我國綜合券商近年來因為整體家數過多、全球景氣持續衰退、金控時代來臨等因素影響下，使得整體產業經營出現困難，極待政府與民間共思一個解決方案。為此，財政部與證期會共同協助我國綜合券商的轉型升級，希望透過政府相關法令政策的開放解套，推動獨立綜合券商轉型為投資銀行，解決目前綜合券商在經營上所面臨之困境。 本研究針對我國綜合券商轉型投資銀行的相關政策，進行可行性研究與個案分析，並以國外知名投資銀行成功案例進行個案分析，從中探討投資銀行產業的成功關鍵因素，以做為我國綜合券商轉型投資銀行的策略擬定依據。 根據本研究成果，提出以下幾點結論： 1.台灣綜合券商面臨生存與轉型之壓力 2.我國整體投資環境確實有發展投資銀行可能性存在 3.產品創新、資本規模、品牌知名度及全球佈局能力仍是關鍵 4.各券商必須依據自身核心優勢差異發展不同之轉型策略 5.政府法令開放程度影響投資銀行發展 除此之外，本研究亦提出以下幾點建議： 1.對政府與相關主管單位建議：(1)法令開放持續推動；(2)建立有效監理機制；(3)大陸市場審慎評估。 2.對整體證券產業建議：(1)適度整合市場競爭狀況；(2)提供建議與政府合作。 3.對於個案公司建議：建議個案公司仔細思考目前所面臨轉型挑戰，以及相關解決辦法，透過本身核心優勢維持與發揮，逐步轉型投資銀行以因應我國金融產業轉型與升級。

J'ai étudié deux nouvelles configurations de double-colonne pour distillation hétéroazéotropique. Ces configurations sont appropriées à la récupération simultanée des composants des mélanges binaires hétéroazéotropiques et homoazéotropiques (en utilisant un tiers corps (entraîneur)). Elle sont opérées en système fermé, c'est-à-dire, il n'y a pas de soutirage de produit continu. D'abord, en appliquant un modèle simplifié, j'ai étudié la faisabilité de la séparation d'un mélange hétéroazéotropique (1-butanol – eau), puis celle d'un mélange homoazéotropique (2-propanol – eau) aidé par entraîneur benzène ou cyclohexane, en utilisant le SDC. Puis, j'ai étudié cette configuration par modélisation rigoureuse, en appliquant le simulateur dynamique du logiciel professionnel ChemCAD (CC-DColumn). J'ai comparé la nouvelle configuration avec le RD, sur la base des résultats obtenus par toutes les deux méthodes d'étude. Le SDC s'est avéré faisable et compétitif avec le RD : pendant la même durée ou plus courte, les rendements des composants ont été plus élevés. Puis, on a étendu le SDC à un système plus flexible (système de double-colonne généralisé, SDCG) qui est approprié à la séparation des mélanges binaires homoazéotropiques aidé par entraîneur (en le cas présent : cyclohexane ou n-hexane). J'ai étendu la méthode de faisabilité aussi à l'étude de cette configuration. Le SDCG s'est avéré aussi faisable. En appliquant modélisation rigoureuse, j'ai étudié les effets des nouveaux paramètres opératoires sur la durée, et j'ai comparé le DCG avec le SDC. Le SDCG s'est avéré encore plus avantageux que le SDC : la durée a été plus courte, et les besoins spécifiques d'énergie des produits ont été plus bas. J'ai étudié le SDC et le SDCG aussi par des manipulations exécutées sur installations de taille laboratoire et pilote. D'abord, j'ai fait des manipulations laboratoires pour la séparation du mélange binaire hétéroazéotropique, en utilisant une installation en verre qui a été opérée aussi comme RD et SDC. Le SDC s'est avéré faisable et compétitif avec le RD aussi sur la base des résultats de ces manipulations : pendant la même durée, les rendements des tous les deux composants ont été plus élevés. Puis, en utilisant l'installation pilote comme SDC, j'ai étudié la séparation ci-dessus. Après cette manipulation, j'ai étudié la séparation du mélange binaire homoazéotropique en appliquant n-hexane comme entraîneur, en opérant le système comme RD et SDCG. La manipulation faite avec le SDCG a montré que la production simultanée de deux composants est faisable avec cette configuration. / Distillation is the method the most frequently applied for the separation of liquid mixtures, e.g. for the recovery of the components of the waste solvent mixtures. Because of the high energy demand of these processes the optimal design and operation of the distillation equipments are important from economic and also environmental points of view. The separation of the azeotropic mixtures needs special distillation methods like heteroazeotropic distillation. In the pharmaceutical and fine chemical industries it is often applied in batch mode. The aims of the thesis are to study the feasibility of a new Double-Column System (DCS) for batch heteroazeotropic distillation and to compare it with the traditional Batch Rectifier (BR) equipped with a decanterto study the above configurations by rigorous simulationto extend the DCS (Generalised Double-Column System, GDCS) and to study this new configuration by the above methodsto do laboratory experiments for both configurations in order to prove the feasibility of the separation and validate the calculations, respectively. Two new double-column configurations for batch heteroazeotropic distillation were studied. These configurations are designed to produce simultaneously the components of binary heteroazeotropic and homoazeotropic mixtures (by using an entrainer). They are operated in closed system (without continuous product withdrawal). First the feasibility of the separation of a heteroazeotropic mixture (1-butanol – water) and that of a homoazeotropic one by using an entrainer (isopropanol – water + benzene or cyclohexane) in the DCS were investigated by a simplified model. Then the operation of this configuration was modelled by rigorous simulation by using the dynamic simulator of the professional flowsheet simulator ChemCAD (CC-DColumn). On the basis of the results obtained by both methods the new configuration was compared with the BR. The DCS proved to be feasible and competitive with the BR: during the same or shorter time the recoveries of the components were higher. Then the DCS was extended to a more flexible version (Generalised Double-Column System, GDCS), which is suitable for the separation of binary homoazeotropic mixtures (by using an entrainer, in this work: cyclohexane or n- exane). The feasibility method was extended for the study of this configuration, as well. The GDCS proved to be feasible. Then the effects of its additional operational parameters on the duration were studied by rigorous simulation. The GDCS was compared with the DCS by rigorous simulation, as well. The GDCS proved to be more advantageous than the DCS: the duration was shorter and the specific energy demands of the products were lower. The DCS and GDCS were also investigated by laboratory and pilot plant experiments. First laboratory experiments were done for the separation of the binary heteroazeotropic mixture in a simple small size glass equipment operated as BR and DCS. The DCS proved to be feasible and competitive with the BR also on the basis of the results of these experiments: during the same time the recovery of both components were higher. Then a pilot plant was used for the same separation as a DCS. After this experiment the separation of the binary homoazeotropic mixture by using n-hexane as entrainer was studied in the equipment operated as BR and GDCS. The experiment showed that the simultaneous production of two components is feasible also in the GDCS.

The graduation thesis deals with the evaluation of the individual entrepreneur's business plan. To decide whether a project is accepted or not, was drawn up a detailed business plan, sometimes referred to as a feasibility study. The theoretical part discusses the purpose of the business plan, elaborates on the basic essentials of the business plan, the form and the principles of treatment. Based on a synthesis of findings from the literature the author further elaborates on some of the tools of managerial and economic practises and their applicability in the business plan. The aim of the theoretical part is inter alia to provide guidance to anyone who is processing the business plan without necessity of studying comprehensive literature. The practical part already specifically deals with author's business plan. On its basis it should be possible to decide whether to implement the plan. It is specific narrowly focused Internet project. The methods used to evaluate the project revealed the potential of the project and simultaneously pointed out to the potential risks. The entire business plan then finds the image in the used modern approach to the evaluation of investment projects -- the Monte Carlo simulation.

This dissertation titled Content management systems and their implementation focuses in its theoretical part on the terms content and content management. Then it defines particular types of content management systems and their functions, both the general ones and the specific ones for particular types of systems. It also focuses on the using of particular terms in the field of content management systems and it defines some differences in their interpretation. In the theoretical part it also describes how the organization applying the project approach to implementing of content management systems as from requirements setting through the selection criteria for comparing and selecting the appropriate system. The output of the practical part is the selection of suitable web content management system for Vyšší odborná škola a Obchodní akademie Chotěboř. The practical part is an analysis of requirements, determination of appropriate criteria for the selection system, a comparison of systems based on these criteria, cost-benefit analysis and feasibility study.

The thesis explains the formation of the PPP project feasibility study as an essential document in the preparatory phase of the project lifecycle. Its closer focus is on the economic evaluation of the investment project implementation using the PPP compared to the implementation using public procurement. The practical part refers to a specific example of calculating of the public sector comparator that is compared with the referential project and a value of money is determined as an indicator of profitability of both forms of implementation.

The thesis deals with evaluation of finances drawing in operational programmes, especially in regional ones, and provides also description of project documentation that is needed to get a subsidy from regional operational programme. The diploma paper comprises basic data about regional policy of the European Union and about implementation of this policy in the Czech Republic. The thesis carries on with the system of operational programmes in the Czech Republic, gives insight into regional operational programmes and analyses the state of finances drawing. Last part focuses on project preparing for getting a subsidy from structural funds, especially on feasibility study and project application.

The controlled anaerobic digestion of organic waste in a biogas facility aggregates advantages of waste treatment, energy recovery and nutrient recycling and is a promising technology to deal with contemporary issues of waste management and energy recovery. Small-scale biogas production units can be simply designed and successfully operated even in settings where means for advanced technology equipment are low and institutional capacities limited. In the country of Lebanon, landfilling and open dumping of solid waste is common practice and anaerobic treatment of waste is applied only sporadically and hence, not well-established. The aim of this study was to assess the feasibility of small-scale biogas production using organic waste, explore options for its application and propose a business model on how feedstock sourcing, facility operation and end product utilization could be realized in the research area. Research area was Ghazir village, a community within the urbanized coastal area in Lebanon. Methods were of both quantitative and qualitative nature.A techno-economic assessment served to quantify biogas and liquid digestate production rates, based on available resources of organic waste in the research area. Costs associated with installation, operation and maintenance of the proposed facility have been projected based on present examples of similar facilities in the country. Interviews with local stakeholders and a questionnaire survey among residents in the area of research allowed to identify suitable end use options for the produced biogas and served to explore communal acceptance of local biogas production. Results show that the produced biogas can be used for thermal feedstock treatment to supply local farmers with a fertilizer alternative, i.e. the liquid digestate. Organic waste that is subject to the anaerobic treatment in a digester can be provided by multiple point sources, i.e. households and a local food market in the form of source-sorted kitchen waste and unsold fruits and vegetables, respectively. Due to the current unfamiliarity with anaerobic treatment of organic waste in the research area, tests on the effects on crop yields are advised to take place before implementation of the proposed business model, as its communal benefits hinge on the suitability of the liquid digestate as a fertilizer. Economic calculations show low investment costs for the proposed facility as well as acceptable annual revenues in case the liquid digestate proves to be of interest for commercial acquisition by local farmers. The used methods and strategies in this feasibility assessment, i.e. waste quantification, yield and cost calculations, stakeholder interviews and questionnaire survey allow for replication of the taken investigation to eventually initiate small-scale biogas production using organic waste in other settings with similar conditions.

Purpose: Prescription and illicit opioid abuse have disproportionately impacted the Central Appalachian Region. Centers for Disease Control and Prevention (CDC) data indicate the region is home to many of the 220 counties most vulnerable to rapid dissemination of Hepatitis C Virus (HCV) and HIV related to injection drug use. Growing evidence supports the role of community pharmacies in HCV/HIV prevention by providing access to non-prescription sterile syringes; however, research has largely been confined to major metropolitan areas. The objective of this study is to evaluate the feasibility of community pharmacies in Central Appalachia serving as access points for sterile syringes. Methods: This study was approved by the Institutional Review Board. Using state directories of health professionals, community pharmacists from Northeast Tennessee, Western North Carolina, and Southwest Virginia were randomly selected to participate in key informant interviews to inform understanding of the impact of attitudes, beliefs, and state-level policies on pharmacists’ syringe dispensing behaviors (N=15). Informed consent was obtained prior to initiating the interviews and participants were provided modest compensation for their time. The semi-structured interviews were guided by Theory of Planned Behavior constructs to focus the interview on evidence-based predictors of behaviors. Interviews were audio-recorded, de-identified, transcribed, and are currently being thematically analyzed by the research team with NVivo software. The results of this study are expected to inform development of a survey instrument for a larger quantitative evaluation of pharmacists' perceptions on syringe dispensing in the region. Results: Not applicableConclusion: Not applicable

<p>Kunskapsöverföring är en nödvändig förutsättning för att säkerställa organisationers existens och framåtskridande. Utgångspunkt för denna uppsats är förstudiens roll i mjukvaruprojekt och dess betydelse för den fortsatta systemutvecklingsprocessen. Fokus liggerpå kunskap som genereras under förstudien, samt hur och i vilken omfattning kunskapen förs vidare till analysfasen i systemutvecklingsprocessen. </p><p>Resultatet visar att förstudien utgör ett viktigt beslutsunderlag och är en nödvändig förutsättning för att gå vidare i systemutvecklingsprocessen. Kunskapsöverföring genom dokumentation och via muntliga föredragningar är otillräcklig, eftersom det finns ett ”filter” som innebär att erfarenhetsbaserad kunskap inte överförs mellan förstudie och analys via dokument eller via muntliga föredragningar. Därför måste personer som deltar i förstudien finnas med senare i utvecklingsprocessen, för att artikulera den ”tysta” erfarenhetsbaserade kunskapen till explicita former. </p><p>Vi drar slutsatserna att kunskapsöverföring via dokument är bra, men räcker inte enligt vår mening. Då det mesta av kunskapen är implicit, det vill säga tyst och/eller ordlös, kommer den inte med i en skriftlig rapport. Kompletteras rapporten med muntliga föredragningar, kommer man ytterligare ett steg närmare en optimal kunskapsöverföring, men det räcker fortfarande inte, då den tysta kunskapen alltjämt utgör ett hinder. Kunskapsöverföring måste ske genom personer, som finns med både i förstudie- och analysfasen, men det måste tillskapas arenor för kunskapsomvandling och kommunikation. Genom en arena för kunskapsomvandling kan den tysta kunskapen göras kommunicerbar. En arena för kommunikation utgör sen den sista byggstenen på väg mot en effektiv kunskapsöverföring. Kunskapsöverföring måste "organiseras". Vi lämnar därför ett förslag till en kunskapsöverföringsmodell. </p> / <p>Knowledge transfer is necessary condition to guarantee the existence and progress of organisations. The starting-point for this paper is the role of the feasibility study in a software project and it’s significance for the subsequent system development process. The focus is on knowledge, which is generated under the feasibility study, and how and in which dimension knowledge is bringing on to the analysis in the system development process. </p><p>The result shows that the feasibility study is an important base of decision and a necessary condition of the future system development process. Knowledge transfer by documentation and by oral presentation of reports is insufficient, because there is a"filter"which means that knowledge of experience not will be transferred between feasibility study and analysis by documentation and by oral presentation. Furthermore must persons who are involved in the feasibility study occur even later in the development process, to articulate the "silence" knowledge of experience into explicit forms. </p><p>We draw the conclusions that knowledge transfer by documents is good, but not enough in our opinion. Because most of the knowledge is implicit, which means silent and/or without words, it will not been in the report. If the report will be completed with oral presentations, you will came further one step near an optimal knowledge transfer, but it’s still not enough, because the silent knowledge still is an obstruction. Knowledge transfer must be done by persons, who’s in both the feasibility study and analysis, but there must be an arena for knowledge transformation and communication. Through an arena for knowledge transformation the silent knowledge can be communicative. An arena for communication is then the last stone of building an effective knowledge transfer. Knowledge transfer must be "organised". We therefore present a proposal to a model of knowledge transfer.</p>

No description available.