Simulation tools have progressed largely and in modern times they are commonly usedby engineers to design and simulate machines or part of machines before building and deploying them in the field. The field of Hardware-in-the-loop (HIL) is gaining significant interest among companies as they strive to enhance product safety and reliability simul-taneously reducing testing costs and accelerated development speed. This study presents the Real Time simulation improvements effectuated to the Steer and Brake by wire system on an underground face drill rig. These improvements in the model are validated with a comparison between simulated environment and real test data from the machine using a cosimulation between Matlab&Simulink with AMESim. At the end, this improved model is prepared to be compatible with an Hardware-in-the-loop application that requires an adequate computational time.

No description available.

No description available.

No description available.

No description available.

In this thesis a Power-Hardware-in-the-Loop (PHiL) test rig is developed forhydro-pneumatic suspension by utilizing the physical suspension unit together with asimulated vehicle model in MATLAB Simulink. Power-Hardware-in-the-Loop is the termfor combining simulation models with power-transmitting hardware components inreal-time. This is useful when a system contains some parts that are complex and somethat are simpler to model. The simple parts of the system can be modelled andsimulated in conjunction with more complex parts consisting of physical objects. Thereason for keeping the items to be tested as physical components is their complexity andunknown characteristics that can be difficult to estimate. By utilizing PHiL, vehiclecomponents can be tested and developed without the need for the actual vehicle, whilekeeping the characteristics that the physical vehicle would bring. The process included development of a real-time enabled vehicle model, evaluation ofcontrol strategies as well as selection of hardware used for a small scale test rig. The project resulted in a functional small scale single wheel test rig. Validationexperiments confirmed that the rig produced results close to expectations. Thecommunication between the the test rig and the simulated model was accurate andshowed the potential for a full scale test rig. It can be concluded that a PHiL test rigcan be a suitable option to full vehicle testing. The vehicle model is fully customisable,so that the suspension units can be tested in various configurations of vehicles.

This work demonstrates the capability of a power electronic based power hardware-inthe- loop (PHIL) platform to emulate electric machines for the purpose of a motor drive testbench with a particular focus on induction machine emulation. PHIL presents advantages over full-hardware testing of motor drives as the PHIL platform can save space and cost that comes from the physical construction of multiple electric machine test configurations. This thesis presents real-time models that were developed for the purpose of PHIL emulation. Additionally, real-time modeling considerations are presented as well as the modeling considerations that stem from implementing the model in a PHIL testbench. Next, the design and implementation of the PHIL testbench is detailed. This thesis describes the design of the interface inductor between the motor drive and the emulation platform. Additionally, practical implementation challenges such as common mode and ground loop noise are discussed and solutions are presented. Finally, experimental validation of the modeling and emulation of the induction machine is presented and the performance of the machine emulation testbench is discussed. / Master of Science / According to the International Energy Agency (IEA), electric power usage is increasing across all sectors, and particularly in the transportation sector [1]. This increase is apparent in one's daily life through the increase of electric vehicles on the road. Power electronics convert electricity in one form to electricity in another form. This conversion of power is playing an increasingly important role in society because examples of this conversion include converting the dc voltage of a battery to ac voltage in an electric car or the conversion of the ac power grid to dc to power a laptop. Additionally, even within an electric car, power converters transform the battery's electric power from a higher dc voltage into lower voltage dc power to supply the entertainment system and into ac power to drive the car's motor. The electrification of the transportation sector is leading to an increase in the amount of electric energy that is being consumed and processed through power electronics. As was illustrated in the previous examples of electric cars, the application of power electronics is very wide and thus requires different testbenches for the many different applications. While some industries are used to power electronics and testing converters, transportation electrification is increasing the number of companies and industries that are using power electronics and electric machines. As industry is shifting towards these new technologies, it is a prime opportunity to change the way that high power testing is done for electric machines and power converters. Traditional testing methods are potentially dangerous and lack the flexibility that is required to test a wide variety of machines and drives. Power hardware-in-the-loop (PHIL) testing presents a safe and adaptable solution to high power testing of electric machines. Traditionally, electric machines were primarily used in heavy industry such as milling, processing, and pumping applications. These applications, and other applications such as an electric motor in a car or plane are called motor drive systems. Regardless of the particular application of the motor drive system, there are generally three parts: a dc source, an inverter, and the electric machine. In most applications, other than cars which have a dc battery, the dc source is a power electronic converter called a rectifier which converts ac electricity from the grid to dc for the motor drive. Next, the motor drive converts the dc electricity from the first stage to a controlled ac output to drive the electric machine. Finally, the electric machine itself is the final piece of the electrical system and converts the electrical energy to mechanical energy which can drive a fan, belt, or axle. The fact that this motor drive system can be generalized and applied to a wide range of applications makes its study particularly interesting. PHIL simplifies testing of these motor drive systems by allowing the inverter to connect directly to a machine emulator which is able to replicate a variety of loads. Furthermore, this work demonstrates the capability of PHIL to emulate both the induction machine load as well as the dc source by considering several rectifier topologies without any significant adjustments from the machine emulation platform. This thesis demonstrates the capabilities of the EGSTON Power Electronics GmbH COMPISO System Unit to emulate motor drive systems to allow for safer, more flexible motor drive system testing. The main goal of this thesis is to demonstrate an accurate PHIL emulation of a induction machine and to provide validation of the emulation results through comparison with an induction machine.

The use of global positioning systems, or GPS, as a means of logistical organization for fleet vehicles has become more widespread in recent years. The system has the ability to track vehicle location, report on diagnostic trouble codes, and keep tabs on maintenance schedules. This helps to improve the safety and productivity of the vehicles and their operators. Additionally, the increasing use of yaw and roll stability control in commercial trucks has contributed to an increased level of safety for truck drivers. However, these systems require the vehicle to begin a yaw or roll event before they assist in maintaining control. This thesis presents a new method for utilizing the GPS signal in conjunction with a new fuzzy logic-based stability index, the Total Safety Margin (TSM), to create a superior active safety system. This thesis consists of four main components: An overview of GPS technology is presented with coverage of several automotive-based applications. The proposed implementation of GPS in the new Hardware-in-the-Loop (HIL) driving simulator under development at the Virginia Tech Center for Vehicle Systems and Safety (CVeSS) is presented. The three degree-of-freedom (3DOF), linear, single track equation set used in the Matlab simulations is derived from first principles. Matlab and TruckSim 7® simulations are performed for five vehicle masses and three forward velocities in a ramp-steer maneuver. Using fuzzy logic to develop the control rules for the Total Safety Margin (TSM), TSM matrices are built for both the Matlab and TruckSim 7® results based on these testing conditions. By comparing these TSM matrices it is shown that the two simulation methods yield similar results. A discussion of the development and implementation of the aforementioned HIL driving simulator is presented, specifically the steering subsystem. Using Matlab/Simulink, dSPACE ControlDesk, and CarSim RT® software it is shown that the steering module is capable of steering the CarSim RT® simulation vehicle accurately within the physical range of the steering sensor used. / Master of Science

For years the trend in the automotive industry has been toward more complex electronic control systems. The number of electronic control units (ECUs) in vehicles is ever increasing as is the complexity of communication networks among the ECUs. Increasing fuel economy standards and the increasing cost of fuel is driving hybridization and electrification of the automobile. Achieving superior fuel economy with a hybrid powertrain requires an effective and optimized control system. On the other hand, mathematical modeling and simulation tools have become extremely advanced and have turned simulation into a powerful design tool. The combination of increasing control system complexity and simulation technology has led to an industry wide trend toward model based control design. Rather than using models to analyze and validate real world testing data, simulation is now the primary tool used in the design process long before real world testing is possible. Modeling is used in every step from architecture selection to control system validation before on-road testing begins. The Hybrid Electric Vehicle Team (HEVT) of Virginia Tech is participating in the 2011-2014 EcoCAR 2 competition in which the team is tasked with re-engineering the powertrain of a GM donated vehicle. The primary goals of the competition are to reduce well to wheels (WTW) petroleum energy use (PEU) and reduce WTW greenhouse gas (GHG) and criteria emissions while maintaining performance, safety, and consumer acceptability. This paper will present systematic methodology for using model based design techniques for architecture selection, control system design, control strategy optimization, and controller validation to meet the goals of the competition. Simple energy management and efficiency analysis will form the primary basis of architecture selection. Using a novel method, a series-parallel powertrain architecture is selected. The control system architecture and requirements is defined using a systematic approach based around the interactions between control units. Vehicle communication networks are designed to facilitate efficient data flow. Software-in-the-loop (SIL) simulation with Mathworks Simulink is used to refine a control strategy to maximize fuel economy. Finally hardware-in-the-loop (HIL) testing on a dSPACE HIL simulator is demonstrated for performance improvements, as well as for safety critical controller validation. The end product of this design study is a control system that has reached a high level of parameter optimization and validation ready for on-road testing in a vehicle. / Master of Science

Today, the information (signal timings, detector extension, phase sequence, etc.) to install traffic lights on the street are obtained from traffic software simulations platforms, meaning that information from simulation is not tested on the field (intersection where it will be installed) before the installation. Many installed controllers on the street use time of day (TOD) patterns due to cheaper cost than adaptive traffic control systems, but that is not the best solution for traffic volume changes that can occur during the day or even a month. To improve traffic signal operation most of the traffic signal controllers in the same corridor or zone operate in coordination mode. Furthermore, phases need to be in coordination to achieve “green wave”. Green wave is term used when in corridor traffic lights allow continues flow of traffic through intersections that are coordinated. / Includes bibliography. / Thesis (M.S.)--Florida Atlantic University, 2016. / FAU Electronic Theses and Dissertations Collection