Current gas sensor technology, although meeting the minimum requirements in many instances, suffers for a number of limitations. Hence, there is currently a considerable volume of research being undertaken at many laboratories of different countries. In the past, all chemical sensors and catalyst were optimized empirically by a trial and error method. Today, however, systematic research and development is becoming increasingly important in order to improve sensors and to find new sensing principles. Obtaining a long term stable gas sensor with improved sensitivity, selectivity, and low cost for mass production passes through fundamental research and material characterization to build new chemically sensitive devices or to improve existing ones. The bottom line in the design and manufacture of modern gas sensors is the transfer from ceramic(of Figaro type) to thin film gas sensors(TFGs). This transfer provides new opportunities for further microminiaturization, power consumption and cost reduction of gas sensors. Therefore, at the present time, thin film gas sensors are the basis for the design of the modern gas sensitive multi-parameter microsensor systems. Applications of these systems include environment, security, home systems, smart buildings, transportation, discrete manufacturing, process industries and so on. Microelectromechanical systems(MEMS) based integrated gas sensors present several advantages for these applications such as ease of array fabrication, small size, and unique thermal manipulation capabilities. MEMS based gas sensors; which are usually produced using a standard CMOS(Complimentary Metal Oxide Semiconductor) process, have the additional advantages of being readily realized by commercial foundries and amenable to the inclusion of on-chip electronics. In order to speed up the design and optimization of such integrated sensors, microheater designs for gas sensor applications have been presented as first part of the present thesis. As heater design is the key part for a gas sensor operation. So 3D simulations have been used to optimize micro-heater geometry. The application of MEMS Design Tool(COVENTORWARE) has been presented to the design and analysis of micro-hotplate (MHP) structures. Coupled Electro-thermal analysis provided an estimation of thermal losses and temperature distribution on the hotplate for realistic geometrical and material parameters pertinent to fabrication technology. Five microheater designs have been proposed in terms of different sizes and shapes in order to optimize the microhotplate structure to be used for gas sensor operation for the specified range of temperature and power consumption. To produce a gas sensor, which is able to detect LPG leak, thin films of tin oxide have been developed. FR sputtering has been used to deposit gas sensitive tin oxide thin filmls under various deposition conditions. Four different values of pressure in the range from high pressure(5 X 10-2 mbar) to lower pressure (2 X 10-3 mbar), three RF power values 50, 75, 100 W and varied oxygen percentage in sputtering atmosphere (0-18%) have been used to optimize the material properties of tin oxide thin films to study the sensitivity towards LPG. All the samples have been analyzed using various macro and microscopic characterization techniques. Extensive studies have been done on the sensor response for the samples deposited under different conditions. Finally the sample film deposited at 5 x 10-3 mbar, with applied power of 75 W in the presence of 8% oxygen, showed maximum sensitivity towards LPG.

Today there is a great deal of interest in the development of gas sensors for applications like air pollution monitoring, indoor environment control, detection of harmful gases in mines etc. Based on different sensing principles, a large variety of sensors such as semiconductor gas sensors, thermoelectric gas sensors, optical sensors and thermal conductivity sensors have been developed. The present thesis reports a detailed account of a novel method followed for the design and development of a thermoelectric gas sensor for sensing of Volatile Organic Compounds. Thermoelectric effect is one of the highly reliable and important working principles that is widely being put into practical applications. The thermoelectric property of semiconducting tin oxide film has been utilized in the sensor that has been developed. The thermoelectric property of semiconducting tin oxide film has been utilized in the sensor. The deposition parameters for sputtering of tin oxide film have been optimized to obtain a high seebeck coefficient. A test set-up to characterize the deposited films for their thermoelectric property has been designed and developed. A novel method of increasing the seebeck coefficient of tin oxide films has been successfully implemented. Thin films of chromium, copper and silver were used for this purpose. Deposition of the semiconducting oxide on strips of metal films has led to a noticeable increase in the seebeck coefficient of the oxide film without significantly affecting its thermal conductivity. The next part of our work involved development of a gas sensor using this thermoelectric film. These sensors were further tested for their response to volatile organic compounds. The sensor showed significant sensitivity to the test gases at relatively low temperatures. In addition to this, the developed sensor is also selective to acetone gas.

Graphene has been shown to be very powerful as a transducer in many biosensor applications due to its high sensitivity. This enables smaller surfaces and therefore less material consumption when producing sensors and concequently cheaper and more portable sensors compared to the commercially available sensors today. The electrical properties of graphene are very sensitive to gas exposure why presence of molecules or small changes in concentration could easily be detected when using graphene as a sensing layer. Graphene is sensitive towards many molecules and in order to detect and possibly identify gas molecules the surface needs to be functionalized. The intention of this project was to use nanoparticles (NPs) to further increase sensitivity and specificity towards selected molecules and also enable biofunctionalization of the NPs, and by that tune the electrical properties of the graphene. This study proposes the use of Fe3O4 and TiO2 NPs to enable sensitive detection of volatile gases and possibly further functionalization of the NPs using biomolecules as a detecting agent in a liquid-phasebiosensor application. The interaction between graphene and NPs have been investigated using several surface charactarization methods and electrical measurements for detection of gaseous molecules and also molecules in a liquid solution. The characterizing methods used are XPS, AFM with surface-potential mapping and Raman spectroscopy with reflectance mapping in order to investigate the NPs interaction with the graphene surface. Sensors where manufactured for gas-phase detection of CO, formaldehyde, benzene and NH3 specifically and display differences in sensitivity and behavior of the Fe3O4 and TiO2 NPs respectively. For liquid measurements the difference in behavior in two buffers was investigated using an in-house flow-cell setup. The surface charecterizing measurements indicated that just a small difference could be found between the two NPs, however a significant change in sensor response could be detected as a function of coverage. The liquid and gas-phase measurements rendered information on differences in sensitivity between the NPs and between analytes where TiO2 showed a higher level of sensitivity towards most of the gases investigated. Both Fe3O4 and TiO2 NP coated graphene showed capability to detect formaldehyde and benzene down to 50 ppb and 5 ppb respectively. The sensitive gas detection could help protecting individuals being exposed to a hazardous level of volatile gases if concentrations increase rapidly or at a long term exposure with lower concentrations, improving saftey and health where these gases are present.

Yttria stabilized Zirconia (8YSZ) is an extensively used solid electrolyte, which finds applications in electrochemical sensors, solid oxide fuel cells and gate oxide in MOSFETs. Recent studies report that YSZ thin films are better performers than their bulk counterparts, in terms of ionic conductivity even at moderate temperatures. YSZ thin films also attract attention with the scope of device miniaturization. However, most of the studies available in the literature on YSZ thin films focus mainly on their electrical characterization. In this work, YSZ thin films were deposited, characterized and possible use of sensors were evaluated. In the present work, 8 mol% yttria stabilized zirconia thin films were deposited using RF magnetron reactive sputtering under different deposition conditions. Films with thicknesses ranging from few tens to few hundreds of nanometres were deposited. The deposited films were subjected to morphological, structural, compositional and electrical characterizations. Deposition and annealing conditions were optimized to obtain dense, stoichiometric and crystalline YSZ thin films. The ionic conductivity of 200 nm nanocrystal line thin film was found to be two orders of magnitude higher than the bulk. The ionic conductivity increased with the decrease in film thickness. Compositional analyses of a set of YSZ thin films revealed free surface yttrium segregation. The free surface segregation of dopants can locally alter the surface chemistry and influence the oxygen transfer kinetics across the electrode-electrolyte interface. Although number of reports are available on the segregation characteristics in YSZ bulk, no reports are available on yttria segregation in YSZ thin film. Hence, this work reports detailed investigations on the free surface yttria segregation in YSZ thin films using angle resolved X-ray photoelectron spectroscopy (XPS). Influence of annealing temperature, film thickness, annealing time, and purity on the segregation concentration was determined. It was found that the most important factor that determines the segregation was found to be the target purity. The segregation depth profile analysis showed that the segregation layer depth was proportional to segregation concentration. Free surface segregation reduced the ionic conductivity of the YSZ thin films roughly about a factor. However, segregation did not affect the film’s morphology, grain size, crystallinity and activation energy. The difference in ionic conductivity observed in the segregated and clean YSZ films suggests that dopant free surface segregation could also be one of the reasons for the variable ionic conductivity reported in the literature. For using YSZ in miniaturized devices, micro-structuring of YSZ is important. It has been reported that the wet etching techniques available for YSZ were not repeatable and do not etch annealed YSZ samples. Reactive ion etching (RIE) is better suited for YSZ patterning due to its capability to offer high resolution, easy control and tenable anisotropic/isotropic pattern transfer for batch processing. Although reports are available on the dry etching of zirconia and yttria thin films, no studies were reported on the dry etching of YSZ thin films. In this work, inductively coupled reactive ion etching (ICP-RIE) using fluorine and chlorine chemistries were employed to etch YSZ thin films. Optimized etching conditions were identified by varying different process parameters like, type of gas, gas flow rate, RF power, ICP power, chamber pressure and carrier wafer in the ICP-RIE process. Optimized conditions were chosen by examining the etch depth, composition analyses before and after etch using XPS, selectivity towards SiO2 (which is the most common buffer layer) and surface roughness. Etch chemistries involved in a particular plasma (SF6, Cl2 and BCl3) were discussed with the help of surface composition and etch thicknesses. The results showed that etching YSZ with BCl3 plasma at optimized conditions yielded best results through oxygen-scavenging mechanism. A maximum etch rate of 53 nm/min was obtained in BCl3 plasma using PECVD Si3N4 carrier wafer at an ICP power of 1500 W, RF power of 100 W, chamber pressure of 5 mTorr with 30 sccm BCl3 flow. Sensing devices were designed by employing YSZ thin film as solid electrolyte and nickel oxide and gold thin film as sensing and reference electrodes, respectively to evaluate the possible use of YSZ thin film in miniaturized NO2 sensor. The electrodes were deposited in inter-digitated pattern. Two types of electrodes were designed with different number of fingers in symmetric and asymmetric configurations. The NO2 sensing was performed in the concentration range of 25 to 2000 ppm at three different temperatures, 673, 773 and 873 K in mixed potential and impedance metric modes. The mixed potential type measurements were carried out only for asymmetric cell in two different electrode configurations. The impedance metric type measurements were carried out for both symmetric and asymmetric cells in two different electrode configurations. Preliminary NO2 sensing experiments in both the types of measurements revealed that in devices with electrodes having more fingers were better in performance. In mixed potential type sensors, sensitivity was measured as the amount of voltage generated when the sensor was exposed to a test gas. The generated voltage was found to be proportional to the logarithm of NO2 concentration in the entire measurement range (50 to 2000 ppm) with the regression fitting parameter, adj.R2 around 0.97 to 0.99 in all the cases. A maximum potential of 271 mV was measured with 2000 ppm NO2 at 873 K. The response and recovery times of the sensors were sensitive to the operating temperature. In impedance metric mode, the sensitivities were measured as the variation in the low frequency phase angle (∆ φ) when the gas concentration is changed. The frequency range of the measurement was from 0.01 Hz to100 kHz. The response time in the impedance metric sensors was comparable to that of mixed potential sensors. But the recovery time in impedance metric sensors was much was slower than the mixed potential type for all the concentrations. The sensors showed linear response only in a narrow range of 50 to 500 ppm with regression fitting value, R2 around 0.98 in all the cases. Above 500 ppm, the sensitivity value was observed to be saturated. From the gas sensing studies performed on the miniaturized sensors, it was found that the mixed potential type sensing mode is better than the impedance metric type in YSZ thin film based devices. However detailed interference gas studies were needed before drawing any conclusion. In summary, the studies presented in the work have contributed to the understanding of free surface yttria segregation behaviour in YSZ thin films. Micromachining conditions were optimized for both pristine and annealed YSZ thin films. Suitability of YSZ thin film based miniaturized NO2 gas sensor was evaluated.

Monitoring the working environment of laboratories and industries for pollutants is of primary concern to ensure the healthiness of working personnel. Semiconducting metal oxides (SMOs) are sensitive to the gas ambience and can be tuned for sensing purpose. As SMOs are not selective, an array of sensors with differential selectivity may resolve to great extent. The objective of the thesis is to understand the physicochemical properties and gas sensing characteristics of Cr1-xFexNbO4. Applying principal component analysis to the sensor response data either for selection of features or for differentiation of analysts is also of concern. Preparation of Cr1-xFexNbO4, phase characterization, lattice parameters estimation, morphological and micro chemical analysis (SEM & EDX), electrical characterization by direct current (DC & AC) in the temperature range of 423 K to 573 K, weighted magnetic moment of iron and chromium deduced from susceptibility measurements, spin nature of iron and surface compositions of different valences of chromium and iron deduced from X-ray photoelectron spectroscopy of are presented. The wide dynamic range hydrogen sensing characteristics of CrNbO4 bulk pellets at different temperatures along with the cross-sensitivity towards NH3, NOx(NO+NO2) and PG (petroleum gas) are investigated. The preparation of Cr1-xFexNbO4 thick and thin films by screen-printing and PLD are also presented. The thick films are tested at different temperatures towards hydrogen. The n-type or p-type nature of thick films towards hydrogen with varying iron concentration in Cr1-xFexNbO4 is reported. The thin films are characterized for phase formation, morphology by XRD, SEM and AFM. XPS performed surface characterization. Electrical resistance measurements at different temperatures and preliminary experiments on hydrogen sensing are presented. The probable hydrogen sensing mechanism of CrNbO4 was revealed by X-ray photoelectron spectroscopy. The experimentally observed reduction in metal ion oxidation states upon interacting with hydrogen is best illustrated by Kröger Vink notation. Principal component analysis was applied for three different types of studies: i) The fit parameters of the transient response of CrNbO4 thick films towards hydrogen are analyzed for finding out the better feature for calibration, ii) Different thick films of CrNbO4, Cr0.5Fe0.5NbO4 and FeNbO4 operated at various temperatures for testing H2 and VOCs are analyzed for redundancy in sensor behaviour and iii) Cr0.8Fe0.2NbO4 thick films are studied for sensing H2, NH3 and their mixtures and usefulness of PCA in resolving them in PC-space. In addition, H2 and VOCs are tested at different temperatures and redundancy in temperature is deduced to construct a sensor array with a minimum number of sensors. Finally, a sensor array consisting of Cr0.8Fe0.2NbO4 thick films, operating at different temperatures is built, and qualitative discrimination of analysts in PC-space is demonstrated. Finally, the major findings of the present investigations and suggestions for future aspects of experimentation are provided

This thesis deals with the research work carried out for the development of novel applications by integrating biomolecules with various nanostructures. The thesis is organized as follows: Chapter 1 reviews the properties of nanomaterials which are important to consider while developing them for various biological and other applications. It discusses the factors which affect the cytotoxicity of nanocrystals towards living cells, photocatalytic mechanisms of nanocrystals that work behind the inactivation of bacterial cells and gas sensing properties of nanocrystals. It also mentions about the integration of biomolecules with nanomaterials which is useful for the development of biosensors, materials that are presently used for fabricating biosensors and the challenges associated with designing successful biosensors. Chapter 2 presents the antibacterial and anticancer properties of ZnO/Ag nanohybids. In this study a simple route to synthesize ZnO/Ag nanohybrids by microwave synthesis has been established where ZnO/Ag nanohybrids have shown synergistic cytotoxicity towards mammalian cells. The observed synergism in the cytotoxicity of ZnO/Ag nanohybrids could lead to the development of low dose therapeutics for cancer treatment. Chapter 3 presents photocatalytic inactivation of bacterial cells by pentavalent bismuthates class of materials. AgBiO3 which was obtained from KBiO3 by ion-exchange method was investigated for its photocatalytic inactivation properties towards E.coli and S.aureus cells under dark and UV illumination conditions. Chapter 4 presents the integration of DNA molecules with ZnO nanorods for the observation of Mott-Gurney characteristics. In this study, ZnO nanorods were synthesized hydrothermally and were characterized by TEM and XRD analysis. DNA molecules were immobilized over ZnO nanorods which were confirmed by UV-Vis spectroscopy and confocal florescence microscopy. Solution processed devices were fabricated by using these DNA immobilized nanostructures and I-V characteristics of these devices were taken in dark and under illumination conditions at different wavelengths of light at fixed intensity. Interestingly, Mott-Gurney law was observed in the I-V characteristics of the devices fabricated using DNA immobilized ZnO nanorods. Chapter 5 presents the chemical synthesis of molecular scale ultrathin Au nanowires. These nanostructures were then used for fabricating electronic biosensors. In this study, the devices were fabricated over Au nanowires by e-beam lithography and a methodology to functionalize Au nanowires and then characterize them by florescence microscopy as well as AFM has been established. The fabricated biosensors were employed for the label free, electrical detection of DNA hybridization process. Chapter 6 presents a simple, cost effective and solution processed route to fabricate devices using ultrathin Au nanowires. The devices were then used for sensing ethanol, H2 and NH3. An important property of these devices is that they can sense these gases at room temperature which reduce their operation cost and makes them desirable to use under explosive conditions.

The basic necessities to sustain life are – air, water and food. Although the harmful effects due to contaminated food or water are dangerous to life, these can be reduced/avoided by controlling the intake. Whereas, in case of air, the same amount of control cannot be exercised as there is very little, one can do in case of inhalation. Maximum damage to life is due to air contamination which can be detected and prevented by using gas sensors. The proper use of these sensors not only save lives, but also minimizes social and financial loss. The objective of this thesis work is to study and explore the use of p-type semiconducting material such as CuO, as a promising gas sensing material for organic compounds (VOCs), compatible with existing silicon fabrication technology. The Thesis consist of 7 chapters: Chapter 1 covers the general introduction about gas sensors, sensor parameters, criteria for the selection of sensing material, suitability of CuO as sensing material and a brief literature survey. The second chapter includes the selection of substrate, cleaning procedures and suitable deposition method. The deposition method used in the present thesis work is DC/RF magnetron sputtering. The reactive magnetron sputtering is employed during the deposition of CuO sensing films. It also includes basic introduction about some of the common material characterization techniques. This is followed by Chapter 3 which includes the optimization of sputtering process parameters such as applied power, working pressure, Ar-O2 ratio and substrate temperature for CuO sensing film and the effect of these on surface morphology. Information on the optimized sputtering parameters for electrode film (silver and gold) deposition has also been included in this chapter. In order to study the sensing behavior of the sensor, suitable testing set-up is necessary. This leads us to Chapter 4 that discusses the development of an in-house built sensor testing setup and its automization using MATLAB. The automated testing set-up facilitates off-time data plotting as well as real-time data plotting during the sensing process. To demonstrate the working of the set-up, some initial results obtained are also included in this chapter. After ascertaining the functioning of the automated gas sensor testing set-up, detailed study on the sensing behavior of nanostructured CuO films was performed. This information along with the necessary details is included in Chapter 5. The sensing response of nanostructured CuO films has been studied for different VOCs such as alcohol, toluene and benzene. The study carried out on the effect of different surface additives like multi-walled carbon nanotubes (MWNTs), gold or platinum on ethanol sensing has also been included in this chapter. During the use of MWNTs as surface additives, different concentrations of MWNTs – 0.01 mg, 0.05 mg and 0.1 mg have been dispersed on the CuO sensing film. The sample with lowest concentration of MWNTs exhibited highest sensitivity and lower response time. It is due to the fact that, higher concentrations of MWNTs do not result into uniform dispersion over the CuO films and cover the sensing film almost completely. Operating temperature is the most important factor affecting the performance of a gas sensor. In order to maintain the operating temperature for the portable sensor, the sensor is usually integrated with a heater. The chapter 6 deals with heater optimization including design, simulation and fabrication. In this chapter, microheater as well as macro-heaters were simulated and fabricated. The fabricated macro-heater is bonded with the sensor by eutectic bonding. One of the bonded samples was studied for its sensing response. The final chapter of the thesis deals with the conclusion of present research work and the possible further work on CuO gas sensor.

Ce travail de thèse a porté sur l’étude des propriétés fondamentales de bâtonnets quantiques InAs/InP formant la zone active de diodes lasers, à l’aide de microscopie et spectroscopie à effet tunnel à balayage. Nous avons pu étudier la nature de la dimensionnalité de ces nanostructures, mesurer la structure électronique de bâtonnets uniques en fonction de leur position dans la jonction PIN et également établir la cartographie de leur fonction d’onde à l’aide de mesures de conductivité différentielle. Nous avons de plus étudié le potentiel de ces bâtonnets quantiques comme milieu à gain de diodes lasers pour applications en détection de gaz. Nous avons optimisé des structures actives qui ont permis une émission laser en continu jusqu’à 2 µm et nos résultats expérimentaux et de modélisation montrent que cette longueur d’onde d’émission peut être étendue encore plus vers le MIR. De plus nous avons conçu et développé un procédé de fabrication de lasers DFB à couplage latéral à base de réseau de Bragg à fort rapport cyclique qui a permis d’améliorer de façon significative le coefficient de couplage (>40 cm-1). Ce procédé ne nécessitant pas de reprise d’épitaxie est très simple et à bas coût dans sa réalisation. Les valeurs élevées du coefficient de couplage sont d’autre part obtenues sans recourir à des réseaux de Bragg métalliques, comme c’est généralement le cas dans la littérature, qui introduisent des pertes de propagation non négligeables. Cette nouvelle approche a été mise en œuvre pour la réalisation d’un laser monofréquence émettant à 1,986 µm, avec une puissance de sortie par face de 4,5 mW, un courant de seuil de 65 mA et un taux de suppression des modes latéraux > 37 dB. Ces paramètres sont parfaitement adaptés à la détection e.g. de NH3, ce qui est très important pour des applications industrielles. Ce type de laser DFB à couplage latéral (LC-DFB), à fort k et faibles pertes de propagation constitue une brique de base pour la réalisation future de composants à deux sections présentant une gamme élevée d’accordabilité en continu pour des applications aussi bien en détection de gaz qu’en télécommunications optiques / During this work, we investigated the fundamental properties of single Qdashes, that were embedded in a diode-laser structure configuration, using cross-sectional scanning tunneling microscopy and spectroscopy. The main results included addressing the open question of the Qdash dimensionality nature, probing the electronic structure of individual nanostructures in respect to their precise location in the p-i-n junction and imaging of the Qdash electronic squared wavefunctions by high-stability differential conductivity mapping. In addition, we investigated Qdashes as the active material of semiconductor lasers, with special attention to the gas sensing application. We optimized Qdash based material at specific emission wavelengths above 1.55 um, and demonstrated CW lasing up to 2 um with high performances. Our experimental and simulation results show to be promising for further pushing the emission wavelength out, towards longer wavelengths in the future, using the same material system. Furthermore, a novel process has been developed, for the fabrication of laterally-coupled DFB lasers, based on high-duty-cycle etched Bragg gratings: The process provides appreciably improved coupling coefficients suitable for practical applications (~40 cm-1), while avoiding the complicated high cost processing steps, that had been employed in previous works (regrowth over corrugated substrates/ FIB lithography) and without using the conventional highly absorbing metal gratings, which introduce significant additional losses. We implemented this approach on our optimized epi-wafer and demonstrated high SMSR (>37dB) LC-DFB lasers emitting at 1.986 um, with an output power per facet up to 4.5 mW and Ith down to 65 mA for a 630 um cavity length, suitable for detection of the NH3 gas. These high-κ, low loss, preliminary results of our LC-DFB lasers, achieved using etched gratings, open the way for the fabrication of a two-section LC-DBR laser using the same technology in the future. Such a laser would combine a significantly simplified process, with sufficient feedback, continuous wide range tunability, and negligible grating-induced losses, finding potential applications both in sensing and telecommunications applications

Thesis (M.Sc. (Physics)) -- University of Limpopo, 2022 / The gas sensing performance of two-dimensional (2D) hexagonal boron nitride nanosheets (h-BNNSs) has being studied by means of computational and experimental methods. The structural, stability and vacancies properties of both defect free and defected 2D h-BNNSs were studied using the classical molecular dynamics (MD) approach. The calculations were performed in the NVT Evans and NPT hoover ensembles using the Tersoff potentials with the Verlet leapfrog algorithm to obtain reliable structural properties and energies for defect free, boron (B) and nitrogen (N) vacancies. B and N defect energies were calculated relative to the bulk defect free total energies, and the results suggest that N vacancy is the most stable vacancy as compared to the B vacancy. The radial distribution functions and structure factors were used to predict the most probable structural form. Mean square displacements suggests the mobility of B and N atoms in the system is increasing with an increase in the surface area of the nanosheets. Results obtained are compared with the bulk defect free h-BNNSs. Experimentally, 2D h-BNNSs were synthesised using the wet chemical reaction method through chemical vapour deposition (CVD) catalyst free approach. The X-Ray Diffraction (XRD), Transmission Electron Microscopy (TEM), Fourier Transform Infrared Spectroscopy (FTIR), Raman Spectroscopy (RM), UV-visible Spectroscopy (UV-VIS), dynamic light scattering (DLS), Energy Dispersion Spectroscopy (EDS) and Brunauer-Emmett Teller (BET) were adopted to attain the structural properties of the nanosheets. Each spectroscopic technique affirmed unique features about the surface morphology of h BNNSs. The crystallinity of the nanosheets with the stacking of the B and N vii honeycomb lattice was validated by the XRD, while the TEM disclosed the specimen orientations and chemical compositions of phases with the number of layers of a planar honeycomb BN sheet, the EDS express the atoms present in the samples and BET validated the surface area of the materials. The FTIR, RM, DLS and the UV-vis expressed the formation of the in-plane, out-of-plane h-BN vibrations and, the nature of the surface with the thickness, particles stability together with the optical properties of the nanosheets. From TEM, FTIR, RS and BET the material fabricated at 800°C showed different morphologies, large number of disordering together with high surface area, which enhances the sensing properties of the nanosheets. However, with an increase in temperature the sensitivity of the nanosheets was found to decrease. Additionally, the UV-vis results, confirmed a lower energy band gap of 4.79, 4.55 and 4.70 eV for materials fabricated at 800, 900 and 1000 °C, that improved the semiconducting properties of the materials, which in return enhanced the sensing properties of the nanosheets. The gas sensing properties of the 2D h BNNSs were also investigated on hydrogen sulphide (H2S) and carbon monoxide (CO). The fabricated sensor based on 800 – 900 °C h-BNNSs showed good sensitivity towards ppm of H2S at 250 °C. The excellent gas sensing properties could be attributed to high surface area, small crystallite size, defect/disordering of h BNNSs. Overall, the h-BNNSs were found to be more sensitive to H2S over CO. / University of Limpopo (UL) Mintek Council for Scientific and Industrial Research (CSIR) Center for High Performance Computing (CHPC)

Automatic Baseline Correction is the state-of-the-art calibration method of non-dispersive infrared CO2 sensing, which is the standard CO2 gas monitoring method. In this thesis, we improve it by introducing the dynamic baseline based on environmental data. The 96 data sets from 48 atmospheric stations verify the characteristics of the annual growth trend and seasonality of the baseline model. In order to improve the accuracy of the calibration, the k-means clustering method is used to identify different types of baselines. Then the localized dynamic baseline model is predicted by using the location information of the stations only, which provides an executable calibration implementation for dynamic baseline calibration without relying on historical CO2 data. / Automatisk baslinjekorrigering är den senaste kalibreringsmetoden för icke-dispersiv infraröd CO2 avkänning, vilket är standard CO2 gasövervakningsmetod. I denna avhandling förbättrar vi den genom att introducera den dynamiska baslinjen baserat på miljödata. De 96 datamängderna från 48 atmosfärstationer bekräftar egenskaperna för den årliga tillväxttrenden och säsongsmässigheten hos basmodellen. För att förbättra kalibreringens noggrannhet används k-medelklusteringsmetoden för att identifiera olika typer av baslinjer. Därefter förutses den lokaliserade dynamiska baslinjemodellen med endast platsinformationen för stationerna, som ger en körbar kalibreringsimplementering för dynamisk baslinjekalibrering utan att förlita sig på historisk CO2 data.