New applications of the optically stimulated luminescence (OSL) dating were carried out with the aim of understanding late Quaternary activities for the Tibetan Plateau. This included studying the slip rate of the Altyn Tagh Fault, northeast Tibetan Plateau, and revealing the environmental changes derived from large inland lake’s evolution, central south Tibet. Two deflected streams across the Altyn Tagh Fault close to Aksay (39°24.572’N, 94°16.012’E) were investigated. Geomorphological analysis suggests that loess covering deflected stream banks has recorded past faulting events. A conceptual model is proposed illustrating the relationship. OSL dating of sixteen loess samples at both streams support the model, suggesting the loess is deposited episodically after fault strikes and subsequent channel wall refreshment. The age and offset indicate a slip rate of 11 ±2 mm/yr for this part of the Altyn Tagh Fault. Another river section near Aksay was also investigated for the slip rate information. Two risers between three terraces are clearly offset; OSL dating of loess covering terrace surfaces yielded terrace ages. Using the upper-terrace age to represent riser displacement duration, the rate is estimated to be 12 ±1 mm/yr. The result suggests that using upper terrace is more suitable in this region. Notably, though, the slow rate is at odds with proposals that assume high-speed extrusion (~23 mm/year) of the Tibetan Plateau being accommodated by the Altyn Tagh Fault. Palaeo-shorelines around the third largest lake in Tibet, Zhari Namco, were for the first time systematically investigated using OSL dating. Twenty-two sediment samples from eleven shorelines indicate that the water level has dropped ~128 m and the lake has undergone stepwise shrinkage since 8.2 ka. Digital elevation model calculation indicates the lake has shrunk from 4605 km2 in size at 8.2 ka to 996 km2 at present, which is equivalent to ~300 km3 of water. This implies a significant reduction in precipitation over the past 8.2 ka, a result of weakening Indian Monsoon or a shift of monsoon circulation path. The result is consistent with other lake-core, ice-core climate proxies and solar insolation changes, implying the dominance of a weakening Indian Monsoon over central Tibet in the Holocene. Using the elevation of the highest shoreline of the four largest lakes in Tibet, the early Holocene Pan-lake hypothesis is proposed for the central Tibet. In addition to these applications of OSL dating, technical studies on sensitivity changes and residual doses have been carried out for potassium rich feldspar (K-feldspar). Recent development of infrared stimulated luminescence (IRSL) signals from K-feldspar has shown great potential for extending the datable range for OSL dating. Sensitivity changes and residual doses of post-IR IRSL and multi-elevated -temperature post-IR IRSL protocols for K-feldspar were studied. A sensitivity decrease is observed after adopting a high temperature IRSL. IRSL signals stimulated at high temperature are found to contain large residual doses. The residual dose rises with stimulation time, suggesting that the initial part of IRSL signals contains more easy-to-bleach signals comparing with the later part. / published_or_final_version / Earth Sciences / Doctoral / Doctor of Philosophy

The northwest part of the North America-Caribbean plate boundary zone is characterized by active, left-lateral strike-slip faults that are well constrained seismically and are corroborated by on- and offshore geologic mapping. The onshore plate boundary zone comprises the Motogua and Polochic fault systems of southern Guatemala which join and continue offshore as the Swan Islands fault zone along the southern edge of the Cayman trough. At the Mid-Cayman spreading center in the central Caribbean Sea, the fault motion is transferred at a 100 km wide left-step in the fault system to the Oriente fault zone. A third system, the Walton fault zone, continues east from the Mid-Cayman Spreading center to define the Gonave microplate. Seafloor features produced by strike-slip faulting along the Swan Islands and Walton fault zones have been imaged and mapped using the SeaMARC II side-scan sonar and swath bathymetric mapping system, single-channel seismic data, multichannel seismic data and 3.5 kHz depth profiles. Structures mapped along the Swan Islands and Walton fault zones include: 1) twenty-six restraining bends and five releasing bends ranging in size from several kilometers in area to several hundred kilometers in area; 2)en echelon folds which occur only within the restraining bends; 3) straight, continuous fault segments of up to several tens of kilometers in length; 4) restraining and releasing bends forming in "paired" configurations; and 5) a fault-parallel fold belt fold and thrust belt adjacent to a major restraining bend. The features observed along the Swan Islands and Walton fault systems are compared to other features observed along other strike-slip fault systems, from which empirical models have previously been derived. Based on the features observed in these strike-slip systems, a rigid plate scenario is envisioned where the geometry of the fault and the direction of plate motion have controlled the types of deformation that have occurred. In a related study, microtectonic features in an area of Neogene extension within the northwestern Caribbean plate were investigated in order to provide insight on the nature of intraplate deformation related to the motion along the plate boundary. Microtectonic features were measured in the Sula-Yojoa rift of northwestern Honduras with the intention of inverting the data to estimate stress states responsible for the observed strains. Data inversion for the estimation of stress states could not be undertaken with the available measurements, however, the observations made can be used to support several existing models for the intraplate deformation as well as to encourage the elimination of other models. / text

Not available / text / text

A strip in Taos County, New Mexico, eight miles long and three miles wide along New Mexico Highway 3 from U.S. Hill to Talpa, Fort Burgwin Ridge, has outcrops of Precambrian metaquartzite (1800 my bp) and cataclastic granite (1760 my bp) overlain by Mississippian limestone and Pennsylvanian fan delta sediments of the western Taos Trough. Twelve cross sections are used to demonstrate (1) Pennsylvanian syndepositional vertical movements, (2) Laramide thrusting that folded the Mississippian and Pennsylvanian rocks along splay faults to the east of the Pecos-Picuris Fault (see Fig. 40), and (3) Late Miocene to present-day normal and strike slip faulting, which is related to Rio Grande Graben rifting and appears to have reactivated earlier fault zones. The north-trending structures appear to be subsidiary to the Pecos-Picuris Fault, a major geofracture that parallels the map area to the west. / text

No description available.

No description available.

No description available.

The Alpine Fault is the major structure of the Pacific-Australian plate boundary through New Zealand�s South Island. During dextral reverse fault slip, a <5 million year old, ~1 km thick mylonite zone has been exhumed in the hanging-wall, providing unique exposure of material deformed to very high strains at deep crustal levels under boundary conditions constrained by present-day plate motions. The purpose of this study was to investigate the fault zone rheology and mechanisms of strain localisation, to obtain further information about how the structural development of this shear zone relates to the kinematic and thermal boundary constraints, and to investigate the mechanisms by which the viscously deforming mylonite zone is linked to the brittle structure, that fails episodically causing large earthquakes. This study has focussed on the central section of the fault from Harihari to Fox Glacier. In this area, mylonites derived from a quartzofeldspathic Alpine Schist protolith are most common, but slivers of Western Province-derived footwall material, which can be differentiated using mineralogy and bulk rock geochemistry, were also incorporated into the fault zone. These footwall-derived mylonites are increasingly common towards the north. At amphibolite-facies conditions mylonitic deformation was localised to the mylonite and ultramylonite subzones of the schist-derived mylonites. Most deformation was accommodated by dislocation creep of quartz, which developed strong Y-maximum crystallographic preferred orientation (CPO) patterns by prism (a) dominant slip. Formation of this highly-oriented fabric would have led to significant geometric softening and enhanced strain localisation. During this high strain deformation, pre-existing Alpine Schist fabrics in polyphase rocks were reconstituted to relatively well-mixed, finer-grained aggregates. As a result of this fabric homogenisation, strong syn-mylonitic object lineations were not formed. Strain models show that weak lineations trending towards ~090� and kinematic directions indicated by asymmetric fabrics and CPO pattern symmetry could have formed during pure shear stretches up-dip of the fault of ~3.5, coupled with simple shear strains [greater than or equal to]30. The preferred estimate of simple:pure shear strain gives a kinematc vorticity number, W[k] [greater than or equal to]̲ 0.9997. Rapid exhumation due to fault slip resulted in advection of crustal isotherms. New thermobarometric and fluid inclusion analyses from fault zone materials allow the thermal gradient along an uplift path in the fault rocks to be more precisely defined than previously. Fluid inclusion data indicate temperatures of 325+̲15�C were experienced at depths of ~45 km, so that a high thermal gradient of ~75�C km⁻� is indicated in the near-surface. This gradient must fall off to [ less than approximately]l0�C km⁻� below the brittle-viscous transition since feldspar thermobarometry, Ti-inbiotite thermometry and the absence of prism(c)-slip quartz CPO fabrics indicate deformation temperatures did not exceed ~ 650�C at [greater than or equal to] 7.0-8.5�1.5 kbar, ie. 26-33 km depth. During exhumation, the strongly oriented quartzite fabrics were not favourably oriented for activation of the lower temperature basal(a) slip system, which should have dominated at depths [less than approximately]20 km. Quartz continued to deform by crystal-plastic mechanisms to shallow levels. However, pure dislocation creep of quartz was replaced by a frictional-viscous deformation mechanism of sliding on weak mica basal planes coupled with dislocation creep of quartz. Such frictional-viscous flow is particularly favoured during high-strain rate events as might be expected during rupture of the overlying brittle fault zone. Maximum flow stresses supported by this mechanism are ~65 Mpa, similar to those indicated by recrystallised grain size paleopiezometry of quartz (D>25[mu]m, indicating [Delta][sigma][max] ~55 MPa for most mylonites). It is likely that the preferentially oriented prism (a) slip system was activated during these events, so the Y-maximum CPO fabrics were preserved. Simple numerical models show that activation of this slip system is favoured over the basal (a) system, which has a lower critical resolved shear stress (CRSS) at low temperatures, for aggregates with strong Y-maximum orientations. Absence of pervasive crystal-plastic deformation of micas and feldspars during activation of this mechanism also resulted in preservation of mineral chemistries from the highest grades of mylonitic deformation (ie. amphibolite-facies). Retrograde, epidote-amphibolite to greenschist-facies mineral assemblages were pervasively developed in ultramylonites and cataclasites immediately adjacent to the fault core and in footwall-derived mylonites, perhaps during episodic transfer of this material into and subsequently out of the cooler footwall block. In the more distal protomylonites, retrograde assemblages were locally developed along shear bands that also accommodated most of the mylonitic deformation in these rocks. Ti-in-biotite thermometry suggests biotite in these shear bands equilibrated down to ~500+̲50�C, suggesting crystal-plastic deformation of this mineral continued to these temperatures. Crossed-girdle quartz CPO fabrics were formed in these protomylonites by basal (a) dominant slip, indicating a strongly oriented fabric had not previously formed at depth due to the relatively small strains, and that dislocation creep of quartz continued at depths [less than or equal to]20 km. Lineation orientations, CPO fabric symmetry and shear-band fabrics in these protomylonites are consistent with a smaller simple:pure shear strain ratio than that observed closer to the fault core (W[k] [greater than approximately] 0.98), but require a similar total pure shear component. Furthermore, they indicate an increase in the simple shear component with time, consistent with incorporation of new hanging-wall material into the fault zone. Pre-existing lineations were only slowly rotated into coincidence with the mylonitic simple shear direction in the shear bands since they lay close to the simple shear plane, and inherited orientations were not destroyed until large finite strains (<100) were achieved. As the fault rocks were exhumed through the brittle-viscous transition, they experienced localised brittle shear failures. These small-scale seismic events formed friction melts (ie. pseudotachylytes). The volume of pseudotachylyte produced is related to host rock mineralogy (more melt in host rocks containing hydrated minerals), and fabric (more melt in isotropic host rocks). Frictional melting also occurred within cataclastic hosts, indicating the cataclasites around the principal slip surface of the Alpine Fault were produced by multiple episodes of discrete shear rather than distributed cataclastic flow. Pseudotachylytes were also formed in the presence of fluids, suggesting relatively high fault gouge permeabilities were transiently attained, probably during large earthquakes. Frictional melting contributed to formation of phyllosilicate-rich fault gouges, weakening the brittle structure and promoting slip localisation. The location of faulting and pseudotachylyte formation, and the strength of the fault in the brittle regime were strongly influenced by cyclic hydrothermal cementation processes. A thermomechanical model of the central Alpine Fault zone has been defined using the results of this study. The mylonites represent a localised zone of high simple shear strain, embedded in a crustal block that underwent bulk pure shear. The boundaries of the simple shear zone moved into the surrounding material with time. This means that the exhumed sequence does not represent a simple 'time slice' illustrating progressive fault rock development during increasing simple shear strains. The deformation history of the mylonites at deep crustal P-T conditions had a profound influence on subsequent deformation mechanisms and fabric development during exhumation.

Thesis (M. Sc.)--University of Canterbury, 2007. / Typescript (photocopy). "September 2007." Includes bibliographical references (leaves 83-89). Also available via the World Wide Web.

Thesis (Ph. D.)--University of Texas at Austin, 2007. / Vita. Includes bibliographical references.