No description available.

Abstract Manufacturing companies have reorganised their value chains and outsourced their non-core activities at an increasing rate during the last two decades. The importance of subcontractors has grown both from the economic and production point of view. The new manufacturing paradigm that emphases outsourcing, co-operation, networking and agility is much discussed on the general level, but very little empirical research has been done on these issues. The main aim of the study is to increase the understanding of the evolution process of subcontracting chains and explain the managerial aspects connected with the subcontractors' evolution. In the theoretical part I of the study, the concepts of subcontracting are clarified. The forms to classify subcontractors are discussed as the structure and development of subcontracting systems. The lean supply philosophy and manufacturing strategy concept are presented as a basis for the study. The manufacturing strategy framework for subcontractors is presented. The empirical findings of this study are based on longitudinal case studies covering the time period from the early 1980's to the late 1990's. Three cases from the metal and electronics industry including an OEM and a few subcontractors are presented. The studies focuses on the factors affecting the evolution of subcontracting, especially the impacts of subcontractors' manufacturing strategy on supply chain decisions. The implications of the case studies allow a number of conclusions to be drawn. The main differences from the lean supply theory was in supplier development and supply chain management practices The production volume, product structure and supplier base were the most important points affecting the subcontracting chain structure. The process of assigning manufacturing to subcontractors happened gradually and included critical points, which should be evaluated. The evolution process of subcontractors from a part supplier towards a system supplier is discussed. The competitiveness of the subcontractors evolves gradually starting from quality and adding other capabilities. In order to develop the subcontracting chain the stage of evolution of subcontractors should be recognised. A conceptual model for four different stages, part, component, specialist and system supplier, was also created in this study.

Today's world is characterized by volatility and uncertainty. Cooperation is needed to survive in this harsh business climate. Cooperation in supply chains are practiced and well known but in today's tough and volatile environment it is simply not enough. Wastes and unnecessary processes have to be eliminated to secure a competitive advantage. Incorporating lean in supply chains get more and more attention and embrace in the modern literature and media. Lean implemented in supply chains is praised to create a proactive supply chain that successfully eliminate waste and create efficiency. In the thesis the negative aspects, the angle that is very seldom described in the literature, of incorporating lean in supply chain is researched. I will view lean from the management perspective and research the negative aspects, their cause and impact on the entire supply chain. Being aware of the criticism of lean from the employee and society perspective this research serves to find if lean from the management perspective is a flawless story. To achieve the aim of this thesis I conducted a survey research where 100 supply chain executives from different countries, different industries and of different designations within supply chain management were asked to share their lean experience. The summary of my research show that lean incorporated in supply chains is not only a sunshine story. I can conclude problems, even a mismatch, with the lean concept incorporated in supply chains- the time sensibility lean brings. In my research it became obvious that lean supply chains are very sensitive to delays and that the consequences of the delays will strike very hard - hence the lean supply chain can also be seen as more vulnerable and fragile compared to ordinary supply chains. There is no question about the fact that any company, any network of companies or a supply chain for that matter, are better off without delays. A delay will always be negative. In a lean environment, where time aspects such as Just-In-Time and a pull scenario are present, a delay will immediately ruin the entire execution and the consequences will naturally spread in the supply chain. In today's volatile and ever changing world I believe that leanness in supply chains are indeed needed but to an extent where the time factors are viewed realistically in order to avoid drastic consequences. My conclusion is that supply chains should be realistically lean, bearing the time factors of lean in mind, to avoid being mean. I encourage every supply chain to identify their lean level in order to avoid a mean result.

Submitted by Caio Vinícius Mazaro de Oliveira (caio.mazaro4@gmail.com) on 2018-05-07T17:14:58Z No. of bitstreams: 1 CaioOliveira_PGAD_TUPA_fevereito2018.pdf.pdf: 2238562 bytes, checksum: 4ea0ca28386966e61e61aa15bfae4927 (MD5) / Approved for entry into archive by Eliana Katia Pupim (katiapupim@tupa.unesp.br) on 2018-05-08T14:29:44Z (GMT) No. of bitstreams: 1 oliveira_cvm_me_tupa.pdf: 2238562 bytes, checksum: 4ea0ca28386966e61e61aa15bfae4927 (MD5) / Made available in DSpace on 2018-05-08T14:29:44Z (GMT). No. of bitstreams: 1 oliveira_cvm_me_tupa.pdf: 2238562 bytes, checksum: 4ea0ca28386966e61e61aa15bfae4927 (MD5) Previous issue date: 2018-02-08 / O Brasil está entre os países que mais exportam couro. O segmento de couro possui importante papel na contribuição do desenvolvimento econômico de várias cidades brasileiras. O estado de São Paulo é destaque na produção de couros, juntamente como o estado do Rio Grande do Sul. Neste processo ocorre o beneficiamento do couro, sendo repassado para indústrias que elaboram roupas, sapatos, acessórios, e diversos outros produtos. Essas organizações, denominadas de agroindústrias processadoras de couro, estão em busca de uma gestão eficiente, que contemple toda produção, visando o aumento do resultado financeiro, possibilitando a continuação da atividade. Para tanto, a redução de desperdícios e ganho na qualidade são requisitos fundamentais para essa gestão. Diante da carência de estudos, a presente pesquisa tem como objetivo geral diagnosticar por meio da Lean Supply Chain Management (LSCM) aspectos de melhoria na gestão do elo curtume da cadeia do couro do Oeste Paulista. A abordagem da LSCM sendo aplicada corretamente cumpre os requisitos buscados pelas organizações. Para atingir o objetivo da pesquisa, utilizou-se como método de pesquisa o estudo de caso do tipo múltiplo, com a condução de visitas in loco e aplicação de formulário em cinco Unidades de Pesquisa, caracterizando os portes das organizações, os tipos de processos que elas fazem, quais os elementos e pilares que mais precisam de suporte referente à abordagem empregada, quais as ferramentas utilizadas que se enquadram na LSCM e os benefícios e dificuldades da aplicação. Destacam-se como resultados da coleta de dados que os pilares da Gestão da Tecnologia de Informação, Gestão Logística e Melhoria Contínua são os que mais carecem de melhorias, necessitando empregar a tecnologia da informação na comunicação com os clientes, planejar a rede logística de distribuição, direcionar equipes de trabalho para melhoria contínua. Os planos de ação para elaborar como serão realizadas as ações supramencionadas são oportunidades de futuras pesquisas. / Brazil is among the countries that export the most leather. The leather segment plays an important role in the contribution of the economic development of several Brazilian cities. The state of São Paulo is prominent in the production of leather, along with the state of Rio Grande do Sul. In this process the leather is processed, being passed on to industries that manufacture clothes, shoes, accessories, and various other products. These organizations, called leather processing agroindustries, are in search of an efficient management that contemplates all production, aiming to increase the financial result, allowing the continuation of the activity. Therefore, waste reduction and quality gain are fundamental requirements for this management. In view of the lack of studies, the present research has as general objective to diagnose, through the Lean Supply Chain Management (LSCM), aspects of improvement in the management of the tannery chain link of the leather chain of Oeste Paulista. The LSCM approach being applied correctly meets the requirements sought by organizations. In order to reach the research objective, a multiple-case study was used as the research method, with the conduction of on-site visits and application of the form in five Research Units, characterizing the organizations' sizes, the types of processes that they do, which elements and pillars most need support regarding the approach employed, which tools are used that fit the LSCM, and the benefits and difficulties of the application. It is highlighted as results of data collection that the pillars of Information Technology Management, Logistics Management and Continuous Improvement are the ones that need the most improvement, needing to use information technology in communication with customers, to plan the distribution logistics network, to direct work teams for continuous improvement. The action plans to elaborate how the aforementioned actions will be carried out are opportunities for future research.

Orientador: Eduardo Guilherme Satolo / Resumo: A cadeia de produção do leite é composta por diversos agentes que integram a cadeia de suprimentos desde a aquisição da matéria-prima até a distribuição do produto para o cliente final. Esta cadeia tem importância em termos de contribuição econômica e social para o país ou região. Desta forma, a obtenção de produtividade não está relacionada apenas aos benefícios para o produtor, como aumento de lucratividade, competitividade no mercado, eficiência na gestão das propriedades, mas em aspectos que geram impactos na sociedade, como por exemplo geração de novos postos de trabalho. Este trabalho tem como objetivo geral, analisar quais os principais gargalos na gestão da cadeia de suprimentos leiteira de pequenos produtores da região de Tupã/SP. Desta forma, é indispensável explorar os impactos sofridos pelos produtores, a falta de apoio e orientação para que os mesmos consigam conduzir e realizar uma gestão eficiente em sua propriedade. Tal estudo apresenta a metodologia aplicada em forma de pesquisa de campo de caráter descritiva, com abordagem qualitativa, do tipo survey com aplicação de questionário com questões predominantemente fechadas com uso da escala Likert. O resultado da coleta foi apresentado por meio da análise de correspondência. Tais resultados demostraram os gargalos na cadeia de suprimentos, baseado nos oito pilares da abordagem LSCM, sendo: Gestão da Tecnologia da Informação, Gestão de Fornecedores de Insumos, Eliminação de desperdícios, Produção, Gestão de Relac... (Resumo completo, clicar acesso eletrônico abaixo) / Abstract: The milk supply chain is made up of products that integrate the supply chain from the raw material to the final distribution of the product to the end customer. This organization has an economic and social building base for the country or region. Thus, a strategy option is not only an advantage for the producer, such as the increase of profitability, market competitiveness, management performance of companies, but also the managerial impact on society, such as the generation of new jobs. This paper aims to analyze what are the main bottlenecks of the milk and milk industry of small farmers in the Tupã / SP region. Therefore, is necessary It is necessary to explore the impacts suffered by the producers, the lack of support and guidance for them to be able to conduct and efficiently manage their property. The study presents the applied method in the search fields, descriptive, with a qualitative approach, on the survey form, of general studies predominated closed to use the scale of Likert. The result of the collection was presented through the correspondence analysis. These results demonstrated bottlenecks in the supply chain, based on the eight pillars of the LSCM approach, namely: Information Technology Management, Input Supplier Management, Waste Disposal, Production, Customer Relationship Management, Logistics Management, Owners Commitment, and Continuous Improvement. Stands out the result of data collection for the need to improve quality, the implementation of technologi... (Complete abstract click electronic access below) / Mestre

Research questions: How should the supply chain within Micropower and Ecotec be coordinated in order to minimize the costs and keep a high customer service level?  1. What kinds of activities take place within the supply chain of Micropower and Ecotec and how are they coordinated? 2. What kinds of wastes can be identified and why do they occur? 3. What should be done in order to minimize these wastes?  Purpose: The overall purpose is to improve the coordination of the supply chain between the two facilities to minimize the airfreight without affecting the customer service level. The first objective is to define what kinds of activities take place within the supply chain and how they are coordinated with each other to identify the wastes. It will then be investigated why they occur. Finally, suggestions and solutions will be formulated to eliminate these wastes. Considering the expansion phase of the case company, the purpose of this thesis also covers general learnings for future supply chain setups with offshore subsidiaries.

Background: Lean has had a great influence on how companies work today, and both academics and practitioners have admitted its link with superior performance and the ability to create competitive advantage. There is however a widespread confusion of what lean really is and the absence of a clear definition has been highlighted by many researchers within the field. Since the birth of lean, a lot of focus has been on the internal perspective of the concept. Although today with an increased globalization, higher customer demands and a severe competition, the work with lean between companies becomes highly appropriate. Within companies, the processes often work effectively, but it is in the interfaces between companies where a lot of waste and possibilities to improvement exist. Aim: The purpose is to analyse the companies’ consciousness of lean and to what extent their understanding of lean can influence the effectiveness of the entire value stream. Furthermore, the purpose is to analyse how this consciousness affects the collaboration between a customer and a supplier. Method: The study has a deductive approach where the starting point has been in the theories within lean, supplier partnership and effectiveness. A multiple case study has been conducted where five different interfaces have been studied. The study has a qualitative approach where the empirical findings come from ten semi-structured interviews. Result: Our study shows that working with lean interorganisationally helps to create a higher performing value chain. For companies working with lean internally, it is also natural working with lean with the partners. From a lean perspective, effectiveness is defined as a reduction of cost through elimination of waste. By performing VSM, having regular evaluating meetings, sharing forecasts and giving each other insight in inventories, a lot of waste in the interfaces can be reduced. However, to have a well working collaboration, the study shows that a high level of trust and a common view and attitude towards collaboration are necessary.

En la presente tesis doctoral, se desarrolla y se valida una metodología de planificación de la red de distribución de cadenas de suministro de la industria de consumo masivo de alimentos envasados, que se ha estructurado tomando como base los conceptos lean y agile, desarrollados por diferentes autores en los últimos veinte años. Se define, también, las ventajas y limitaciones al aplicar esta metodología y compararla con la metodología de planificación tradicional, a fin de determinar si da mayor valor al cliente de este tipo de industria. El tema concluye con la validación de tres hipótesis, que validan la aplicabilidad de la metodología desarrollada y de los conceptos lean y agile en la industria de alimentos envasados, con ciertas limitantes establecidas en el desarrollo de la investigación. / The doctoral thesis, develop and validates a distribution net planning methodology of packaged foods consumer goods supply chain, that has been structured taking as it base the lean and agile concepts, developed by differents authors in the last twenty years. Also, it defines the advantages and limitations when applying this methodology and compare it with the traditional planning methodology, to end determine if it gives main value to the client of this type of industry. The thesis concludes with the validation of three hypotheses that validate the applicability of the methodology developed and of the concepts.

Environmental pollution is the major problem that mankind faces in present state, the major emission of toxic gases is from vehicles and manufacturing industries. The thesis study focuses on three different types of Small Scale Industries (SSI) in India that are bumper manufacturing industry, dyeing industry and food processing industry. The product life cycles of the process for each industry are identified and their final green waste disposal methods are investigated. The industries are identified with more lean wastes within their product life cycle process. The major green wastes from their disposal methods have high influence on environment. These wastes have to be reduced or eliminated by practicing a suitable supply chain. In present the companies doesn’t practice any supply chain in their organization. The implement of supply chain could reduce the environmental pressures and wastes of the companies to some extent. The lean wastes identified in the process could be eliminated by practicing suitable lean tools and methods. The final disposal wastes are considered to be the green wastes. The method of disposal practiced by the SSIs in India shows an evidence of how much they concern towards the environment. The research tries to explain some suitable waste management techniques for the industries and discusses about importance of government role on making this techniques possible. The small scale industries experiences both wastes, so it has to integrate lean for practicing green supply chain, the implementation of lean would pay a way for green supply chain management. As a result of it a comprehensive lean and green model is suggested for the industries because the model is composed of both lean and green waste reduction techniques and it also helps in achieving both lean and green business results.

ABSTRACT Due to the change of consumption patterns, the shorter product life cycle coupled with the global competitions, how to provide customers quickly the best quality of products and to maintain a certain profit in changing markets , become the best weapon when competitions. So companies have to put in efforts in supply chain management, from raw material supply to product sales, distribution, various species of strategies set to achieve the best management of the results. The most widely discussed and use of supply chain strategies , that is lean and agile strategies . The purpose of this study is to discuss the impact on supply chain capability and business performance with the implementation of lean strategy and agile strategy , and using the questionnaires, to specify the statistics showing the correspondence of lean /supply chain strategy and business performance.