1 |
Density-based unstructured simulations of gas-turbine combustor flowsAlmutlaq, Ahmed N. January 2007 (has links)
The goal of the present work was to identify and implement modifications to a density-based unstructured RANS CFD algorithm, as typically used in turbomachinery flows (represented here via the RoIIs-Royce 'Hydra' code), for application to Iow Mach number gas-turbine combustor flows. The basic algorithm was modified to make it suitable for combustor relevant problems. Fixed velocity and centreline boundary conditions were added using a characteristic based method. Conserved scalar mean and variance transport equations were introduced to predict scalar mixing in reacting flows. Finally, a flarnelet thermochemistry model for turbulent non-premixed combustion with an assumed shape pdf for turbulence-chemistry interaction was incorporated. A method was identified whereby the temperature/ density provided by the combustion model was coupled directly back into the momentum equations rather than from the energy equation. Three different test cases were used to validate the numerical capabilities of the modified code, for isothermal and reacting flows on different grid types. The first case was the jet in confined cross flow associated with combustor liner-dilution jetcore flow interaction. The second was the swirling flow through a multi-stream swirler. These cases represent the main aerodynamic features of combustor primary zones. The third case was a methane-fueled coaxial jet combustor to assess the combustion model implementation. This study revealed that, via appropriate modifications, an unstructured density-based approach can be utilised to simulate combustor flows. It also demonstrated that unstructured meshes employing nonhexahedral elements were inefficient at accurate capture of flow processes in regions combining rapid mixing and strong convection at angles to cell edges. The final version of the algorithm demonstrated that low Mach RANS reacting flow simulations, commonly performed using a pressure-based approach, can successfully be reproduced using a density-based approach.
|
2 |
Combustion Instability Mechanism of a Reacting Jet in Cross Flow at Gas Turbine Operating ConditionsPent, Jared 01 January 2014 (has links)
Modern gas turbine designs often include lean premixed combustion for its emissions benefits; however, this type of combustion process is susceptible to self-excited combustion instabilities that can lead to damaging heat loads and system vibrations. This study focuses on identifying a mechanism of combustion instability of a reacting jet in cross flow, a flow feature that is widely used in the design of gas turbine combustion systems. Experimental results from a related study are used to validate and complement three numerical tools that are applied in this study – self-excited Large Eddy Simulations, 3D thermoacoustic modeling, and 1D instability modeling. Based on the experimental and numerical results, a mechanism was identified that included a contribution from the jet in cross flow impedance as well as an overall jet flame time lag. The jet impedance is simply a function of the acoustic properties of the geometry while the flame time lag can be separated into jet velocity, equivalence ratio, and strain fluctuations, depending on the operating conditions and setup. For the specific application investigated in this study, it was found that the jet velocity and equivalence ratio fluctuations are important, however, the effect of the strain fluctuations on the heat release are minimal due to the high operating pressure. A mathematical heat release model was derived based on the proposed mechanism and implemented into a 3D thermoacoustic tool as well as a 1D instability tool. A three-point stability trend observed in the experimental data was correctly captured by the 3D thermoacoustic tool using the derived heat release model. Stability maps were generated with the 1D instability tool to demonstrate regions of stable operation that can be achieved as a function of the proposed mechanism parameters. The relative effect of the reacting jet in cross flow on the two dominant unstable modes was correctly captured in the stability maps. While additional mechanisms for a reacting jet in cross flow are possible at differing flow conditions, the mechanism proposed in this study was shown to correctly replicate the stability trends observed in the experimental tests and provides a fundamental understanding that can be applied for combustion system design.
|
3 |
Numerical Modeling of Pollutant Dispersal from Watercraft Exhaust SystemsKISHORE, ARAVIND 28 August 2008 (has links)
No description available.
|
4 |
LES of Multiple Jets in Cross-Flow Using a Coupled Lattice Boltzmann-Navier-Stokes SolverFeiz, Homayoon 14 November 2006 (has links)
Three-dimensional large-eddy simulations (LES) of single and multiple jets in cross-flow (JICF) were conducted using the 19-bit Lattice Boltzmann Equation (LBE) method coupled with a conventional Navier-Stokes (NS) finite-volume scheme. In this coupled LBE-NS approach, the LBE-LES was employed to simulate the flow inside jet nozzles, while the NS-LES was used to simulate the cross-flow. The key application area was to study the micro-blowing technique (MBT) for drag control similar to recent experiments at NASA/GRC.
A single jet in the cross-flow case was used for validation purposes, and results were compared with experimental data and full LBE-LES simulation. Good agreement with data was obtained. Transient analysis of flow structures was performed to investigate the contribution of flow structures to the counter-rotating vortex pair (CRVP) formation. It was found that both spanwise roller (at the lee side of the jet) and streamwise vortices (at the jet-side) contribute to the generation of the CRVP. Span-wise roller at the corner of the jet experiences high spanwise vortex compression as well as high streamwise vortex stretch. As a result, they get realigned, mix with the jet-side streamwise vortices, and eventually generate the CRVP.
Furthermore, acoustic pulses were used to test the proper information exchange from the LBE domain to the NS domain, and vice-versa. Subsequently, MBT over a flat plate with porosity of 25 percent was simulated using nine jets in a compressible cross-flow at a Mach number of 0.4. Three cases with injection ratios of 0.003, 0.02 and 0.07 were conducted to investigate how the blowing rate impacts skin friction. It is shown that MBT suppressed the near-wall vortices and reduced the skin friction by up to 50 percent. This is in good agreement with experimental data.
|
5 |
Numerical and experimental study of a hydrogen gas turbine combustor using the jet in cross-flow principleRecker, Elmar 26 March 2012 (has links)
Control of pollutants and emissions has become a major factor in the design of modern combustion systems. The “Liquid Hydrogen Fueled Aircraft - System Analysis” project funded in 2000 by the European Commission can be seen as such an initiative. Within the framework of this project, the Aachen University of Applied Sciences developed experimentally the “Micromix” hydrogen combustion principle and implemented it successfully in the Honeywell APU GTCP 36-300 gas turbine engine. Lowering the reaction temperature, eliminating hot spots from the reaction zone and keeping the time available for the formation of NOx to a minimum are the prime drivers towards NOx reduction. The “Micromix” hydrogen combustion principle meets those requirements by minimizing the flame temperature working at small equivalence ratios, improving the mixing by means of Jets In Cross-Flow and reducing the residence time in adopting a combustor geometry that provides a very large number of very small diffusion flames. In terms of pollutant emissions, compared to the unconverted APU, an essential reduction in emitted NOx was observed, stressing the potential of this innovative burning principle.<p>The objective of this thesis is to investigate the “Micromix” hydrogen combustion principle with the ultimate goal of an improved prediction during the design process. Due to the complex interrelation of chemical kinetics and flow dynamics, the “Micromixing” was analyzed first. Stereoscopic Particle Image Velocimetry was used to provide insight into the mixing process. A “simplified” set-up, that allowed to investigate the flow characteristics in great detail while retaining the same local characteristics of its “real” counterparts, was considered. The driving vortical structures were identified. To further investigate the physics involved and to extend the experimental results, numerical computations were carried out on the same “simplified” set-up as on a literature test case. In general, a number of physical issues were clarified. In particular, the interaction between the different vortical structures was looked into, and a kinematically consistent vortex model is proposed. After demonstrating the development of the mixing, the “cold flow” study was extended to a single injector. The double backward-facing step injector geometry was addressed experimentally and numerically. At design geometry, the flow appeared to behave single backward-facing like, with respect to the first gradation. In terms of varying step configurations, the flow was seen to be dependent on the periodic perturbation arising from the graded series of backward-facing steps. During the second part of the investigation, the “hot flow” was analyzed. Considering combustor similar operating conditions, a test burner was experimented on an atmospheric test rig. NOx emissions were traced by exhaust gas analysis for different working conditions. Particular flame patterns, such as a regular attached flame as well as lifted flames were observed. In parallel with the experimental work, numerical computations on a pair of opposite injectors, permitted to classify the combustion regime and the main factors involved in the NOx formation. Accordingly, NOx emission enhancing design changes are proposed. Finally, the demanding computational effort, worthy of acceptance for academic purposes, is found not agreeable as future design tool and improvements to speed up the design process are projected.<p> / Doctorat en Sciences de l'ingénieur / info:eu-repo/semantics/nonPublished
|
6 |
Enhanced Flame Stability and Control: The Reacting Jet in Vitiated Cross-Flow and Ozone-Assisted CombustionPinchak, Matthew D. 07 June 2018 (has links)
No description available.
|
7 |
Étude et analyse numérique d’un jet chaud débouchant dans un écoulement transverse en utilisant des simulations aux échelles résolues / Numerical investigations on a hot jet in cross flow using scale-resolving simulationsDuda, Benjamin Markus 19 September 2012 (has links)
Des méthodes numériques sont présentées qui permettent la simulation de jets chauds débouchants dans un écoulement transverse aux grands nombres de Reynolds et aux rapports des vitesses faibles. Différentes approches pour la modélisation de turbulence, c'est-à-dire URANS, SAS, DDES et ELES, sont validées par comparaison à des données expérimentales pour une configuration générique, soulignant la nécessité de résoudre les différentes échelles turbulentes pour une prévision correcte du mélange thermique. L'analyse de la solution instationnaire permet l'identification de processus dynamiques intrinsèques ainsi que des phénomènes de mélange et l'application de l'analyse en composantes principales révèle l'ondulation latérale du sillage de jet. Du fait du caractère multi-échelles qui se manifeste dans la simulation d'un jet débouchant sur une configuration avion, l'approche séquentielle basée sur le modèle SAS est mise en place. Comme les résultats pour la sortie d'un système de dégivrage de nacelle sont en bon accord avec les données d'essai en vol, cette approche est finalement appliquée à la sortie complexe d'un système de pre-cooler, mettant en valeur sa capacité à être appliquée dans un processus industriel. / Numerical methods for the simulation of hot jets in cross flow at high Reynolds numbers and small momentum ratios are presented. Different turbulence modeling strategies, i.e. URANS, SAS, DDES and ELES, are validated against experimental data on a generic configuration, highlighting the necessity of scale-resolution for a correct prediction ofthermal mixing. The analysis of transient flow simulations allows the identification of inherent flow dynamics as well as mixing phenomena and the application of the Proper Orthogonal Decomposition revealed the lateral wake meandering as being one of them. Due to the multi-scale problem which arises when simulating jets in cross flow on real aircraft configurations, the sequential approach based on the SAS turbulence model is introduced. As results for the exhaust of a nacelle anti-icing system comprising multiple jets in cross flow agree well with flight test data, the approach is applied in a last step to the complex exhaust of a pre-cooling system, emphasizing the capabilities of this methodology in an industrial environment.
|
8 |
Optimization and testing of a low NOx hydrogen fuelled gas turbineBorner, Sebastian 08 April 2013 (has links)
A lot of research effort is spent worldwide in order to reduce the environmental impact of the transportation and power generation sector. To minimize the environmental pollution the role of hydrogen fuelled gas turbines is intensively discussed in several research scenarios, like the IGCC-technology or the application of hydrogen as large scale storage for renewable energy sources. The adaptation of the applied gas turbine combustion chamber technology and control technology is mandatory for a stable and secure low NOx operation of a hydrogen fuelled gas turbine.<p>The micromix combustion principle was invented at Aachen University of Applied Sciences and achieves a significant reduction of the NOx-emissions by the application of multi miniaturized diffusion-type flamelets. Based on the research experiences, gained during the two European hydrogen research programs EQHHPP and Cryoplane at Aachen University of Applied Sciences, the intention of this thesis was to continue the scientific research work on low NOx hydrogen fuelled gas turbines. This included the experimental characterization of the micromix combustion principle, the design of an improved combustion chamber, based on the micromix combustion principle, for industrial gas turbine applications and the improvement of the gas turbine’s control and metering technology.<p>The experimental characterization of the micromix combustion principle investigated the impact of several key parameters, which influence the formation of the NOx-emissions, and allows therefore the definition of boundary conditions and design laws, in which a low NOx operation of the micromix combustion principle is practicable. In addition the ability of the micromix combustion principle to operate at elevated energy densities up to 15 MW/(m2bar) was successfully demonstrated. The improved combustion chamber design concept includes the experiences gained during the experimental characterization and covers the industrial needs regarding scalability and manufacturability.<p>The optimization and testing is done with an Auxiliary Power Unit GTCP 36-300. The original kerosene fuelled gas turbine was modified for the hydrogen application. Therefore several hardware and software modifications were realized. The improved gas turbine’s control and metering technology enables stable and comparable operational characteristics as in kerosene reference. An improved hydrogen metering unit, which is controlled by the industrial Versatile Engine Control Box, was successfully implemented. <p>The combination of the micromix combustion technology and of the optimized control and metering technology allows a stable, secure and low NOx hydrogen fuelled gas turbine operation.<p> / Doctorat en Sciences de l'ingénieur / info:eu-repo/semantics/nonPublished
|
9 |
Jet/Wall Interaction: An Experimental Study with Applications to VSTOL Aircraft Ground EffectsEl-Okda, Yasser Mohamed 07 May 2002 (has links)
The flow field of a twin jet impinging on ground plane with and without free-stream and at low jet-height-to-diameter ratios was investigated using the Particle Image Velocimetry (PIV) technique. Detailed, time-averaged flow field data are obtained via the high-resolution and the high-sampling rate instantaneous velocity field that is made available via the PIV technique.
A model of twin jet issuing from 0.245m circular plate, with 0.019m jet exit diameter, and with jet span to diameter ratio of 3.0 is placed in a water tunnel with the jets in tandem arrangement with respect to the free-stream. The recently upgraded PIV system, in the ESM department fluid mechanics laboratory at VA-Tech, allowed us to capture instantaneous velocity field images of about 0.076m x 0.076m, at 512(H)x512(V) frame resolution. Sampling rates of 1000 and 1200 fps were employed.
Understanding the flow field at lower heights is of crucial significance to the VSTOL aircraft application. Huge jet thrust is required to initiate the take-off operation due to the high lift loss encountered while the airframe is in proximity to the ground. Therefore, jet-height-to-diameter ratios of 2 and 4 were employed in this study. Jet-to-free-stream velocity ratios of 0.12, 0.18 and 0.22 were employed in addition to the no-free-stream case.
In the current study, only time-averaged flow field properties were considered. These properties were extracted from the available instantaneous velocity field data. In order to provide some details in the time-averaged velocity field, the data were obtained along several planes of interrogation underneath the test model in the vicinity of the twin jet impinging flow. Images were captured in a single plane normal to the free-stream and five planes parallel to the free-stream.
A vortex-like flow appears between the main jet and the fountain upwash. This flow is found to experience spiral motion. The direction of such flow spirals is found to be dependent on the jet exit height above the ground, and on the jet-to-free stream, velocity ratios. The flow spirals out towards the vortex flow periphery and upon increasing the free-stream it reverses its direction to be inward spiraling towards the core of the vortex. The flow reversal at certain height of the jet above the ground depends on the free-stream velocity.
In our discussion, more emphasis is given to the case of jet-height-to-diameter ratio of two. We also found that the largest turbulent kinetic energy production rate is found to be at the fountain upwash formation zone. / Master of Science
|
10 |
Modélisation de paroi et injection de turbulence pariétale pour la Simulation des Grandes Echelles des écoulements aérothermiques / Wall modeling and turbulent inflow generation for the Large Eddy Simulation of aerothermal flows.Bocquet, Sébastien 02 October 2013 (has links)
Lors du développement d’un nouvel avion, l’estimation des échanges d’énergie entre l’air ambiant et les parois est une donnée cruciale pour la conception aérothermique. Cette conception repose de plus en plus sur des simulations numériques mais certains phénomènes d’aérothermique externe, comme le jet débouchant du système de dégivrage des nacelles moteur, montrent les limites des modèles RANS classiques. La simulation des grandes échelles (LES) se révèle bien adaptée à ce type de phénomène mais se heurte à un coût de calcul extrêmement élevé pour ces écoulements pariétaux à très grand nombre de Reynolds. Pour lever cette limitation, cette thèse propose l’étude de deux briques fondamentales : la LES avec loi de paroi (WMLES) conjuguée à l’injection d’une couche limite turbulente à l’entrée du domaine. Pour une meilleure compréhension et une utilisation fiable de l’approche loi de paroi, on se concentre tout d’abord sur les sources d’erreur qui lui sont associées. Après les avoir identifiées, on propose une correction de l’erreur de sous-maille ainsi qu’une loi de paroi adaptée aux écoulements compressibles. Grâce à ces deux éléments, on obtient une estimation correcte du flux de chaleur pariétal sur des simulations WMLES de canal plan supersonique sur parois froides. Puis, pour préparer la transition vers des applications plus industrielles, on introduit un schéma numérique plus dissipatif ce qui nous permet d’étudier l’influence de la méthode numérique sur l’approche loi de paroi. Dans une seconde partie dédiée à l’injection de couche limite pour la WMLES, on sélectionne une méthode basée sur l’injection de perturbations combinée à un terme de contrôle volumique. On montre que des simulations WMLES utilisant cette méthode d’injection permettent d’établir une couche limite turbulente réaliste à une courte distance en aval du plan d’entrée, à la fois sur une plaque plane mais également sur un écoulement de jet débouchant à la géométrie plus complexe, représentative d’un cas avion. / During the design of a new aircraft, the prediction of energy exchanged between the ambient air and the aircraft walls is crucial regarding aerothermal design. Numerical simulations plays a role of increasing importance in this design. However classical RANS models reach their limits on some external aerothermal flows, like the jet-in-cross-flow from the anti-icing system oh the engine nacelles. The large eddy simulation (LES) is well suited to this kind of flow but faces an extremely large computational cost for such high Reynolds number wall-bounded flows. To remove this limitation, we propose two building blocks: the Wall Modeled LES (WMLES) combined with a turbulent inflow generation. For a better understanding and a reliable use of the WMLES, we first focus on the sources of error related to this approach. We propose a correction to the subgrid-scale error as well as a wall model suitable for compressible and anisothermal flows. Thanks to these two elements, we correctly predict the wall heat flux in WMLES computations of a supersonic isothermal-wall channel flow. Then, to allow the computation of more industrial flows, we introduce some numerical dissipation and study its effect on the wall modeling approach. The last part is dedicated to turbulent inflow generation for WMLES. We select a method based on synthetic perturbation combined with a dynamic control term. We validate this method on WMLES computations of a flat plate turbulent boundary layer and a hot jet-in-cross-flow representative of an industrial configuration. In both cases, we show that a realistic turbulent boundary layer is generated at a small distance downstream from the inlet plane.
|
Page generated in 0.0408 seconds