Indiana University-Purdue University Indianapolis (IUPUI) / The geometric and electrochemical characteristics of different lithium ion batteries (LIBs) are investigated in this study. The core work is to study the impact of the calendering process on NMC cathode electrodes performance. X-ray CT image processing by Python, MATLAB, ImageJ and Avizo is utilized in this study. NMC electrodes with different calendering conditions were fabricated to calculate electrochemical properties of the cells. Charge/discharge of the electrodes under 0.1C, 0.2C, 0.4C, 1C, 2C, 4C and 0.1C (retention test) rates were cycled for three times respectively between 4.2 V and 3.0 V. Electrochemical impedance spectroscopy testing was used to further explain the effects of NMC density on rate capability. Geometric properties of NMC electrodes with different calendering conditions were calculated from the computed tomography data of the electrodes. A synchrotron transmission X-ray microscopy tomography system at the Advanced Photon Source of the Argonne National Laboratory was employed to obtain the tomography data. X-ray CT image processing before the data analysis was introduced. Python based Tomopy and ASTRA toolbox were used to filter the original HDF5 data and reconstruction. ImageJ was used to help remove noise, adjust contrast and cropping. Iso2mesh and image processing tool box were used in MATLAB to generate meshed 3D structure of CT data. Geometric properties of NMC electrodes including porosity, pore size distribution, particle size distribution, specific surface area and tortuosity were calculated from the computed tomography data of the electrodes. The geometric and electrochemical analysis show that calendering can increase the electrochemically active area, which lead to improving of the rate capability. However, more calendering will result in crushing of NMC particles, which can reduce the electrode capacity at relatively high C rates. This study shows that the optimum electrochemical performance of NMC electrode at 94:3:3 weight ratio of NMC:binder:carbon black can be achieved by calendering to 3.0 g/cm3 NMC density. LTAP solid electrolyte and NMC cathode material mix electrode-electrolyte X-ray CT data was studied in last chapter. By using 8 kev X-ray energy, we could distinguish NMC active material, LTAP solid electrolyte and the others three phase. On the basis of NMC electrode image processing method, dilation and multiply threshold method is applied to get three-phase 3D geometry. A comparing of connection area between NMC and LTAP of 700psi and 1300psi electrode was analyzed. Geometric properties like tortuosity, di_usion length and e_ective di_usivity were generated from the CT data.

<p>Lithium-ion batteries are regarded as the batteries that could potentially change the world. From consumer electronics and electric vehicles to energy storage systems and aerospace applications, Li-ion based batteries have become the norm. Although these batteries show a lot of promise to rid the world of several challenges in the future, there are still a few shortcomings of this battery that need to be addressed. It is also important to note the recent accidents caused due to the explosion of these lithium-ion batteries, to name a few: Samsung Galaxy Note 7 explosion, e-cigarettes battery explosion, overheating of lithium batteries present in Apple MacBook Pro laptop. This calls for a more reliable and accurate Battery Management System (BMS). One of the major shortcomings in today’s available battery management systems is the accuracy of the measurement of charge present in lithium-ion batteries, termed as State-of-Charge (SoC) and State-of-Energy (SoE) of the battery. </p> <p>To address this problem, a highly sensitive and a high-resolution system is developed to estimate the State-of-Charge based on the changes in impedance of a sensor coil which is caused due to the effect of Eddy Current Power Loss in the battery. The redox reaction taking place inside a battery suggest that lithium ions are exchanged back-and-forth between anode and cathode during an event of charging and/or discharging of the battery. This gives rise to change in electrical resistivity of the battery electrode materials. A sensor coil which is excited with an AC magnetic field induces Eddy currents on the internal components of the battery. Based on the change in resistivity of the electrode materials, eddy current and hence the power loss due to Eddy currents change. This in turn changes the complex impedance of the sensor coil, which is mapped to estimate the SoC of the battery. The results confirm the superiority of the proposed technique in terms of sensitivity, resolution, computational complexity and cost of the measured SoC in comparison with other existing methods of estimating SoC. This can be a potential method to estimate SoE of the battery as well. </p>

No description available.

京都大学 / 0048 / 新制・課程博士 / 博士(エネルギー科学) / 甲第17911号 / エネ博第283号 / 新制||エネ||59(附属図書館) / 30731 / 京都大学大学院エネルギー科学研究科エネルギー基礎科学専攻 / (主査)教授 佐川 尚, 教授 八尾 健, 教授 石原 慶一 / 学位規則第4条第1項該当 / Doctor of Energy Science / Kyoto University / DGAM

京都大学 / 0048 / 新制・論文博士 / 博士(理学) / 乙第12997号 / 論理博第1553号 / 新制||理||1604(附属図書館) / 32925 / (主査)教授 北川 宏, 教授 竹腰 清乃理, 教授 有賀 哲也 / 学位規則第4条第2項該当 / Doctor of Science / Kyoto University / DGAM

京都大学 / 0048 / 新制・課程博士 / 博士(工学) / 甲第20581号 / 工博第4361号 / 新制||工||1678(附属図書館) / 京都大学大学院工学研究科物質エネルギー化学専攻 / (主査)教授 安部 武志, 教授 作花 哲夫, 教授 阿部 竜 / 学位規則第4条第1項該当 / Doctor of Philosophy (Engineering) / Kyoto University / DGAM

京都大学 / 0048 / 新制・課程博士 / 博士(工学) / 甲第20630号 / 工博第4368号 / 新制||工||1679(附属図書館) / 京都大学大学院工学研究科物質エネルギー化学専攻 / (主査)教授 安部 武志, 教授 阿部 竜, 教授 作花 哲夫 / 学位規則第4条第1項該当 / Doctor of Philosophy (Engineering) / Kyoto University / DGAM

京都大学 / 0048 / 新制・課程博士 / 博士(工学) / 甲第20707号 / 工博第4404号 / 新制||工||1684(附属図書館) / 京都大学大学院工学研究科物質エネルギー化学専攻 / (主査)教授 安部 武志, 教授 阿部 竜, 教授 作花 哲夫 / 学位規則第4条第1項該当 / Doctor of Philosophy (Engineering) / Kyoto University / DGAM

京都大学 / 0048 / 新制・課程博士 / 博士(人間・環境学) / 甲第21432号 / 人博第870号 / 2018||人博||870(吉田南総合図書館) / 京都大学大学院人間・環境学研究科相関環境学専攻 / (主査)教授 内本 喜晴, 教授 田部 勢津久, 教授 吉田 鉄平 / 学位規則第4条第1項該当 / Doctor of Human and Environmental Studies / Kyoto University / DFAM

京都大学 / 0048 / 新制・課程博士 / 博士(工学) / 甲第21787号 / 工博第4604号 / 新制||工||1717(附属図書館) / 京都大学大学院工学研究科物質エネルギー化学専攻 / (主査)教授 安部 武志, 教授 作花 哲夫, 教授 阿部 竜 / 学位規則第4条第1項該当 / Doctor of Philosophy (Engineering) / Kyoto University / DGAM