The aim of the thesis is to present the process connected with the identification of industrial clusters and to point out possible methods and instruments that are useable by such identification. The target is not only focussed on description of these methods but also on consideration that the methods are likewise useful in regions of Czech Republic, especially taken into account the existing offer of regional data. The diplom thesis consists of three parts. The first part represents theoretical introduction to clusters' problem. The second part, also the theoretical one, deals widely with quantitative and qualitative methods and with procedures and clasification that belong to these methods. The third part applies the theoretical knowledge into practices. The comparison methods are used in the theoretical part and the methods of analysis, synthesis, comparison and induction are used in the practical part. The diplom thesis brings a quantitative extension of methods that have been used so far when identifying the industrial clusters in Czech Republic. Due to the present trend of prefering the qualitative methods, the extension of quantitative methods could be seen as a retrograde act. But the conditions of Czech Republic tourned out that, in fact, it is a suitable extension of statistical instruments.

Current human activity is degrading the environment and depleting biotic and abiotic resources at unheard-of rates, inducing global environmental change and jeopardising the development of humankind. The structure of human activity determines which resources are extracted, how they are transformed and where and how they are emitted back to the environment. Thus, the structure of human activity ultimately determines the human-Earth System interaction and human-induced environmental degradation. Several theories and empirical findings suggest that a cyclic structure would lower the resource requirements and emissions of the economic system, decoupling production and consumption from their environmental impacts. However, the cyclic structure has not been fully characterised nor related to the resource requirements or emission generation estimates of environmental impacts as calculated through models representing the physical structure of the economic system. This thesis is interested in developing tools to analyse the physical structure of the economic system and, ultimately, to develop a method to identify its cyclic structure and relate it to the environmental impact induced by economic activity. Using this new knowledge, it might be possible to reduce the environmental impact of the economy by altering its physical structure. In chapter 3, the different methods to calculate the emissions and resources associated to a given final demand of physical input-output tables are reviewed because they gather different results; it is argued that only two are valid. Surprisingly, these two methods reveal different physical structures; these are explored using a backward linkage analysis and their differences explained. It is found that only one method is appropriate to analyse the physical structure of the economic system and this method is in fact a new input-output model capable of tracing by-products as final outputs. Also, since traditional input-output structural analyses provide aggregate measures, a visual representation of input-output tables enabling researchers to perform disaggregated structural analyses and identify intersectoral patterns is developed. In chapter 4, a method to derive the full cyclic structure of the economic system is developed using network analysis within the Input-Output framework; it identifies the intersectoral cycles and the resources and emissions associated to cycling. It is shown that cyclic flows maximise the system throughput but lower the resource efficiency of the system vis-à-vis the system outputs. It is demonstrated that 1) the complete structure is composed of a cyclic-acyclic and a direct-indirect sub-structure, challenging the common understanding of the functioning of the structure, and 2) cycling is composed of pre-consumer cycling, post-consumer cycling, re-cycling and trans-cycling. In chapter 5, a set of indicators are developed to capture the weight and emissions associated to each sub-structure and the sub-structures are related to the economy's resource efficiency and emissions. In chapter 6, it is illustrated how to use the concepts, indicators and methods developed in previous chapters to identify strategies to improve the resource efficiency of the economy by altering its structure. Finally, in chapter 7, it is suggested to refine the definition of recycling to integrate the different systemic effects of pre-consumer and post-consumer cycling and it is argued that the ideal structure of a circular, close-loop economy should minimise its pre-consumer cycling in favour of more efficient acyclic flows while maximising its post-consumer cycling.

The aim of my thesis is the construction of estimates of interregional commodity flows for the regions of the Czech Republic, by using a gravity model. Gravity model is based on Newton's law of gravitation. Gravity models can be used in two different information contexts. The first is an information context, when the spatial interaction flows are known a priori, and the model is used to explain the trade flows' behaviour. And the second is an information context in which these interactions are totally unknown a priori and the flows must be estimated. This paper is focused on the second information context. When we estimating commodity flows we need to know the value of exports and imports for individual regions. Estimated interregional commodity flows are the results of this work. Estimated interregional flows are put into the regional input-output tables compiled by the Department of Economic Statistics. Regional input-output tables are arranged so as to reached the equality of resources and use. On the basis of the resulting tables for all regions, I conducted a input-output analysis. Input-output analysis examines the impact of model changes to investment on selected commodities, to estimated interregional flows and selected macroeconomic indicators.

This dissertation is concerned with tax rates for the use of commodities in general, and energy in particular. Computable General Equilibrium (CGE) models are used to analyze the normative question of whether the tax rate for intermediate use by firms should be the same as the tax rate for final consumption by households. To answer this question, a distinction needs to be made between fiscal taxes for the purpose of raising revenue for the government, and Pigovian taxes for the purpose of changing behaviour. Concerning fiscal taxes, firms should not pay taxes on their use of inputs if the tax rates in final consumption are at their optimal level. If the tax rate for households is above the optimal level, intermediate use in firms should be taxed in order to increase the price of other commodities and reduce the distortion of relative prices. Essay 1 ascertains what factors determine the optimal relation between the tax rate for final consumption by households and intermediate use by firms. Essay 2 analyses Swedish energy taxes from the perspective of reducing global emission of CO2. It is found that the welfare maximizing tax rates are equal for households and firms not participating in emission trading, while firms that participate in emission trading should have a zero tax rate. Essays 3 and 4 deal with methodological issues. Essay 3 derives a new method for estimation of symmetric input-output tables from supply and use tables. This method solves the problem of negative coefficients, makes it possible to use both the industry and commodity technology assumptions simultaneously and enables the commodity technology assumption to be used even when the number of commodities is larger than the number of industries. Essay 4 describes the model used in the first two essays. The price structure developed here makes it possible to take into account price differences between different purchasers other than differences in tax rates. This essay also makes a comparison between the Swedish implementation of this model and other Swedish CGE-models used to analyse climate policy and energy taxation.

Cette thèse a pour ambition de transposer l'analyse du commerce international au niveau sub-national en examinant la structure et les déterminants du commerce entre états brésiliens, et avec les marchés internationaux. Dans un chapitre introductif, on présente les faits stylisés sur la le commerce brésilien en se concentrant essentiellement sur les caractéristiques des états brésiliens. Dans le premier chapitre, notre modèle de gravité, estime séparément les capacités d'exportation des états vers les marchés domestique et international. Les résultats montrent que les états les mieux classés en termes de capacités d'exportation vers le marché international ne se confondent pas avec les plus orientés vers le marché domestique. Dans le second chapitre, on utilise un modèle de gravité pour mettre en évidence les effets de création et de détournement de commerce ainsi qu’un un effet d’ « érosion des préférences ». Nous montrons que le MERCOSUR a permis d’augmenter le commerce des états avec les pays membres, sans effets significatifs sur le commerce inter-états ou avec les pays tiers. Les organisations internationales, suggèrent que le commerce en valeur ajoutée est une meilleure mesure pour analyser l’impact des échanges internationaux sur l’économie quand le contenu en importations des exportations est important. Dans un dernier chapitre, on calcule ainsi les valeurs ajoutées exportées des états brésiliens à partir d’un tableau Input-Output inter-états (2008) pour analyser et mesurer les spécialisations verticales entre les états. On estime également un modèle de gravité de commerce en valeur ajoutée qu’on élargit à un cadre trilatéral: l’état d’origine, l’état ré-exportateur et le pays importateur. / With the ambition of transposing trade analysis to an intra-national level, we work on the determinants and the structure of trade among Brazilian states, as well as their trade with international markets. In an introductory chapter, we present the stylized facts concerning the Brazilian trade while focusing mainly on the states’ characteristics. In chapter 1, we estimate the states’ domestic and foreign market export capacities by a gravity model of trade. Results show that the states with better foreign export capacities are not necessarily the same as those more oriented to the domestic market. Then in the second chapter, we use a gravity model to shed light on MERCOSUR’s creation and diversion effects as well as its “preference erosion” effect on trade among Brazilian states. We show that MERCOSUR increased Brazilian states’ trade with member countries, but had no significant effect on either interstate trade or Brazilian states’ trade with third countries. International organizations suggest the trade in value-added would be a “better” measure to understand the impact of trade on economy when import content in exports is important. Hence in a last chapter, we calculate the value-added exported by Brazilian states from an inter-state Input-Output table (2008) that we use to analyze and measure the vertical specialization between states. We also estimate a gravity model of trade in exported value-added that we extend to a trilateral frame: origin state, re-exporter state and importer country.

The master thesis deals with national accounts, particularly with symmetric input-output tables and utilisation for research of investments change impact. The main aim is to show national accounts exploitation for economical modelling and a manual for modelling of concrete impact. This thesis concentrates on the topic of calculation of static model with application on real data of Czech Republic. The base of calculation is technical coefficients analyse.

This study seeks to analyse and quantify cross-border effects of discretionary fiscal policies from two major points of view. The aggregate approach rests on the use of the structural vector autoregression model (SVAR) and its extension, the global vector autoregression model (GVAR). The discretionary fiscal impulse itself is then defined as a change in cyclically adjusted balance of the government sector, calculated at quarterly frequencies. This section is then complemented by a case study of a single measure: the German car scrapping scheme during 2009 and its effects on the Czech economy. It was found that cross-border effects of discretionary fiscal policies may be indeed present, in case certain conditions are met. Importantly, a fiscal impulse has to originate from a sufficiently large economy and there needs to be a tight trade linkage between examined countries. In most cases, cross-border effects have also been found of lesser magnitude than direct impacts of fiscal policies on the domestic country. Finally, as demonstrated on the German-Czech case, even a single fiscal measure can trigger substantial cross-border spillovers. It was estimated that this measure positively contributed to real GDP growth in 2009 in the Czech Republic by 0.44 pp.

The aim of the dissertation thesis is to develop a methodology of the compilation of symmetric Time Input-Output tables under the conditions of the Czech Republic. The following aim is to create an input-output model which is based on the compiled symmetric Time Input-Output tables. For the practical applications of this model it is crucial to link the created Input-Output model with the Semi-Dynamic Input-Output model. Semi-Dynamic Input-Output model in the conception of the submitted dissertation thesis takes into account several multiplier effects and presents more comprehensive tool for the use of the Input-Output analyses in this way. The first chapter focuses on the development of the issues linked to the Input-Output tables and analyses on the territory of the Czech Republic and in the world as well. The second chapter which is also theoretical is focused on mapping of different kinds of Input-Output analyses which are done in the world using Physical, Time or Hybrid Input-Output tables. The third chapter is a purely methodological because here it is described the methodology of the compilation of symmetric Time Input-Output tables as well as methodological approach to the various sensitivity analyses. The fourth chapter focuses on the creation Semi-Dynamic Input-Output model and on the formal linking with the Input-Output model based on the Time Input-Output tables. The last fifth chapter is focused analytically. Methods described in the third chapter are applied on the official published data on the Czech economy. The analytical chapter is perceived in the submitted dissertation thesis as a tool for the sensitivity analysis in the sense of validation of the quality of the compiled Time Input-Output tables.