<p>U radu su istražene transformacije gradskog bloka tokom XX i početkom XXI veka. U cilju razumevanja ovih procesa i načina na koji arhitektonski sklopovi predstavljaju određene socijalne, društvene vrednosti kroz prostor, proučeni su različiti aspekti tih odnosa kao što su veze između određenih arhitektonskih i urbanističkih modela i društvenih okolnosti u kojima nastaju, kao i veze određenih modela življenja i prostornih sklopova kroz njihove uzore i tehnike nastajanja. Razumevanje odnosa između različitih prostornih nivoa, na vrstu i prirodu tranzicije između javnog, privatnog i kolektivnog, gde se gradski blok i njegove transformacije pojavljuju kao glavno mesto, polje tih odnosa čini značajan deo ovog rada.</p> / <p>This thesis explores the transformation of a urban block in the XX and at beginning XXI century. In order to understand these processes and the ways in which architectural assemblies represent certain social values through space, this thesis explores and identifies various aspects of these relations as links between specific architectural and urban models and social circumstances in which they occur, it also define relationship between certain models of living and spatial configarations through their ideals and techniques of becoming. Understanding the relationships between different spatial levels, the type and nature of the transition between the public, private and collective, where transformations of urban block apperes as the main place of these relationships is also important part of this thesis.</p>

The thesis describes the study of structure and dynamics of polymers in confined geometry. We study the finite size effect on the dynamics of non glassy and glassy polymers. Systematic measurement have been performed to address the issue of the possibility of entanglement and hence reptation dynamics of the polymer segments in confinement. The confinement effect on the glassy dynamics has been studied for Langmuir monolayers as well as for polymer nanoparticle hybrid systems. Slow and heterogeneous dynamics are the underlined observed behavior for dynamics in hybrid systems. The available theories explains the slowing down of the dynamics as the system is cooled from the liquid state in terms of increasing cooperative motion of the molecules. The size of the cooperative region is predicted to grow with reducing temperature. Experiments, theories and simulation in confined dimensions have been motivated to detect this length scale of the cooperatively rearranging region. The surface and interface effects on glass transition were studied using measurements based on modulated differential scanning calorimetry and small angle X ray scattering techniques. The dynamical heterogeneity in glassy polymers were studied using advanced X ray photon correlation spectroscopy techniques. Our studies presented in this thesis are also an small step to contribute to the existing experimental results on studying the surface, interface and finite size effects on the morphology and dynamics of confined systems. These effects were studied for, firstly ultra thin Langmuir monolayers and secondly polymer nanoparticle hybrid systems. In Chapter 1, we provide the theoretical background along with brief review of the literature for understanding the results presented in this thesis. The details of the experimental set up and their operating principle along with the details of the experimental conditions are provided in Chapter 2. In Chapter 3 we presents our experimental results on surface morphology and surface dynamics in ultra thin Langmuir monolayer of polymers. Chapter 4 and Chapter 5 discusses the result based on polymer nanoparticle hybrid systems. We provide the summary of our result and the future prospective of the work in Chapter 6. In appendix we have shown the complete derivation of the equation used in Chapter 3 for understanding the surface morphology of Langmuir monoalyers on water surface. Chapter 1 provides in detail the introduction to several aspects related with the dynamics of both glassy and non glassy polymers in confinement. It starts with brief introduction to structure and dynamics of polymers in bulk. In the next section we discuss the macroscopic viscoelastic behavior of materials followed by a very brief discussion on the common techniques used for such measurement. Further it discusses the theory and several available models present in literature to understand the dynamics of glass transition. This section is followed by discussion on surface and interface effects on structure and dynamics of such systems in confinement. Towards the end of this chapter we discuss the universal behavior of slow dynamic observed in soft glassy materials. Chapter 2 contains the details of the experimental techniques which has been used for the study. Brief introduction to basic principles of the measurements followed by details of the material and methods have been provided. The surface morphology and dynamics of Langmuir monolayer of polymers confined at air water interface, under compressive mechanical strain has been discussed in Chapter 3. The results presented for surface morphology are based on the studies using the combination of in situ grazing angle incidence small angle X ray scattering and ex situ atomic force microscopy measurements on monolayers transfered on silicon substrate. The issue of the presence of reptation motion in confinement has been addressed by performing systematic measurements as a function of surface concentration and molecular weight at fixed temperature. The glassy dynamical behavior has been studied on different glassy polymer layer as a function of surface concentration and temperature. In Chapter 4 we show the glass transition behavior of polymer nanoparticle (PMMA gold) hybrid system based on thermal measurements. This chapter discusses the role of the existence of a length scale in deciding the dynamics of the glass transition temperature of polymers. The confinement effect was tuned by the variation of the inter particle spacing between the nanoparticles in the polymer matrix. It also discusses the model to understand the observed behavior of the glass transition temperature in terms of the tunability of the polymer particle interface and the effect of the interface morphology on the dynamics of glass transition temperature. Chapter 5 is about the study of dynamics of polymer nanocomposites near glass transition as a function of temperature, wave vector and volume fraction of gold nanoparticles using X ray photon correlation spectroscopy. Based on our experimental results , we provide a phase diagram for dynamics in 2D space of temperature, wave vector and volume fraction for our PMMA gold nanoparticle hybrid samples. Chapter 6 contains the summary and the future perspective of the work presented.

This dissertation contains two significant investigations. One is the development of the broadband microwave bandpass filters with high out-of-band performance. The other is the development of low-loss hybrids. These researches are parts of the National Aeronautic and Space Administrator (NASA)s mission to explore the universe. The former is focused on the techniques used in microstrip line bandpass filter design that help achieving both low in-band insertion loss and high out-of-band attenuation level. Moreover, these filters achieve very broadband out-of-band attenuation bandwidth. These techniques are related to the improvement of stepped impedance resonators, coupling between resonators and effective methods to allocate transmission zeros to suppress filters out-of-band spurious responses. The later is focused on the techniques used in planar magic-T designs such that the developed magic-T obtains high isolation between port E (difference port) and port H (sum port). Moreover, it obtains low-loss and broadband characteristics. These techniques are related to the development of the low-loss broadband microstrip-toslotline (MS-to-SL transition and the magic-T with a highly symmetric structure. The theoretical analysis and experimental measurements have been performed. The experimental results of both the filter and magic-T researches show significant improvement over their prior state-of-the-art designs by number of magnitude. The designs also reduce fabrication complexity.

The genus Quercus L. is represented with more than 400 species in the world and 18 of these species are found naturally in Turkey. Although its taxonomical, phytogeographical and dendrological importance, the genus Quercus is still taxonomically one of the most problematical woody genus in Turkish flora. In this study, multivariate morphometric approach was used to analyze oak specimens collected from an isolated forest (Beynam Forest, Ankara) where Quercus pubescens Willd., Q. infectoria Olivier subsp. boissieri (Reuter) O. Schwarz and Q. macranthera Fisch. &amp / C. A. Mey. ex Hohen. subsp. syspirensis (C.Koch) Menitsky taxa are belonging to section Quercus sensu stricto (s.s.) are found. Additional oak specimens were included in the analysis for comparison. Morphometric study was based on 52 leaf characters such as, distance, angle, and area as well as counted, descriptive and calculated variables. Morphometric variables were calculated automatically by use of landmark and outline data. Random forest classification method was used to select discriminating variables and predict unidentified specimens by use of pre-identified training group. The results of the random forest variable selection procedure and the principal component analysis (PCA) showed that the morphometric variables could distinguish the specimens of Q. pubescens and Q. macranthera subsp. syspirensis mostly based on the overall leaf size and number of intercalary veins while the specimens of Q. infectoria subsp. boissieri were separated from others based on lobe and lamina base shape. Finally, micromorphological observations of abaxial lamina surface have been performed by scanning electron microscope (SEM) on selected specimens which were found useful to differentiate, particularly the specimens of Q. macranthera subsp. syspirensis and its putative hybrids from other taxa.

No description available.

The thesis presents the design and analysis of a Twin Tensioner for a Belt-driven Integrated Starter-generator (B-ISG) system. The B-ISG is an emerging hybrid transmission closely resembling conventional serpentine belt drives. Models of the B-ISG system's geometric properties and dynamic and static states are derived and simulated. The objective is to reduce the magnitudes of static tension in the belt for the ISG-driving phase. A literature review of hybrid systems, serpentine belt drive modeling and automotive tensioners is included. A parametric study evaluates tensioner parameters with respect to their impact on static tensions. Design variables are selected from these for an optimization study. The optimization uses a genetic algorithm (GA) and a hybrid GA. Results of the optimization indicate the optimal system contains spans with static tensions that are significantly lower in magnitude than that of the original design. Implications of the research on future work are discussed in closing.

The thesis presents the design and analysis of a Twin Tensioner for a Belt-driven Integrated Starter-generator (B-ISG) system. The B-ISG is an emerging hybrid transmission closely resembling conventional serpentine belt drives. Models of the B-ISG system's geometric properties and dynamic and static states are derived and simulated. The objective is to reduce the magnitudes of static tension in the belt for the ISG-driving phase. A literature review of hybrid systems, serpentine belt drive modeling and automotive tensioners is included. A parametric study evaluates tensioner parameters with respect to their impact on static tensions. Design variables are selected from these for an optimization study. The optimization uses a genetic algorithm (GA) and a hybrid GA. Results of the optimization indicate the optimal system contains spans with static tensions that are significantly lower in magnitude than that of the original design. Implications of the research on future work are discussed in closing.

The objectives of work presented in this thesis are to understand droplet and particle formulation processes in order to make useful polymer-polymer hybrids in aqueous dispersions and use our fundamental understanding of these processes to: 1. Improve monomer conversion as much as possible. 2. Understand impact of these processes on hybrid film properties. Specific case studies of interest under commercially feasible conditions (i.e. solids content of 50wt %) were done based on two systems namely alkyd-acrylic and polyurethane-acrylic. Miniemulsification, miniemulsion polymerisation and characterisation of hybrid latex, chemical incorporation of alkyd and polyurethane to acrylic monomers were studied in detail. We have been able to successfully synthesise and characterise hybrid latex of about 100nm in particle diameter and high solids content (50wt %) to be used in coating and adhesive applications

Les matériaux hybrides organique/inorganiques ont reçu beaucoup d'attention ces dernières années dans les études des nanomatériaux. En effet, ils possèdent des propriétés physiques et chimiques uniques grâce aux effets synergiques de chaque composant. En particulier, les nanoparticules de silice (SiO2) présentent des caractéristiques intéressantes, comme une bonne stabilité chimique et thermique. Elles peuvent être préparées de différentes tailles et peuvent aussi être facilement fonctionnalisées. Les polymères conducteurs intrinsèques comme le polythiophène et la polyaniline (PANI) peuvent exister sous différents états d'oxydation et donc répondre à des stimuli extérieurs en changeant une de leur caractéristique (couleur, conductivité, etc…). La PANI est un polymère non-toxique, thermiquement stable et peu coûteux avec une conductivité relativement élevée qui a été utilisée comme film antistatique, matériel d'électrode, inhibiteur de corrosion et comme surface sensible de capteur. Depuis la découverte des polymères conducteurs en 1977, plusieurs travaux ont été effectués sur la préparation, la caractérisation et les applications de films polymériques construits à la surface de matériaux comme la silice. Parmi les différents types de composites existants, les particules de type cœur@coquille composées d’un cœur inorganique et d’une couronne de polymère sont les plus prometteurs. Dans cette étude, nous avons donc décidé de travailler sur la synthèse de composites cœur@coquille constitués d’une coquille de PANI et d’un cœur de particules de silice.Dans la littérature, en utilisant des protocoles expérimentaux similaires, deux morphologies très contradictoires ont été obtenues après la polymérisation par oxydation chimique d'aniline en présence de particules de silice : cœur@coquille et framboise (structure inversée avec la PANI comme cœur). Nous avons alors décidé de réexaminer la synthèse de PANI en présence de particules de silice. Pour cela, nous avons, dans un premier temps, synthétisé des particules de silice monodisperses de différentes tailles (300, 160 et 90 nm) par procédé Stöber. Nous avons ensuite réalisé la polymérisation chimique de l'aniline en présence de ces particules de silice dans des conditions contrôlées afin de promouvoir une adsorption des ions aniliniums en surface des particules. Différents paramètres expérimentaux ont été étudiés tels que la température, la concentration en réactifs, la taille des particules… Les résultats en termes de morphologie sont discutés en fonction de ces paramètres. Dans un second temps, nous avons fonctionnalisé la surface des particules de silice par un alcoxysilane afin de favoriser la polymérisation de l’aniline à la surface des particules. Ainsi, nous avons obtenu des structures SiO2@PANI avec une épaisseur de polymère contrôlable. La dernière partie de ce travail traite des premiers essais qui ont été réalisés afin d’utiliser ces composites SiO2@PANi pour des applications environnementales. Deux applications ont notamment été envisagées, l'adsorption de métaux pour l'aspect de particule et la détection de gaz pour les capacités conductrices de la PANI. / Organic/inorganic hybrid materials have received much attention in recent years such as in the field of nano-materials. Indeed, these materials possess unique physical and chemical properties due to the synergistic effect of both components. In particular, silica nanoparticles (SiO2) present interesting properties, such as good chemical and thermal stabilities. They can be prepared in different size and can be easily chemically modified. Intrinsically conducting polymers such as polythiophene and polyaniline (PANI) can exist in different oxidation states and respond to external stimuli by changing one of their characteristics (color, conductivity, …). PANI is a non-toxic, thermally stable and low cost polymer with relatively high conductivity that has been used as antistatic coating, electrode materials, corrosion inhibitor and active layer of sensors. Since the discovery of conducting polymer in 1977, several works have been carried out on the preparation, characterization and applications of polymeric films build on various surfaces like silica. Among the different kinds of composites that exist, inorganic-polymer core-shell nanoparticles are more promising candidates. In this study, we decided to work on the synthesis of core@shell hybrid compounds based on PANI shells and silica nanoparticles cores.In the literature, using similar experimental protocols, two morphologies have been obtained after chemical polymerization of aniline in the presence of silica particles: core@shell and raspberry (inverted structure with PANI as core). We thus decided to reinvestigate the synthesis of PANI in the presence of silica particles. For this, we first synthesized silica particles with different sizes by Stöber process. We then performed the chemical polymerization of aniline in the presence of these naked silica particles under different conditions: temperature, concentration of reactive. However, in all cases, we never managed to obtain core@shell structures. Finally, we succeed in developing a method to prepare these core@shell particles which relies on the functionalization of the SiO2 by alkoxysilanes followed by the polymerization of aniline at room temperature. A series of core-shell particles with tunable PANI thickness has been prepared by this method. The last part of this work deals with the first tests that have been carried out in order to use these composites SiO2@PANi for environmental applications. Two applications have been considered, the adsorption of metals for the particle appearance and the detection of gas for the conductive capacities of the PANI.

This thesis represents an initial stage of a study focused on vegetative propagation of \kur{Paphiopedilum} species \kur{in vitro}. The aim of the study is to assess various concetration of TDZ in media and conditions of cultivation for the vegetative propagation of selected \kur{Paphiopedilum} species \kur{in vitro}. This work contains a review of botanical characteristics of the species used, the description of methods, the design, results and discussion of two preliminary experiments.