The thesis work shows the implementation of sensing and communication, so a basic knowledge of analog and digital communication systems is needed to understand this paper Background. With the increase in smart devices, the bandwidth requirements are increased, which created congestion in the radio spectrum resources. To overcome this spectrum congestion, Integrated Sensing and Communication (ISAC) can be used. This can be achieved by using Orthogonal Frequency-Division Multiplexing (OFDM) signals. In ISAC, both sensing and communication use the same resources,which in turn predominantly improves the efficiency of the spectrum resources usage and reduces the cost of hardware. Objectives. The main aim of this research is to integrate radar sensing and communication using Software Defined Radios (SDR) and GNU Radio. The goal is to design a signal waveform and a receiver algorithm supporting both sensing and communications and then carry out experiments on an SDR unit to evaluate the functionality and performance. Methods. Experimentation is used in this research and is conducted at Ericsson Research Laboratory. The experiment is divided into three major parts. First, to test the sensing functionalities using Frequency Modulated Continuous Waves (FMCW). Second, to test the communication functionalities using OFDM signals. Third, to design the receiver algorithm and signal waveform for ISAC. To verify the dual functional paradigm, the results from the ISAC are compared with the individual test results of sensing and communications using FMCW and OFDM signals. Results. A receiver algorithm is designed to calculate the sensing range and BER of ISAC using an SDR. The results show the possibility of implementing ISAC using OFDM in GNU Radio with SDR. The thesis project can also be viewed as a proof of concept for ISAC on SDR, helping in providing useful information related to radar sensing and communication using OFDM and performance evaluation. Conclusions. The experimental results show the dual-functional waveform for ISAC, helping in the evolution of 5G and beyond 5G communication systems. The identified drawbacks can be used by future researchers working on advanced 5G mobile communication systems to develop more efficient systems. Keywords: Communications, FMCW, GNU Radio, ISAC, OFDM, SDR, Sensing.

<p> In nuclear astrophysics, there are still undiscovered areas involving unstable nuclei, like the nucleosynthesis in exploding stars. The unstable nuclei are extremely difficult to produce in the laboratory for study since they decay away quickly once they are formed. To make the unstable nuclei available in the laboratory, Canada has built one of the best facilities in the world for nuclear astrophysics studies with radioactive beams, called TRIUMF-ISAC. Its recent upgrade to ISAC-2 can produce even heavier radioactive beams with higher energy. To fully utilize the ISAC-2 facility, a high-segmented HPGe γ-ray detector-TIGRESS, has been developed to study exotic nuclei using the well-established technique of Coulomb Excitation.</p> <p> As an essential part of the TIGRESS facility, auxiliary detectors, such as silicon detectors, are used to improve the sensitivity of the experiments through Doppler correction. Two types of silicon detectors will be used. One is the CD-shaped double-sided silicon strip detector, which is the topic of this thesis. The other one is the silicon barrel detector. This thesis will discuss the computer simulations and experimental tests of the CD detector.</p> <p> Simulations were made using a simulation toolkit GEANT4, which was run under the Linux system. The goal was to test the hypothesis that measurements of the energies of heavy ions in Coulomb excitation may improve the Doppler correction by constraining the scattering location in a thick target. To test the performance of the simulated CD detector, simple simulations were performed for shooting calibration alpha particles from an 241Am source first directly onto the CD and second through a thin target onto the CD. The goal of additional simulations was to attempt to determine the corresponding scattering depth in a thick target by putting an energy cut on the spectrum of the scattered beam detected in the CD. These simulation results verify the possibility of such localization, though the resolution is not very good.</p> <p> Experimental tests for the CD detector are aimed to obtain the energy resolution for each strip element of the CD and to have at least 8 channels instrumented in our test lab before this detector is sent to TIGRESS facility. The test station including electronics and detector systems and all results from initial tests are described in detail in this thesis.</p> / Thesis / Master of Science (MSc)

The Master's thesis Transformation of the microprocessor's description language to the hardware description language is aimed at design of application specific microprocessors with using ISAC language. It deals with design and implementation of transformation which converts description of microprocessor in ISAC language into equivalent description in VHDL language. The chapter Summary of research problems describes chosen problems, showing up some notions connected with problems and presents suggestion of transformation mentioned above. The chapter Suggestion of solution presents new extension of ISAC language. There is also described the way of design solution of transformation and solution of implementation of VHDL generator which performs transformation. Conclusion of thesis discusses next points of future work reached results.

Charles University Faculty of Pharmacy in Hradec Králové Department of Biological and Medical Sciences Author: Bc. Petra Porubová Supervisor: prof. RNDr. Ctirad Andrýs, Ph.D. Title of diploma thesis: Allergic phenotypes in patients with respiratory allergy evaluated by microchip ISAC technique Key words: allergic inflammation, allergen specific IgE, component resolved diagnostics, microchip, ISAC Background: The aim of this diploma thesis was to evaluate the sensitization profile in the group of pacients with allergic rhinitis and/or bronhial asthma and to identify possible differences between patients with different disease severity. Methods: ImmunoCAP ISAC was used to determine specific IgE antibodies against 112 allergen components. The evaluated group included 152 patients (57.9 % women) from the allergology outpatient office of the Department of Clinical Immunology and Allergology, University Hospital Hradec Králové. Results: The most common allergens in this group of patients were the components Phl p 1 (68,4 %) and Bet v 1 (65,1 %). Differences in the number of positive and negative reactions were demonstrated between patients with different severity of allergic rhinitis. Correlations were found between the number of positive/negative reactions and the severity of bronchial asthma. And the...

This paper describes methods and procedures used for code analysis and transformation. It contains basic information of a science discipline called reverse engineering and its use in information technologies. The primary objective is a construction of a generic reverse compiler or decompiler, i.e. tool that can recompile from binary form (optionally from symbolic machine code) to a high level language. This operation is highly dependent on the concrete instruction set and processor architecture. This problem is solved with description of semantic of each instruction by a special language designed for this use. The output is the high level language code and is functionally equivalent to the input. The program is therefore able to work with each instruction set and code written by it can be transformed into the chosen high level language. This proposal is implemented in practice as a part of project Lissom. Generic decompiler is completely new idea. The thesis contains entirely new techniques from theory of compilers and optimizations made by the author.

Everyone is talking about the software development methods but these methods are categorised into the different parts and the most important are two categories, one is agile software development methods and second is using the traditional software development methods. Agile software methods are relatively considered to be quick and for the small teams. Our main mission is to check which method is better from each other, so for that purpose we go out in the software development market to meet the professional to ask about their satisfaction on these software development methods. Our research is based on to see the suitable method for the professionals; see the challenges on the adoptability of methods and which method is quicker. To perform this study we have gone through a survey questionnaire, and results are analysed by using mixed method approach. Results shows that professionals from both types of methods are satisfied but professionals with traditional methods are more satisfy with their methods with respect to development of quality software, whereas agile professionals are more satisfied with their methods with respect of better communication with their customers. With agility point of view, our study says that both methods have characteristics which support agility but not fully support, so in such case we need to customize features from both types of methodologies.

This work concerns about designing of communication protocol for generic processor simulator. The main objective of this work was to design a communication protocol which allows to simulate multiprocessor system on a cluster of computers.

This thesis describes the design of the universal assembler that represents a part of the Lissom project. You will be provided with the description of the assembler architectures and their usual tasks. Special attention is paid to GNU assembler. Designed assembler consists of the fixed and the generated part. The generated part is created automatically from the description of instruction set, that is defined using architecture and instructions set description language ISAC. Using this approach, it is possible to change assembler target architecture automatically. The second part of thesis describes the Parserlib2 library implementation that is a part of the Lissom project and provides the information about the target instruction set for an assembler generator.

This thesis is dealing with integration of available lexical analyzer generator tools and presents concept of parallel syntax analysis based on block-oriented syntax analysis. Results will be used during development of syntax-directed editor under Eclipse platform latter.

Analýza softwaru je metodologie, jejímž účelem je analyzovat chování daného programu. Jednotlivé metody této analýzy je možné využít i v dalších oborech, jako je zpětné inženýrství, migrace kódu apod. V této práci se zaměříme na analýzu strojového kódu, na zjištění nedostatků existujících metod a na návrh metod nových, které umožní rychlou a přesnou rekonfigurovatelnou analýzu kódu (tj. budou nezávislé na konkrétní cílové platformě). Zkoumány budou dva typy analýz - dynamická (tj. analýza za běhu aplikace) a statická (tj. analýza aplikace bez jejího spuštění). Přínos této práce v rámci dynamické analýzy je realizován jako rekonfigurovatelný ladicí nástroj a dále jako dva typy tzv. rekonfigurovatelného translátovaného simulátoru. Přínos v rámci statické analýzy spočívá v navržení a implementování rekonfigurovatelného zpětného překladače, který slouží pro transformaci strojového kódu zpět do vysokoúrovňové reprezentace. Všechny tyto nástroje jsou založeny na nových metodách navržených autorem této práce. Na základě experimentálních výsledků a ohlasů od uživatelů je možné usuzovat, že tyto nástroje jsou plně srovnatelné s existujícími (komerčními) nástroji a nezřídka dosahují i lepších výsledků.