Le développement de systèmes de récupération d’énergie (ou energy harvesting systems en anglais) va de pair avec l’émergence de l’Internet des Objets et notamment la prolifération de réseaux de capteurs devant répondre aux besoins croissants en informations, que ce soit dans le domaine de l’industrie, de la sante, de la domotique ou de l’environnement qu’il soit urbain ou naturel. Les progrès réalisés ces dernières années dans le domaine des Technologies de l’Information et de la Communication ont permis de lever certains verrous technologiques au déploiement de ces réseaux de capteurs intelligents et autonomes, notamment grâce a l’amélioration des performances intrinsèques des composants microélectroniques (vitesse, consommation), la conception de circuits plus économes en énergie, ou bien la mise en place de standards de communications radio adaptes a ces contraintes énergies. Etant donné l’ubiquité des sources d’énergie, la fabrication de générateurs permettant d’alimenter directement ces capteurs à partir de ces sources représente une alternative viable à l’utilisation de batteries pour prolonger la durée de vie de ces capteurs communicants. Diverses technologies de générateurs ont ainsi été proposes pour s’adapter aux différentes formes que peut prendre l’énergie, qu’elle soit d’origine thermique, mécanique, solaire ou électromagnétique.Le présent travail est une contribution au développement de certains dispositifs de récupération thermiques basés sur l’exploitation des propriétés thermiques et mécaniques de bilames thermostatique. Ce type de générateurs, propose et développe au sein de STMicroelectronics à Crolles, se veut être une alternative fiable et bas cout a l’utilisation de matériaux thermoélectriques exploitant l’effet Seebeck pour générer de l’énergie électrique. Divers dispositifs ont déjà été fabriqués, démontrant la capacité des moteurs thermiques à base de bilames thermostatiques à alimenter des capteurs autonomes en fonctionnement synchrone et asynchrone. L’objectif de cette thèse est alors de démontrer la possibilité de miniaturiser de tels moteurs thermiques grâce aux techniques de fabrications utilisées en microélectronique. Afin de garantir le fonctionnement de ces systèmes a micro-échelle, un important travail de fond a d’abord été effectue sur la compréhension et la modélisation des phénomènes de couplages thermomécaniques a l’origine du comportement bistable des membranes bimétalliques. Ce travail a débouché sur la démonstration théorique du fonctionnement des moteurs thermiques a base de bilames et sur l’évaluation de leur performances énergétiques (énergie disponible, efficacité thermique, efficacité de Carnot relative). Dans la continuité de ce premier modèle, d’autres travaux ont été menés pour évaluer les performances de moteurs thermiques exploitant différents phénomènes de couplage électromécanique en vue de convertir l’énergie mécanique générée par les bilames thermostatiques en énergie électrique exploitable par les capteurs autonomes. La simulation du comportement des micro-générateurs à l’aide de ces divers modèles a debouché sur des lois d’échelles sur les performances des moteurs thermiques. Finalement, divers procédés de fabrications ont ete développé pour permettre la fabrication de microstructures thermiquement bistables. / The development of energy harvesting systems is linked to the emergence of the Internet of Things (IoT) and especially the proliferation of Wireless Sensors Networks that should respond to the growing needs for monitoring data in domains as diverse as the industry, the urban or natural environments, the home, or the human body etc. Recent progress in the field of information technologies have enabled to remove some of the technical obstables to the deployment of these smart and autonom devices, in particular thanks to the improvement of the performances of microelectronic components, the design of ultra-low-power circuits, or the creation of wireless communications standards adapted to the energy needs of wireless sensors. Given the great availability of energy sources, energy harvesters are reliable alternatives to batteries in order to extend the autonomy of these sensors. Various technologies of generators have been developped to adapt to the type of local energy sources (heat, vibration, light, radio-frequencies).The present work is a contribution to the development of thermal energy harvesters exploting the thermal and mechanical properties of bimetal thermostats. This type of technology developped at STMicroelectronics are intended to be a reliable and low-cost alternative to the use of thermoelectric materials exploing Seebeck effect to generate electricity from heat. Various devices were already fabricated at the macro-scale, demonstrating their ability to power wireless sensor nodes. In the continuity of these works, this PhD thesis aims to demonstrate the operation of these generators at the sub-millimetric scale. As a consequence, an important work on the modeling of the thermo-mechanical instability of bimetallic strips was made to understand the operation of bimetallic strip heat engines. This work enabled to theoretically demonstrate the capability of bimetallic to transform heat into mechanical energy and to evaluate the performances of such heat engines. Coupling between bimetallic strip heat engines and electro-mechanical transducers was also modeled to compare the performances of the current prototypes of generators. We then modeled the thermo-mechanical behavior of composite beams at the microscale and established scaling rules of the performances of the bimetallic strip heat engines, We finally developped microlectronic fabrication process to manufacture thermo-mechanically bistable beams at the microscale.

Augmenter la durée de vie d'une pile, voire s'en passer est aujourd'hui devenu une obligation pour les microsystèmes. En effet, à cette échelle, le remplacement des piles et leur rejet dans l'environnement sont problématiques. La voie préconisée pour répondre à cet enjeu est d'utiliser des sources d'énergie renouvelables (solaire, thermique et mécanique). Pour cela, nous proposons de développer une plateforme de récupération d'énergie multi-sources/multi-charges (MANAGY) capable de s'adapter à son environnement pour en extraire le maximum d'énergie et répondre à des applications diverses. L'architecture est constituée de chemins directs et de chemins indirects où l'énergie provenant des sources est d'abord transférée dans une unité de stockage avant d'être réutilisée par les charges du microsystème. L'utilisation de cette nouvelle architecture permet d'optimiser le transfert d'énergie entre sources et charges et améliore le rendement du système de 33%. Avant de développer une architecture multi-sources, nous avons cherché à améliorer le rendement de la source photovoltaïque (PV) qui, au vu de l'état de l'art, a la densité de puissance la plus élevée. La recherche du rendement maximum de la source PV revient à la recherche du point de puissance maximum (MPPT). Il existe pour chaque condition d'irradiance, de température, et d'énergie extraites un couple tension-courant permettant à la source de fournir un maximum de puissance (MPP). Grâce à l'utilisation de deux chemins de puissance, nous arrivons simultanément à créer une boucle de régulation faible puissance agissant sur le rapport cyclique du système de gestion d'énergie (MPPT) et une boucle de régulation de la tension de sortie agissant sur le transfert de l'énergie. La modélisation du système nous a permis de spécifier ses performances. Pour atteindre les performances requises, des architectures innovantes ont été réalisées qui ont fait l'objet de trois brevets. De plus, des blocs ne sont activés qu'aux instants de changement d'état du système et sont conçus, quand cela a été possible, avec des transistors fonctionnant en mode faible inversion. Toutes ces optimisations permettent au système de fonctionner sur une large plage de variation de l'éclairement (de conditions intérieures supérieures à 500 lux à extérieures) avec un rendement proche de 90%. / Enhancing the life time of battery or being able to work without it is today mandatory for microsystems. Most of systems are nowadays limited by the capacity of the embedded battery. Moreover the replacement and waste of baterries is no more possible at this scale. One way to achieve longer life time is the use of renewable energy sources (solar, thermal, or kinetic). This work proposes to develop a new energy harvesting platform with numerous sources and loads (MANAGY) able to adapt itself to the surrounding environment in order to extract the maximum of energy while answering to various of applications. The architecture is composed of directs and indirects power paths where the extracted energy coming from renewable sources is firstly transferred to a storage unit before being used by loads. This novel architecture makes it possible to optimize the energy transfer between sources and loads and to achieve a 33% gain. Before developing this architecture with numerous sources, we have searched to enhance the efficiency of the photovoltaic source which has the best power density at the state of the art. Looking for improving the efficiency of the PV source is the same as tracking the maximum power point (MPPT). There is for each irradiance, temperature and quantity of energy extracted a couple of voltage and current enabling the PV source to deliver the maximum of power (MPP). Thanks to the two power paths used we are able to create a low power feedback loop adjusting the duty cycle from the power management unit (MPPT) while having a second feedback loop optimizing the power transfer and regulating the output voltage. Thanks to a high level model we have specified the system performances. To achieve the performances required we have realized novel architectures protected through three patents. Moreover, blocs are only activated when the system changes its state and furthermore there are designs, when achievable, with transistors working in weak inversion. All these optimizations make the system working for a large range of irradiance (from inside conditions higher than 500 lux to outdoor conditions) with an efficiency close to 90%.

The purpose of this research is to design and integrate a symbiotic notched-turbine energy generator for implantation as a cross-coupled system capable of continuously and perpetually powering an electronic implantable medical device (IMD), which is a device designed to operate inside the body of a higher mammal to enhance, correct or provide the body with a function that has deviated from the norm or has stopped altogether. The list of IMDs available for implantation keeps growing every year, one of the newest being the VBLOC, produced by EnteroMedics®, and approved by the Food and Drug Administration (FDA) on January 15th, 2015[1], [2] to treat obesity in the United States, in lieu of the more dangerous and costly bariatric surgery widely used to treat the same condition. Some of the more traditional IMDs, such as the cardiac defibrillator, pacemaker, and insulin pumps require the use of a battery system for their operation. The powering of IMDs is a topic of growing importance and as such, the energy released by the hydrodynamic action of the cardiovascular system of a higher mammal is presented in this work as a source of energy that can be converted into electricity by use of a microturbine, loaded with magnetic rings that induce a time-varying magnetic field onto a set of insulated coils through the process of electromagnetic induction (EMI) in accordance with Faraday’s Law. This work goes beyond mere power production and focuses on the process required to integrate this power source with an IMD when it is coupled to the cardiovascular system for drawing hydro-mechanical power for conversion to electricity and to the IMD of choice to xii deliver the conditioned power, thus replicating a symbiotic process. The harvested energy in the form of a time-varying tri-phase sine wave is therefore rectified, conditioned and made available for use to the IMD. The proposed 3-phase generator has a volume of 1.02 cm3 and has the potential to be implemented as a dual or quad system that doubles or quadruples the single generator power capabilities accordingly. The rectifying and conditioning circuits may be housed in a hermetically sealed container, covered with a biocompatible material such as, ultra-high molecular weight polyethylene (UHMWPE), polymethylmethacrylate (PMMA) or titanium, which can afford the best implantation properties such as non-absorbability, durability, hardness, and biocompatibility [4]. Additionally, the prevention of blood clotting is of paramount importance in any IMD, which can be helped, for example by treating its surface with Tethered-Liquid Perfluorocarbons (TLP) to prevent biofilm formation of the blood that typically leads to infections and clotting[5].

Nanostructuring functional materials can lead to a variety of enhanced intrinsic material properties. In particular, nanowires (NWs) have large surface-to-volume ratio and large aspect ratio (length / diameter), which makes them sensitive to low-amplitude vibrations and have increased flexibility compared to the bulk form of the material. In this thesis, piezoelectric, ferroelectric, ferromagnetic and magnetoelectric (ME) NWs have been explored in the context of vibrational energy harvesting and magnetic energy harvesting and sensing; because of their increased piezoelectric coefficients and ME coupling compared to bulk. Low-temperature, solution-processable and hence scalable fabrication techniques have been used throughout this work. Electrochemical deposition or electrodeposition (ED) in conjunction with nanoporous templates i.e. template-assisted electrodeposition (TAED) have been used to grow piezoelectric zinc oxide (ZnO) and ferromagnetic nickel (Ni) NWs and three template-wetting based techniques have been used to grow ferroelectric poly(vinylidene fluoride trifluoroethylene) (P(VDF-TrFE)) NWs and nanotubes (NTs). Both techniques have been optimised and subsequently combined to synthesise core-shell or (1-1) Ni - P(VDF-TrFE) composite NWs. The structural and crystalline properties of each type of nanostructure has been studied using a variety of techniques including: scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDX), X-ray diffraction (XRD) and transmission electron microscopy (TEM) and all of the NWs have been shown to be polycrystalline. The energy harvesting performance of vertically aligned ZnO NW arrays embedded in flexible, polycarbonate (PC) templates when incorporated into a flexible nanocomposite nanogenerator (NG), has been tested via periodic impacting and flexing of the NG at different frequencies. The voltage ($V$), current ($I$) and power were recorded during testing and measured across a range of external load resistances. The aligned nature of the embedded NWs ensures good piezoelectric performance across the entire device under impacting, while the PC template ensures mechanical stability and longevity of the device, confirmed by good fatigue performance over 24 hours of continuous testing, which is rarely studied in this field. The power density ($P_\mathrm{d}$) was found to be 151 mW m$^{-3}$ for low-amplitude (0.68 mm) and low-frequency (5 Hz) impacting, resulting in energy conversion efficiencies ($\chi$) and device efficiencies ($\chi$') of $\approx$ 4.2 \% and $\approx$ 3.76 x 10$^{-3}$ \% respectively. The nanoscale or surface piezoelectric charge coefficient ($d_{33}$) was measured to be $\approx$ 12.5 pm V$^{-1}$ on an individual ZnO NW, using a combination of Kelvin probe force microscopy (KPFM) and non--destructive piezoresponse force microscopy (ND-PFM). Both nanoscale and bulk ME measurements have been performed on Ni - P(VDF-TrFE) ME composite (1-1) NWs, nanocomposite (1-3) films and (2-2) laminates. The latter two structures have been fabricated using TAED and ED for the Ni NW and film respectively, in combination with drop-casting and spin-coating for the P(VDF-TrFE) films. The scanning probe microscopy (SPM) measurements used here include atomic force microscopy (AFM), KPFM, magnetic force microscopy (MFM) and piezoresponse force microscopy (PFM) and it has been found that the ME coupling in the (1-1) composites NWs is enhanced compared to the other structures, confirmed by approximating the converse ME coupling coefficient ($\alpha^\mathrm{C}$) of each composite. Additionally, vibrating sample magnetometry (VSM) has been used to confirm the ferromagnetic nature of the Ni phases in the composite structures. ME composite devices based on (2-2) and (1-3) composite materials and have been fabricated and preliminary bulk ME measurements of the ME coupling coefficient ($\alpha^\mathrm{E}$) plus energy harvesting measurements have also been performed as a proof of concept that the nanoscale ME coupling translates to the bulk, to some extent.

The wireless sensor network (WSN) is increasingly used in many areas nowadays. It can be applied to provide the solutions to environmental problems, help increasing security and safety systems, and make the detection of the problems more efficient, e.g. the earthquake or tidal wave, which will harmful to humans. The WNS is durable and resistant to all types of terrain and climate, but while the WSN system is more and more widespread, one of the obstacles hindering the growth of this technology and the demand for WSN applications is the limited battery lifespan. Consequently, there is a significant requirement for techniques for prolonging the battery’s lifespan. Therefore, one potential solution is to use alternative energy sources combined with the sensor nodes in WSN, specifically energy harvesting from existing environmental sources. This research project reviews the characteristics of each kind of energy harvesting, understanding the various energy sources (solar energy, vibration energy and wind power), including wireless power transfer (WPT) by using electromagnetic (EM) radiation energy transfer or RF radio-frequency emission and magnetic coupled energy transfer. They are adopted for extending node’s life in the WSN, based on published information. Then it compares these diverse alternative energy methods and identifies for the most suitable energy harvesting method for application to wireless sensor nodes in order to prolong the lifespan of the battery. The major findings from the researcher include that wireless power transfer energy harvesting (WPT) using the magnetic field is the most appropriate tool for extending the lifespan of the WSN system. In addition, the author also designed an experiment to test this alternative energy, achieving by modelling the wireless power transfer with four coils. From the experimental results, it can be seen that the WPT technique using energy harvesting with magnetic inductive source can be applied to prolong the lifespan of the WSN system.

abstract: Recently, nanostructured metamaterials have attracted lots of attentions due to its tunable artificial properties. In particular, nanowire/nanohole based metamaterials which are known of the capability of large area fabrication were intensively studied. Most of the studies are only based on the electrical responses of the metamaterials; however, magnetic response, is usually neglected since magnetic material does not exist naturally within the visible or infrared range. For the past few years, artificial magnetic response from nanostructure based metamaterials has been proposed. This reveals the possibility of exciting resonance modes based on magnetic responses in nanowire/nanohole metamaterials which can potentially provide additional enhancement on radiative transport. On the other hand, beyond classical far-field radiative heat transfer, near-field radiation which is known of exceeding the Planck’s blackbody limit has also become a hot topic in the field. This PhD dissertation aims to obtain a deep fundamental understanding of nanowire/nanohole based metamaterials in both far-field and near-field in terms of both electrical and magnetic responses. The underlying mechanisms that can be excited by nanowire/nanohole metamaterials such as electrical surface plasmon polariton, magnetic hyperbolic mode, magnetic polariton, etc., will be theoretically studied in both far-field and near-field. Furthermore, other than conventional effective medium theory which only considers the electrical response of metamaterials, the artificial magnetic response of metamaterials will also be studied through parameter retrieval of far-field optical and radiative properties for studying near-field radiative transport. Moreover, a custom-made AFM tip based metrology will be employed to experimentally study near-field radiative transfer between a plate and a sphere separated by nanometer vacuum gaps in vacuum. This transformative research will break new ground in nanoscale radiative heat transfer for various applications in energy systems, thermal management, and thermal imaging and sensing. / Dissertation/Thesis / Doctoral Dissertation Mechanical Engineering 2017

abstract: Energy harvesting from ambient is important to configuring Wireless Sensor Networks (WSN) for environmental data collecting. In this work, highly flexible thermoelectric generators (TEGs) have been studied and fabricated to supply power to the wireless sensor notes used for data collecting in hot spring environment. The fabricated flexible TEGs can be easily deployed on the uneven surface of heated rocks at the rim of hot springs. By employing the temperature gradient between the hot rock surface and the air, these TEGs can generate power to extend the battery lifetime of the sensor notes and therefore reduce multiple batteries changes where the environment is usually harsh in hot springs. Also, they show great promise for self-powered wireless sensor notes. Traditional thermoelectric material bismuth telluride (Bi2Te3) and advanced MEMS (Microelectromechanical systems) thin film techniques were used for the fabrication. Test results show that when a flexible TEG array with an area of 3.4cm2 was placed on the hot plate surface of 80°C in the air under room temperature, it had an open circuit voltage output of 17.6mV and a short circuit current output of 0.53mA. The generated power was approximately 7mW/m2. On the other hand, high pressure, temperatures that can reach boiling, and the pH of different hot springs ranging from <2 to >9 make hot spring ecosystem a unique environment that is difficult to study. WSN allows many scientific studies in harsh environments that are not feasible with traditional instrumentation. However, wireless pH sensing for long time in situ data collection is still challenging for two reasons. First, the existing commercial-off-the-shelf pH meters are frequent calibration dependent; second, biofouling causes significant measurement error and drift. In this work, 2-dimentional graphene pH sensors were studied and calibration free graphene pH sensor prototypes were fabricated. Test result shows the resistance of the fabricated device changes linearly with the pH values (in the range of 3-11) in the surrounding liquid environment. Field tests show graphene layer greatly prevented the microbial fouling. Therefore, graphene pH sensors are promising candidates that can be effectively used for wireless pH sensing in exploration of hot spring ecosystems. / Dissertation/Thesis / Doctoral Dissertation Exploration Systems Design 2018

Issus de l'industrie de la microélectronique, les MEMS envahissent progressivement le marché avec des applications dans de nombreux domaines tels que l'aérospatiale, la médecine, l'industrie ou encore le grand public. Une des vocations de ces microstructures est de permettre le déploiement de réseaux de capteurs autonomes. Grâce à la miniaturisation, les systèmes deviennent de moins en moins consommateurs d'énergie et ceci permet de concevoir de nouvelles sources d'énergie basées sur la récupération de l'énergie ambiante (soleil, gradients de température,…). Il est par exemple possible de récupérer l'énergie des vibrations ambiantes à l'aide de systèmes piézoélectriques, électromagnétiques ou encore électrostatiques. Dans ce travail de thèse, nous nous concentrons sur l'étude de structures électrostatiques utilisant les électrets (diélectriques chargés électriquement). / Developed from the microelectronics industry, MEMS (Micro-Electro-Mechanical Systems) gradually invade the market with applications in many fields such as aerospace, medicine, industry or the general public. One of the purposes of these microstructures is to allow the deployment of autonomous sensor networks, that is to say a set of structures that can collect information from their environment, process, transmit and interact between them, without any human intervention. How to power these autonomous Microsystems? Use batteries… Unfortunately, the major flaw of batteries is their lifetimes, since it will be necessary to replace or to refill them after some months or some years. Actually, thanks to miniaturization, microsystems consume less and less energy, giving them the opportunity to harvest energy from their surrounding environment (sunlight, temperature gradients…). It is also possible to harvest energy directly from ambient vibration using piezoelectric, electromagnetic or electrostatic devices. In this mid-thesis work, we focus on the study of electrostatic structures using electret (electrically charged dielectrics). From the study of electrets to the fabrication and the optimization of electrostatic energy harvesters, we expose in this report, the results we obtained during this thesis.

Dans ce travail de thèse nous nous sommes intéressés principalement à la récupération de l'énergie mécanique et plus particulièrement l'énergie vibratoire. Cette technologie repose sur l'utilisation des transducteurs résonants, ces dispositifs permettent d'amplifier l'amplitude de vibration et donc de stocker d'avantage d'énergie mécanique dans le convertisseur à la résonance. La quantité de l'énergie en sortie du convertisseur chute lorsque la fréquence de vibration n'est plus égale à la fréquence de résonance, il est donc nécessaire d'assurer un asservissement de la fréquence de résonance de la structure de récupération d'énergie vibratoire sur la fréquence de vibration, si possible sur tout le spectre fréquentiel que couvre la source de vibration. L'objectif de la thèse est de proposer des solutions, à basse consommation, permettant d'assurer un ajustement dynamique en temps réel de la fréquence de résonance en fonction de la fréquence de vibration. Les travaux de cette thèse s'articulent autour de trois solutions : 1) Ajustement de la fréquence de résonance par application d'un champ électrique dans un matériau piézoélectrique 2) Ajustement de la fréquence de résonance par adaptation de la charge électrique d'un matériau piézoélectrique 3) Amplification du mouvement vibratoire par technique de rebond Une modélisation et optimisation à la fois de la plage de fréquence de fonctionnement et de la conversion mécano-électrique ont été réalisées. Trois structures ont été développées et testées et permettent de valider chacune des trois approches. Enfin, une électronique très basse consommation a été mise au point pour asservir en temps réel la fréquence de résonance sur la fréquence de la source de vibration et optimiser le taux d'énergie électrique extraite du système (pour maintenir un facteur de qualité de la structure optimum). / The work of this thesis is focused on the mechanical energy harvesting. This technology is generally based on the use of resonant transducers. Such systems work efficiently when their resonant frequency is equal to the vibration one. Otherwise, the output power from the harvester drops dramatically. Hence, it's necessary to ensure a continuous control of the resonant frequency of the harvester in order to avoid a possible shift between the resonant frequency and the vibration one, and doing this over the frequency spectrum covered by the vibration source. The main goal of this thesis is to develop new efficient solutions able to control in real time and tune the resonant frequency, these solutions should be low power consumption. During this thesis, three solutions have been developed: 1) adjustement of the resonant frequency by applying an electric field on the piezoelectric material; 2) adjustement of the resonant by adapting the electrical load; 3) the amplification of the structure relative displacement using a rebound technique. Modelling and optimization of both the frequency adjustment techniques and the mechanical-to-electrical conversion were performed. Three structures have been developed, tested and used to validate the three approaches. Finally, a very low power consumption electronic has been developed for a real time control of the resonant frequency, by regarding the vibration frequency, and also to optimize the extracted electrical energy from the harvester by maintaining an optimum quality factor.

Les travaux de cette thèse portent sur la caractérisation du polymères piézoélectriques de PVDF et celles de ses composites avec un alliage à mémoire de forme, pour des applications de récupération l'énergie thermique. Tout d'abord, une discussion est donnée sur les avancées actuelles des technologies de récupération d'énergie ainsi que leurs intérêts économiques. Des valeurs typiques de l'énergie pouvant être générée sont estimées, ainsi que des énergies nécessaires pour certaines applications.Une attention particulière est accordée aux principes de fonctionnement des matériaux pyroélectriques et piézoélectriques. Le PVDF et l'alliage à mémoire de forme NiTiCu sont également introduits.Des techniques de caractérisation adaptées sont introduites pour par voie direct caractériser le PVDF en tant que générateur de charges électriques, et son aptitude à la récolte de l'énergie thermique. Puisque le PVDF est un matériau très souple, la flexion à quatre points, la flexion sur tube, et la machine de traction sont utilisés pour étudier sa réponse piézoélectriques directe en mode quasi-statique, ainsi que les changements de propriétés piézoélectriques sous contrainte. Des mesures d'auto-décharge sous différents champs électriques appliqués, températures et contraintes sont effectuées pour étudier la stabilité du matériau.Un concept de récupération d'énergie utilisant des composites de matériaux fonctionnels de familles différentes est introduit. Ici, le couplage entre un matériau piézo-/pyroélectrique et un alliage à mémoire de forme est proposé. Le voltage pyroélectrique simple est combiné avec un voltage piézoélectrique induit par la transformation de phase de l'alliage à mémoire de forme, pour augmenter l'énergie totale générée par le système en chauffant. Une preuve de concept est présentée d'abord pour un matériau semi-flexible basé sur une céramique PZT, et ensuite pour le PVDF qui est entièrement flexible.Enfin, un circuit de gestion d'énergie a été conçu et intégré au récupérateur d'énergie en PVDF. Les hauts pics de tension générés lors du chauffage or refroidissement sont abaissés par un convertisseur de type buck à deux étages jusqu'au une tension de sortie utile stable. L'énergie de sortie est utilisée pour alimenter une carte d'émission sans fil. Ainsi, une chaîne complète de génération d'énergie, exploitant des variations de température et allant jusqu'au l'émission de données représentatives de l'événement thermique survenu est présentée.Les résultats de ces travaux concernent un large spectre d'applications potentiels, particulièrement les capteurs autonomes sans fil, et des objets de l'Internet of Things, avec une flexibilité mécanique élevée, une épaisseur réduite et de faible coût de maintenance. / This work deals with the characterization of piezoelectric polymers PVDF and its composites with shape memory alloys, for thermal energy harvesting applications. First, we discuss current advancements on energy harvesting technologies as well as their economical interests. Typical values of energy that can be generated are given together with energies typically needed for applications.Particular attention is given to the functioning principles of pyroelectric and piezoelectric materials. PVDF and shape memory alloy NiTiCu are also introduced.Custom characterization techniques are introduced to characterize PVDF piezoelectric properties relevant to generator applications and to evaluate its suitability for thermal energy harvesting. Since PVDF is a very flexible material, four-point bending, tube bending and a tensile machine experiments are used to study its piezoelectric response in quasi-static mode, as well as changes in piezoelectric properties with increased strain. Self-discharge measurements under various applied electric fields, temperatures and strains are performed to study the stability of material.A concept of composite energy harvesting, utilizing two materials of different families, is introduced. Here, we propose the coupling of piezo-/pyroelectric material and shape memory alloy. The pure pyroelectric voltage is combined with generated piezoelectric voltage, induced by shape memory alloy transformation, to increase the total energy generated by the system during heating. The proof of concept is shown first for ceramic PZT-based semi-flexible material and then for fully flexible PVDF.Finally, a power management circuit was designed and integrated with the PVDF energy harvester. High generated voltage peaks at heating are lowered by a two-step buck converter to a useful stable output voltage. Output energy are used to power a wireless emission card. Thus, a complete power generation chain from temperature variations to data emission is presented.The results of this work concern a wide range of applications, especially modern autonomous wireless sensors and Internet of Things objects, with low profile, high mechanical flexibility and low maintenance costs.