No description available.

A series of rapid, high sensitivity capillary electrophoresis (CE) separation systems have been developed for the analysis of biological analytes and systems. A majority of the work has focused on development of novel instrumentation, in which new injection and detection strategies were investigated to improve the sensitivity of fast CE. A novel optical injection interface for capillary zone electrophoresis based upon the photophysical activation of caged dye attached to the target analyte was developed. The primary advantage of this approach is the lower background and background-associated noise resulting from reduced caged-fluorescein emission in conjunction with the high quantum yield of the resulting fluorescein. Improved detection limits were obtained compared to those observed in photobleaching-based optical gating. A primary drawback of photolytic optical gating CE is the lack of available caged-dye analogs with sufficiently fast reaction kinetics for online derivatization. To overcome this limitation, we have developed a chemical derivatization scheme for primary amines that couples the fast kinetic properties of o-phthaldialdehyde (OPA) with the photophysical properties of visible, high quantum yield, fluorescent dyes. The feasibility of this approach was evaluated by using an OPA/fluorescent thiol reaction, which was used to monitor neurotransmitter mixtures and proteins. The utilization of a high power ultraviolet light emitting diode for fluorescence detection in CE separations has been introduced to analyze a range of environmentally and biologically important compounds, including polyaromatic hydrocarbons and biogenic amines, such as neurotransmitters, amino acids and proteins, that have been derivatized with UV-excited fluorogenic labels. To understand cellular chemistry, it is imperative that single cells should be studied. This work was focused on developing CE based method to characterize the cellular uptake of TAT-EGFP. We demonstrated TAT mediated delivery of EGFP protein into HeLa cells and TAT-EGFP loaded single cell was analyzed by CE-LIF to determine the intracellular EGFP content. An application of CE-LIF for the determination of biogenic amine levels in the antennal lobes of the Manduca sexta is also explored and methods were developed to analyze a single antennal lobe dissected from moths. The lobe was digested and contents were labeled with the fluorogenic dye prior to CZE analysis.

Please read the abstract in the section 00front of this document / Dissertation (MSc (Water Utilization))--University of Pretoria, 2006. / Chemical Engineering / unrestricted

Groundwater tracing studies have shown a well-developed conduit system in the karst aquifer beneath the Buffalo Creek Watershed of Carter County, TN. Groundwater can quickly travel beneath topographic divides, transporting contaminants. Using GIS and field reconnaissance, two sites were selected for a two phase dye trace study. In May-June 2016 groundwater resurgences were located using activated carbon samplers, and in October-December 2016 flow velocities were measured using ISCO automatic water samplers. In study 1, a stream sinking in the back of Carter Saltpeter Cave was traced to its resurgence at Cave Springs Cave. In study 2, the dye mass centroid passed the resurgence 23.2 hours after injection. During study 1, dye injected into a sinkhole near the headwaters of Toll Branch rapidly diffused into multiple conduits. In study 2, dye from the Toll Branch site was not recovered, indicating that groundwater follows different flow paths dependent on water table level.

No description available.

The formation of hypochlorous and hypobromous acids by heme peroxidases is a key property of certain immune cells. These products are not only involved in defense against pathogenic microorganisms and in regulation of inflammatory processes, but contribute also to tissue damage in certain pathologies. After a short introduction about experimental approaches for the assessment of the halogenating activity in vitro and in cell suspensions, we are focusing on novel applications of fluorescent dye systems to detect the formation of hypochlorous acid (HOCl) in leukocytes. Special attention is directed to properties and applications of the non-fluorescent dye aminophenyl fluorescein that is converted by HOCl, HOBr, and other strong oxidants to fluorescein. This dye allows the detection of the halogenating activity in samples containing free myeloperoxidase and eosinophil peroxidase as well as in intact granulocytes using fluorescence spectroscopy and flow cytometry, respectively.

In this thesis resonance energy transfer between perylene and fluorescein in tetradecyltrimethylammonium bromide (TTAB) solution was studied. The influence of addition of native or modified sodium hyaluronate on resonance energy transfer was also investigated. The addition of native sodium hyaluronate supports energy transfer at lower fluorescein concentrations and the addition of modified sodium hyaluronate influences the maximal value of energy transfer effectivity. Strong influence on the critical micelle concentration (CMC) values with the addition of sodium hyaluronate during CMC of TTAB determination was investigated. The data indicates not only micelles formation, but also formation of aggregates of sodium hyaluronate with TTAB. Aggregation numbers of TTAB with addition of native and modified sodium hyaluronate by the quenching of pyrene by cetylpyridinium chloride (CPC) was investigated. The addition of sodium hyaluronate into the solution of TTAB changes the average mean aggregation number. Solute exchange between micelles of TTAB and the influence of addition of modified sodium hyaluronate on this exchange was also investigated. No solute exchange between micelles in TTAB and in TTAB with added modified sodium hyaluronate was discovered during this experiment.

The formation of hypochlorous and hypobromous acids by heme peroxidases is a key property of certain immune cells. These products are not only involved in defense against pathogenic microorganisms and in regulation of inflammatory processes, but contribute also to tissue damage in certain pathologies. After a short introduction about experimental approaches for the assessment of the halogenating activity in vitro and in cell suspensions, we are focusing on novel applications of fluorescent dye systems to detect the formation of hypochlorous acid (HOCl) in leukocytes. Special attention is directed to properties and applications of the non-fluorescent dye aminophenyl fluorescein that is converted by HOCl, HOBr, and other strong oxidants to fluorescein. This dye allows the detection of the halogenating activity in samples containing free myeloperoxidase and eosinophil peroxidase as well as in intact granulocytes using fluorescence spectroscopy and flow cytometry, respectively.

Med hjälp av immunohistokemi kan antigen och antikroppar som är bundna till vävnaden detekteras. Autoimmuna hudsjukdomar är exempel på sjukdomar som diagnosticeras med immunohistokemi. På Falu lasarett användes immunofluorescens för diagnostik av autoimmuna hudsjukdomar. Syftet med denna studie var att optimera enzym-baserad immunohistokemi för epitoperna IgA, IgG, IgM och C3 och jämföra med immunofluorescens vad gäller specificitet, signalstyrka och upplösning. Vävnader som analyserades var tonsill, lever, tarmslemhinna och hudbiopsier. Fixering gjordes i 4% formaldehyd av vävnaderna som infärgades med ultraView DAB och ultraView DAB med FITC. Vävnad som infärgades med DIF med FITC sköljdes enbart i Reaction Buffer. Vävnaderna färgades enligt protokollen ultraView DAB, ultraView DAB med FITC och DIF med FITC. En manuell infärgning med aktiverat DAB utfördes. Resultatet visade bakgrundsinfärgning för samtliga infärgningar. DIF med FITC var tydligare infärgad och lättare att skilja mellan specifik och ospecifik infärgning. Det är svårt att optimera enzym-baserad IHC och epitopen IgA hade generellt starkare infärgning jämfört med epitopen IgM. För att erhålla tillförlitliga resultat krävs det att flera vävnadsprover analyseras. / Using immunohistochemistry, antigens and antibodies bound to the tissue can be detected. Autoimmune skin diseases are examples of diseases that are diagnosed with immunohistochemistry. At Falu Hospital, immunofluorescence was used to diagnose autoimmune skin diseases. The aim of this study was to optimize enzyme-based immunohistochemistry for the epitopes IgA, IgG, IgM and C3 and to compare with immunofluorescence in terms of specificity, signal strength and resolution. Tissues analyzed were tonsil, liver, intestinal mucosa and skin biopsies. Fixation was done in 4% formaldehyde of the tissues stained with ultraView DAB and ultraView DAB with FITC. Tissue stained with DIF with FITC was rinsed in Reaction Buffer only. A manual staining with activated DAB was performed. The result showed background staining for all stainings. DIF with FITC was more clearly stained and easier to distinguish between specific and nonspecific staining. It is difficult to optimize enzyme-based IHC and the epitope IgA generally had stronger staining compared to the epitope IgM. To obtain reliable results, several tissue samples must be analyzed.

A adição de corantes fluorescentes a adesivos odontológicos possibilita a investigação da distribuição espacial desses materiais na interface dente-restauração, utilizando-se a microscopia confocal de varredura a laser (MCVL). A literatura indica falta de padronização na aplicação de agentes fluorescentes com tal finalidade. Esse estudo sistematizou estratégias para a adição de rodamina B (RB) e fluoresceína sódica (FS) a um sistema adesivo convencional de três passos, Adper Scotchbond Multi-Purpose (MP), e um autocondicionante de dois passos, Clearfil SE Bond (SE), considerados padrão-ouro na Odontologia. Os objetivos principais foram (a) determinar a menor faixa de concentrações de RB e FS necessária para produzir imagens satisfatórias da interface dentina-adesivo e (b) avaliar o efeito da adição desses corantes sobre algumas propriedades das resinas. Os adesivos foram marcados com RB ou FS em concentrações decrescentes (0,5, 0,1, 0,02 e 0,004 mg/mL) por meio de um método de dispersão semidireto. O comportamento fotofísico/ fluorescente dos adesivos marcados foi investigado por espectroscopia de fotoluminescência e MCVL. Paralelamente, avaliaram-se os adesivos quanto ao grau de conversão (GC) e ao ângulo de contato (AC). Tanto os resultados de GC como os de AC foram submetidos à análise de variância com dois fatores (adesivo e tratamento) com = 0,05, seguida de teste post-hoc de Tukey. Os máximos comprimentos de onda de emissão e de excitação da RB e da FS foram influenciados pelo meio polimérico e pela concentração de corante de modo geral. A MCVL preliminar de amostras de adesivo polimerizado, realizada sob condições experimentais padronizadas, mostrou que o comportamento fluorescente da RB em MP e SE foi muito semelhante na mesma concentração de corante, mas o mesmo não pôde ser dito do comportamento da FS, que foi notavelmente inferior no adesivo autocondicionante, SE, na concentração mais alta. Em dentina, os adesivos preparados com RB nas concentrações-alvo de 0,1 e 0,02 mg/mL apresentaram fluorescência ótima; já aqueles preparados com 0,004 mg/mL produziram fraco sinal. Adesivos preparados com FS a 0,5 mg/mL apresentaram ótima fluorescência na interface de adesão, enquanto que concentração menor desse corante não produziu sinal suficiente. Padrões morfológicos aparentemente atípicos foram observados na interface de adesão, quando da associação do adesivo SE com o corante FS. A adição de RB e FS nas quatro concentrações indicadas aos adesivos MP e SE não afetou o GC nem o AC em comparação com os grupos de controle correspondentes. Em suma, a RB mostra-se um corante mais versátil que a FS na avaliação morfológica das interfaces dentina-MP e dentina-SE via MCVL. A menor faixa de concentrações de RB nos adesivos MP e SE, na qual é possível produzir imagens satisfatórias das interfaces, situa-se entre 0,10,02 mg/mL. Já o corante FS deve ser adicionado a esses adesivos a pelo menos 0,5 mg/mL para produzir níveis de fluorescência satisfatórios na interface de adesão. A não ocorrência de efeitos deletérios sobre a polimerização e a molhabilidade das resinas estabelece uma margem de segurança para a incorporação desses agentes fluorescentes (em concentração 0,5 mg/mL) nesses sistemas monoméricos. / The addition of fluorescent dyes to dental adhesives makes it possible to investigate the spatial distribution of such resin-based materials in the tooth-restoration interface, using confocal laser scanning microscopy (CLSM). Literature indicates a lack of standardization on the application of fluorescent agents for this purpose. This work presents strategies for adding rhodamine B (RB) and fluorescein sodium salt (FS) to a three-step etch-and-rinse adhesive system, Adper Scotchbond Multi-Purpose (MP), and a two-step self-etching one, Clearfil SE Bond (SE), both regarded as \"gold standard\" in restorative dentistry. The main objectives were (a) to determine the lowest range of RB and FS concentrations required to produce suitable images of the dentin-adhesive interface via CLSM and (b) to investigate potential effects of addition of these dyes on some resin properties. The adhesives were labeled with RB or FS at decreasing concentrations (0.5, 0.1, 0.02 and 0.004 mg/mL) by means of a semi-direct dispersion method. The photophysical/fluorescent behavior of the labeled resins was investigated by photoluminescence spectroscopy and by CLSM. The adhesives were also investigated with regards to the degree of conversion (DC) and contact angle (CA). A two-way ANOVA of adhesive and treatment was conducted on DC and CA separately, followed by Tukeys test. The maximum emission and excitation wavelengths of RB and FS were influenced by the host polymer and the dye concentration in general. The preliminary CLSM of cured adhesive samples, performed with standardized settings, showed that the fluorescent behavior of RB in MP and SE was very similar in the same dye concentration, unlike the behavior of FS, which was lower in the self-etching adhesive for the highest dye concentration. In dentin, the adhesives prepared with RB at the target concentrations of 0.1 and 0.02 mg/mL presented optimal fluorescence; those with 0.004 mg/mL produced poor signal. Adhesives prepared with FS at 0.5 mg/mL presented optimal fluorescence at the bonding interface, whereas lower concentrations of FS did not produce sufficient signal. Atypical morphological features were observed at the bonding interface, when adhesive SE was used with FS. The addition of RB and FS at the four decreasing concentrations to adhesives MP and SE did not affect DC or CA compared to the corresponding controls. In short, RB is more versatile than FS for the morphological characterization of dentin-MP and dentin-SE interfaces via MCVL. The lowest range of RB concentrations in adhesives MP and SE that can produce suitable images of the bonding interface lies between 0.10.02 mg/mL. The dye FS should be added to these adhesives at 0.5 mg/mL at least to produce satisfactory fluorescence levels at the bonding interface. Since negative effects on polymerization and wettability of the resins were not observed, the use of RB and FS (in concentration 0.5 mg/mL) together with MP and SE should be reliable in terms of resin properties.