This dissertation presents a detailed account of the study undertaken on the subject of heat and mass transfer phenomena in porous media. The current work specifically targets the general reaction-diffusion systems arising in separation processes using porous sorbent particles. These particles are comprised of pore channels spanning length scales over almost three orders of magnitude while involving a variety of physical processes such as mass diffusion, heat transfer and surface adsorption-desorption. A novel methodology is proposed in this work that combines models that account for the multi-scale and multi-physics phenomena involved. Pore-resolving DNS calculations using an immersed boundary method (IBM) framework are used to simulate the macro-scale physics while the phenomena at smaller scales are modeled using a sub-pore modeling technique. The IBM scheme developed as part of this work is applicable to complex geometries on curvilinear grids, while also being very efficient, consuming less than 1% of the total simulation time per time-step. A new method of implementing the conjugate heat transfer (CHT) boundary condition is proposed which is a direct extension of the method used for other boundary conditions and does not involve any complex interpolations like previous CHT implementations using IBM. Detailed code verification and validation studies are carried out to demonstrate the accuracy of the developed method. The developed IBM scheme is used in conjunction with a stochastic reconstruction procedure based on simulated annealing. The developed framework is tested in a two-dimensional channel with two types of porous sections - one created using a random assembly of square blocks and another using the stochastic reconstruction procedure. Numerous simulations are performed to demonstrate the capability of the developed framework. The computed pressure drops across the porous section are compared with predictions from the Darcy-Forchheimer equation for media composed of different structure sizes. The developed methodology is also applied to CO2 diffusion studies in porous spherical particles of varying porosities. For the pore channels that are unresolved by the IBM framework, a sub-pore modeling methodology developed as part of this work which solves a one-dimensional unsteady diffusion equation in a hierarchy of scales represented by a fractal-type geometry. The model includes surface adsorption-desorption, and heat generation and absorption. It is established that the current framework is useful and necessary for reaction-diffusion problems in which the adsorption time scales are very small (diffusion-limited) or comparable to the diffusion time scales. Lastly, parametric studies are conducted for a set of diffusion-limited problems to showcase the powerful capability of the developed methodology. / Ph. D.

O escoamento em torno de corpos tem sido objeto de estudo de muitos pesquisadores e é muito explorado experimental e computacionalmente, devido a sua grande aplicabilidade na engenharia. No entanto, simular computacionalmente este tipo de escoamento requer uma atenção especial ao escolher o tipo malha a ser utilizado. Em muitos casos faz-se necessário o uso de uma malha que se adapte ao contorno do obstáculo, o que pode ocasionar um aumento no esforço computacional. Um maneira de contornar este problema é a utilização do Método das Fronteiras Imersas, que possibilita o uso de malha cartesiana na simulação computacional do escoamento em torno de obstáculos. Isso é possível através da adição de um termo forçante nas equações que modelam o escoamento, e assim as forças que agem sobre o contorno do corpo são transferidas diretamente para a malha. O objetivo deste trabalho de mestrado foi implementar o método das Fronteiras Imersas e simular o escoamento em torno de um cilindro circular em repouso, movimentando-se na mesma direção do escoamento, na direção perpendicular ao escoamento, ou rotacionando em torno do próprio eixo. As simulações computacionais possibilitaram a captura do fenômeno de Atrelagem Síncrona, caracterizado pela sincronia entre a frequência de desprendimento natural de vórtices e a frequência de oscilação do mesmo. O Método das Fronteiras Imersas mostrou um ótimo desempenho quando comparado a resultados experimentais e numéricos encontrados na literatura / The flow around bodies have been studied by many researchers. Both experimental and computational approaches have been extensively explored in researches on flow around bodies and have been applied in many engeneering problems. However, to choose an appropriate type of mesh to perform computational simulations of this type of problem requires special attention. In many cases, it is necessary to use a mesh that is able to conform to the boundary if a given obstacle. The need to perform this adaptation may increase the computational effort. The Immersed Boundary Method enables the use of cartesian meshes to perform computational simulations of flows around obstacles. The idea of this method is to add a forcing term in the equations that model the flow. Thus, the forces applied on the body boundaries are directly transfered to the mesh. The aim of this work was to perform a computational implementation of the Immersed Boundary Method to simulate the flow over a oscilating circular cylinder. This oscilation may be inline with the flow, cross-flow, or rotating. The computational simulations enabled the capture of the lock-in phenomena, which consists of the syncronization between the vortex shedding frequency and the cylinder oscilation frequency. The results obtained from the computational simulations using the Immersed Boundary Method were in good agreement with the numerical and experimental results found in the literature

No description available.

Single ventricle heart defects, where systemic and pulmonary venous returns mix in the single functional ventricle, represent the most complex form of congenital heart defect, affecting 2 babies per 1000 live births. Surgical repairs, termed "Fontan Repairs," reroute the systemic venous return directly to the pulmonary arteries, thus preventing venous return mixing and restoring normal oxygenation saturation levels. Unfortunately, these repairs are only palliative and Fontan patients are subjected to a multitude of chronic complications. It has long been suspected that hemodynamics play a role in determining patient outcome. However, the number of anatomical and functional variables that come into play and the inability to conduct large scale clinical evaluations, due to too small a patient population, has hindered decisive progress and there is still not a good understanding of the optimal care strategies on a patient-by-patient basis. Over the past decades, image-guided computational fluid dynamics (CFD) has arisen as an attractive option to accurately model such complex biomedical phenomena, providing a high degree of freedom regarding the geometry and flow conditions to be simulated, and carrying the potential to be automated for large sample size studies. Despite these theoretical advantages, few CFD studies have been able to account for the complexity of patient-specific anatomies and in vivo pulsatile flows. In this thesis, we develop an unstructured Cartesian immersed-boundary flow solver allowing for high resolution, time-accurate simulations in arbitrarily complex geometries, at low computational costs. Combining the proposed and validated CFD solver with an interactive virtual-surgery environment, we present an image-based surgical planning framework that: a) allows for in depth analysis of the pre-operative in vivo hemodynamics; b) enables surgeons to determine the optimum surgical scenario prior to the operation. This framework is first applied to retrospectively investigate the in vivo pulsatile hemodynamics of different Fontan repair techniques, and quantitatively compare their efficiency. We then report the prospective surgical planning investigations conducted for six failing Fontan patients with an interrupted inferior vena cava and azygous continuation. In addition to a direct benefit to the patients under consideration, the knowledge derived from these surgical planning studies will also have a larger impact for the clinical management of Fontan patients as they shed light onto the impact of caval offset, vessel flaring and other design parameters upon the Fontan hemodynamics depending on the underlying patient anatomy. These results provide useful surgical guidelines for each anatomical template, which could benefit the global surgical community, including centers that do not have access to patient-specific surgical planning interfaces.

Fluid-structure interaction (FSI), occurrent in many areas of engineering and in the natural world, has been the subject of much research using a wide range of modelling strategies. However, problems with high levels of structural deformation are difficult to resolve and this is particularly the case for biomedical flows. A Lagrangian flow model coupled with a robust model for nonlinear structural mechanics seems a natural candidate since large distortion of the computational geometry is expected. Smoothed particle Hydrodynamics (SPH) has been widely applied for nonlinear interface modelling and this approach is investigated here. Biomedical applications often involve thin flexible structures and a consistent approach for modelling the interaction of fluids with such structures is also required. The Lagrangian weakly compressible SPH method is investigated in its recent delta-SPH form utilising inter-particle density fluxes to improve stability. Particle shifting is also used to maintain particle distributions sufficiently close to uniform to enable stable computation. The use of artificial viscosity is avoided since it introduces unphysical dissipation. First, solid boundary conditions are studied using a channel flow test. Results show that when the particle distribution is allowed to evolve naturally instabilities are observed and deviations are noted from the expected order of accuracy. A parallel development in the SPH group at Manchester has considered SPH in Eulerian form (for different applications). The Eulerian form is applied to the channel flow test resulting in improved accuracy and stability due to the maintenance of a uniform particle distribution. A higher-order accurate boundary model is developed and applied for the Eulerian SPH tests and third-order convergence is achieved. The well documented case of flow past a thin plate is then considered. The immersed boundary method (IBM) is now a natural candidate for the solid boundary. Again, it quickly becomes apparent that the Lagrangian SPH form has limitations in terms of numerical noise arising from anisotropic particle distributions. This corrupts the predicted flow structures for moderate Reynolds numbers (O(102)). Eulerian weakly compressible SPH is applied to the problem with the IBM and is found to give accurate and convergent results without any numerical stability problems (given the time step limitation defined by the Courant condition). Modelling highly flexible structures using the discrete element model is investigated where granular structures are represented as bonded particles. A novel vector-based form (the V-Model) is identified as an attractive approach and developed further for application to solid structures. This is shown to give accurate results for quasi-static and dynamic structural deformation tests. The V-model is applied to the decay of structural vibration in a still fluid modelled using Eulerian SPH with no artificial stabilising techniques. Again, results are in good agreement with predictions of other numerical models. A more demanding case representative of pulsatile flow through a deep leg vein valve is also modelled using the same form of Eulerian SPH. The results are free of numerical noise and complex FSI features are captured such as vortex shedding and non-linear structural deflection. Reasonable agreement is achieved with direct in-vivo observations despite the simplified two-dimensional numerical geometry. A robust, accurate and convergent method has thus been developed, at present for laminar two-dimensional low Reynolds number flows but this may be generalised. In summary a novel robust and convergent FSI model has been established based on Eulerian SPH coupled to the V-Model for large structural deformation. While these developments are in two dimensions the method is readily extendible to three-dimensional, laminar and turbulent flows for a wide range of applications in engineering and the natural world.

L'objectif de cette thèse est d'améliorer la compréhension des phénomènes jouant un rôle dans la mesure effectuée dans un analyseur sanguin, en particulier le comptage et la mesure de volumétrie d'une population de globules rouges reposant sur l'effet Coulter. Des simulations numériques sont effectuées dans le but de prédire la dynamique des globules rouges dans les zones de mesure et pour reproduire la mesure électrique associée, servant au comptage et à la volumétrie des cellules. Ces simulations sont effectuées à l'intérieur de configurations industrielles d'analyseur sanguin, en utilisant un outil numérique développé à l'IMAG, le solveur YALES2BIO. En utilisant la méthode des frontières immergées avec suivi de front, un modèle de particule déformable est introduit, celui-ci prend en compte le contraste de viscosité ainsi que les effets mécaniques de la courbure et de l'élasticité sur la membrane. Le solveur est validé grâce à de nombreux cas tests parcourant différents régimes et effets physiques. L'écoulement fluide dans cette géométrie d'analyseur sanguin est caractérisée par un fort gradient de vitesse axial dans la direction de l'écoulement, impliquant la présence d'un écoulement extensionnel au niveau du micro-orifice, là où a lieu la mesure. La dynamique des globules rouges est étudiée par des simulations numériques pour différentes conditions initiales, telles que sa position ou son orientation. Il est observé que les globules rouges vont se réorienter selon l'axe principal de l'analyseur sanguin dans tous les cas. Pour comprendre le phénomène, des modèles analytiques sont adaptés au cas des écoulements extensionnels et reproduisent correctement les tendances de réorientation.Cette thèse présente également la reproduction de la mesure électrique utilisée pour le comptage et la mesure de la distribution des volumes de globules rouges. De nombreuses simulations de la dynamique des globules rouges sont effectuées et utilisées pour générer l'impulsion électrique correspondant au passage du globule rouge dans le micro-orifice. Les amplitudes d'impulsions électriques résultantes permettent la caractérisation de la réponse électrique en fonction des paramètres initiaux de la simulation par une approche statistique. Un algorithme de Monte-Carlo est utilisé pour la quantification des erreurs de mesure liées à l'orientation et la position des globules rouges dans le micro-orifice. Ceci permet la génération d'une distribution de volume mesurée pour une population de globules rouges bien définie et la caractérisation des erreurs de mesure associées. / The aim of this thesis is to improve the understanding of the phenomena involved in the measurement performed in a blood analyzer, namely the counting and sizing of red blood cells based on the Coulter effect. Numerical simulations are performed to predict the dynamics of red blood cells in the measurement regions, and to reproduce the associated electrical measurement used to count and size the cells. These numerical simulations are performed in industrial configurations using a numerical tool developed at IMAG, the YALES2BIO solver. Using the Front-Tracking Immersed Boundary Method, a deformable particle model for the red blood cell is introduced which takes the viscosity contrast as well as the mechanical effects of the curvature and elasticity on the membrane into account. The solver is validated against several test cases spreading over a large range of regimes and physical effects.The velocity field in the blood analyzer geometry is found to consist of an intense axial velocity gradient in the direction of the flow, resulting in a extensional flow at the micro-orifice, where the measurement is performed. The dynamics of the red blood cells is studied with numerical simulations with different initial conditions, such as its position or orientation. They are found to reorient along the main axis of the blood analyzer in all cases. In order to understand the phenomenon, analytical models are adapted to the case of extensional flows and are found to reproduce the observed trends.This thesis also presents the reproduction of the electrical measurement used to count red blood cells and measure their volume distribution. Numerous dynamics simulations are performed and used to generate the electrical pulse corresponding to the passage of a red blood cell inside the micro-orifice. The resulting electrical pulse amplitudes are used to characterize the electrical response depending on the initial parameters of the simulation by means of a statistical approach. A Monte-Carlo algorithm helps quantifying the errors on the measurement of cell depending on its orientation and position inside the micro-orifice. This allows the generation of a measured volume distribution of a well defined red blood cell population and the characterization of the associated measurement errors.

Cette thèse traite plusieurs aspects scientifiques inhérents à la simulation numérique de problèmes d'interaction fluide-structure impliquant de fines membranes déformables. Deux cas spécifiques relatifs à la biomécanique cardiovasculaire sont considérés : l'interaction de l'écoulement sanguin avec la valve aortique (qui se produit à l'échelle macroscopique), et l'interaction de la membrane des globules rouges avec ses fluides interne et externe (qui se produit à l'échelle microscopique). Dans les deux cas, le couplage fluide-structure est géré par l'intermédiaire d'un formalisme de frontières immergées, en représentant la membrane par un maillage Lagrangien se mouvant au travers d'un maillage fluide Eulérien. Lorsque l'on traite la dynamique des globules rouges, la membrane est considérée comme étant une structure sans masse et infiniment fine. La première question à laquelle on s'intéresse dans cette thèse est la manière de modéliser la microstructure complexe de la membrane des globules rouges. Un moyen possible pour caractériser un modèle de membrane adapté est de simuler l'expérience des pinces optiques, qui consiste en une configuration expérimentale bien contrôlée qui permet d'étudier la mécanique individuelle d'un globule rouge isolé dans une large gamme de déformations. Plusieurs modèles pertinents sont identifiés, mais les caractéristiques de déformation mesurées durant l'expérience des pinces optiques se révèlent n'être pas assez sélectives pour être utilisées dans un contexte de validation. Des mesures de déformation additionnelles sont proposées, qui pourraient permettre une meilleure caractérisation de la mécanique de la membrane des globules rouges. En ce qui concerne les configurations macroscopiques, une méthode numérique innovante est proposée afin de gérer des simulations numériques de membranes 3D continues, en conservant le formalisme de frontières immergées. Dans cette méthode, appelée méthode des frontières immergées épaisses, la membrane a une épaisseur finie. La précision et la robustesse de la méthode sont démontrées par l'intermédiaire d'une variété de cas tests bien choisis. La méthode proposée est ensuite appliquée à un problème d'interaction fluide-structure réaliste, à savoir l'interaction d'un écoulement (sanguin) pulsé avec une valve aortique biomimétique. Une étude combinée expérimentale et numérique est menée, montrant que la méthode est capable de capturer la dynamique globale de la valve, ainsi que les principales caractéristiques de l'écoulement en aval de la valve. Tous les développements ont été effectués dans le solveur YALES2BIO (http://www.math.univ-montp2.fr/~yales2bio/) développé à l'IMAG, qui est donc disponible pour toutes autres améliorations, validations et études applicatives. / This thesis deals with several scientific aspects inherent to the numerical simulation of fluid-structure interaction problems involving thin deformable membranes. Two specific cases relevant to cardiovascular biomechanics are considered: the interaction of the blood flow with the aortic valve (which occurs at the macroscopic scale), and the interaction of the red blood cells membrane with its inner and outer fluids (which occurs at the microscopic scale). In both cases, the fluid-structure interaction coupling is handled using an immersed boundary formalism, representing the membrane by a Lagrangian mesh moving through an Eulerian fluid mesh.When dealing with red blood cells dynamics, the membrane is considered to be an infinitely thin and massless structure. The first question which is addressed in the present thesis work is how to model the complex microstructure of the red blood cells membrane. A possible way to characterize a suitable membrane model is to simulate the optical tweezers experiment, which is a well-controlled experimental configuration enabling to study the individual mechanics of an isolated red blood cell in a large range of deformation. Some relevant membrane models are identified, but the deformation characteristics measured during the optical tweezers experiment reveal to be not selective enough to be used in a validation context. Additional deformation measurements are proposed, which could allow a better characterization of the red blood cell membrane mechanics.Regarding the macroscopic configurations, an innovative numerical method is proposed to handle numerical simulations of 3D continuum membranes, still within the immersed boundary formalism. In this method, called immersed thick boundary method, the membrane has a finite thickness. The accuracy and robustness of the method are demonstrated through a variety of well-chosen test cases. Then, the proposed method is applied to a realistic fluid-structure interaction problem, namely the interaction of a pulsatile (blood) flow with a biomimetic aortic valve. A combined experimental and numerical study is led, showing that the method is able to capture the global dynamics of the valve, as well as the main features of the flow downstream of the valve.All the developments were performed within the YALES2BIO solver (http://www.math.univ-montp2.fr/~yales2bio/) developed at IMAG, which is thus available for further improvements, validations and applicative studies.

L’objectif de cette thèse est de répondre au besoin d’accélérer la restitution des résultats de calcul d’un code CFD pour la simulation d’écoulements hydrodynamiques quasi-incompressibles. Ce code présente l’originalité de résoudre explicitement les équations de Navier-Stokes sous l’hypothèse de faible compressibilité avec des schémas numériques d’ordre élevé. Les développements effectués visent à réduire les temps de calcul à précision équivalente.Une première partie est consacrée à l’implémentation d’une formulation purement incompressible avec une résolution implicite de la pression par un schéma de projection. La formulation incompressible autorise des pas de temps plus grand en s’affranchissant de la vitesse du son, mais au prix d’une algorithmique plus complexe et de la nécessité de résoudre un système linéaire. La comparaison des deux formulations,faiblement-compressible et incompressible, tend à montrer la pertinence du schéma de projection pour les écoulements laminaires instationnaires.Un deuxième axe de développement a consisté en la proposition d’une amélioration de la méthode de frontière immergée initialement présente dans le code.Si les résultats obtenus ne sont pas encore pleinement satisfaisants, ils montrent que la montée en ordre d’une méthode de frontière immergée peut être moins contraignante en formulation incompressible.Enfin la dernière partie traite de l’immersion rapide et robuste de géométries complexes telles qu’elles peuvent être rencontrées dans l’industrie. La localisation géométrique par arbre octal permet d’évaluer rapidement une fonction de distance signée indispensable pour la méthode de frontière immergée. / An original strategy to address hydrodynamic flow was recently proposed through a high-order weakly-compressible Cartesian grid approach. The method is based on a fully-explicit temporal scheme for solving the Navier-Stokes equations. The present thesis aims to reduce the computational time required to obtain the results without deteriorating the accuracy.A first part is dedicated to the implementation of a truly incompressible formulation with an implicit solution for the pressure field through a projection scheme. The incompressible solver allows larger time step size for time integration since the speed of sound tends to infinity. In return the algorithms are no longer straight forward and a linear system has to be solved through the Pressure Poisson Equation. Comparisons carried out between both formulations show that the projection scheme can be better adapted to efficiently simulate unsteady viscous flows. Then an improvement of the immersed boundary method has been proposed. Results are not fully satisfactory for now. However, it seems easier to develop a numerical scheme for the incompressible approach rather than the weakly-compressible one.Finally, the last part addresses the setup up of complex triangulations in immersed boundary simulations. A fast and robust procedure is developed for distance computation with an octree data structure.

Cette thèse s’inscrit dans le contexte de la simulation et du contrôle des vibrations de structures montées sur ressort qui peuvent apparaître sous l’effet de l’interaction avec l’écoulement de sillage instationnaire. Le contrôle de ce phénomène, appelé vibrations induites par vortex (VIV), est un enjeu critique dans l’optimisation de nombreux systèmes. Une méthode de frontières immergées (IBM) a été intégrée dans l’algorithme PISO du code OpenFOAM, dédié à la simulation d’écoulements fluides incompressibles. La méthode IBM permet une représentation précise de corps fixes ou en mouvement, tout en conservant des maillages structurés conduisant à des algorithmes plus précis et efficaces en termes de performances numériques. Pour calculer la divergence de l’équation de quantité de mouvement dans une boucle PISO et l’interpolation des flux, un calcul hybride orignal a été proposé avec une résolution analytique utilisant l’équation de la fonction noyau des quantités impliquant le terme force de l’IBM (quantités singulières). La méthode a été étendu au formalisme d’écoulements en régimes turbulents. Une loi de paroi a été intégrée permettant de modéliser la couche limite à grand nombre de Reynolds. Le travail de validation a été réalisé au regard des données expérimentales et numériques disponibles dans la littérature pour l’étude d’écoulements autour de cylindres et de sphères, sur une large gamme de nombres de Reynolds. Avec l’objectif de développer des lois de contrôle optimal pour le VIV, basées sur les mécanismes d’instabilité linéaire du système couplé dans le cadre de la théorie du contrôle, un solveur adjoint a été développé et validé. / This thesis is related to the simulation and the control of the vortex induced vibrations phenomenon (VIV), which can result from the fluid structure interactions between an unsteady wake and the body, when the shedding frequency in the wake is close to the natural frequency of the body. The control of VIV is a critical issue when optimizing many systems. An Immersed Boundaries Method (IBM) was implemented into the PISO algorithm as a new library of OpenFOAM, in order to perform reliable simulations of incompressible flows around bluff bodies.To compute the divergence of the momentum equation and the interpolation of the fluxes, an hybrid calculation with an analytical resolution of the quantities involving the force term (singular quantities) has been proposed. The mesh convergence of several errors was shown by means of a manufactured solution, allowing to analyze both the errors irelated to the discretization and to the IBM. The new algorithm was subsequently extended to the RANS and DDES formalism proposed in OpenFOAM for the simulation of turbulent flows. A wall law was integrated into theIBM method to model the boundary layers that develop around the bodies at large Reynolds numbers. Various 2D and 3D well-documented test cases of academic flows around fixed or moving solid bodies (cylinderand sphere) have been simulated and carefully validated against existing data from the literature in a large range of Reynolds numbers. With the objective of developing optimal control laws for VIV, based on the linear instability mechanisms of the coupled system within the framework of the control theory, a new adjoint solver was also developed and validated in OpenFOAM.

We study the turbulent flow of a fluid over a canopy, that we model as a deformable porous medium. This porous medium is more precisely a carpet of fibres that bend under the hydrodynamic load, hence initiating a fluid-structure coupling at the scale of a fibre's height (honami). The objective of the thesis is to develop a macroscopic model of this fluid-structure interaction in order to perform numerical simulations of this process. The volume averaging method is implemented to describe the large scales of the flow and their interaction with the deformable porous medium. An hybrid approach is followed due to the non-local nature of the solid phase; While the large scales of the flow are described within an Eulerian frame by applying the method of volume averaging, a Lagrangian approach is proposed to describe the ensemble of fibres. The interface between the free-flow and the porous medium is handle with a One-Domain- Approach, which we justify with the theoretical development of a mass- and momentum- balance at the fluid/porous interface. This hybrid model is then implemented in a parallel code written in C$++$, based on a fluid- solver available from the \openfoam CFD toolbox. Some preliminary results show the ability of this approach to simulate a honami within a reasonable computational cost. Prior to implementing a macroscopic model, insight into the small-scale is required. Two specific aspects of the small-scale are therefore studied in details; The first development deals with the inertial deviation from Darcy's law. A geometrical parameter is proposed to describe the effect of inertia on Darcy's law, depending on the shape of the microstructure of the porous medium. This topological parameter is shown to efficiently characterize inertia effects on a diversity of tested microstructures. An asymptotic filtration law is then derived from the closure problem arising from the volume averaging method, proposing a new framework to understand the relationship between the effect of inertia on the macroscopic fluid-solid force and the topology of the microstructure of the porous medium. A second research axis is then investigated. As we deal with a deformable porous medium, we study the effect of the pore-scale fluid-structure interaction on the filtration law as the flow within the pores is unsteady, inducing time-dependent fluidstresses on the solid- phase. For that purpose, we implement pore-scale numerical simulations of unsteady flows within deformable pores, focusing for this preliminary study on a model porous medium. Owing to the large displacements of the solid phase, an immersed boundary approach is implemented. Two different numerical methods are compared to apply the no-slip condition at the fluid-solid interface: a diffuse interface approach and a sharp interface approach. The objective is to find the proper method to afford acceptable computational time and a good reliability of the results. The comparison allows a cross-validation of the numerical results, as the two methods compare well for our cases. This numerical campaign shows that the pore-scale deformation has a significant impact on the pressure drop at the macroscopic scale. Some fundamental issues are then discussed, such as the size of a representative computational domain or the form of macroscopic equations to describe the momentum transport within a soft deformable porous medium.