351 |
An Exploration of Circuit Similarity for Discovering and Predicting Reusable HardwareZeng, Kevin 27 April 2016 (has links)
A modular reuse-based design methodology has been one of the most important factors in improving hardware design productivity. Traditionally, reuse involves manually searching through repositories for existing components. This search can be tedious and often unfruitful. In order to enhance design reuse, an automated discovery technique is proposed: a reference circuit is compared with an archive of existing designs such that similar circuits are suggested throughout the design phase. To achieve this goal, methods for assessing the similarity of two designs are necessary. Different techniques for comparing the similarity of circuits are explored utilizing concepts from different domains. A new similarity measure was developed using birthmarks that allows for fast and efficient comparison of large and complex designs. Applications where circuit similarity matching can be utilized are examined such as IP theft detection and reverse engineering. Productivity experiments show that automatically suggesting reusable designs to the user could potentially increase productivity by more than 34% on average. / Ph. D.
|
352 |
Open-Source Bitstream Generation for FPGAsSoni, Ritesh K. 30 August 2013 (has links)
Bitstream generation has traditionally been the single part of the FPGA design flow that has not been openly reproduced. This work enables bitstream generation for "limited" resources without reverse-engineering or violating End-User License Agreement terms. Two use cases in particular have motivated this work--embedded bitstream generation and fast bitstream generation for small changes in design--both of which are not feasible with the Xilinx's bitstream generation tool.
The approach is to first define a set of primitives which can implement an arbitrary digital design and create a library of micro-bitstreams of the primitives. An input design is then mapped to the set of primitives and a bitstream for the design is generated by merging the corresponding micro-bitstreams. This work uses architectural primitives. Initial support is limited to the Virtex-5 and Virtex-7 family of FPGAs from Xilinx, but it can be extended to other Xilinx architectures. Nearly all routing resources in the device, as well as the most common logic resources are supported by this work. / Master of Science
|
353 |
In-System Testing of Configurable Logic Blocks in Xilinx 7-Series FPGAsModi, Harmish Rajeshkumar 30 July 2015 (has links)
FPGA fault recovery techniques, such as bitstream scrubbing, are only limited to detecting and correcting soft errors that corrupt the configuration memory. Scrubbing and related techniques cannot detect permanent faults within the FPGA fabric, such as short circuits and open circuits in FPGA transistors that arise from electromigration effects. Several Built-In Self-Test (BIST) techniques have been proposed in the past to detect and isolate such faults. These techniques suffer from routing congestion problems in modern FPGAs that have a large number of logic blocks. This thesis presents an improved BIST architecture for all Xilinx 7-Series FPGAs that is scalable to large arrays. The two primary sources of overhead associated with FPGA BIST, the test time and the memory required for storing the BIST configurations, are also reduced when compared to previous FPGA-BIST approaches. The BIST techniques presented here also eliminate the need for using any of the user I/O pins, such as a clock, a reset, and test observation pins; therefore, it is suitable for immediate deployment on any system with Xilinx 7-Series FPGAs. With faults detected, isolated, and corrected, the effective MTBF of a system can be extended. / Master of Science
|
354 |
FPGA-Roofline: An Insightful Model for FGPA-based Hardware Acceleration in Modern Embedded SystemsPahlavan Yali, Moein 17 January 2015 (has links)
The quick growth of embedded systems and their increasing computing power has made them suitable for a wider range of applications. Despite the increasing performance of modern embedded processors, they are outpaced by computational demands of the growing number of modern applications. This trend has led to emergence of hardware accelerators in embedded systems. While the processing power of dedicated hardware modules seems appealing, they require significant effort of development and integration to gain performance benefit. Thus, it is prudent to investigate and estimate the integration overhead and consequently the hardware acceleration benefit before committing to implementation. In this work, we present FPGA-Roofline, a visual model that offers insights to designers and developers to have realistic expectations of their system and that enables them to do their design and analysis in a faster and more efficient fashion. FPGA-Roofline allows simultaneous analysis of communication and computation resources in FPGA-based hardware accelerators. To demonstrate the effectiveness of our model, we have implemented hardware accelerators in FPGA and used our model to analyze and optimize the overall system performance. We show how the same methodology can be applied to the design process of any FPGA-based hardware accelerator to increase productivity and give insights to improve performance and resource utilization by finding the optimal operating point of the system. / Master of Science
|
355 |
Communication Synthesis for MIMO Decoder MatricesQuesenberry, Joshua Daniel 15 September 2011 (has links)
The design in this work provides an easy and cost-efficient way of performing an FPGA implementation of a specific algorithm through use of a custom hardware design language and communication synthesis. The framework is designed to optimize performance with matrix-type mathematical operations. The largest matrices used in this process are 4x4 matrices. The primary example modeled in this work is MIMO decoding. Making this possible are 16 functional unit containers within the framework, with generalized interfaces, which can hold custom user hardware and IP cores.
This framework, which is controlled by a microsequencer, is centered on a matrix-based memory structure comprised of 64 individual dual-ported memory blocks. The microsequencer uses an instruction word that can control every element of the architecture during a single clock cycle. Routing to and from the memory structure uses an optimized form of a crossbar switch with predefined routing paths supporting any combination of input/output pairs needed by the algorithm.
A goal at the start of the design was to achieve a clock speed of over 100 MHz; a clock speed of 183 MHz has been achieved. This design is capable of performing a 4x4 matrix inversion within 335 clock cycles, or 1,829 ns. The power efficiency of the design is measured at 17.15 MFLOPS/W. / Master of Science
|
356 |
Module Shaping and Exploration in Rapid FPGA Design and Assembly WorkflowsLee, Kevin 25 June 2015 (has links)
The modular design methodology has been widely adopted to harness the complexity of large FPGA-based systems. As a result, a number of commercial and academic tool flows emerged to support modular design including Hierarchical Design Flow and Partial Reconfiguration Flow, OpenPR, HMFlow, PARBIT, REPLICA, GoAhead and QFlow frameworks. As all of these projects have shown, a modular approach raises the abstraction level, provides clear boundaries for incremental design, reduces placement complexity, and improves productivity. At the physical layer, modules can be compiled into rectangular regions, suitable for placement on the FPGA fabric. Creating a design then becomes the process of placing all of the modules on the FPGA, followed by inter-module routing. FPGAs, however, are not homogenous, and the shape of individual modules could greatly impact overall device utilization. Prior work in modular assembly utilize modules with a single shape and aspect ratio in the assembly process. Due to the increasing size and heterogeneity of contemporary FPGAs, the placement flexibility of such a module is becoming increasingly limited. This thesis introduces a process that exploits offline shape generation and exploration, enabling the selection of shapes using criterias such as resource usage efficiency, placement flexibility, and device utilization. Module shapes can be generated with these criterias in mind while still taking advantage of the reduced placement complexity of modular design and assembly / Master of Science
|
357 |
Automatic Generation of Efficient Parallel Streaming Structures for Hardware ImplementationKoehn, Thaddeus E. 30 November 2016 (has links)
Digital signal processing systems demand higher computational performance and more operations per second than ever before, and this trend is not expected to end any time soon. Processing architectures must adapt in order to meet these demands. The two techniques most prevalent for achieving throughput constraints are parallel processing and stream processing. By combining these techniques, significant throughput improvements have been achieved. These preliminary results apply to specific applications, and general tools for automation are in their infancy. In this dissertation techniques are developed to automatically generate efficient parallel streaming hardware architectures. / Ph. D.
|
358 |
A Hardware Evaluation of a NIST Lightweight Cryptography CandidateColeman, Flora Anne 04 June 2020 (has links)
The continued expansion of the Internet of Things (IoT) in recent years has introduced a myriad of concerns about its security. There have been numerous examples of IoT devices being attacked, demonstrating the need for integrated security. The vulnerability of data transfers in the IoT can be addressed using cryptographic protocols. However, IoT devices are resource-constrained which makes it difficult for them to support existing standards. To address the need for new, standardized lightweight cryptographic algorithms, the National Institute of Standards and Technology (NIST) began a Lightweight Cryptography Standardization Process. This work analyzes the Sparkle (Schwaemm and Esch) submission to the process from a hardware based perspective. Two baseline implementations are created, along with one implementation designed to be resistant to side channel analysis and an incremental implementation included for analysis purposes. The implementations use the Hardware API for Lightweight Cryptography to facilitate an impartial evaluation. The results indicate that the side channel resistant implementation resists leaking data while consuming approximately three times the area of the unprotected, incremental implementation and experiencing a 27% decrease in throughput. This work examines how all of these implementations perform, and additionally provides analysis of how they compare to other works of a similar nature. / Master of Science / In today's society, interactions with connected, data-sharing devices have become common. For example, devices like "smart" watches, remote access home security systems, and even connected vending machines have been adopted into many people's day to day routines. The Internet of Things (IoT) is the term used to describe networks of these interconnected devices. As the number of these connected devices continues to grow, there is an increased focus on the security of the IoT. Depending on the type of IoT application, a variety of different types of data can be transmitted. One way in which these data transfers can be protected is through the use of cryptographic protocols. The use of cryptography can provide assurances during data transfers. For example, it can prevent an attacker from reading the contents of a sensitive message. There are several well studied cryptographic protocols in use today. However, many of these protocols were intended for use in more traditional computing platforms. IoT devices are typically much smaller in size than traditional computing platforms. This makes it difficult for them to support these well studied protocols. Therefore, there have been efforts to investigate and standardize new lightweight cryptographic protocols which are well suited for smaller IoT devices. This work analyzes several hardware implementations of an algorithm which was proposed as a submission to the National Institute of Standards and Technology (NIST) Lightweight Cryptography Standardization Process. The analysis focuses on metrics which can be used to evaluate its suitability for IoT devices.
|
359 |
Detecting Electromagnetic Injection Attack on FPGAs Using In Situ Timing SensorsGujar, Surabhi Satyajit 29 August 2018 (has links)
Nowadays, security is one of the foremost concerns as the confidence in a system is mostly dependent on its ability to protect itself against any attack. The area of Electromagnetic Fault Injection (EMFI) wherein attackers can use electromagnetic (EM) pulses to induce faults has started garnering increasing attention. It became crucial to understand EM attacks and find the best countermeasures. In this race to find countermeasures, different researchers proposed their ideas regarding the generation of EM attacks and their detection. However, it is difficult to see a universal agreement on the nature of these attacks.
In this work, we take a closer look at the analysis of the primary EMFI fault models suggested earlier. Initial studies had shown that EM glitches caused timing violations, but recently it was proposed that EM attacks can create bit sets and bit resets. We performed a detailed experimental evaluation of the existing detection schemes on two different FPGA platforms. We present their comparative design analysis concerning their accuracy, precision, and cost. We propose an in situ timing sensor to overcome the disadvantages of the previously proposed detection approaches. This sensor can successfully detect most of the electromagnetic injected faults with high precision. We observed that the EM attack behaves like a localized timing attack in FPGAs which can be identified using the in situ timing sensors. / MS / When computers are built only for a specific application, they are called embedded systems. Over the past decade, there has been an incredible increase in the number of embedded systems around us. Right from washing machines to electronic locks, we can see embedded systems in almost every aspect of our lives. There is an increasing integration of embedded systems in applications such as cars and buildings with the advent of smart technologies. Due to our heavy reliance on such devices, it is vital to protect them against intentional attacks. Apart from the software attacks, it is possible for an attacker to disrupt or control the functioning of a system by physically attacking its hardware using various techniques. We look at one such technique that uses electromagnetic pulses to create faults in a system. We experimentally evaluate two of the previously suggested methods to detect electromagnetic injection attacks. We present a new sensor for this detection which we believe is more effective than the previously discussed detection schemes.
|
360 |
Design and Analysis of a Real-time Data Monitoring Prototype for the LWA Radio TelescopeVigraham, Sushrutha 11 March 2011 (has links)
Increasing computing power has been helping researchers understand many complex scientific problems. Scientific computing helps to model and visualize complex processes such as molecular modelling, medical imaging, astrophysics and space exploration by processing large set of data streams collected through sensors or cameras. This produces a massive amount of data which consume a large amount of processing and storage resources. Monitoring the data streams and filtering unwanted information will enable efficient use of the available resources. This thesis proposes a data-centric system that can monitor high-speed data streams in real-time. The proposed system provides a flexible environment where users can plug-in application-specific data monitoring algorithms. The Long Wavelength Array telescope (LWA) is an astronomical apparatus that works with high speed data streams, and the proposed data-centric platform is developed to evaluate FPGAs to implement data monitoring algorithms in LWA. The throughput of the data-centric system has been modeled and it is observed that the developed data-centric system can deliver a maximum throughput of 164 MB/s. / Master of Science
|
Page generated in 0.0389 seconds