abstract: The inexorable upsurge in world’s energy demand has steered the search for newer renewable energy sources and photovoltaics seemed to be one of the best alternatives for energy production. Among the various photovoltaic technologies that emerged, organic/polymer photovoltaics based on solution processed bulk-heterojunctions (BHJ) of semiconducting polymers has gained serious attention owing to the use of inexpensive light-weight materials, exhibiting high mechanical flexibility and compatibility with low temperature roll-to-roll manufacturing techniques on flexible substrates. The most widely studied material to date is the blend of regioregular P3HT and PC61BM used as donor and acceptor materials. The object of this study was to investigate and improve the performance/stability of the organic solar cells by use of inexpensive materials. In an attempt to enhance the efficiency of organic solar cells, we have demonstrated the use of hexamethyldisilazane (HMDS) modified indium tin oxide (ITO) electrode in bulk heterojunction solar cell structure The device studies showed a significant enhancement in the short-circuit current as well as in the shunt resistance on use of the hexamethyldisilazane (HMDS) layer. In another approach a p-type CuI hole-transport layer was utilized that could possibly replace the acidic PEDOT:PSS layer in the fabrication of high-efficiency solar cells. The device optimization was done by varying the concentration of CuI in the precursor solution which played an important role in the efficiency of the solar cell devices. Recently a substantial amount of research has been focused on identifying suitable interfacial layers in organic solar cells which has efficient charge transport properties. It was illustrated that a thin layer of silver oxide interfacial layer showed a 28% increase in power conversion efficiency in comparison to that of the control cell. The optoelectronic properties and morphological features of indium-free ZnO/Ag/MoOx electrodes was also studied. Organic solar cells on these composite electrodes revealed good optical and electrical properties, making them a promising alternative indium free and PEDOT:PSS-free organic solar cells. Lastly, inverted solar cells utilizing zinc oxide and yttrium doped zinc oxide electron transport was also created and their device properties revealed that optimum annealing conditions and yttrium doping was essential to obtain high efficiency solar cells. / Dissertation/Thesis / Doctoral Dissertation Chemistry 2015

Organische Leuchtdioden weisen, verglichen mit anorganischen Leuchtdioden, viele Vorteile auf. So sind sie nicht nur energiesparender, sondern können auch in neuen flexiblen Technologien verwendet werden. Um ihr volles Potenzial auszuschöpfen, können zusätzliche Schichten und neue Materialien hinzugefügt werden. Der Ersatz spröder Elektroden durch dünne Metallschichten kann OLEDs flexibler machen, Zwischenschichten verbessern den Ladungstransport und neuartige Materialien können die Lösungsprozessierung von OLEDs vereinfachen. In den Kapiteln dieser Arbeit wurden je ein Ansatz zur Steigerung der Leistung von OLEDs untersucht. Es wurden dünne Silberschichten aus einer partikelfreien Silbertinte mittels Tintenstrahldruck hergestellt und ihre optischen sowie elektrischen charakterisiert. Die gedruckten Elektroden zeigen eine hohe Biegefestigkeit, bei gleichbleibend guten elektrischen Eigenschaften. Die damit hergestellten Leuchtdioden übertreffen in ihrer Effizienz Referenzdioden mit Indium Zinn Oxid Elektroden. Um die Effizienz organischer Leuchtdioden weiter steigern zu können wurden anschließend Zwischenschichten untersucht. Mittels einer gemischten Schicht aus Zinkoxid und einem Polymer konnte die Effizienz von invertierten Leuchtdioden signifikant gesteigert werden. Weiterhin wurden zwei neu synthetisierte Moleküle dazu verwendet, um die Benetzung von Perowskiten auf Elektroden zu verbessern und somit ihre Herstellbarkeit mittels Tintenstrahldruck zu ermöglichen. Abschließend wurde das Quervernetzen von Polymeren zur Herstellung von Mehrschichtsystemen erforscht. Hierbei wird ein die Löslichkeit eines Polymers durch verschiedene Ansätze verringert. Anhand des lichtemittierenden Polymers Super Yellow wurde dies demonstriert. Die Beständigkeit einer Schicht aus Super Yellow gegenüber Toluol konnte erfolgreich stark erhöht werden. Somit wurde eine nachfolgende Prozessierung einer zusätzlichen Schicht aus demselben Lösungsmittel ermöglicht. / Organic light-emitting diodes have many advantages compared to their inorganic counterparts. Not only can they be used more energy-efficiently, but they can also be used in new, flexible technologies. To reach their full potential, additional layers and new materials can be added. Replacing brittle electrodes with thin metal layers can make OLEDs more flexible, intermediate layers improve charge transport, and novel materials can simplify solution processing of OLEDs. In each of the chapters of this thesis, an approach to increasing the performance of OLEDs was examined. Thin silver layers were produced from a particle-free silver ink using inkjet. Their optical and electrical properties were characterized. The printed electrodes show a high flexural strength while retaining good electrical properties. The efficacy of the light-emitting diodes produced in this way exceeds that of reference diodes. To be able to further increase the efficiency of organic light-emitting diodes, intermediate layers made of new material combinations were subsequently investigated. The efficiency of inverted light-emitting diodes could be significantly increased by means of a blend intermediate layer made of zinc oxide and a polymer. Furthermore, two newly synthesized molecules were used to improve the wetting of perovskites on electrodes and thus enable their manufacturability using inkjet printing. Finally, crosslinking of polymers to fabricate multilayer devices was investigated. Here, the solubility of a polymer is reduced by various approaches. This principle was demonstrated using the light-emitting polymer Super Yellow. The resistance of a layer of Super Yellow against toluene was successfully reduced significantly. Thus, subsequent processing of an additional layer from the same solvent was made possible.