Newton-Lagrange SQP method. The Newton-Lagrange algorithm is demonstrated within a numerical study. Therefore, a simplified two-dimensional Cook membrane test problem is solved. Additionally, in section 5 the application of adaptive methods for the solution of parameter identification problems is discussed briefly.

The work selects a specific issue from the numerical analysis of optimal control problems. We investigate a linear-quadratic optimal control problem based on a partial differential equation on 3-dimensional non-convex domains. Based on efficient solution methods for the partial differential equation an algorithm known from control theory is applied. Now the main objectives are to prove that there is no degradation in efficiency and to verify the result by numerical experiments. We describe a solution method which has second order convergence, although the intermediate control approximations are piecewise constant functions. This superconvergence property is gained from a special projection operator which generates a piecewise constant approximation that has a supercloseness property, from a sufficiently graded mesh which compensates the singularities introduced by the non-convex domain, and from a discretization condition which eliminates some pathological cases. Both isotropic and anisotropic discretizations are investigated and similar superconvergence properties are proven. A model problem is presented and important results from the regularity theory of solutions to partial differential equation in non-convex domains have been collected in the first chapters. Then a collection of statements from the finite element analysis and corresponding numerical solution strategies is given. Here we show newly developed tools regarding error estimates and projections into finite element spaces. These tools are necessary to achieve the main results. Known fundamental statements from control theory are applied to the given model problems and certain conditions on the discretization are defined. Then we describe the implementation used to solve the model problems and present all computed results.

Die Dissertation beschäftigt sich mit Parameteridentifikationsproblemen, wie sie häufig in Fragestellungen der Festkörpermechanik zu finden sind. Hierbei betrachten wir die Identifikation von Materialparametern -- die typischerweise die Eigenschaften der zugrundeliegenden Materialien repräsentieren -- aus gemessenen Verformungen oder Belastungen eines Testkörpers. In mathematischem Sinne entspricht dies der Lösung von Identifikationsproblemen, die eine spezielle Klasse von inversen Problemen bilden. Der Inhalt der Dissertation ist folgendermaßen gegliedert. Nach dem einführenden Abschnitt 1 wird in Abschnitt 2 ein Überblick von Optimierungs- und Regularisierungsverfahren zur stabilen Lösung nichtlinearer inverser Probleme diskutiert. In Abschnitt 3 betrachten wir die Identifikation von skalaren und stückweise konstanten Parametern in linearen elliptischen Differentialgleichungen. Hierbei werden zwei Testprobleme erörtert, die Identifikation von Diffusions- und Reaktionsparameter in einer allgemeinen elliptischen Differentialgleichung und die Identifikation der Lame-Konstanten in einem Modell der linearisierten Elastizität. Die zugrunde liegenden PDE-Modelle und Lösungszugänge werden erläutert. Insbesondere betrachten wir hier Newton-artige Algorithmen, Gradientenmethoden, Multi-Parameter Regularisierung and den evolutionären Algorithmus CMAES. Abschließend werden Ergebnisse einer numerischen Studie präsentiert. Im Abschnitt 4 konzentrieren wir uns auf die Identifikation von verteilten Parametern in hyperelastischen Materialmodellen. Das nichtlineare Elastizitätsproblem wird detailiert erläutert und verschiedene Materialmodelle werden diskutiert (linear elastisches St.-Venant-Kirchhoff Material und nichtlineare Neo-Hooke, Mooney-Rivlin und Modified-Fung Materialien. Zur Lösung des resultierenden Parameteridentifikationsproblems werden Lösungsansätze aus der optimalen Steuerung in Form eines Newton-Lagrange SQP Algorithmus verwendet. Die Resultate einer numerischen Studie werden präsentiert, basierend auf einem zweidimensionales Testproblem mit einer sogenannten Cook-Mebran. Abschließend wird im Abschnitt 5 die Verwendung adaptiver FEM für die Lösung von Parameteridentifikationsproblems kurz erörtert. / The dissertation is focussed on parameter identification problems arising in the context of structural mechanics. At this, we consider the identification of material parameters - which typically represent the properties of an underlying material - from given measured displacements and forces of a loaded test body. In mathematical terms such problems denote identification problems as a special case of general inverse problems. The dissertation is organized as follows. After the introductive section 1, section 2 is devoted to a survey of optimization and regularization methods for the stable solution of nonlinear inverse problems. In section 3 we consider the identification of scalar and piecewise constant parameters in linear elliptic differential equations and examine two test problems, namely the identification of diffusion and reaction parameters in a generalized linear elliptic differential equation of second order and the identification of the Lame constants in the linearized elasticity model. The underlying PDE models are introduced and solution approaches are discussed in detail. At this, we consider Newton-type algorithms, gradient methods, multi-parameter regularization, and the evolutionary algorithm CMAES. Consequently, numerical studies for a two-dimensional test problem are presented. In section 4 we point out the identification of distributed material parameters in hyperelastic deformation models. The nonlinear elasticity boundary value problem for large deformations is introduced. We discuss several material laws for linear elastic (St.-Venant-Kirchhoff) materials and nonlinear Neo-Hooke, Mooney-Rivlin, and Modified-Fung materials. For the solution of the corresponding parameter identification problem, we focus on an optimal control solution approach and introduce a regularized Newton-Lagrange SQP method. The Newton-Lagrange algorithm is demonstrated within a numerical study. Therefore, a simplified two-dimensional Cook membrane test problem is solved. Additionally, in section 5 the application of adaptive methods for the solution of parameter identification problems is discussed briefly.