No description available.

Submitted in fulfillment of the academic requirements for the Masters Degree in Technology: Chemistry, Durban University of Technology, 2008. / The thermodynamic properties of binary liquid mixtures involving ionic liquids (ILs) with alcohols were determined. ILs are an important class of solvents since they are being investigated as environmentally benign solvents, because of their negligible vapour pressure, and as potential replacement solvents for volatile organic compounds (VOCs) currently used in industries. Alcohols were chosen for this study because they have hydrogen bonding and their interaction with ILs will help in understanding the intermolecular interactions. Also, their thermodynamic properties are used for the development of specific chemical processes. The excess molar volumes of binary mixtures of {1-ethyl-3-methylimidazolium ethylsulfate + methanol or 1-propanol or 2-propanol}, {trioctylmethylammonium bis (trifluoromethyl-sulfonyl) imide + methanol or ethanol or 1-propanol}, {1-buty-3-methylimidazolium methylsulfate + methanol or ethanol or 1-propanol} were calculated from experimental density values, at T = (298.15, 303.15 and 313.15) K. The Redlich-Kister smoothing polynomial was fitted to the excess molar volume data. The partial molar volumes of the binary mixtures {1-ethyl-3-methylimidazolium ethylsulfate + methanol or 1-propanol or 2-propanol}, {trioctylmethylammonium bis (trifluoromethyl-sulfonyl) imide + methanol or ethanol or 1-propanol}, {1-buty-3-methylimidazolium methylsulfate + methanol or ethanol or 1-propanol} were calculated from the Redlich-Kister coefficients, at T = (298.15, 303.15 and 313.15) K. This information was used to better understand the intermolecular interactions with each solvent at infinite dilution. iii The isentropic compressibility of {trioctylmethylammonium bis (trifluoromethyl-sulfonyl) imide + methanol or ethanol or 1-propanol}, were calculated from the speed of sound data at T = 298.15 K.

In order to reduce the amount of pollution that is generated by burning fossil fuels alternative energy sources should be explored. Hydrogen has been identified as the most promising replacement for fossil fuels and can be produced by using the Hybrid Sulphur (HyS) cycle. Currently the SO2/O2 separation step in the HyS process has a large amount of knock out drums. The aim of this study was to investigate new technology to separate the SO2 and O2. The technology that was identified and investigated was to separate the SO2 and O2 by absorbing the SO2 into an ionic liquid. In this study the maximum absorption, absorption rate and desorption rate of SO2 from the ionic liquid [BMIm][MeSO4] with purities of 95% and 98% was investigated. These ionic liquid properties were investigated for pure O2 at pressures ranging from 1.5 to 9 bar(a) and for pure SO2 at pressures from 1.5 to 3 bar(a) at ambient temperature. Experiments were also carried out where the composition of the feed-stream to the ionic liquid was varied with compositions of 0, 25, 50, 75 and 100 mol% SO2 with O2 as the balance. For each of these compositions the temperature of the ionic liquid was changed from 30oC to 60oC, in increments of 10oC. The absorption rate of SO2 in the ionic liquid increased when the mole percentage SO2 in the feed stream was increased. When the temperature of the ionic liquid was decreased the maximum amount of SO2 that the ionic liquid absorbed increased dramatically. However, the absorption rate was not influenced by a change in the absorption temperature. The experimental results for the maximum SO2 absorption were modelled with the Langmuir absorption model. The model fitted the data well, with an average standard deviation of 17.07% over all the experiments. In order to determine if the absorption reaction was endothermic or exothermic the Clausius-Clapeyron equation was used to calculate the heat of desorption for the desorption step. The heat of desorption data indicated that the desorption of SO2 from this ionic liquid was an endothermic reaction because the heat of desorption values was positive. Therefore the absorption reaction was exothermic. From the pressure-change experiments the results showed that the mole percentage of O2 gas that was absorbed into the ionic liquid was independent of the pressure of the O2 feed.On the other hand, there was a clear correlation between the mole percentage SO2 that was absorbed into the ionic liquid and the feed pressure of the SO2. When the feed pressure of the SO2 was increased the amount of SO2 absorbed also increased, this trend was explained with Fick’s law. In the study the effect of the ionic liquid purity on the SO2 absorption capacity was investigated. The experimental results for the pressure experiments showed that the 95% and 98% pure ionic liquid absorbed about the same amount of SO2. During the temperature experiments the 95% pure ionic liquid absorbed more SO2 than the 98% pure ionic liquid for all but two of the experiments. However the 95% pure ionic liquid also absorbed small amounts of O2 at 30 and 40oC which indicated that the 95% pure ionic liquid had a lower selectivity than the 98% pure ionic liquid. Therefore, the 95% pure ionic liquid had better SO2 absorption capabilities than the 98% pure ionic liquid. These result showed that the 98% pure ionic liquid did not absorb more SO2 than the 95% pure ionic liquid, but it did, however, show that the 98% pure ionic liquid had a better selectivity towards the SO2. Hence, it can be concluded that even with the O2 that is absorbed it would be economically more advantageous to use the less expensive 95% pure ionic liquid rather than the expensive 98% pure ionic liquid, because the O2 would not influence the performance of the process negatively in such low quantities. / Thesis (MIng (Chemical Engineering))--North-West University, Potchefstroom Campus, 2013

In order to reduce the amount of pollution that is generated by burning fossil fuels alternative energy sources should be explored. Hydrogen has been identified as the most promising replacement for fossil fuels and can be produced by using the Hybrid Sulphur (HyS) cycle. Currently the SO2/O2 separation step in the HyS process has a large amount of knock out drums. The aim of this study was to investigate new technology to separate the SO2 and O2. The technology that was identified and investigated was to separate the SO2 and O2 by absorbing the SO2 into an ionic liquid. In this study the maximum absorption, absorption rate and desorption rate of SO2 from the ionic liquid [BMIm][MeSO4] with purities of 95% and 98% was investigated. These ionic liquid properties were investigated for pure O2 at pressures ranging from 1.5 to 9 bar(a) and for pure SO2 at pressures from 1.5 to 3 bar(a) at ambient temperature. Experiments were also carried out where the composition of the feed-stream to the ionic liquid was varied with compositions of 0, 25, 50, 75 and 100 mol% SO2 with O2 as the balance. For each of these compositions the temperature of the ionic liquid was changed from 30oC to 60oC, in increments of 10oC. The absorption rate of SO2 in the ionic liquid increased when the mole percentage SO2 in the feed stream was increased. When the temperature of the ionic liquid was decreased the maximum amount of SO2 that the ionic liquid absorbed increased dramatically. However, the absorption rate was not influenced by a change in the absorption temperature. The experimental results for the maximum SO2 absorption were modelled with the Langmuir absorption model. The model fitted the data well, with an average standard deviation of 17.07% over all the experiments. In order to determine if the absorption reaction was endothermic or exothermic the Clausius-Clapeyron equation was used to calculate the heat of desorption for the desorption step. The heat of desorption data indicated that the desorption of SO2 from this ionic liquid was an endothermic reaction because the heat of desorption values was positive. Therefore the absorption reaction was exothermic. From the pressure-change experiments the results showed that the mole percentage of O2 gas that was absorbed into the ionic liquid was independent of the pressure of the O2 feed.On the other hand, there was a clear correlation between the mole percentage SO2 that was absorbed into the ionic liquid and the feed pressure of the SO2. When the feed pressure of the SO2 was increased the amount of SO2 absorbed also increased, this trend was explained with Fick’s law. In the study the effect of the ionic liquid purity on the SO2 absorption capacity was investigated. The experimental results for the pressure experiments showed that the 95% and 98% pure ionic liquid absorbed about the same amount of SO2. During the temperature experiments the 95% pure ionic liquid absorbed more SO2 than the 98% pure ionic liquid for all but two of the experiments. However the 95% pure ionic liquid also absorbed small amounts of O2 at 30 and 40oC which indicated that the 95% pure ionic liquid had a lower selectivity than the 98% pure ionic liquid. Therefore, the 95% pure ionic liquid had better SO2 absorption capabilities than the 98% pure ionic liquid. These result showed that the 98% pure ionic liquid did not absorb more SO2 than the 95% pure ionic liquid, but it did, however, show that the 98% pure ionic liquid had a better selectivity towards the SO2. Hence, it can be concluded that even with the O2 that is absorbed it would be economically more advantageous to use the less expensive 95% pure ionic liquid rather than the expensive 98% pure ionic liquid, because the O2 would not influence the performance of the process negatively in such low quantities. / Thesis (MIng (Chemical Engineering))--North-West University, Potchefstroom Campus, 2013

Ellipticine (EPT), a natural plant polyphenolic compound, has long been known for its significant anticancer and anti-HIV activities. Recent study on its photophysical properties has revealed that ellipticine has three molecular states: protonated, neutral and crystalline. Further in vitro cytotoxicity tests indicated that protonated ellipticine exhibited much higher anticancer activity than the other two states. To maximize drug therapeutic effect, a small library of ariginine-rich ionic complementary peptides derived from EAK, including EAR8-II, EAR8-a, ELR8-a, and EAR16-II, were investigated as a potential carrier to deliver prescribed protonated ellipticine for treatment of cancer. Fluorescence study demonstrated that all four peptides were able to solubilize and stabilize protonated ellipticine in aqueous solution at 5:1 mass ratio of peptide-to-ellipticine (0.5: 0.1 mg/mL) even upon 4000 times dilution. Physicochemical characteristics of peptides self-assemblies and peptide-ellipticine complexes such as particle size, surface charge, secondary structure and morphology were determined by dynamic light scattering (DLS), zeta potential, circular dichroism (CD) , atomic force microscopy (AFM) and transmission electron microscopy (TEM), respectively. Then the ellipticine maximum suspension was determined by ellipticine UV-absorption. With the help of the peptides and mechanical stirring overtime, up to 100% ellipticine could be uptaken and stabilized in the solution as protonated ellipticine. In vitro cytotoxicity tests indicated that the peptides were demonstrating significant biocompatibility without affecting the survival of two cancer cell lines, human lung carcinoma cell line A549 and breast cancer cell line MCF-7, whereas the complexes with protonated ellipticine were found to show great anticancer activity to the two cancer cell lines. The IC50 values were obtained for each of four different peptide-ellipticine complexes ranged from 0.36±0.12 to 18.90±0.46 μM. It is worth noting that the IC50 value of EAR16-ellipticine complex to MCF-7 was over 50 times higher than that one to A549, which presented that EAR16-ellipticine complex has a selective targeting activity to A549, with the lowest IC50 value of 0.36±0.12 μM among all four complexes. Such a result indicated that this library of novel arginine-rich ionic complementary peptides had a great potential to encapsulate prescribed protonated ellipticine and exhibited an excellent anticancer activity upon serial dilution in aqueous solution. Overall, the charge distribution and increased hydrophobicity of the short (8 amino acids length) peptides seemed not to affect the complex formation and its therapeutic efficacy in vitro; however, the increase in length of the peptides significantly altered the nanostructure of peptides and its complexation with ellipticine, increased the therapeutic efficacy of EAR16-EPT to A549. This work provides essential information for peptide sequence design in the development of self-assembling peptide-based delivery of hydrophobic anticancer drugs.

A multidisciplinary approach has been applied to the development of sustainable technologies for three industrially relevant projects. Reversible ionic liquids are novel carbon dioxide capture solvents. These non-aqueous silylamines efficiently capture carbon dioxide through chemical and physical absorption and release carbon dioxide with minimal addition of heat. The development of these capture agents aims to eliminate the need for a co-solvent, while minimizing energy loss and achieving solvent recyclability. Also presented is the use of carbon dioxide for amine protection during chemical syntheses. Amine protection is widely used in almost all sectors of chemical and pharmaceutical industries. The use of carbon dioxide as a reversible protecting group reduces solvent waste during protection and deprotection and improves the atom economy of existing processes. Sustainable chemistry has also been applied to the use of reversible ionic liquids as switchable surfactants for nanoparticle synthesis. The reversible ionic liquid system offers two significant advantages toward a more efficient synthesis and deposition of nanoparticles in that an additional surfactant is not required, and due to the reversible nature of the ionic liquids, a facile and waste-reduced deposition method exists.

Environmental and economic factors demand radical advances in solar cell technologies. Organic and polymer photovoltaics emerged in the 1990's that have led to low cost per unit area, enabled in significant part by the convenient manufacturing of roll-to-roll-processible solution-cast semiconductors. Colloidal quantum dot solar cells dramatically increase the potential for solar conversion efficiency relative to organics by enabling optimal matching of a photovoltaic device's bandgap to the sun's spectrum. Infrared-absorbing colloidal quantum dot solar cells were first reported in 2005. At the outset of this study in 2007, they had been advanced to the point of achieving 1.8% solar power conversion efficiency. These devices degraded completely within a few hours’ air exposure. The origin of the extremely poor device stability was unknown and unstudied. The efficiency of these devices was speculated to be limited by poor carrier transport and passivation within the quantum dot solid, and by the limitations of the Schottky device architecture. This study sought to tackle three principal challenges facing colloidal quantum dot photovoltaics: stability; understanding; and performance. In the first part of this work, we report the first air-stable infrared colloidal quantum dot photovoltaics. Our devices have a solar power conversion efficiency of 2.1%. These devices, unencapsulated and operating in an air atmosphere, retain 90% of their original performance following 3 days’ continuous solar harvesting. The remarkable improvement in device stability originated from two new insights. First, we showed that inserting a thin LiF layer between PbS film and Al electrode blocks detrimental interfacial reactions. Second, we proposed and validated a model that explains why quantum dots having cation-rich surfaces afford dramatically improved air stability within the quantum dot solid. The success of the cation-enrichment strategy led us to a new concept: what if - rather than rely on organic ligands, as all prior quantum dot photovoltaics work had done - one could instead terminate the surface of quantum dots exclusively using inorganic materials? We termed our new materials strategy ionic passivation. The goal of the approach was to bring our nanoparticles into the closest possible contact while still maintaining quantum confinement; and at the same time achieving a maximum of passivation of the nanoparticles' surfaces. We showcase our ionic passivation strategy by building a photovoltaic device that achieves 5.8% solar power conversion efficiency. This is the highest-ever solar power conversion efficiency reported in a colloidal quantum dot device. More generally, our ionic passivation strategy breaks the past tradeoff between transport and passivation in quantum dot solids. The advance is relevant to electroluminescent and photodetection devices as well as to the record-performing photovoltaic devices reported herein.

Studies of gas-phase ionic clusters have become an integral component in understanding microsolvation and catalysis by transition metal cations. Further interest in this field is due to the possibility of bridging the gap between the condensed and gas phases by developing our understanding of clusters and the possibility that small clusters can have unique chemical and catalytic properties. Most gas phase studies have focused on singly charged ions. Electrospray allows for the production of multiply charged ions solvated by a few solvent molecules. Understanding smaller reactive species such as metal centered clusters with well-defined, gas phase conditions also allows for detailed comparison between theory and experiments. In these studies the main focus is to understand bond activation by transition metal cations and solvation of transition metal dications. The gas phase ions of interest are studied using an electrospray-ionization or laser-ablation dual time-of-flight mass spectrometer and are characterized using photofragment spectroscopy in the visible and ultraviolet regions of the spectrum. Photofragment spectroscopy is a powerful method that can be used in gas phase studies to gather a wealth of information on the ions' bond strengths, spectroscopic constants, and dissociation kinetics and dynamics. The study of TiO + (CO 2 ) spectroscopy (Chapter 3) was a result of study of CO 2 bond activation by Ti + that went on to provide a wealth of information on the spectroscopy and dissociation kinetics of this molecule. An electronic transition of the TiO + chromophore was observed, 2 Π[arrow left] 2 Δ, revealing new information about the excited state and the effect of TiO + electronic state on the metal- CO 2 ligand interaction. The photodissociation spectrum of this molecule is well resolved and shows progressions in the covalent Ti-O stretch and metal-ligand stretch and rock. The lifetime of electronically excited TiO + (CO 2 ) was measured, and depends strongly on vibrational energy. Calculations on TiO + and TiO + (CO 2 ) were combined with experimental results on TiO + (CO 2 ) to predict spectroscopic transitions of TiO + , an astrophysically interesting molecule. The photodissociation dynamics of M 2+ (CH 3 CN)n(H 2 O)m where M = Co and Ni, (Chapter 4) is important in understanding the gas phase microsolvation of metal dications. The coordination number and type of solvent affect the dissociation pathways. M 2+ (CH 3 CN)n (n>2) primarily lose a solvent molecule. Electron transfer is a minor channel for n=3 and is the only channel observed for n=2. Mixed clusters M 2+ (CH 3 CN)n(H 2 O)m preferentially lose water. Loss of acetonitrile is a minor channel, as is proton transfer. Water is the proton donor. Replacing acetonitrile with water increases the proton transfer channel. Nickel and cobalt complexes show similar dissociation dynamics, with proton transfer more likely for nickel complexes. Methane activation by transition metal catalysts is industrially important as it can be used to produce gasoline from natural gas. We studied the products and intermediates of the reaction of laser-ablated platinum atoms with methane (Chapter 5). Photoionization efficiency curves were measured for PtCH 2 and the [H-Pt-CH 3 ] insertion intermediate using tunable vacuum ultraviolet light. The resulting ionization energies were combined with bond strengths for the cations to derive bond strengths for the neutrals. These were used to construct a potential energy surface for methane activation by platinum atoms.

Die Systeme CuBiQX (Q = S, Se; X = Cl, Br, I) konnten um zahlreiche Verbindungen erweitert werden. Den meisten dieser Materialien ist ein rigides Netzwerk der Anionenpolyeder um die Bismutkationen gemein. Der Majorität der Verbindungen ist außerdem zumindest eine lokale Beweglichkeit der Kupfer(I)-Ionen immanent. Diese konnte sowohl mittels isotroper Verfeinerungen als auch durch harmonisch und anharmonisch verfeinerte und mittels JPDF zusammengefasste Elektronendichten nachgewiesen werden. Hieraus waren Berechnungen der Potentiale, der Potentialbarrieren und deren Fehler möglich.

Thesis (Ph.D.)--University of Wollongong, 2007. / Typescript. Includes bibliographical references.