This masters’s thesis deals with a feasibility study of new company creation. The company would be active in the area of online ticket sales for small-time cultural events. Suggestions for a solution relating to the enterprise and enabling the company to optimally entry to the market are presented, based on theoretical knowledge, empirical facts and analysis.

abstract: The purpose of this study was to investigate the Feasibility of Using a Non-Counter Movement Squat to Assess Lower Body Strength in Adults ages 20-70 years. Feasibility was tested by measuring five feasibility metrics described by Bowen et al. (Bowen et al., 2009): Acceptability, Demand, Implementation, Practicality, and Limited Efficacy. Seven male subjects and fifteen female subjects participated in the study. The subjects had their height, weight, body fat percentage by bioelectrical impedance analysis (BIA), and grip strength measured. Subjects performed a warm-up on a cycle ergometer, a Non-Counter Movement Squat Test (NCMST) 1-repetition maximal strength test using a Smith machine, and a cool down on a treadmill. Each subject then completed a post-participation questionnaire used to measure acceptability, Demand was measured by subjects who agreed to participate, implementation was measured by subjects who completed the protocol, practicality was measured by an administrator survey, and limited efficacy was measured by distribution of strength results by age and for all subjects by sex. Results showed acceptance of hypotheses of acceptability, demand, implementation and practicality for both males and females. Limited efficacy was inconclusive for both males and females resulting in rejection of hypothesis. The findings of this study show that further research is needed to compare the NCMST to other lower body muscular strength tests to determine the validity of the NCMST. / Dissertation/Thesis / Masters Thesis Healthcare Innovation 2019

The diploma thesis deals with the matter of business in construction. It focuses on the business intention, business plan, or feasibility study and describes the differences between them. It theoretically defines when, under which circumstances and for what reasons it is appropriate to create a business plan for the intended purpose. It also includes a description of the individual parts of the business plan. The practical part of the thesis deals with the specification of the business plan in the problematic of processing bids for construction work in public and private tenders, for which this real business plan is created, with an evaluation of whether and under what conditions this plan could be implemented.

The purpose of this study was to evaluate the feasibility of a prenatal and postnatal nutrition and lactation consulting facility in either of two locations in the Tidewater region of Virginia, Virginia Beach or Williamsburg. Experts in nutrition and lactation, a registered dietitian and licensed lactation consultant, would be the ideal means of providing adequate nutritional and lactation advice for the mother and infant to foster healthy, optimal pregnancy outcomes and lactation success. A web-based search for adequate data on the demographic sketches of the two cities was done to develop an understanding of meeting the needs of the target population for this type of facility. Women of higher socioeconomic status, higher education level, and with emotional support from spouse/family were targeted. This study will act as the initial step in conducting further research in development of a business plan for a potential facility.

Выпускная квалификационная работа (магистерская диссертация) посвящена исследованию оценке эффективности и финансовому обоснованию политики повышения конкурентоспособности промышленной компании. Предметом исследования выступают финансово-экономические отношения по поводу обеспечения конкурентоспособности производственной организации. Основная цель магистерской диссертации состоит в развитии теоретических и методических установок по оценке конкурентоспособности производственной компании, проведения анализа хозяйственной деятельности компании, предложить дополнение к существующим методам оценки конкурентоспособности. В заключении обозначены рекомендации по повышению конкурентоспособности для объекта исследования. / Final qualifying work (master's thesis) is devoted to the study of efficiency evaluation and financial justification of the policy of increasing the competitiveness of an industrial company. The subject of the study are the financial and economic relations on the competitiveness of the production organization. The main purpose of the master's thesis is to develop theoretical and methodological guidelines for assessing the competitiveness of the production company, the analysis of economic activity of the company, to offer an addition to the existing methods of assessing competitiveness. In conclusion, the recommendations to improve the competitiveness of the object of study.

No description available.

Behövs en förstudie innan man sjösätter ett nytt projekt som ska förändra ett företags arbetssätt eller effektivisera en verksamhet? Rapporten beskriver effekterna av att göra en förstudie innan ett projekt påbörjas, som kan innebära stora förändringar i ett företags verksamhet. Förstudien har en stor betydelse, inte minst för att den gör det möjligt att avbryta ett projekt i ett tidigt skede, om man upptäcker att det inte är ekonomiskt fördelaktigt för företaget att genomföra det. En slutsats vi drar är att de agila projektmodellerna underlättar hanteringen av förändringar som uppstår under projektets gång samt gör projektet mer anpassningsbart till de resultat som framkommer under projektets gång.Rapporten tar upp för- och nackdelar med olika projektmetoder och affärssystem. I rapporten intervjuas ett antal mycket erfarna och kompetenta personer, som tillsammans har över 100 års projektvana och som har implementerat 100-tals projekt. Deras erfarenheter och synpunkter ligger till grund för slutsatser och analyser i rapporten. Dessutom har vetenskapliga litteraturstudier kompletterat intervjuerna för att ge en heltäckande bild av frågorna om förstudier, affärssystem och deras roller i olika sammanhang. / Is a feasibility study necessary before launching a new project that will change a company’s work processes and efficiency? This report describes the impact of making a feasibility study before project initiates, which can mean big changes in a company’s operations. The feasibility study is of great importance, not at least because it makes it possible to cancel a project at an early stage if you discover that it is not economically advantageous for the company to implement it. This report discusses the pros and cons of different project methods and ERP-systems. The report interviewed a number of very experienced and competent persons, who together have over 100 years of project experience and which have been involved in above 100 projects. Their views and experiences form the basis for conclusions and analyses in the report. In addition, the scientific literature studies supplemented the interviews to give a comprehensive picture of the issues of feasibility studies, ERP-systems and their roles in different contexts.

<p>There is no standard format for posting blog entries, which results in many different web feed formats and APIs being used. This thesis work addresses the problem by determining the feasibility of the development of a plug-in based architecture, used in a mobile blogging application compatible with multiple service providers.</p><p>During the study, a definition of what a feasible architecture would be was made based on requirements set by the stakeholders. Six models that complied with this definition were designed and compared. One of them was selected for prototyping. The prototyping phase was intended to test if the architecture could be implemented in a mobile environment. The study revealed that it is feasible to develop a plug-in based architecture to solve the problem, although with some limitations due to the dependency of libraries for streaming XML transformations not yet implemented in J2ME.</p> / <p>Det finns inget standardformat för att posta ett blogginlägg, vilket resulterar i att många olika web feed-format och APIer används. Det här examensarbetet angriper problemet genom att undersöka om det är genomförbart att utveckla</p><p>en plug-inbaserad arkitektur för en applikation till mobiltelefoner, som är kompatibel med flera olika bloggtjänster.</p><p>Under studiens gång definierade vi vad termen genomförbart skulle innebära, baserat på krav från olika intressenter. Sex modeller som uppfyllde definitionen utvecklades och jämfördes. En av dessa valdes ut för att användas som grund</p><p>för en prototyp. Prototypfasen avsåg att bevisa om arkitekturen kunde implementeras i en mobil miljö. Studien visade att det är genomförbart att utveckla en plug-inbaserad arkitektur för att lösa problemet, dock med några begränsningar på grund av beroende av bibliotek för strömmande XMLtransformationer som ännu inte implementerats i J2ME.</p>

Master of Science / Department of Electrical and Computer Engineering / Anil Pahwa / Energy costs are rising, supplies of fossil fuels are diminishing, and environmental concerns surrounding power generation in the United States are at an all-time high. The United States is continuing to push all states for energy reform and where better for Kansas to look than wind energy? Kansas is second among all states in wind generation potential; however, the best wind generation sites are located predominantly in sparsely populated areas, creating energy transportation problems. Due to these issues interest in community wind projects has been increasing. To determine the economic potential of community wind generation a distribution system in rural western Kansas where interest in community wind exists was examined and a feasibility study based on historical data, economic factors, and current grid constraints was performed. Since the majority of the load in this area is from pivot-point irrigation systems, load distributions were created based on temperature ranges instead of a linear progression of concurrent days. To test the economic viability three rate structures were examined: flat energy rate, demand rate, and critical peak pricing. A Monte Carlo simulation was designed and run to simulate twenty-year periods based on the available historical data; twenty-year net present worth calculations were performed to ensure economic viability. A sensitivity analysis was then performed to examine the effects of change in turbine size and energy rate scale. Finally, an energy storage analysis was performed to examine the economic viability of various sizes of battery storage systems.

[pt] A degradação do meio ambiente está no topo da agenda de países e empresas. O foco principal é a redução das emissões de gases causadores do efeito estufa, sendo CO2 o maior contribuinte. O consumo elevado de combustíveis fósseis está criando um efeito irreversível no planeta. De forma a contrabalancear seus impactos ambientais, surge o segmento de projetos de captura e sequestro de carbono. O maior entrave seu para crescimento é econômico, daí o uso de CO2 para recuperação avançada de óleo, alavancando sua implementação. Esta dissertação avalia duas estratégias distintas de desenvolvimento de um campo de petróleo offshore, uma através da injeção de água e outra por recuperação avançada com injeção de CO2 (EOR CO2 – enhanced oil recovery) a partir de fonte antropogência. Os maiores desafios técnicos para aplicação de EOR CO2 em ambiente offshore são examinados, mostrando o arcabouço teórico, melhores práticas e soluções ainda não desenvolvidas, em áreas como: gerenciamento de reservatórios, engenharia de poços e plantas de processo, além de captura e transporte de CO2. Em seguida, a viabilidade econômica de ambos os métodos de recuperação são comparados, com pequena vantagem o caso EOR. Entretanto, devido às incertezas de sucesso do método e sua sensibilidade ao preço de importação de CO2, a gama de resultados pode alterar o processo decisório. Um balanço de carbono também é realizado, mostrando a redução esperada de sua concentração na atmosfera ao se selecionar o método de EOR CO2. Ainda, a aplicabilidade de créditos de carbono é discutida, e seu impacto econômico quantificado. Finalmente, há um longo caminho a se percorrer para ampla utilização de projetos EOR com CO2 antropogênico em ambiente offshore. Ao apontar os maiores desafios e entraves a serem superados, incluindo técnicos, comerciais e regulatórios, ao apresentar modelo econômico, e acima de tudo, ao mostrar sua atratividade, esta dissertação tem por objetivo reduzir esta distância. / [en] Environmental issues are on top of governments and companies’ agendas. The main focus is on global warming and means to reduce greenhouse gases, being carbon dioxide the main contributor. The consumption of fossil fuels is creating an irreversible effect on the planet, and it is expected to continue for years to come. In order to offset its usage are the emerging carbon capture and storage (CCS) projects. Their main obstacle is economical, and that’s where enhanced oil recovery through CO2 can help. This dissertation assesses the development options of an offshore Brazilian discovery, by comparing water injection method with carbon dioxide enhanced oil recovery (EOR CO2) imported from an anthropogenic onshore source. The main EOR CO2 technical challenges for offshore application are examined, detailing field proven and yet to be developed solutions, from reservoir management, wells engineering to the production unit, passing through CO2 acquisition and transportation. Next, economical feasibility of both methods are compared, with a slight advantage for EOR on the base case. Nevertheless, due to high uncertainties in method success prior to development and commitment, and also to carbon dioxide import prices, the range of results can shift the decision making, and such sensitivity analysis is also presented. A carbon inventory is also made, showing the net positive balance of selecting EOR CO2, which reduces the component’s concentration in the atmosphere. Finally, the applicability of carbon credits is discussed and its economical impact quantified. There is still a long way to go for the widespread utilization of anthropogenic EOR CO2 in offshore projects. By pointing out the main challenges to be addressed, including technical, commercial and regulatory, by presenting an economical model comprising environmental aspects, and most of all, showing its attractiveness, this dissertation aims to reduce this gap.