Thesis (Ph. D.)--Columbia University, 1933. / Vita. Bibliography: p. 26-27.

Techn. University, Diss., 2004--Dresden.

Current research efforts have focused on the synthesis of novel, segmented, cross-linked networks and thermoplastics for emerging technologies. Tailoring macromolecular structures for improved mechanical performance can be accomplished through a variety of synthetic strategies using step-growth polymerization. The synthesis and characterization of novel Michael addition networks, ionene families, and ion-containing polyurethanes are described, with the underlying theme of fundamentally investigating the structure-property relationships of novel, segmented macromolecular architectures. In addition, it was discovered that both covalent and electrostatic crosslinking play an important role in the mechanical properties of all types of polymers described herein. Novel cross-linked networks were synthesized using quantitative base-catalyzed Michael chemistry with acetoacetate and acrylate functionalities. These novel synthetic strategies offer unique thermo-mechanical performance due to the formation of a multiphase morphology. In order to fundamentally elucidate the factors that influence the kinetics of the Michael addition reaction a detailed analyses of model compounds were conducted in the presence of an in-situ IR spectrometer to optimize reaction conditions using statistical design of experiments. Networks were then prepared based on these optimized conditions. The mechanical performance was evaluated as a function of molecular weight between crosslink points. Furthermore, the incorporation of hydrogen bonding within the monomer structure enhanced mechanical performance. The changes in morphological, thermal, and mechanical properties evaluated using dynamic mechanical analysis (DMA) and tensile behavior are described. In addition, the use of preformed urethane segments provides a safer method for incorporating hydrogen bonding functional groups into macromolecules. In order to compare the thermomechanical and morphological properties of ion-containing polyurethanes to non-charged polyurethanes, poly(tetramethylene oxide)-based polyurethanes containing either a novel phosphonium diol or 1,4-butanediol chain extenders were prepared using a prepolymer method. The novel phosphonium polyurethane was more crystalline, and it was presumed that hydrogen bonding in the non-charged polyurethane restricted polymer mobility, and reduced PTMO crystallinity, and hydrogen bonding interactions were significantly reduced due to the presence of phosphonium cations. These results correlated well with mechanical property analysis. The phase separation and ionic aggregation were demonstrated via wide-angle X-ray scattering, small-angle X-ray scattering, scanning transmission electron microscopy, and energy-dispersive X-ray spectroscopy during STEM imaging, as described herein. In addition, a novel polyurethane containing imidazolium cations in the hard segment was synthesized and behaved very similarly to the phosphonium cation-containing polyurethane. Ammonium ionenes, which contain quaternary nitrogen in the macromolecular repeating unit, have many potential uses in biomedical applications. They offer interesting coulombic properties, and the charge density is easily controlled through synthetic design. This property makes ionenes ideal polyelectrolyte models to investigate the influence of ionic aggregation on many physical properties. Ammonium ionenes were prepared via the Menshutkin reaction from 1,12-dibromododecane and 1,12-bis(N,N-dimethylamino)dodecane. The absolute molecular weights were determined for the first time using an on-line multi-angle laser light scattering (MALLS) in aqueous size exclusion chromatography (SEC). Tensile testing and DMA were used to establish structure-property relationships between molecular weight and mechanical properties for a series of 12,12-ammonium ionenes. Furthermore, degradation studies in the presence of base support the possibility for water-soluble coatings with excellent mechanical durability that are amenable to triggered depolymerization. A novel synthetic strategy was utilized to prepare chain extended 12,12-ammonium ionenes containing cinnamate functional groups. In the presence of UV light, the polymers chain extended, and the resulting ionenes possessed enhanced thermomechanical properties and increased molecular weight. In addition, the novel synthesis of imidazolium ionenes was demonstrated, and the charge density was tuned for appropriate applications using either low molecular weight segments or oligomeric precursors. The change in charge density had a profound role in imidazolium ionene thermal and mechanical behavior. / Ph. D.

Ammonium ionenes are macromolecules with quaternized nitrogen groups in the main chain. Ionenes are commonly referred to as x,y-ionene, where x and y represent the number of methylene groups between quaternized nitrogens. Synthesis of aliphatic ammonium ionenes has been studied since the early twentieth century; however, absolute molecular weight characterization has only been performed using extensive light scattering and viscosity experiments. Performing aqueous size exclusion chromatography (SEC) on ammonium ionenes provides absolute molecular weight determinations while eliminating the need for separate viscosity and light scattering experiments. We developed a mobile phase composition that provides reliable separation of aliphatic ammonium ionenes using aqueous SEC. For the first time, we report absolute molecular weights of aliphatic ammonium ionenes using this technique. We investigated the influence of charge density and structural symmetry on thermal and mechanical properties of ammonium 6,6-, 12,6- and 12,12-ionenes. Thermal properties were measured using differential scanning calorimetry (DSC) and thermal gravimetric analysis (TGA), and mechanical properties were measured using dynamic mechanical analysis (DMA) and an Instron. Incorporating low molecular weight polymer segments into the main chain of the ionene allows tailoring of polymer characteristics. Poly (tetramethylene oxide) segments decrease hydrophilicity and increase elastomeric character. Linear PTMO based ionenes have been synthesized previously, and we were interested in how branching affected thermal and mechanical properties. We synthesized bis(dimethylamino) poly(tetramethylene oxide) segments, and subsequently, synthesized linear and branched ionenes to study the effects of topology on thermal and mechanical properties. Polymers were analyzed using DMA, DSC, TGA, SAXS, and an Instron. / Master of Science

Verändern Photoreaktionen eingelagerter Substanzen die Klärtemperatur flüssigkristalliner Polyelektrolyt-Tensid-Komplexe? Komplexe (Salze) aus Polyaminen und Alkylsulfonsäuren bilden mit Wasser einen hexagonalen Flüssigkristall, der sich beim Erwärmen in eine optisch isotrope Phase umwandelt. In diese Demethylionenalkylsulfonate genannten Komplexe werden Bisthienylcyclopentene mit Alkylsulfonatseitenketten zwar ortsfest eingelagert, deren Photozyklisierung verschiebt das Gleichgewicht jedoch nur wenig von der hexagonalen zur isotropen Phase. Hingegen verläuft die Photozyklisierung der Bisthienylcyclopentene im festen Komplex teilweise deutlich langsamer als in Lösungen. / Can photoreactions of embedded substances change phase transition temperatures of polyelectrolyte surfactant complexes? Complexes made from polyamines and alkyl sulfonates form an hexagonal liquid crystal in presence of water, which is converted to optical isotropic phase by heating. These complexes resembling those of ionenes are called demethyl-ionene alkyl sulfonates. Bisthienylcyclopentenes bearing alkyl sulfonate side chains are incorporated into these complexes and keep their locations over prolonged periods of time, but the photocyclization of the chromophore only slightly shifts the equilibrium from hexagonal liquid crystal towards the optical isotropic phase. Conversely, the photocyclization of bisthienylcyclopentenes partially proceeds appreciably slower within the solid complex than in solution.

Acceptor copolymers with low lowest unoccupied molecular orbital (LUMO) energy levels are key materials for organic electronics. In the present work, quaternization of pyridine-flanked diketopyrrolopyrrole (PyDPPPy) is used to lower the LUMO energy level of the resulting monomer (MePyDPPPy) by as much as 0.7 eV. The drastically changed electronic properties of MePyDPPPy hinder a second methylation step even in an excess of trimethyloxonium tetrafluoroborate and thereby give access to the asymmetric functionalization of N-heterocycle-flanked DPP building blocks. The corresponding n-type polymeric ionene PMePyDPPPyT2 with bithiophene as comonomer forms thixotropic organogels with the p-type polythiophene P(g42T-TT), indicative of specific cross-interactions between this couple of copolymers. Gelation of polymer blend solutions, which is absent for other couples of p-type/ n-type polymers, is of general interest for (co)processing and orientation of different electronic polymers simultaneously into films or filaments. Detailed optical and electronic characterization reveals that films processed from organogels exhibit ground-state electron transfer (GSET) enabled by suitably positioned highest occupied molecular orbital (HOMO) and LUMO energy levels of P(g42T-TT) (−4.07 eV) and PMePyDPPPyT2 (−4.20 eV), respectively. Furthermore, molecular interactions related to gelation and GSET do not appear to significantly influence the morphology of the polymer blend films.

This thesis contains investigations in two different areas, described under six chapters. Chapter 1 contains a broad introduction to the area of foldamers, while Chapters 2, 3, 4, and 5 deal with various novel classes of synthetic polymers which can form folded structures in solution utilizing different non-covalent interactions. Chapter 6 deals with a distinctly different topic, where the objective was to study the effect of phenyl ring location on the micellization properties of a series of isomeric cationic surfactants. Synthetic polymers typically adopt a random coil conformation in solution, which is primarily an entropy driven process. So the generation of well-defined secondary structures in synthetic polymers requires specific intra-chain inter-segment interactions that will give adequate enthalpic contribution to overcome the entropic penalty associated with the formation of well-ordered conformations. During the past decade, various research groups have made significant effort to understand the essential design elements that could enable secondary structure formation in synthetic macromolecules through intra-chain inter-segment interactions, such as hydrogen bonding, solvophobic and solvophilic interaction, acid-base interaction, bond angle constraint, steric interaction, charge-transfer interaction, metal-ion complexation etc.1 Gellman2 first used the term “foldamer” to describe “any polymer with a strong tendency to adopt a specific compact conformation” which was more precisely defined by Moore and coworkers3 as “any oligomer that folds into a conformationally ordered state in solution, the structures of which are stabilized by a collection of non-covalent interactions between nonadjacent monomer units” and where the folded conformation is one of the various possible conformations. Several classes of foldamers have been studied during the past decade; a majority of them are well-defined oligomers that possess relatively restricted conformational degrees of freedom. Relatively fewer studies have explored conformational control in flexible high molecular weight polymers that possess greater conformational freedom.4 A few years ago, Ghosh et al. designed a polymeric system wherein charge-transfer interactions between alternatively placed electron-rich and electron-deficient aromatic units, aided by metal-ion complexation and solvophobic interactions, causes the polymer chain to adopt a specific folded conformation.5 Such charge-transfer induced folding was first studied by Iverson and co-workers6 in well-defined oligomers and was later elaborated by Zhao et al.7 to generate alternate designs to fold oligomeric systems. In all these studies, the C-T interactions served not only to assist the folding process but it also served as a valuable spectroscopic signature to study the folding process. The objectives of the present study are to develop simple synthetic strategies to generate different types of polymers that could be fold in solution using various noncovalent interactions. We have developed a simple synthetic strategy to design a new type of donor (1,5-dialkoxynaphthalene-DAN) containing polymer that carries a tertiary amine unit in the spacer segment, which could interact strongly with a suitably designed acceptor (pyromellitic diimide-PDI) bearing folding agent that carries a carboxylic acid group, as shown in Scheme 1.8 This acid-base interaction, brings the acceptor unit in a suitable position so as to form a C-T complex with the adjacent donors, resulting in the folding of the polymer chain. The folded conformation was studied using UV-vis and NMR spectroscopy and the folding propensities were rationalized using DFT studies. The highest association constant between the folding agent and the polymer was estimated to be around 1200 M-1. Scheme 1. Schematic representation of folding aided by two-point interactions with a folding agent. This value of association constant was not adequate to realize some potentially interesting properties in solid state. In an attempt to develop alternate systems, that could exhibit stronger propensity to fold, we designed a new type of cationic ionene,9 wherein electron-rich (DAN) and electron-deficient (PDI) aromatic units were included within the alkylene segments in an alternating fashion, as shown in Scheme 2.10 The charge-transfer (C-T) interaction between the donor and acceptor units in neighbouring segments of the ionene not only reinforced the transition to the collapsed nano-bundle form but also provides a useful spectroscopic handle to monitor the conformational change. The UV-visible spectra of these novel D-A ionene solutions at a fixed concentration in four different solvents, namely water, methanol, acetonitrile and DMSO, show different extents of charge-transfer interaction. The colour of the solution in water was deep-red, whereas in acetonitrile, it was light-yellow. The conformational transition could also be induced by titrating an acetonitrile solution of the ionene with increasing amounts of water causing a dramatic increase in the intensity of the charge-transfer band, which reflects the extent of collapse to the zig-zag state that brings the donor and acceptor units together. AFM studies confirmed the presence of flat pancake-like aggregates having nearly constant height of about 3-5 nm, which was in accordance with the estimated thickness of the postulated zig-zag structure. Scheme 2. Schematic depiction of folding of D-A ionene (left), AFM micrograph showing pancake-like aggregates of D-A ionenes (right-top), a line scan depicting the heights and diameters of the aggregates along with a schematic depiction of the aggregate (right-bottom). Scheme 3. Schematic representation of folding aided by interactions with a folding agent. In order to explore this concept further, we designed a two component system wherein the solvophobically-driven collapse of a DAN-containing ionene chain in a polar solvent is reinforced by intercalation with a suitably designed electron-deficient acceptor-containing external folding agent. DAN containing ionene polymer chains in polar solvent form an accordion-type zig-zag structure that brings adjacent donor units in close proximity; this provided an ideal hydrophobic pocket for intercalation of suitably designed electron-deficient acceptor molecules, the additional driving motivation for the intercalation being the formation of a C-T complex as shown in Scheme 3.11 Several acceptor-bearing molecules were prepared by the derivatization of pyromellitic dianhydride and naphthalene tetracarboxylic dianhydride with two different oligoethylene glycol monomethyl ether monoamines. UV-vis spectroscopic studies were carried out by using a 1:1 mixture of the DAN-ionenes and different acceptor molecules in water/DMSO solvent mixtures. The intensity of the charge-transfer (C-T) band was seen to increase with the water content in the solvent mixture, thereby suggesting that the intercalation is indeed aided by solvophobic effects. The naphthalene diimide (NDI) bearing acceptor molecules consistently formed significantly stronger C-T complexes when compared to the pyromellitic diimide (PDI) bearing acceptor molecules, which is a reflection of the stronger π-stacking tendency of the former. The highest association constant between the folding agent and the polymer was estimated to be around 4519 M-1, which was a substantial improvement over the earlier reported values.9 With a slight modification in the pendant group, we designed a water-soluble DAN-containing ionene, which can intercalate hydrophobic electron-deficient molecules, like TNT (2,4,6-trinitrotoluene), within the hydrophobic interstices between DAN units (as shown in Scheme 4), causing a depletion in fluorescence from the DAN units; TNT at concentration as low as 30 nM could be detected in this manner. Scheme 4. Schematic representation of folding of water soluble ionene and interactions with an electron-deficient hydrophobic moiety TNT. Scheme 5. Schematic representation of folded D-A allyl ionene. In light of the growing interest in single-chain polymeric nanoparticles, the fully collapsed D-A ionenes in water could be viewed as polymeric nanoparticles that are stitched together by reversible weak noncovalent interactions. In an attempt to transform the folded structure into a polymeric nanoparticle using covalent bonding, we designed D-A ionene that carries potentially polymerizable allyl units on the cationic head group instead of the dimethyl amine head group that was used in previous examples (as shown in Scheme 5). Preliminary studies showed that polymerization does not proceed readily; however, thiol-ene based clicking strategy enabled partial stitching of the folded segments, by the use of a suitably designed dithiol. In the last section of this thesis, we examined the effect of phenyl ring location on the micellization properties of a series of isomeric cationic surfactants, wherein the phenyl ring location was varied from head to tail region (as shown in Scheme 6).12 Thus, cationic surfactants (S1-S5) bearing a long alkyl chain that carries a 1,4phenylene unit and a trimethyl ammonium headgroup was synthesized and their solution properties were examined. Micellization behavior was studied using conductivity, ITC (Isothermal Titration Calorimetry), SANS (Small-Angle Neutron Scattering) and NMR. These present studies demonstrated that the presence of a large rigid ring near the hydrocarbon tail-end of the surfactant leads to a dramatic change in the micelle structure; the driving motivation to form micelles in such systems is greatly reduced and the micelles that are formed are relatively smaller and contain significantly fewer surfactants. NMR studies of micellar solutions of these surfactants indicate that the variation in the phenyl ring location may also help to probe the microenvironment at various depths within the micellar aggregates. Scheme 6. Structures of the various surfactant molecules carrying the 1,4-dioxyphenylene unit at different locations within hydrophobic segment (left), variation of CMC values (right). References (1) Foldamers - structure, properties, and applications, edited by Stefan Hecht and Ivan Huc, Wiley-VCH, 2007. (2) Gellman, S. H. Acc. Chem. Res. 1998, 31, 173. (3) Hill, D. J.; Mio, M. J.; Prince, R. B.; Huges, T. S.; Moore, J. S. Chem. Rev. 2001, 101, 3893. (4) (a) Wang, W.; Li, L. S.; Helms, G.; Zhou, H. H.; Li, A. D. Q. J. Am. Chem. Soc. 2003, 125, 1120. (b) Li, A. D. Q.; Wang, W.; Wang, L. Q. Chem. Eur. J. 2003, 9, 4594. (c) Neuteboom, E. E.; Meskers, S. C. J.; Meijer, E. W.; Janssen, R. A. J. Macromol. Chem. Phys. 2004, 205, 217. (d) Balbo Block, M. A.; Hecht, S. Macromolecules 2004, 37, 4761. (5) (a) Ghosh, S.; Ramakrishnan, S. Angew. Chem. Int. Ed. 2004, 43, 3264. (b) Ghosh, S.; Ramakrishnan, S. Angew. Chem. Int. Ed. 2005, 44, 5441. (6) Lokey, R. S.; Iverson, B. L. Nature 1995, 375, 303. (7) Zhao, X.; Jia, M. X. Jiang, X. K.; Wu, L. Z.; Li, Z. T.; Chen. G. J. J. Org. Chem. 2004, 69, 270. (8) De, S.; Koley, D.; Ramakrishnan, S. Macromolecules 2010, 43, 3183. (9) Williams, S. R.; Long, T. E. Prog. Polym. Sci. 2009, 34, 762. (10) De, S.; Ramakrishnan, S. Macromolecules 2009, 42, 8599. (11) De, S.; Ramakrishnan, S. Chem. Asian J. 2011, 6, 149. (12) De, S.; Aswal, V. K.; Ramakrishnan, S. Langmuir 2010, 26, 17882. (For structural formula pl see the abstract file.