Spatio-temporal control of the self-ordered structures by use of the time-dependent oscillatory fields of zero-time average, either deterministic (temporally regular) or noisy (temporally irregular) ones, has today become a fundamental field of multidisciplinary research in a wide variety of the highly nonlinear systems of the different physical origin. The self-ordered bistable fronts in the essentially dissipative systems of the reaction-diffusion type, that are formulated by parabolic partial differential equations, are investigated in the dissertation. The objective of the research is to investigate new possibilities of controlling the directed net motion of the self-ordered bistable fronts by the deterministic and stochastic zero-mean ac forces using computer modeling and analytic tools. In order to achieve the objective mathematical and numerical models were applied, computer software was created and new possibilities of controlling the directed net motion of bistable fronts by use of the zero-average periodic, quasi-periodic and bounded noise fields were investigated. / Savaime susidarančių lokalizuotų struktūrų valdymas deterministiškai (reguliariai) arba stochastiškai (atsitiktinai) osciliuojančiais laukais, kurių vidutinė vertė yra nulis, yra plačiai paplitęs įvairiose terpėse. Disertacijoje nagrinėjami savame susidarantys bistabilūs frontai disipatyviose sistemose, kurios aprašomos netiesinėmis parabolinėmis diferencialinėmis lygtimis su dalinėmis išvestinėmis. Disertacijos tikslas yra ištirti kryptingo bistabilių frontų dreifo valdymo nuliniais laukais galimybes, taikant kompiuterinį modeliavimą bei analitinius metodu. Tikslui pasiekti buvo sudaryti matematinis bei skaitinis modeliai, sukurta programinė įranga ir skaitiškai ištirtos savaiminių bistabilių frontų valdymo galimybės, naudojant periodinius, kvaziperiodinius ir stochastinius nulinius laukus.

Savaime susidarančių lokalizuotų struktūrų valdymas deterministiškai (reguliariai) arba stochastiškai (atsitiktinai) osciliuojančiais laukais, kurių vidutinė vertė yra nulis, yra plačiai paplitęs įvairiose terpėse. Disertacijoje nagrinėjami savame susidarantys bistabilūs frontai disipatyviose sistemose, kurios aprašomos netiesinėmis parabolinėmis diferencialinėmis lygtimis su dalinėmis išvestinėmis. Disertacijos tikslas yra ištirti kryptingo bistabilių frontų dreifo valdymo nuliniais laukais galimybes, taikant kompiuterinį modeliavimą bei analitinius metodu. Tikslui pasiekti buvo sudaryti matematinis bei skaitinis modeliai, sukurta programinė įranga ir skaitiškai ištirtos savaiminių bistabilių frontų valdymo galimybės, naudojant periodinius, kvaziperiodinius ir stochastinius nulinius laukus. / Spatio-temporal control of the self-ordered structures by use of the time-dependent oscillatory fields of zero-time average, either deterministic (temporally regular) or noisy (temporally irregular) ones, has today become a fundamental field of multidisciplinary research in a wide variety of the highly nonlinear systems of the different physical origin. The self-ordered bistable fronts in the essentially dissipative systems of the reaction-diffusion type, that are formulated by parabolic partial differential equations, are investigated in the dissertation. The objective of the research is to investigate new possibilities of controlling the directed net motion of the self-ordered bistable fronts by the deterministic and stochastic zero-mean ac forces using computer modeling and analytic tools. In order to achieve the objective mathematical and numerical models were applied, computer software was created and new possibilities of controlling the directed net motion of bistable fronts by use of the zero-average periodic, quasi-periodic and bounded noise fields were investigated.

Darbo tikslas – naudojant kompiuterinį modeliavimą ištirti, kaip formuojasi temperatūriniai laukai didelėse erdvėse šalia šaltų įstiklintų paviršių, ir nustatyti, koks šildymo būdas labiausiai tinka mikroklimato parametrų užtikrinimui tokiose patalpose. Pasirinkus kompiuterinį programinį paketą SolidWorks ® Flow Simulation skirtingų aukščių patalpose sumodeliuotas ir išnagrinėtas temperatūrų pasiskirstymas prie įvairių įstiklintų paviršių, esant skirtingoms šildymo sistemoms. Darbe išanalizuoti 14 variantų patalpų, turinčių skirtingą įstiklinimo plotą, modeliai. Jose sumodeliuotos radiatorinio, grindinio ir orinio šildymo sistemos. Darbą sudaro įvadas ir problemos analizė, tikslo ir uždavinių jam pasiekti parinkimas, literatūros šaltinių apžvalga, tiriamų objektų analizė, modeliavimo programinų paketų apžvalga ir tinkamiausio programinio paketo pasirinkimas, modeliavimo rezultatų aptarimas ir išvados, informacijos šaltiniai, priedai. Nustatyta, kad geriausias šildymo būdas patalpoms su dideliais įstiklintais paviršiais yra radiatorinis. Darbo apimtis – 81 psl. teksto be priedų, 65 iliustr., 5 lent., 49 bibliografiniai šaltiniai, 2 priedai. / The assignment of this project is to investigate the forming of various temperature fields in large volumes next to cool glazed surfaces using digital modelling and determine the most efficient heating system solution for ensuring microclimate parameters in such accommodations. The heat distribution in various height spaces next to changing size glazed surfaces is modelled and analysed using SolidWorks ® Flow Simulation software package, comparing the results of several different heating systems. In this paper are analyzed 14 models of accommodations with changing size glazed surfaces, every with one or more of three: radiator, floor and air heating system. This paper consists of introduction, problem analysis, main objective and tasks to achieve it selection, source literature review, investigated objects analysis, modelling software packages review and a choice of the most suitable, simulations results interpretation and conclusion, references and appendixes. It was determined that most suitable heating system for indoor spaces with large glazed surfaces is radiator one. This paper consists of 81 pages of text, 65 pictures, 5 tables, 49 references, 2 appendixes.

Master’s thesis on “Simulation of processes in physic of solid state using computer programs” consists of an introduction, 3 chapters, conclusions, 22 references of literature, 15 appendixes and 1 compact disc. There are presented 3 tables and 31 pictures in the work as well. The work comprises 56 pages (with appendixes there are 93 pages). The aim of this work is seeking to create demonstrations for lectures in physic of solid state using the mathematical computer system. The first chapter deals with the possibility to use the computer programs in simulation of varied processes and phenomena and put into practice at lectures of solid state physics. The second chapter deals with particular phenomena. There are described the simulations of these phenomena as well. The computer mathematical system MathCAD was used to simulate and analyze the density of band states, Fermi – Dirac and Bolcman functions in the various temperature (5 K < T < 500 K). If we use the state destiny, Fermi – Dirac and Bolcman functions, we will get a distribution of free electrons by values of energy. Dynamic graph of functions is presented, which shows a variation probability of electron to be in E energy state subject to variations of temperature T. There is analyzing dependence of molar heat of solid state against to temperature T. The simulation of Fermi layer and concentration of charge at intrinsic and at impurity semiconductor are composed in this work as well. The using of simulations in lectures... [to full text]

This master thesis analyses principle manufacturing order design and management methods and schemas. They are practicaly applied in developing software for product‘s graphical-informational model management, feature management, technological data and rules specification and description, product‘s material list creation and estimation. The developed software is suited for both large and small manufacturing corporations, that specializes in plastic or wooden windows, doors, garage gates, glass fillings production. The system may be adjusted to various manufacturing technologies. These software development methods and technologies were applied during system design and implementation: Dynamic System Development Method (DSDM), Object Oriented (OO) Design and Programming, Component Based System Engineering Method (CBSE), Computer-Aided Design/Computer-Aided Manufacturing Methods, eXtensible Markup Language (XML). Created software was tested with real technological data. Systems suites functional and non-functional specifiaction. Experimets show that the product is more flexible than it‘s previous version.

The main purpose of the Master paper is to make fire investigations analysis, to find its problems ant find a way to solve them. Also suggest new alternative fire investigation methods. In the first part of my work I studied fire investigation analysis disputed all the methods of fire investigation used in Lithuania. I found and disputed limitations of fire investigation methods and found few solutions for them. I describe new alternative fire investigation methods used abroad. In the second part of my work I have analyzed new fire investigation method- fire dynamic simulator. I Studied principles and use opportunities of FDS- MOKEWIEV and SMARTFIRE programs. In the third part I wrote few concrete examples when these two fire dynamic simulation programs were used. I have also described test computation with SMARTFIRE fire dynamic simulator. I have wrote conclusions and suggested about fire investigation.