Global ETD Search

21	Investigation of Indoor Propagation Algorithms for Localization Purposes: Simulation and Measurements of Indoor Propagation Algorithms for Localization Applications using Wall Correction Factors, Local Mean Power Estimation and Ray Tracing Validations Obeidat, Huthaifa A.N. January 2018 (has links) The objective of this work is to enhance the awareness of the indoor propagation behaviour, by a set of investigations including simulations and measurements. These investigations include indoor propagation behaviour, local mean power estimation, proposing new indoor path loss model and introducing a case study on 60 GHz propagation in indoor environments using ray tracing and measurements. A summary of propagation mechanisms and manifestations in the indoor environment is presented. This comprises the indoor localization techniques using channel parameters in terms of angle of arrival (AOA), time of arrival (TOA) and received signal strength (RSS). Different models of path loss, shadowing and fast fading mechanisms are explored. The concept of MIMO channels is studied using many types of deterministic channel modelling such as Finite Difference Time Domain, Ray tracing and Dominant path model. A comprehensive study on estimating local average of the received signal strength (RSS) for indoor multipath propagation is conducted. The effect of the required number of the RSS data and their Euclidian distances between the neighbours samples are investigated over 1D, 2D and 3D configurations. It was found that the effect of fast fading was reduced sufficiently using 2D horizontal’s arrangement with larger spacing configuration. A modified indoor path loss prediction model is presented namely effective wall loss model (EWLM). The modified model with wall correction factors is compared to other indoor path loss prediction models using simulation data (for 2.4, 5, 28, 60 and 73.5 GHz) and real-time measurements (for 2.4 and 5 GHz). Different operating frequencies and antenna polarizations are considered to verify the observations. In the simulation part, EWLM shows the best performance among other models. Similar observations were recorded from the experimental results. Finally, a detailed study on indoor propagation environment at 60 GHz is conducted. The study is supported by Line of Sight (LoS) and Non-LoS measurements data. The results were compared to the simulated ones using Wireless-InSite ray tracing software. Several experiments have confirmed the reliability of the modelling process based on adjusted material properties values from measurements. Indoor path loss model Indoor propagation Received signal strength RSS Ray tracing Local mean power Millimetre wave Wireless Local Area Network WLAN Line of Sight LoS Time of Arrival ToA Angle of Arrival AoA
22	Towards an end-to-end multiband OFDM system analysis Saleem, Rashid January 2012 (has links) Ultra Wideband (UWB) communication has recently drawn considerable attention from academia and industry. This is mainly owing to the ultra high speeds and cognitive features it could offer. The employability of UWB in numerous areas including but not limited to Wireless Personal Area Networks, WPAN's, Body Area Networks, BAN's, radar and medical imaging etc. has opened several avenues of research and development. However, still there is a disagreement on the standardization of UWB. Two contesting radios for UWB are Multiband Orthogonal Frequency Division Multiplexing (MB-OFDM) and DS-UWB (Direct Sequence Ultra Wideband). As nearly all of the reported research on UWB hasbeen about a very narrow/specific area of the communication system, this thesis looks at the end-to-end performance of an MB-OFDM approach. The overall aim of this project has been to first focus on three different aspects i.e. interference, antenna and propagation aspects of an MB-OFDM system individually and then present a holistic or an end-to-end system analysis finally. In the first phase of the project the author investigated the performance of MB-OFDM system under the effect of his proposed generic or technology non-specific interference. Avoiding the conventional Gaussian approximation, the author has employed an advanced stochastic method. A total of two approaches have been presented in this phase of the project. The first approach is an indirect one which involves the Moment Generating Functions (MGF's) of the Signal-to-Interference-plus-Noise-Ratio (SINR) and the Probability Density Function (pdf) of the SINR to calculate the Average Probabilities of Error of an MB-OFDM system under the influence of proposed generic interference. This approach assumed a specific two-dimensional Poisson spatial/geometric placement of interferers around the victim MB-OFDM receiver. The second approach is a direct approach and extends the first approach by employing a wider class of generic interference. In the second phase of the work the author designed, simulated, prototyped and tested novel compact monopole planar antennas for UWB application. In this phase of the research, compact antennas for the UWB application are presented. These designs employ low-loss Rogers duroid substrates and are fed by Copla-nar Waveguides. The antennas have a proposed feed-line to the main radiating element transition region. This transition region is formed by a special step-generating function-set called the "Inverse Parabolic Step Sequence" or IPSS. These IPSS-based antennas are simulated, prototyped and then tested in the ane-choic chamber. An empirical approach, aimed to further miniaturize IPSS-based antennas, was also derived in this phase of the project. The empirical approach has been applied to derive the design of a further miniaturized antenna. More-over, an electrical miniaturization limit has been concluded for the IPSS-based antennas. The third phase of the project has investigated the effect of the indoor furnishing on the distribution of the elevation Angle-of-Arrival (AOA) of the rays at the receiver. Previously, constant distributions for the AOA of the rays in the elevation direction had been reported. This phase of the research has proposed that the AOA distribution is not fixed. It is established by the author that the indoor elevation AOA distributions depend on the discrete levels of furnishing. A joint time-angle-furnishing channel model is presented in this research phase. In addition, this phase of the thesis proposes two vectorial or any direction AOA distributions for the UWB indoor environments. Finally, the last phase of this thesis is presented. As stated earlier, the overall aim of the project has been to look at three individual aspects of an MB-OFDM system, initially, and then look at the holistic system, finally. Therefore, this final phase of the research presents an end-to-end MB-OFDM system analysis. The interference analysis of the first phase of the project is revisited to re-calculate the probability of bit error with realistic/measured path loss exponents which have been reported in the existing literature. In this method, Gaussian Quadrature Rule based approximations are computed for the average probability of bit error. Last but not the least, an end-to-end or comprehensive system equation/impulse response is presented. The proposed system equation covers more aspects of an indoor UWB system than reported in the existing literature.
23	Channel Probing for an Indoor Wireless Communications Channel Hunter, Brandon 13 March 2003 (has links) (PDF) The statistics of the amplitude, time and angle of arrival of multipaths in an indoor environment are all necessary components of multipath models used to simulate the performance of spatial diversity in receive antenna configurations. The model presented by Saleh and Valenzuela, was added to by Spencer et. al., and included all three of these parameters for a 7 GHz channel. A system was built to measure these multipath parameters at 2.4 GHz for multiple locations in an indoor environment. Another system was built to measure the angle of transmission for a 6 GHz channel. The addition of this parameter allows spatial diversity at the transmitter along with the receiver to be simulated. The process of going from raw measurement data to discrete arrivals and then to clustered arrivals is analyzed. Many possible errors associated with discrete arrival processing are discussed along with possible solutions. Four clustering methods are compared and their relative strengths and weaknesses are pointed out. The effects that errors in the clustering process have on parameter estimation and model performance are also simulated. multipath multipath propagation propagation environment indoor propagation indoor multipath indoor multipath propagation channel probing channel probing indoor wireless communications channel indoor wireless communications indoor wireless communications wireless communications wireless communications channel MIMO SISO multiple input multiple output single input single output antenna diversity antenna diversity antenna array channel modeling modeling model wireless propagation clustering methods clustering algorithms clustering parameter estimation parameter channel matrix h matrix ray tracing point spread function psf deconvolution clean algorithm clean algorithm antenna pattern network analyzer temporal pattern 2.4 ghz system 6 ghz system channel capacity capacity estimate channel capacity estimate propagation environment scattering transfer matrix matrix water filling solution water filling method water filling Saleh Valenzuela Saleh and Valenzuela Model arrival time of arrival angle of arrival direction of arrival arrival amplitude arrivals antenna positioner data simulations measurements angle of departure direction of departure correlation convolution errors error CFA CFAD constant false alarm constant false alarm detection signal signal dependent clutter clutter returns transmitter transmit receive receiver transmit antenna receive antenna spatial correlation system PSF system point spread function mapping fuzzy c-means clustering fuzzy clustering c-means clustering c-means fuzzy k-means euclidean distance time amplitude delay performance prediction performance prediction errors fuzzy weighted distance method rectangular method weighted rectangular method statistics statistical statistical model Electrical and Computer Engineering

Page generated in 0.076 seconds