Loin de disparaître dans le cadre de la mondialisation des échanges, les frontières de l’Union indienne s’effacent devant certains flux pour se manifester vivement devant les flux jugés indésirables. Parallèlement au renforcement des contrôles des passages transfrontaliers, trois des six dyades de l’Union indienne font l’objet d’une teichopolitique, c’est-à-dire de la construction d’une barrière frontalière. Ces trois barrières ont pour objectif de réorienter tous les flux vers des points de passage où un tri est effectué entre les flux qui peuvent entrer sur le territoire et ceux qu’il convient de refouler. Les flux sont ainsi hiérarchisés en fonction de leur degré de désirabilité. Ils sont alors traités de manière différentielle en fonction des risques qu’ils représentent pour la sécurité de la société indienne. Les principaux flux indésirables sont les migrations clandestines, les trafics illicites et illégaux et les mouvements d’activistes dont les projets vont à l’encontre des intérêts indiens. L’hypothèse principale de cette thèse est que les trois barrières frontalières érigées par le gouvernement indien depuis le début des années 2000 sont des dispositifs biopolitiques dans la mesure où leur objectif est de filtrer les flux pour empêcher les entrées indésirables sur le territoire indien. Bien plus, ces barrières sont les manifestations de la radicalisation contemporaine du biopouvoir indien. L’objectif de cette thèse est d’appliquer une réflexion biopolitique à l’analyse des barrières frontalières indiennes et de poser les bases d’un système explicatif de ces phénomènes. Cette recherche a été initiée afin de mieux appréhender la théorisation de ces objets géographiques et géopolitiques. / Far from disappearing in the era of globalization, Indian Union borders are no longer policed against some immigration flows; conversely, they have been tightened against other unwelcome flows. In parallel with the reinforcement of cross-border flow controls, three of the six Indian land borders have been subjected to teichopolitics, that is to say the erection of border barriers. The aim of these border barriers is to redirect all the cross-border flows towards checkpoints, where they are sorted into different groups, namely those that are allowed in and those that are to be rejected. Thus prioritized in terms of social desirability, they are dealt with according to the risks they represent for Indian society. The main unwelcome flows are induced by clandestine migrants, traffickers and activists, whose plans can run counter to Indian interests. The main hypothesis of this research is that the three border barriers created by the Indian government since the beginning of the millenium are biopolitical devices. Indeed, their objective is to filter cross-border flows to prevent the unwelcome from entering the Indian territory. Moreover, these barriers manifest the contemporary radicalisation of Indian biopower. The aim of this thesis is to apply a biopolitical approach to the analysis of Indian border barriers and to propose an explanatory system for the understanding of this geopolitical phenomenon. This research was initiated in order to evolve a theory concerning these geographical and geopolitical factors.

The purpose of this thesis was to investigate how potentials of Real-Time Location Systems (RTLS) in relation to Just In Time (JIT) management could be utilized within logistics management. For this, a framework, based on previous research of the interrelations of RTLS and JIT management, is proposed, to assess the effects of RTLS on logistics management, both on a managerial - as well as on an operational level. To answer the proposed research questions, the study followed a deductive and exploratory case study design, which was conducted at a company within the automotive industry. To understand the challenges within logistics management at the case company, interviews, observations, analysis of internal documents and a focus group were used, which allowed for a triangulation of the captured information. The findings and analysis of the data show that on an operational level the challenges within logistics management are related to complex logistic structures, pull strategies with partial push material flows, lack of information and – reliable data, as well as processes reliant on individuals. On the managerial level the findings suggest challenges related to high complexity and space constraints, time constraints, lack of transparency and – data connections, the company's improvement focus, employee attitude and a lack of reliable data. When the challenges were evaluated in relation to the proposed framework, it shows that these challenges would be resolved or counteracted by the benefits RTLS could provide in relation to JIT management. This study thereby supports the positive correlation between RTLS’s potential and JIT in logistics management.

<div>Two-phase flow and heat transfer has a wide variety of applications ranging from nuclear power plants to computer chip cooling. The efficient designs of these systems require a clear understanding of the mechanisms by which two-phase flows enhance heat transfer. With the rapid growth in computing power, Computational Fluid Dynamics is becoming an increasingly reliable predictive tool to understand the physics underlying two-phase flow and heat transfer. We identify the two chief phenomena</div><div>affecting heat transfer in two-phase flows as being the improved convective effect in bubbly flows, and the phase change phenomenon. We examine three key aspects of</div><div>bubbly flows in the present work namely: a) The flow of bubbles near vertical walls, b) the heat transfer associated with a non-condensable bubble rising near a vertical wall, and c) the heat transfer associated with boiling and condensation involving bubbles.</div><div><br></div><div>The first part involves studying the rise velocity of a layer of bubbles rising near a vertical wall. We derive a scaling between the rise velocity based Reynold’s number and the Archimedes number. The second part involves examining the flow pattern around a single bubble rising under the buoyancy effect in a shear flow near a heated wall, and how it affects the heat transfer from the wall. We study the dependence of the fractional improvement in Nusselt number at the wall on various non-dimensional parameters such as the Archimedes number, the Laplace number and the shear rate. Our study shows the existence of an optimum dimensionless shear rate for heat transfer enhancement and a strong dependence between the flow pattern around the bubble and its associated heat transfer enhancement. The third part involves building a numerical model to study flow boiling in micro-channels. We validate the proposed model with two benchmark problems and two experimental studies. The validated numerical tool is then used to understand the effect of varying the micro-channel inlet flow rate on its heat transfer characteristics. This numerical tool is further developed to include a stagnant micro-layer model that can simulate nucleate boiling. We then use it to study the flow boiling characteristics of a line of bubbles undergoing boiling and lift-off in a shear flow. In the end, based on existing literature in the field, we propose future tasks to be undertaken in the area of numerical two-phase flow.<br></div><div><br></div>

​ Nombreuses stratégies de contrôle ont été récemment proposées par la communauté scientifique afin depouvoir réduire la traînée dans les écoulements pariétaux. Entre autres, les Surfaces Superhydrophobes (SHS) ontmontré leurs capacités de pouvoir réduire considérablement le frottement pariétal d’un écoulement liquide grâce à laprésence de microbulles de gaz piégées dans les nano-rugosités de la surface. Dans des conditions géométrique etthermodynamique données pour lesquelles la transition de mouillage est évitée (condition pour laquelle normalementla taille des rugosités qui caractérise la SHS est de plusieurs ordres de grandeur plus petite que l'échellecaractéristique de l'écoulement principal), on peut atteindre ce qu’on appelle ‘l'effet Lotus’, pour lequel l'écoulementglisse à la paroi, avec une vitesse différente de zéro.. Dans ce cadre, nous nous sommes proposés d’étudier, à l’aidede simulations numériques l’influence des SHS sur la transition laminaire-turbulent dans un écoulement de canal.Pour cela, nous avons réalisé une série de simulations numériques directes (DNS), allant de l'état laminaire au casturbulent pleinement développé, en traitant la plupart de scénarios de transition connu en littérature. Des analyses destabilité locale et globale ont aussi été réalisées afin de déterminer l’influence de ces surfaces sur la première phasedu processus de transition. Bien que la procédure de déclenchement de la transition contrôlée (type K, H, C,...) soitbien décrite dans la littérature, cela n’est pas le cas pour les transitions naturelles. À cette fin, une nouvelle méthode aété développée pour déclencher puis étudier la transition naturelle dans des écoulements de type canal. Cette méthodeest basée sur des mécanismes de réceptivité de l'écoulement (resolvent global) permettant de construire un forçagevolumique spécifique. Plusieurs approches pour modéliser les SHS ont été utilisées, de complexités croissantes, touten tenant en compte des caractéristiques physiques de ces surfaces. Dans un premier temps, une condition deglissement homogène a été utilisée et son influence analysée. Chaque rugosité a été ensuite discrétisée spatialement,d’abord avec une alternance de condition limite sur une surface plate, ensuite en tenant compte de la dynamique del’interface gaz-liquide par une méthode Lagrangienne-Eulerienne Arbitraire (ALE). Nous avons montré que les SHSpermettent d’efficacement retarder les transitions contrôlées mais qu’en revanche elles ont peu d’influence sur lestransitions naturelles (développant des stries de vitesse). En effet, ce comportement dérive de l'équilibre entre deuxeffets contradictoires. D’un côté, le glissement pariétal nuit au développement des structures cohérentes de typehairpin ​ , en altérant le processus de ​ vortex stretching-tilting ​ . D’autre part, le mouvement de l’interface gaz-liquideinteragit avec les structures cohérentes de l'écoulement, en produisant des vitesses normales à la paroi favorisantdavantage le processus de ​ sweep-ejection et entraînant le développement de structures en forme d’arche. Nous avonsmontré que les interfaces gaz-liquide statiques retardent la transition de façon analogue à une condition aux limiteshomogène (si l’hétérogénéité pariétale est petite). En revanche la prise en compte de leur dynamique limite le retardde la transition, montrant l’importance du modèle de SHS dans les écoulements transitionnels. / Many passive control strategies have been recently proposed for reducing drag in wall-bounded shearflows. Among them, underwater SuperHydrophobic Surfaces (SHS) have proven to be capable of dramaticallyreducing the skin friction of a liquid flowing on top of them, due to the presence of gas bubbles trapped within thesurface nano-sculptures. In specific geometrical and thermodynamical conditions for which wetting transition isavoided (in particular, when the roughness elements characterizing the SHS are several orders of magnitude smallerthan the overlying flow), the so-called ’Lotus effect’ is achieved, for which the flow appears to slip on the surfacewith a non zero velocity. In this framework, we propose to study, by means of numerical simulations, the influence ofSHS on laminar-turbulent transition in a channel flow. To do so we have performed a series of direct numericalsimulations (DNS), from the laminar to the fully turbulent state, covering the majority of transition scenarios knownin the literature, as well as local and global stability analysis so to determine the influence of SHS onto the initialstages of the process. While the conditions for observing controlled K-type transition in a temporal channel flow arewell defined, this is not the case for uncontrolled ones. To this end, a novel theoretical numerical framework has beendeveloped so to enable the observation of natural transition in wall-bounded flows. This method, similarly to theFree-Stream-Turbulence framework available for the boundary layer flow, is capable of triggering uncontrolledtransition t​ hrough flow receptivity to a purpose-built forcing. Different surface modellings for the superhydrophobicsurfaces are tested. First, homogeneous slip conditions are used. Then, the spatial heterogeneity of the SHS has beenconsidered by modelling it as a flat surface with alternating slip no-slip boundary conditions. Finally, the dynamics ofeach microscopic liquid-gas free-surface has been taken into account by means of a fully coupled fluid-structuresolver, using an Arbitrary Lagrangian Eulerian formulation. We show that while SHS are ineffective in controllingtransition in noisy environment​ , they can strongly delay transition to turbulence for the K-type scenario​ . Thisbehaviour results from the balance of two opposing effects. On one hand slippery surfaces inhibit the development ofcharacteristic hairpin vortices by altering the vortex stretching-tilting process. On the other hand, the movement ofthe gas-liquid free-surfaces interacts with the overlying coherent structures, producing wall-normal velocities thatenhance the sweep-ejection process, leading to a rapid formation of hairpin-like head vortices. Thus, whenconsidering flat interfaces transition time is strongly increased, while taking into account the interface dynamicsinduces smaller changes with respect to the no-slip case, indicating the need for an appropriate modelling of SHS fortransition delay purposes.

<div>A strongly implicit, nonlinear Crank-Nicolson-based finite-difference scheme was constructed for the numerical study of the self-similar behavior of viscous gravity currents. Viscous gravity currents are low Reynolds number flow phenomena in which a dense, viscous fluid displaces a lighter (usually immiscible) fluid. Under the lubrication approximation, the mathematical description of the spreading of these fluids is reduced to solving a nonlinear parabolic partial differential equation for the shape of the fluid interface. This thesis focuses on the finite-speed propagation of a power-law non-Newtonian current in a variable width channel-like geometry (a "Hele-Shaw cell'') subject to a given mass conservation/balance constraint. The proposed numerical scheme was implemented on a uniform but staggered grid. It is shown to be strongly stable, while possessing formal truncation error that is of second-order in space and it time. The accuracy of the scheme was verified by benchmarking it against established analytical solutions, which were obtained via a first-kind self-similarity transformation. A series of numerical simulations confirmed that the proposed scheme accurately respects the mass conservation/balance constraint. Next, the numerical scheme was used to study the second-kind self-similar behaviour of Newtonian viscous gravity currents flowing towards the end of a converging channel. Second-kind self-similar transformations are not fully specified without further information from simulation or experiment. Thus, using the proposed numerical scheme, the self-similar spreading and leveling leveling of the current was definitively addressed. The numerical results showed favorable comparison with experimental data.</div>

Orientador: Romualdo Dias / Resumo: Este trabalho discute a formação de jovens e as suas relações com a cidade, a partir de encontros promovidos pela juventude em espaços públicos, em especial na cidade de Rio Claro/SP. Também promoveremos o diálogo destas experiências com outras semelhantes em diversas cidades do Estado de São Paulo que ficaram conhecidas como ‘rolezinhos’. A análise elaborada vêm do confronto dos dados recolhidos durante a presença do pesquisador com jovens em alguns territórios e acontecimentos e os discursos construídos sobre eles por outros atores sociais como a mídia, governos, instituições e autoridades, registrados em fontes documentais. A pesquisa busca traçar uma cartografia das forças que operaram na tentativa de controle do uso do espaço público e dos fluxos na cidade e a relação disso com os processos de subjetivação que, nesse caso, passam a ser marcados pela interdição do movimento do encontro com o outro, algo que chamamos de colonização do espaço do ‘entre’. / Abstract: This text discusses a youth formation and its relations with the city, from meetings promoted by youth in public spaces, especially in the city of Rio Claro/SP. We will also promote the dialogue of these experiences with other similar ones in several cities of the State of São Paulo that became known as 'rolezinhos'. The elaborated analysis comes from the comparison of the data collected during the researcher's presence with the youth in some territories and events and the speeches built on them by other social actors such as the media, governments, institutions and authorities, recorded in documentary sources. The research seeks to draw a map of the forces that operated in the attempt to control the use of public space and flows in the city and the relation of this to the processes of subjectivation that, in this case, are marked by the interdiction of the movement of the encounter with the Another, something we call the colonization of the space between. / Mestre

Ce travail expérimental s’intéresse à l’écoulement en aval d’un swirler statique court. L’induction d’un mouvement de swirl est une solution connue pour augmenter le gradient pariétal de vitesse. L’augmentation du frottement pariétal présente un intérêt industriel dans les échangeurs de chaleur pour accroître leurs potentiels de transfert de chaleur et diminuer leurs vitesses d’encrassement. Nous proposons d’approfondir la connaissance des écoulements avec swirl décroissant à faibles nombres de Reynolds pour lesquels l’intérêt énergétique est a priori plus important. Dans un premier temps, le champ d’écoulement est caractérisé à l’aide de méthodes optiques, pour identifier le type de tourbillon caractérisant le swirl. Dans un second temps, la méthode électrochimique est utilisée pour mesurer le frottement pariétal instationnaire. Par analogie, ces mesures permettent d’obtenir une première estimation du transfert de chaleur en écoulement anisotherme. / This experimental work is interested in understanding the flow downstream a short static swirler. Inducing a swirl motion is a known solution to increase the wall velocity gradient. The increase in wall shear stress is useful in industrial heat exchangers in order to enhance their heat transfer capabilities and reduce their fouling rates. We try to go deeper into knowledge of decaying swirl flows, for low Reynolds number for which energy interest is greater a priori. First, we study the flow field with optical methods in order to identify type of vortex characteristics of the swirl. Second, electrochemical method is used to measure the unsteady wall shear stress. By analogy, these measurements give a first estimate of the heat transfer for the case of non-isothermal flows.

L’histoire géologique récente de Mars reste peu étudiée, comparativement à l’histoire « primitive » de Mars (>3,5 Ga). Cependant, l’arrivée de nouvelles images haute résolution a permis d’identifier la présence de ravines à la surface de terrains très récents. Dans ce travail, nous nous sommes attaché à caractériser la morphologie des ravines et les processus qui les ont générés. Ces nouvelles observations relancent la question de la présence d’eau liquide actuellement à la surface de Mars que ce soit à l’état pur ou sous forme de mélange (saumure, coulée de débris...). Des simulations expérimentales en chambre froide à la pression atmosphérique de Mars et de la Terre ont été menées. Elles ont notamment permis de quantifier le rôle de la teneur en eau dans la couche active du pergélisol sur le mécanisme de formation des ravines et leur mobilité. Nous avons également décrit l’évolution saisonnière de petits réseaux ramifiés qui se sont développés chaque année au printemps durant la période 2007-2012. / The recent geological history of Mars remains poorly studied, in comparison to theearly history of Mars (>3,5 Ga). However, the acquisition of new high-resolution imagesallowed to identified the presence of gullies on the surface of recent landforms such asdunes. In this work, we focused on characterizing the morphology of gullies and theirprocess(es) of formation. These new observations revive the issue of the presence of liquid water present on the surface of Mars than either pure or as a mixture (brine, debris flow ...). Experimental simulations in a cold room at Martian and terrestrial atmospheric pressure have been conducted. In particular, they allowed us to quantify the role of water content in the active layer of the permafrost in order to better constrain the mechanism of formation of gullies and their motion. We also described the seasonal evolution of small branched networks developed at spring during the 2007-2012 period.

We present a method aimed at estimating global bilateral migration flows and assessing their determinants. We employ that fact that available net migration figures for a country are (nonlinear) aggregates of migration flows from and to all other countries of the world in order to construct a statistical model that links the determinants of (unobserved) migration ows to total net migration. Using simple specifications based on the gravity model for international migration, we find that migration flows can be explained by standard gravity model variables such as GDP differences, distance or bilateral population. The usefulness of such models is exemplified by combining estimated specifications with population and GDP projections in order to assess quantitatively the expected changes in migration flows to Europe in the coming decades. / Series: WWWforEurope

[pt] Os materiais termoplásticos compósitos, tais como o polipropileno reforçado com fibras de vidro curtas, são usados cada vez mais em diversos setores industriais. O reforço da fibra de vidro é uma forma utilizada para melhorar as propriedades mecânicas dos termoplásticos, devido ao elevado módulo das fibras e à melhor adesão entre as fibras e a matriz polimérica. No entanto, há poucas informações referentes às propriedades desses fluidos na literatura. No presente trabalho, um estudo das propriedades cisalhantes e elongacionais do polipropileno reforçado com fibras de vidros curtas é apresentado. As viscosidades cisalhantes e elongacionais foram obtidas em um reômetro capilar através da medição da queda de pressão na entrada convergente de um capilar axissimétrico. Utilizaram-se duas geometrias diferentes na entrada do capilar, para a obtenção dos dados experimentais: as geometrias semi-hiperbólica convergente e cônica convergente. Neste último, a viscosidade elongacional foi obtida a partir da queda de pressão na entrada, utilizando as análises de Cogswell e Binding. Simulações numéricas foram realizadas com o objetivo de investigar o comportamento do polipropileno em um processo de extrusão. As equações de conservação de massa e quantidade de movimento foram resolvidas utilizando o método dos elementos finitos a partir do programa comercial Polyflow (Ansys). Para modelar o comportamento da mecânico viscoelástico do polipropileno foram utilizados os modelos de Maxwell, Oldroyd-B e Phan-Thien Tanner (PTT), no entanto a comparação entre os resultados numéricos e os experimentais obtidos no reômetro capilar não apresentaram concordância satisfatória. / [en] Composite thermoplastic materials, like glass fiber reforced polypropropylene, are used increasingly in several industries. In particular, glass fiber reinforcement is used to improve the mechanical properties of thermoplastics, due to the high fiber modulous and to the better adesion between the fibers and the polymeric matrix. However, few data of material properties of these fluids are avaiable in the literature. In this work, a study of shear and elongational properties of a commercial short glass fiber reinforced polypropylene is presented. The shear and elongational viscosities were obtained using the pressure drop measured at a capillary rheometer, with axisymmetric converging dies. Two different die geometries were used: semihyperbolically convergent dies and conical convergent dies. In the last case, the elongational viscosity was obtained using the Cogswell and Binding analysis. Numerical simulations were also performed, to investigate the flow field through the extrusion die process, and to evaluate the pressure drop and elongational viscosity. The conservation equations of mass and momentum were solved via the finite element method, using the commercial program POLYFLOW (Ansys). The Maxwell, Oldroyd B and Phan Thien-Tanner (PTT) constitutive equations were used to model the viscoelastic mechanical behavior of Polypropylene, but the comparison between numerical results and experimental data obtained from the capillary rheometer did not show good agreement.