Orientador: Prof. Dr. Carlos Eduardo Capovilla / Dissertação (mestrado) - Universidade Federal do ABC, Programa de Pós-Graduação em Engenharia Elétrica, 2015. / Este trabalho tem como escopo o projeto e implementação de indutores ativos integrados em tecnologia CMOS para operação em circuitos integrados de r'adio frequência. Tais sistemas demandam por indutores passivos integrados, sendo que estes geralmente apresentam baixa indutância, baixo fator de qualidade, e tamanhos relativamente grandes. Estes fatores são limitantes no projeto de circuitos integrados. Como alternativa, indutores ativos integrados têm sido propostos, com o uso de circuitos que emulam o efeito do indutor passivo convencional. Estes circuitos apresentam menor dimens¿ao, possibilidade de ajustes no valor da indut¿ancia, da frequ¿encia de opera¸c¿ao, do fator de qualidade, ao custo de consumo de pot¿encia DC e um relativo aumento no ru'ýdo total do sistema. Al'em de um profundo estudo, quatro topologias distintas de indutores ativos integrados foram abordadas e projetadas, em seguida foi projetado um VCO aplicando dois indutores ativos como ressonadores. Uma an'alise a n'ývel de projeto utilizando a t'ecnica de-embedding 'e aplicada no projeto de um indutor ativo. Os modelos dos componentes utilizados s¿ao baseados na biblioteca CMOS em alta frequ¿encia da foundry austr'ýaca AMS. / This study aimed to design and implement integrated active inductors in CMOS technology for operation in integrated radio frequency circuits. These systems demand for integrated passive inductors, and these usually have low inductance, low quality factor, and relatively large sizes. These factors are limiting in integrated circuit design. As an alternative integrated active inductors have been proposed, with the use of circuits that emulate the effect of conventional passive inductor. These circuits have smaller, the possibility for tuning the inductance value, the operation frequency, quality factor, at the cost of DC power consumption and a relative increase in total system noise. In addition to a thorough study, four different topologies ofintegrated active inductors were approached and designed, then was design a VCO applying two active inductors as resonators. An examination at the design level using the de-embedding technique is applied in the design of an active inductor. The models of the components used are based on CMOS library at high frequency of the Austrian foundry AMS.

Orientador: Prof. Dr. Carlos Eduardo Capovilla / Dissertação (mestrado) - Universidade Federal do ABC, Programa de Pós-Graduação em Engenharia Elétrica, 2017.

Nesta dissertação é apresentado o estudo dos transistores de porta flutuante (Floating Gate Transistor - FG Transistor), sua modelagem, e a análise do efeito da dose de ionização total (Total Ionizing Dose- TID) sobre os transistores FG. Para isto foi procurado e implementado um modelo de simulação elétrica do transistor FG em condições de leitura (análise DC), baseado no cálculo quantitativo da tensão na porta flutuante em função das tensões nos terminais do transistor, no valor de carga armazenado na porta flutuante e nos coeficientes de acoplamento capacitivo que apresentam este tipo de dispositivos. Para a análise do efeito TID, a tensão limiar do transistor MOS foi variada usando o método de simulação Monte Carlo, tendo em conta as variações da tensão limiar que apresentam os transistores FG submetidos na radiação ionizante. O estudo obteve como resultado a confirmação da perda de carga do FG à medida que é incrementada a dose de radiação, o que implica uma alteração na característica de retenção de carga que caracteriza as células de memórias não voláteis (Non Volatile Memory - NVM). / In this dissertation work, a study of the the floating gate Transistor (FG transistor) performed. The focus in the electrical modeling, and the analysis of the impact of the Total Ionizing Dose (TID) on the electrical performance of the device. Aiming electrical level simulation, different electric simulation models for the FG transistor in read conditions (DC analysis) were evaluated and the model best suited for implementation into the simulation tool was selected. The selected model is based on Floating Gate voltage calculation as a function of polarization voltage of the FG transistor terminals, the stored charge value in the Floating Gate and the capacitive coupling coefficient presented by this device. For the TID analysis the threshold voltage of the MOS transistor was shifted by means of a Monte Carlo simulation method, considering the threshold voltage variations when the FG transistor is subjected to the ionizing radiation.The analysis lead to the confirmation that the loss charge stored in the FG increases with the radiation dose, affecting the retention characteristics of the memory cells.

Nesta dissertação é apresentado o estudo dos transistores de porta flutuante (Floating Gate Transistor - FG Transistor), sua modelagem, e a análise do efeito da dose de ionização total (Total Ionizing Dose- TID) sobre os transistores FG. Para isto foi procurado e implementado um modelo de simulação elétrica do transistor FG em condições de leitura (análise DC), baseado no cálculo quantitativo da tensão na porta flutuante em função das tensões nos terminais do transistor, no valor de carga armazenado na porta flutuante e nos coeficientes de acoplamento capacitivo que apresentam este tipo de dispositivos. Para a análise do efeito TID, a tensão limiar do transistor MOS foi variada usando o método de simulação Monte Carlo, tendo em conta as variações da tensão limiar que apresentam os transistores FG submetidos na radiação ionizante. O estudo obteve como resultado a confirmação da perda de carga do FG à medida que é incrementada a dose de radiação, o que implica uma alteração na característica de retenção de carga que caracteriza as células de memórias não voláteis (Non Volatile Memory - NVM). / In this dissertation work, a study of the the floating gate Transistor (FG transistor) performed. The focus in the electrical modeling, and the analysis of the impact of the Total Ionizing Dose (TID) on the electrical performance of the device. Aiming electrical level simulation, different electric simulation models for the FG transistor in read conditions (DC analysis) were evaluated and the model best suited for implementation into the simulation tool was selected. The selected model is based on Floating Gate voltage calculation as a function of polarization voltage of the FG transistor terminals, the stored charge value in the Floating Gate and the capacitive coupling coefficient presented by this device. For the TID analysis the threshold voltage of the MOS transistor was shifted by means of a Monte Carlo simulation method, considering the threshold voltage variations when the FG transistor is subjected to the ionizing radiation.The analysis lead to the confirmation that the loss charge stored in the FG increases with the radiation dose, affecting the retention characteristics of the memory cells.

Orientador: Carlos Alberto dos Reis Filho / Tese (doutorado) - Universidade Estadual de Campinas, Faculdade de Engenharia Eletrica e de Computação / Made available in DSpace on 2018-08-05T12:05:57Z (GMT). No. of bitstreams: 1 Cajueiro_JoaoPauloCerquinho_D.pdf: 1564955 bytes, checksum: 6ff645ea51f6ee2dcb9e7ab8db6363aa (MD5) Previous issue date: 2005 / Resumo: Uma nova técnica de compensação de temperatura para implementar tensões de referência em circuitos CMOS é descrita, desde o seu fundamento teórico até a comprovação experimental feita com amostras de circuitos integrados protótipos que a implementam. A ténica proposta se baseia no fato de que a tensão entre gate1, e fonte, VGS, de um transistor MOS pode tanto aumentar como diminuir com o aumento da temperatura, dependendo da corrente com que opera. Com base nisto, é possível empilhar n transistores, que estejam polarizados com uma corrente adequada de tal maneira que a queda de tensão sobre esta pilha de transistores, que tem amplitude nVGS, tenha, ao mesmo tempo, a mesma taxa de variação térmica que a tensão VGS produzida por um único transistor. Em tais condições, a diferença entre estas duas tensões é constante, tornando-se uma referencia de tensão. Uma implementação alternativa à pilha de transistores para produzir a tensão nVGS consiste num único transistor de gate ?utuante no qual a tensão VGS equivalente tem amplitude ajustável em campo. Diversos circuitos que se baseiam nesta técnica foram projetados e alguns deles fabricados em tecnologia CMOS 0,35 µm.O desempenho do melhor circuito fabricado atingiu coe?ciente térmico de 100 ppm/°C na faixa térmica de -40 a 120 °C. Outras configurações foram simuladas mostrando que é possível atingir coeficientes térmicos menores que 10 ppm/°C. O estado da arte é representado por referências de tensão que têm coeficientes térmicos de 1 ppm/°C na mesma faixa térmica em que se caracterizam os circuitos desenvolvidos. Tais referências de tensão se baseiam principalmente nos circuitos chamados de bandgap. Há também, um produto recente da empresa Intersil que utiliza um transistor que opera como memória análoga fornecendo uma tensão referência memorizada com altíssima estabilidade térmica. O princípio em que este produto se baseia, entretanto, é diferente do que está sendo proposto neste trabalho apesar do uso comum de um transistor de gate ?utuante. A contribuição deste trabalho não está no desempenho que as fontes de referência que se baseiam no princípio atingiram. Sua contribuição reside na forma como pode ser implementada, utilizando somente transistores MOS e no fato de que tem amplitude ajustável em campo. 1A palavra gate está sendo usada em toda extensão do texto, em lugar da palavra ¿porta¿, para identi?car o terminal de alta resistência de um transistor MOS / Abstract: A new technique of temperature compensation to implement a voltage reference in CMOS circuits is described, from theoretical basis to experimental evidence made with samples of integrated circuits prototypes that implement it. The proposed technique is based on the fact that the voltage between gate and source, VGS, of a MOS transistor can either increase as diminish with the increase of temperature, depending on the current with that it operates. Based in this, it is possible to pile up n transistors, that are polarized with an adequate current in such way that the voltage on this stack of transistors, that has amplitude nVGS, has, at the same time, the same thermal variation than the VGS voltage produced in only one transistor. In such conditions, the difference between these two voltages is constant, becoming a voltage reference. An alternative implementation to the stack of transistors to produce the nVGS volage consists of a ?oating gate transistor in which equivalent VGS has adjustable amplitude in ?eld. Diverse circuits that are based on this technique had been projected and some of them manufactured in technology CMOS 0,35 µm. The performance of the best manufactured circuit reached 100 ppm/°C of thermal coefficient in the thermal band of -40 to 120 °C. Other con?gurations had been simulated showing that it is possible to reach thermal coe?cients lesser that 10 ppm/°C. The state of the art is represented by voltage references that have thermal coefficients of 1 ppm/°C in the same thermal band where the developed circuits had been characterized. Such voltage references are mainly based on the circuits called bandgap. There is, also, a recent product of the Intersil company who uses a transistor that operates as analogical memory supplying a voltage reference memorized with highest thermal stability. The base principle of this product is, however, different of that being considered in this work despite the use of a ?oating gate transistor. The contribution of this work is not in the performance that the reference sources that are based on the principle had reached. Its contribution inhabits in the form as it can be implemented, only using MOS transistors and in the fact that it has adjustable amplitude in ?eld / Doutorado / Eletrônica, Microeletrônica e Optoeletrônica / Doutor em Engenharia Elétrica

.Aujourd’hui, la course à la miniaturisation a engendré de nouveaux défis dans l’industrie microélectronique. En plus de la forte concurrence que subissent les fabricants de composants, de nouvelles contraintes liées à la fiabilité des dispositifs se sont imposées. En effet, le passage d’une technologie « tout silicium » relativement simple à une technologie high-k/grille métal plus complexe, a entrainé une forte réduction des marges de fiabilité des oxydes de grille. A ce titre, Il est devenu nécessaire d’investiguer de nouvelles approches pouvant offrir davantage de gain en durée de vie pour les transistors MOS. C’est dans ce contexte que s’inscrit ce travail de thèse. Dans un premier temps, une présentation des différentes méthodes de caractérisations adaptées à l’étude du vieillissement des dispositifs high-k à grille métallique est faite. Dans ce cadre, des techniques de mesures rapides (type FAST BTI) sont mises en place et adaptée à l’étude du claquage d’oxyde. Ensuite, afin de démontrer que les durées de vie estimées aujourd’hui sont pessimistes, une étude de fiabilité portant sur la compréhension et la modélisation du mécanisme de TDDB (Time Dependent Dielectric Breakdown) sur les technologies avancées à base d’oxyde IL/high-k est présentée. Enfin, le manuscrit se focalise sur un certain nombre d’axes de travail qui pourraient permettre de dégager une marge significative sur la durée de vie TDDB. / .Today, in the race for miniaturization, the microelectronics industry faces new challenges. In addition to the strong competition of other component manufacturers, new constraints related to the reliability of devices have emerged. Indeed, the transition from the "all silicon" technology relatively simple to the high-k/metal gate technology has generated a reduction in reliability margins of gate oxides. As such, it becomes necessary to investigate new approaches that can provide more gain in lifetime for the MOS transistors. In this respect, this work gives firstly an overview of different methods of characterization used for the study of aging high-k metal gate devices. In this context, the need to develop and implement new fast techniques essential to the study of the oxide breakdown is exposed. Afterwards, in order to show that the estimated lifetimes today are pessimistic, we presented a reliability study based on understanding and modeling the mechanism of TDDB (Time Dependent Dielectric Breakdown) on advanced high-k/metal gate stacks based technology. Finally, the manuscript focuses on a number of investigation areas that could provide a significant margin for the TDDB lifetime.

Nesta dissertação é apresentado o estudo dos transistores de porta flutuante (Floating Gate Transistor - FG Transistor), sua modelagem, e a análise do efeito da dose de ionização total (Total Ionizing Dose- TID) sobre os transistores FG. Para isto foi procurado e implementado um modelo de simulação elétrica do transistor FG em condições de leitura (análise DC), baseado no cálculo quantitativo da tensão na porta flutuante em função das tensões nos terminais do transistor, no valor de carga armazenado na porta flutuante e nos coeficientes de acoplamento capacitivo que apresentam este tipo de dispositivos. Para a análise do efeito TID, a tensão limiar do transistor MOS foi variada usando o método de simulação Monte Carlo, tendo em conta as variações da tensão limiar que apresentam os transistores FG submetidos na radiação ionizante. O estudo obteve como resultado a confirmação da perda de carga do FG à medida que é incrementada a dose de radiação, o que implica uma alteração na característica de retenção de carga que caracteriza as células de memórias não voláteis (Non Volatile Memory - NVM). / In this dissertation work, a study of the the floating gate Transistor (FG transistor) performed. The focus in the electrical modeling, and the analysis of the impact of the Total Ionizing Dose (TID) on the electrical performance of the device. Aiming electrical level simulation, different electric simulation models for the FG transistor in read conditions (DC analysis) were evaluated and the model best suited for implementation into the simulation tool was selected. The selected model is based on Floating Gate voltage calculation as a function of polarization voltage of the FG transistor terminals, the stored charge value in the Floating Gate and the capacitive coupling coefficient presented by this device. For the TID analysis the threshold voltage of the MOS transistor was shifted by means of a Monte Carlo simulation method, considering the threshold voltage variations when the FG transistor is subjected to the ionizing radiation.The analysis lead to the confirmation that the loss charge stored in the FG increases with the radiation dose, affecting the retention characteristics of the memory cells.

Signal-integrity degradation from such factors as supply and substrate noise and cross talk between interconnects restricts the performance advances in Very Large Scale Integration (VLSI). To avoid this and to keep the signal-integrity, accurate measurements of the on-chip signal must be performed to get an insight in how the physical phenomenon affects the signals. High-speed digital signals can be taken off chip, through buffers that add delay. Propagating a signal through buffers restores the signal, which can be good if only information is wanted. But if the waveform is of importance, or if an analog signal should be measured the restoration is unwanted. Analog buffers can be used but they are limited to some hundred MHz. Even if the high-speed signal is taken off chip, the bandwidth of on-chip signals is getting very high, making the use of an external oscilloscope impossible for reliable measurement. Therefore other alternatives must be used. In this work, an on-chip measuring circuit is designed, which makes use of the principle of a sampling oscilloscope. Only one sample is taken each period, resulting in an output frequency much lower than the input frequency. A slower signal is easier to take off-chip and it can easily be processed with an ordinary oscilloscope.

<p>Signal-integrity degradation from such factors as supply and substrate noise and cross talk between interconnects restricts the performance advances in Very Large Scale Integration (VLSI). To avoid this and to keep the signal-integrity, accurate measurements of the on-chip signal must be performed to get an insight in how the physical phenomenon affects the signals. </p><p>High-speed digital signals can be taken off chip, through buffers that add delay. Propagating a signal through buffers restores the signal, which can be good if only information is wanted. But if the waveform is of importance, or if an analog signal should be measured the restoration is unwanted. Analog buffers can be used but they are limited to some hundred MHz. Even if the high-speed signal is taken off chip, the bandwidth of on-chip signals is getting very high, making the use of an external oscilloscope impossible for reliable measurement. Therefore other alternatives must be used. </p><p>In this work, an on-chip measuring circuit is designed, which makes use of the principle of a sampling oscilloscope. Only one sample is taken each period, resulting in an output frequency much lower than the input frequency. A slower signal is easier to take off-chip and it can easily be processed with an ordinary oscilloscope.</p>

La réduction des dimensions des transistors à effet de champ MOS a depuis quelques années ralenti à cause de l'émergence de facteurs parasites tels que la résistance d'accès. En effet, la miniaturisation du canal s'est accompagnée par une diminution de sa résistance tandis que celle des zones d'accès à la frontière avec le canal est restée constante ou a augmenté. L'objectif de cette thèse a été de mettre en place une méthodologie de caractérisation électrique prenant en compte cette composante parasite longtemps considérée négligeable dans le milieu industriel.Dans un premier chapitre, le fonctionnement de la technologie CMOS et la spécificité de son adaptation FD-SOI sont d'abord présentées. La deuxième moitié du chapitre est quant à elle consacrée à l'état de l'art de la caractérisation électrique et de leur position vis-à-vis de la résistance d'accès.Le second chapitre présente une nouvelle méthode d'extraction des composantes parasites résistives et capacitives à l'aide de transistors de longueurs proches. Les résultats obtenus sont ensuite comparés aux modèles existants. De ces derniers, un nouveau modèle plus physiquement pertinent est proposé en fin de chapitre.Le troisième chapitre expose une nouvelle méthode de caractérisation électrique basée sur la fonction Y qui permet une analyse du comportement d'un transistor sur l'ensemble de son régime de fonctionnement. Cette nouvelle méthode est ensuite combinée à celle développée dans le chapitre 2 pour assembler un protocole expérimentale permettant de corriger et d'analyser l'impact des résistances d'accès sur les courbes de courant et les paramètres électriques.Finalement, le dernier chapitre applique la méthodologie vue dans la chapitre précédent à l'étude du désappariement stochastique des transistors. Les résultats obtenus sont ensuite comparés aux méthodes en vigueur dans les domaines industriel et académique qui présentent chacune leurs avantages et leurs inconvénients. La nouvelle méthode ainsi proposée tente de garder le meilleur de chacune de ces dernières. / The reduction of the dimensions of field effect MOS transistors has slowed down during the last years due to the increasing importance of parasitic factors such as access resistance. As a matter of fact, channel miniaturisation was accompanied by a reduction of its intrinsic resistance while that of the access region at the frontier with the channnel stayed constant or increased. The goal of this thesis was to set a new electrical characterization method to take into account this parasitic component long considered negligible in by industrials.In the first chapter, CMOS technologies working and its FD-SOI adaptation specificities are presented. The second half of the chapter deals with the state of the art of electrical characterization and their hypothesis about access resistance.The second chapter present a new resistive and capacitive parasitic components extraction method using transistors of close channel length. The results are then compared to existing models from which, a new one more physically accurate is proposed.The third chapter expose a new electrical characterization method based on Y function allowing the analyze of transistor behavior on the whole working regime. This new method is then combined with the one developped in the previous chapter to build a new experimental protocol to correct and analyze the impact of access resistances on current curves and parameters.Finally, the last chapter apply this new methodology to the case of stochastic mismatch between transistors. The results are then compared to the methods used by industrials and academics, each of them having their own pros and cons. The new method proposed tries to keep the best of both previous one.