付記する学位プログラム名: 京都大学卓越大学院プログラム「先端光・電子デバイス創成学」 / 京都大学 / 新制・課程博士 / 博士(工学) / 甲第24621号 / 工博第5127号 / 新制||工||1980(附属図書館) / 京都大学大学院工学研究科電子工学専攻 / (主査)教授 竹内 繁樹, 教授 川上 養一, 教授 木本 恒暢 / 学位規則第4条第1項該当 / Doctor of Philosophy (Engineering) / Kyoto University / DGAM

Polarization entangled photon pairs on demand are considered to be an important building block of quantum communication technology. It has been demonstrated that semiconductor quantum dots (QDs), which exhibit a certain spatial symmetry, can be used as a triggered, on-chip source of polarization entangled photon pairs. Due to limitations of the growth, the as-grown QDs usually do not exhibit the required symmetry, making the availability of post-growth tuning techniques essential. In this work first the QD-morphology of hundreds of QDs is correlated with the optical emission of neutral excitons confined in GaAs/AlGaAs QDs. It is presented how elastic anisotropic stress can be used to partially restore the symmetry of self-assembled GaAs/AlGaAs and InGaAs/GaAs QDs, making them as candidate sources of entangled photon pairs. As a consequence of the tuning of the QD-anisotropy we observe a rotation of the polarization of the emitted light. The joint modification of polarization orientation and QD anisotropy can be described by an anticrossing of the so-called bright excitonic states. Furthermore, it is demonstrated that anisotropic stress can be used to tune the purity of the hole states of the QDs by modifying the degree of heavy and light hole mixing. This ability might be interesting for applications using the hole spin as a so-called quantum bit.

Polarization entangled photon pairs on demand are considered to be an important building block of quantum communication technology. It has been demonstrated that semiconductor quantum dots (QDs), which exhibit a certain spatial symmetry, can be used as a triggered, on-chip source of polarization entangled photon pairs. Due to limitations of the growth, the as-grown QDs usually do not exhibit the required symmetry, making the availability of post-growth tuning techniques essential. In this work first the QD-morphology of hundreds of QDs is correlated with the optical emission of neutral excitons confined in GaAs/AlGaAs QDs. It is presented how elastic anisotropic stress can be used to partially restore the symmetry of self-assembled GaAs/AlGaAs and InGaAs/GaAs QDs, making them as candidate sources of entangled photon pairs. As a consequence of the tuning of the QD-anisotropy we observe a rotation of the polarization of the emitted light. The joint modification of polarization orientation and QD anisotropy can be described by an anticrossing of the so-called bright excitonic states. Furthermore, it is demonstrated that anisotropic stress can be used to tune the purity of the hole states of the QDs by modifying the degree of heavy and light hole mixing. This ability might be interesting for applications using the hole spin as a so-called quantum bit.

Semiconductor quantum dots (QDs) are fascinating systems for potential applications in quantum information processing and communication, since they can emit single photons and polarisation entangled photons pairs on demand. The asymmetry and inhomogeneity of real QDs has driven the development of a universal and fine post-growth tuning technique. In parallel, new growth methods are desired to create QDs with high emission efficiency and to control combinations of closely-spaced QDs, so-called "QD molecules" (QDMs). These systems are crucial for the realisation of a scalable information processing device after a tuning of their interaction energies. In this work, GaAs/AlGaAs QDs with low surface densities, high optical quality and widely tuneable emission wavelength are demonstrated, by infilling nanoholes fabricated by droplet etching epitaxy with different GaAs amounts. A tuning over a spectral range exceeding 10 meV is obtained by inducing strain in the dot layer. These results allow a fine tuning of the QD emission to the rubidium absorption lines, increasing the yield of single photons that can be used as hybrid semiconductor-atomic-interface. By embedding InGaAs/GaAs QDs into diode-like nanomembranes integrated onto piezoelectric actuators, the first device allowing the QD emission properties to be engineered by large electroelastic fields is presented. The two external fields reshape the QD electronic properties and allow the universal recovery of the QD symmetry and the generation of entangled photons, featuring the highest degree of entanglement reported to date for QD-based photon sources. A method for controlling the lateral QDM formation over randomly distributed nanoholes, created by droplet etching epitaxy, is demonstrated by depositing a thin GaAs buffer over the nanoholes. The effect on the nanohole occupancy of the growth parameters, such as InAs amount, substrate temperature and arsenic overpressure, is investigated as well. The QD pairs show good optical quality and selective etching post-growth is used for a better characterisation of the system. For the first time, the active tuning of the hole tunnelling rates in vertically aligned InGaAs/GaAs QDM is demonstrated, by the simultaneous application of electric and strain fields, optimising the device concept developed for the single QDs. This result is relevant for the creation and control of entangled states in optically active QDs. The modification of the electronic properties of QDMs, obtained by the combination of the two external fields, may enable controlled quantum operations.

Semiconductor quantum dots (QDs) are fascinating systems for potential applications in quantum information processing and communication, since they can emit single photons and polarisation entangled photons pairs on demand. The asymmetry and inhomogeneity of real QDs has driven the development of a universal and fine post-growth tuning technique. In parallel, new growth methods are desired to create QDs with high emission efficiency and to control combinations of closely-spaced QDs, so-called "QD molecules" (QDMs). These systems are crucial for the realisation of a scalable information processing device after a tuning of their interaction energies. In this work, GaAs/AlGaAs QDs with low surface densities, high optical quality and widely tuneable emission wavelength are demonstrated, by infilling nanoholes fabricated by droplet etching epitaxy with different GaAs amounts. A tuning over a spectral range exceeding 10 meV is obtained by inducing strain in the dot layer. These results allow a fine tuning of the QD emission to the rubidium absorption lines, increasing the yield of single photons that can be used as hybrid semiconductor-atomic-interface. By embedding InGaAs/GaAs QDs into diode-like nanomembranes integrated onto piezoelectric actuators, the first device allowing the QD emission properties to be engineered by large electroelastic fields is presented. The two external fields reshape the QD electronic properties and allow the universal recovery of the QD symmetry and the generation of entangled photons, featuring the highest degree of entanglement reported to date for QD-based photon sources. A method for controlling the lateral QDM formation over randomly distributed nanoholes, created by droplet etching epitaxy, is demonstrated by depositing a thin GaAs buffer over the nanoholes. The effect on the nanohole occupancy of the growth parameters, such as InAs amount, substrate temperature and arsenic overpressure, is investigated as well. The QD pairs show good optical quality and selective etching post-growth is used for a better characterisation of the system. For the first time, the active tuning of the hole tunnelling rates in vertically aligned InGaAs/GaAs QDM is demonstrated, by the simultaneous application of electric and strain fields, optimising the device concept developed for the single QDs. This result is relevant for the creation and control of entangled states in optically active QDs. The modification of the electronic properties of QDMs, obtained by the combination of the two external fields, may enable controlled quantum operations.