Orientador: Carmen Silvia Bertuzzo / Tese (doutorado) - Universidade Estadual de Campinas, Faculdade de Ciencias Medicas / Made available in DSpace on 2018-08-10T05:11:43Z (GMT). No. of bitstreams: 1 Faria_ElisangelaJacintode_D.pdf: 2724594 bytes, checksum: 0bdfcc4937fef94a58da6f31edd931de (MD5) Previous issue date: 2007 / Resumo: A Fibrose Cística é uma alteração genética que cursa principalmente com manifestações pulmonares e pancreáticas. A correlação genótipo-fenótipo da fibrose cística é motivo de árduos estudos. Somente a correlação com a insuficiência pancreática foi encontrada. Percebeu-se, também, que o curso e a gravidade da manifestação pulmonar não estão correlacionados com o genótipo CFTR. A doença pulmonar pode ser influenciada por fatores ambientais e por fatores genéticos. Genes modificadores podem influenciar na gravidade do fenótipo dos fibrocísticos através de vários mecanismos. O objetivo desse projeto foi analisar alguns genes modificadores, MBL2, TGFB1 e CD14, e correlacionar com a gravidade do quadro pulmonar dos fibrocísticos. Verificar a presença dos alelos 'delta'F508 e a gravidade do quadro pulmonar nos paciente fibrocísticos. A análise de polimorfismos no gene MBL2 e no gene TGF- 'beta'1 no códon 10 na posição + 869, foi realizada através da técnica da reação em cadeia da polimerase alelo específica. A genotipagem do polimorfismo C-159T, no gene CD14 foi realizada através da reação em cadeia da polimerase e digestão enzimática. Em nossa casuística, os polimorfismos do gene MBL2 não foram associados com a gravidade do quadro pulmonar em pacientes fibrocísticos. Com relação ao polimorfismo T869C no gene TGFB1, encontramos apenas associação do heterozigoto TC com quadro pulmonar leve (P=0,04). Para o polimorfismo C-159T no gene CD14, obtivemos um predomínio de pacientes com o genótipo TT (P=0,0009), mas não houve discriminação com relação à gravidade do quadro pulmonar. Com isso concluímos que houve uma associação entre o genótipo TC do polimorfismo T869C (TGF-'beta'1) e o quadro pulmonar leve nos fibrocísticos. Com relação ao gene CD14, o genótipo TT parece ser um fator de risco para o quadro pulmonar, mas não um fator modulador da gravidade. Em nossa casuística, não existiu associação entre pacientes homozigotos para a mutação 'delta'F508 e a gravidade do quadro pulmonar / Abstract: Cystic fibrosis is a genetic alteration characterized mainly by pancreatic and pulmonary manifestations. The genotype-phenotype correlation in cystic fibrosis has been the subject of arduous studies. A correlation between cystic fibrosis and pancreatic insufficiency, as well as to the fact that the occurrence and severity of pulmonary manifestations are not correlated with CFTR genotype, has been observed. Pulmonary illness can be influenced by environmental and genetic factors. Modifier genes can influence the phenotype severity of patients with cystic fibrosis through some mechanisms. The objective of this study was to analyze some modifier genes, such as MBL2, TGFB1 and CD14, and to correlate them with the gravity of the pulmonary picture of patients with cystic fibrosis and to also verify the presence of the alleles 'delta'F508 and the gravity of the pulmonary picture in these patients. The analysis of MBL2 and TGF-'beta'1 gene polymorphisms at codon 10, in the position + 869, was carried out using the technique of allele-specific polymerase chain reaction. The genotyping of the CD14/-159 polymorphism was performed by polymerase chain reaction and enzymatic digestion. In our casuistic, the polymorphism of the MBL2 gene was not associated with the gravity of the pulmonary picture in patients with cystic fibrosis. Regarding the T869C polymorphism in the TGFB1 gene, we found only an association of heterozygote TC with a mild pulmonary picture (P=0,04). In the C-159T polymorphism of the CD14 gene, we observed an accumulation of patients with genotype TT (P=0,0009), but did not have a discrimination regarding the gravity of the pulmonary picture. Therefore we concluded that there was an association between the genotype TC of the T869C polymorphism (TGF-'beta'1) and the mild pulmonary picture in the patients with cystic fibrosis. Regarding the CD14 gene, the TT genotype seems to be a risk factor for the pulmonary picture, but not a gravity modulating factor. In our casuistic, we found no association between 'delta'F508 homozygote patients for the mutation and the gravity of the pulmonary picture / Doutorado / Ciencias Biomedicas / Mestre em Ciências Médicas

A Síndrome de Marfan (SMF) (OMIM# 154700) é a mais comum das doenças genéticas do tecido conjuntivo Herdada de forma autossômica dominante, ela apresenta incidência de 1 em cada 5.000 indivíduos. Apesar de apresentar grande variabilidade clínica inter e intrafamiliar, o fenótipo da SMF possui penetrância completa, e suas manifestações clínicas afetam primariamente os sistemas esquelético, ocular e cardiovascular. Afim de estudar os mecanismos patogênicos da SMF foi desenvolvido um modelo murino, mgΔneoLoxP, que reproduz as manifestações ósseas, cardiovasculares e pulmonares da síndrome. O modelo foi estabelecido nas linhagens isogênicas 129/Sv e C57BL/6, que apresentam diferenças tanto quanto a idade de acometimento quanto a gravidade das alterações, é possível que as diferenças alélicas existentes entre essas linhagens alterem a manifestação fenotípica, ou seja, que existam genes modificadores para a SMF. Assim, objetivo deste projeto é utilizar este modelo experimental para identificar genes modificadores do fenótipo da SMF e tentar entender melhor a arquitetura genética da síndrome. Ao todo foram gerados 82 animais 129xB6 F2 heterozigotos para o alelo mgΔneoLoxP, a analise de ligação utilizando microssatélites e SNPs nos animais com fenótipos mais extremos mostraram ligação sugestiva do fenótipo ósseo com as regiões compreendidas entre as posições 56 cM e 68 cM do cromossomo 3; e 2 cM e 20 cM do cromossomo X; ligação significativa entre as posições 41cM e 49 cM do cromossomo 6; além de mostrar ligação sugestiva do fenótipo cardiovascular do 66 cM ao 70 cM do cromossomo 4; e do 44 cM ao 52 cM do cromossomo 13. Além da variabilidade entre linhagens, os animais 129 apresentam uma grande variabilidade fenotípica interna, o que por se tratar de animais isogênicos causada por fatores aleatórios ou devido a modificações epigenéticas que alterem o nível de expressão de alguns genes e assim o fenótipo. A comparação entre animais 129 leves e graves levou a identificação de 25 genes diferencialmente expressos dos quais 11 apresentavam funções relevantes para a SMF, entretanto foram aferidos os níveis de expressão de 2 destes que não validaram os resultados obtidos devido a uma grande variação observada entre os animais de todos as classes fenotípicas. Também foram identificadas 46 vias que se apresentavam mais frequentes nos conjuntos de genes obtidos entre as duas classes fenotípica de animais heterozigotos contra os animais selvagens. Tanto as vias, quanto os genes identificados através de ligação quanto diferença de expressão mostram uma convergência para as funções dos genes de interesse, sendo que entre eles existem genes já associados com a SMF, controle de ativação de TGF-B e da biogênese das microfibras da matriz extracelular, quanto genes que ainda não foram associados mas são possíveis modificadores do fenótipo, tais como genes envolvidos nos processos de enovelamento e degradação protéico e nos processos de endocitose e exocitose de vesículas, que podem alterar a quantidade de fibrilina-1 truncada disponível e assim o fenótipo / The Marfan syndrome (MFS) (OMIM # 154700) is the most common genetic disorder of the connective tissue and is inherited in a autosomal dominant fashion, it has an incidence of 1 in 5,000 individuals. Despite a great clinical variability being one of the \"trademarks\" of the syndrome, the phenotype of the MFS has complete penetrance and its clinical manifestations primarily affect the skeletal, ocular and cardiovascular systems. In order to study the pathogenic mechanisms of MFS was developed a mouse model, named mgΔneoLoxP, which reproduces the skeletal, cardiovascular and pulmonary manifestations of the syndrome. The model was established in inbred mouse strains 129/Sv and C57BL / 6, which phenotypes differ as to age of onset and severity of manifestation. It is possible that allelic differences between these inbred strains alter the phenotyic manifestation of disease, leading to the conclusion that may exist modifier genes involved in the for MFS. This study inteds to use this experimental model to identify phenotype modifier genes of MFS so a better understand the genetic architecture of the syndrome. Altogether, 82 129xB6 F2 heterozygous animals were generated so that a linkage analysis using microsatellite and SNP could be conducted. The linkage analysis using a selective genotyping procedure showed a suggestive linkage of the skeletal phenotype with regions included between positions 56 cM and 68 cM on chromosome 3, and 2 cM and 20 cM on chromosome X; and a significant linkage between positions 41cM and 49 cM on chromosome 6; also showing suggestive linkage of the cardiovascular phenotype from 66 cM to 70 cM on chromosome 4, and 44 cM to 52 cM on chromosome 13. Besides the variability between strains, 129 animals have a wide inner strain phenotypic variability, which in the case of isogenic animals should be caused by random factors or due to epigenetic modifications that may alter the expression level some genes and thus the phenotype. The comparison between animals of the 129 strain with mild and severe alterations led to the identification of 25 differentially expressed genes of which 11 showed relevant functions to the MFS, however it was only possible to measure the expression levels of two genes using real-time PCR, although those did not validate the results obtained from the expression microarray due to a large expression variation in all phenotypic classes. It was also identified 46 pathways that were more frequent in the gene lists obtained from the comparison between the two phenotypic classes of heterozygous animals against 129 wildtype animals. There is a similarity in the function of genes or pathways of interest found in pathways analysis and genes identified, either by differential expression or linkage analisys, and among them there genes already associated with the MFS, such as in the control activity of TGF-B and biogenesis of microfibers in the extracellular matrix, as also genes that were not associated with MFS but are possible phenotype modifier genes, such as genes involved in protein folding and degradation processes and of endocytosis and exocytosis processes of vesicle, which can change the amount of truncated fibrillin-1 available and thus the phenotype

A otimização da formulação do óleo lubrificante empregado em motores de combustão interna é uma importante maneira de se reduzir o atrito e assim aumentar a eficiência energética. É também uma forma de assegurar proteção ao sistema, mantendo a taxa de desgaste em um nível adequado. O óleo de motor é uma mistura de óleos básicos selecionados com aditivos, entre os quais podem ser encontrados os modificadores de atrito, que são compostos com capacidade de aderir às superfícies metálicas, proporcionando melhoria da lubrificação em condições mista e limítrofe. O dialquilditiocarbamato de molibdênio (MoDTC) está entre os mais importantes redutores de atrito empregados em óleos lubrificantes. Ésteres sintéticos podem ser usados como óleos básicos em algumas formulações. Visto que ésteres são mais polares que hidrocarbonetos, essas moléculas podem atuar modificando propriedades do óleo na região próxima à superfície metálica. Podem também interferir com filmes adsorvidos, limitando sua efetividade. O objetivo do trabalho é a comparação dos efeitos do MoDTC em diferentes misturas contendo hidrocarboneto e éster. Para isso, formulações lubrificantes contendo uma polialfaolefina, um diéster e um aditivo à base de MoDTC foram preparadas, caracterizadas e ensaiadas em tribômetro oscilatório SRV usando configuração esfera-­disco. Foram empregadas esferas de aço AISI 52100 e discos de aço AISI H13. Foi estudada a influência da variação da temperatura e da força normal aplicada. Empregando-­se mistura de hidrocarboneto e éster como lubrificante, o aumento da temperatura causou leve aumento do coeficiente de atrito. Em ausência de MoDTC, a presença de éster aumentou a capacidade de suportação de carga das formulações. Os testes com óleos contendo MoDTC foram marcados pela ocorrência de dois fenômenos: ativação e depleção do aditivo. Estes fenômenos se mostraram dependentes da carga normal e da composição do óleo. O efeito de redução do atrito pelo MoDTC tende a ser menos duradouro com óleos mais ricos em éster e em condições de carregamento mais severo. O comportamento tribológico do éster em mistura com polialfaolefina, medido através do coeficiente de atrito, seguiu a isoterma de adsorção de Frumkin, com alguma atração entre as moléculas do éster, e energia livre da ordem de -­4 kJ/mol, típica de fisissorção. Óleos envelhecidos artificialmente foram testados e não apresentaram diferenças significativas com relação aos mesmos óleos novos. A adição de etanol aos óleos envelhecidos causou uma leve diminuição no coeficiente de atrito a 40 °C; tal efeito não foi perceptível em temperaturas mais altas, provavelmente devido à perda por evaporação do álcool. / The optimization of the lubricant oil formulation used in internal combustion engines is an important way of reducing friction, thus increasing energetic efficiency. It is also a way of protecting the system, maintaining wear rate in an adequate level. The engine oil is a blend of selected base oils with additives, amongst which are the friction modifiers substances able to adhere to the metal surfaces, thus providing better lubrication at the mixed and boundary regimes. Molybdenum dialkyldithiocarbamate (MoDTC) is amongst the most important friction reducers used in lubricant oils. Synthetic esters may be employed as base oils in some formulations as well. Given that esters are more polar than hydrocarbons, these molecules can actuate by modifying oil properties in the near-­surface region. They can also interfere with adsorbed films, preventing their effectiveness. The objective of this work is the comparison of the effects of MoDTC in different mixtures containing hydrocarbon and ester. With this aim, lubricating formulations containing a polyalphaolefin, a diester and a MoDTC-­based additive were prepared, characterized and tested in a reciprocating SRV tribometer using ball-­on-­disc configuration. AISI 52100 steel balls and AISI H13 steel discs were employed. The influences of the temperature and of the normal load were both studied. Employing a mixture of hydrocarbon and ester as lubricant, a higher temperature caused a slightly higher coefficient of friction in the lubricant free of additive. In the absence of MoDTC, the ester increased the load-­carrying capacity of the lubricant formulations. Tests with MoDTC-­containing oils were characterized by two phenomena: activation and depletion of the additive. These phenomena showed to be dependent on the normal load and on the oil composition. The MoDTC friction reducing effect tends to be less sustainable with higher ester concentrations and at higher loads. The tribological behavior of the ester in the presence of polyalphaolefin, as measured by the coefficient of friction, followed the Frumkin adsorption isotherm, with some attraction between ester molecules, and free energy in the order of -­4 kJ/mol, typical of physisorption. Artificially aged oils were tested and did not show differences when compared with the results of the fresh oils. Adding ethanol to the aged oils caused a slightly reduction in the coefficient of friction at 40 °C, but this effect was not observed at higher temperatures, probably due to evaporation loss of the alcohol.

Neste trabalho foi estudado o processo de tenacificação do poli(ácido lático), PLA, através da produção de blenda com terpolímero randômico (etileno/éster acrílico/glicidil metacrilato), EMA-GMA, como modificador de impacto. Três composições foram estudadas, 90/10, 80/20 e 70/30% em massa, as misturas foram homogeneizadas em extrusora dupla-rosca (melt blending) e corpos de prova foram moldados por injeção. A avaliação do comportamento mecânico e da eficiência da tenacificação foi realizada através de ensaios mecânicos de tração (ATSM D638), resistência ao impacto Izod com entalhe (ASTM D256), flexão (ASTM D790) e dureza Shore D (ASTM 2240). A presença de umidade e a temperatura de degradação foram avaliadas por análise termogravimétrica (TGA), as temperaturas de transição vítrea (Tg), fusão cristalina (Tm) e grau de cristalinidade foram avaliadas por calorimetria exploratória diferencial (DSC) e a morfologia foi analisada por meio de micrografias obtidas por microscopia eletrônica de varredura (MEV). Os resultados dos ensaios mecânicos idicaram que todas as blendas possuem valores de tenacidade superiores ao do PLA. Entretanto, as blendas apresentaram como efeito colateral queda em módulo (obtidos por ensaios de resistência a tração e flexão), resistência a tração no ponto de escoamento e dureza, em função do aumento da concentração de EMA-GMA no PLA. Na composição com 20% de EMA-GMA a distribuição da dispersa ao longo da fase matriz está mais homogênea, e a composição com 30% de EMA-GMA resultou em um material super tenaz (com valores de resistência ao impacto Izod com entalhe acima de 500J/m). / In this work poly(lactic acid), PLA, was toughened by addition a thermoplastic elastomer, the random terpolymer (ethylene / acrylic ester / glycidyl methacrylate), EMA-GMA. Three= compositions were prepared: with concentrations of 10, 20 and 30 wt% of EMA-GMA into PLA. The blends were prepared in a twin-screw extruder and molded by injection molding. The samples were systematically characterized by tensile strength, notched Izod impact strength, flexural properties and Shore hardness (using Shore D scale). The presence of moisture and the degradation temperature of PLA were evaluated by thermogravimetric analysis (TGA), the glass transition temperature (Tg), crystalline melting (Tm) and crystallinity index of PLA and of the blend were evaluated by differential scanning calorimetry (DSC) and the blend morphology was analyzed by scanning electron microscopy (SEM). The results showed that all blends presented a dramatic increase in their toughness, when compared to PLA. However, the moduli (obtained by tensile and flexural tests), tensile strength at yield, and hardness decreased when the dispersed phase content increased. In the 80/20 PLA/EMA-GMA blend, the dispersed phase is more homogeneously dispersed within the matrix, and the composition with 30 wt% of EMA-GMA resulted in a super tough material (notched Izod impact strength exceeding 500 J/m).

Orientador: Solange Cadore / Dissertação (mestrado) - Universidade Estadual de Campinas, Instituto de Química / Made available in DSpace on 2018-08-20T04:41:54Z (GMT). No. of bitstreams: 1 Silva_EmanuelidoNascimentoda_M.pdf: 1310162 bytes, checksum: cf2ef6caeefb5aae3a404cf9c42f847b (MD5) Previous issue date: 2012 / Resumo: Para o desenvolvimento de um método para a determinação de Se em corantes alimentícios por GF AAS, foi feito um estudo com diversos modificadores químicos, avaliando as temperaturas ótimas de pirólise e de atomização, bem como diferentes procedimentos para o preparo da amostra. O método escolhido para a determinação do analito foi o ajuste de matriz (matrix-matching), utilizando o corante E-132. A DA (dissolução ácida) mostrou-se um tratamento adequado para a amostra, o modificador químico selecionado foi o Pd 5 mg/Mg(NO3)2 3mg e as temperaturas ótimas foram 1300 ºC para a pirólise e 1800 ºC para a atomização. O método apresentou exatidão e precisão adequadas, uma vez que as recuperações ficaram entre 90 e 100% e os desvios relativos foram menores que 10% para todos os corantes. Os limites de detecção e de quantificação foram 0,62 e 2,07 mg kg, respectivamente. Para Cr e Cu tambem foram estudados diferentes procedimentos para o preparo da amostra e temperaturas de pirólise e de atomização. Para Cr as temperaturas ótimas foram de 1500 ºC para a pirólise e 2500 ºC para a atomização, utilizando a DA como tratamento da amostra e Mg(NO3)2 15 mg como modificador químico. O método utilizando uma curva de calibração externa para a determinação de Cr em corantes apresentou recuperações entre 90 e 110% com desvios relativos menores que 10%, mostrando exatidão e precisão para o método proposto. Os limites de detecção e de quantificação para o método foram 0,076 e 0,248 mg kg e 0,169 e 0,556 mg kg, para as curvas de menor e maior concentração, respectivamente. Já para Cu as temperaturas ótimas foram de 1200 ºC para a pirólise e de 2000 ºC para a atomização, utilizando a DA como tratamento da amostra e Pd 5 mg/Mg(NO3)2 3 como modificador químico. Entretanto, para este analito o método com a curva de calibração externa foi eficiente somente para os corantes E-102, E-110 e E-124, apresentando exatidão e precisão, com recuperações de 90-110% e desvios menores que 10%. Os limites de detecção e de quantificação para o método foram 0,030 e 0,102 mg kg e 0,086 e 0,290 mg kg, para as curvas de menor e maior concentraçãoo, respectivamente. Já para os corantes E-132 e E-123, curvas de adição de padrão devem ser utilizadas para a determinação dos analitos nos corantes alimentícios. Para o corante E-132 o LOD foi de 0,109 mg kg e o LOQ de 0,364 mg kg, e para o corante E-123 o LOD foi de 0,063 mg kg e o LOQ de 0,211 mg kg / Abstract: A study with various chemical modifiers for the determination of Se in food dyes by GF AAS was developed, assessing the optimum pyrolysis and atomization temperatures, as well as different procedures for sample preparation. The method selected for the determination of the analyte was the matrix-matching, using the E-132 dye. The AD (acid dissolution) showed to be an appropriate treatment for the sample, while 5mg Pd/3 mg/Mg(NO3)2 3mg was the chemical modifier selected and optimum temperatures were 1300 °C for pyrolysis and 1800 °C for atomization. The method presented adequate accuracy and precision, considering that recoveries were within the 90 and 100% range and the relative standard deviations were < 10% for all dyes studied. The limits of detection and quantification were 0.62 and 2.07 mg kg, respectively. For Cr and Cu it was also studied different procedures for sample preparation and temperatures of pyrolysis and atomization. For Cr the optimum temperatures were 1500 °C for pyrolysis and 2500 °C for the atomization using AD as a sample treatment and 15 mg/Mg(NO3)2 as chemical modifier. The method using an external calibration curve for the determination of Cr in dyes presented recoveries within the 90 and 110% range with relative standard deviations < 10%, showing accuracy and precision for the proposed method. Limits of detection and quantification for the method of 0.076 and 0.248 mg kg and 0.169 and 0.556 mg kg were obtained for the curves of lower and higher concentrations, respectively. The optimum temperatures for Cu were 1200 °C for pyrolysis and 2000 °C for the atomization using AD as a sample treatment and using 5mg Pd/3 mg/Mg(NO3)2 as chemical modifier. However, the external calibration curve was efficient only for E-102, E-110 and E-124 dyes, which allowed recoveries between 90 and 110% and relative standard deviations < 10%. The limits of detection and quantification for the method were 0.030 and 0.102 mg kg and 0.086 and 0.290 mg kg for the lower and higher concentrations curves, respectively. For E-132 and E-123 dyes, standard addition calibration curves should be used for the xii determination of Cu in food dyes. For E-132 the LOD was 0.109 mg kg and LOQ was 0.364 mg kg, and for E-123 the LOD was 0.063 mg kg and LOQ was 0.211 mg kg / Mestrado / Quimica Analitica / Mestra em Química

Fedmis Pty (Ltd) situated in Palaborwa, South Africa produces phosphoric acid using the wet process production process. For this study, two main areas of concern in the wet process phosphoric acid production were investigated. The first area is the formation of sludge in the system due to impurities that reduces the grade of the acid produced, thereby lowering the selling price. The second area is the crystallisation of the gypsum that influences filtration and thereby affects plant productivity. These two aspects were investigated separately as they occur in different steps of the production process at different acid concentrations. A major component of the acid sludge is known as x-compound, ((Fe,Al)3KH)14 (PO4)8.4H2O). The purpose of the investigation of x-compound is to determine what effects different ionic impurities have on its precipitation and to determine if these effects could be used to decrease the amount of sludge formation. Due to the complexity of the system and the wide variety of impurities only the major impurities were considered in this study. These impurities included potassium (K+), sodium (Na+), magnesium (Mg2+), aluminium (Al3+) and iron (Fe3+). For all the experiments investigating the effect of impurities, analytical reagents were used on laboratory scale. For the silica experiments, commercially available samples were used. For the experiments investigating the impurity effects on the precipitation of x-compound it was found that: <ul> <li> Agitation increases x-compound precipitation and can be used commercially to increase the precipitation rate to a point where sludge can be removed before transportation.</li> <li> Adding x-compound seeding crystals or magnesium ions also increases precipitation.</li> <li> Adding gypsum, sodium, hexafluorosilicates or fluorosilic acid reduces the precipitation, with sodium ions producing the lowest yield. This reduction is however not sufficient to be used commercially.</li> </ul> From the Raman study it became clear why x-compound precipitation is such a slow process. E At low acid concentrations, more H2PO4 - ions are present that form a complex with iron and aluminium. E As the acid concentration increases the concentration of H2PO4- ions decrease as the degree of dissociation of phosphoric acid decreases. The ferric- H2PO4- and aluminium- H2PO4- complexes become less stable and ultimately precipitation of the x-compound is favoured above solvation. E Addition of potassium impurities to the solutions had no visible effect on the Raman spectra and is suspected not to form a complex with the acid. From the silica sources investigated namely Dicalite, Serina Kaolin, Foskor silica and Aerosil 200 it can be concluded that none of the sources will be useful for the removal of potassium through formation of potassium hexafluorosilicates. For the determination of the concentration of impurities present in the production of phosphoric acid, the Fedmis monitoring program was initiated. It included the monitoring of Foskor rock analyses on a daily basis, and the monitoring of the 27%, 39% and 54% P2O5 phosphoric acid and precipitate, from these acid solutions on a weekly basis. From the investigation of the effect of these impurities on the solubility of potassium hexafluorosilicates, it was found that magnesium causes K2SiF6 to be the most soluble and fluoride the least. Unfortunately, the impurities did not help to reduce the potassium concentrations in the acid to below the required amount for sludge formation. For the calcium sulphate dihydrate surfactant experiments, the purpose of the investigation was to determine whether higher crystallisation qualities could be obtained to improve plant productivity. The investigation was limited to using surfactants with sulphate or phosphate functionalities and experiments were done on laboratory scale using analytical reagents. Atphos E3205, Atpol E3202 and Atpol E1231 are polyethoxylated alkyl phenol phosphate esters that had no visible effect on the crystal structure of the precipitated gypsum, but differences in the crystal sizes were observed. Smaller crystal structures with relatively equal masses compared to reference experiments are an indication of a growth inhibitor and a nucleation promoter as seen with Atphos E3205 and Atpol E3202. Increased crystal sizes were obtained using Atpol E1231. The use of Calsoline Oil caused a wider crystal size distribution in the precipitated crystals as thin and broad crystals with approximately the same length are found. The crystal mass obtained is also approximately the same as that of the reference experiment. Thus, it can be concluded that the surfactant affects the growth of the crystals and not the nucleation. Arlatone 1489, calcium gluconate monohydrate, Dowfax Hydrotrope and Tamol NN 8906 had no visible effect on the structure or size of the precipitated gypsum crystals. With the use of Nansa SS30, drastic effects were seen on the crystallisation of the calcium sulphate as small hexagonal rods were found. With an increase in surfactant concentration, there is a clear decrease in the mass of crystals obtained as well as crystal size. An increase in the crystal size distribution and a decrease in crystal size reduced the filtration rate dramatically. Experiments carried out for 24 hours exhibited the same trends where there is a decrease in yield with an increase in surfactant concentration. Higher yields were however obtained proving that mass transfer barriers were overcome. The results from these experiments again indicate that the surfactant affects crystal growth and nucleation. With the use of Dowfax 3B2 there is definite reduction in yield with an increase in surfactant concentration reaching a minimum at approximately 70% yield. Due to the presence of large amounts of smaller crystals and the almost constant yield obtained compared to the reference experiment, it can be concluded that this surfactant is a growth and not a nucleation inhibitor. As with Nansa SS30, experiments where Empicol LZ/D was used show a continuous decrease in the yield obtained with an increase in the surfactant concentration. At higher concentration of Empicol LZ/D, it seems as if this surfactant changed from a growth promoter to a growth inhibitor because although broad longer crystals are present, there are now also much smaller crystals formed. The crystal size distribution also broadens considerably. Overall, very high yields were obtained using Empimin KSN70 and the observed crystal size distributions were very narrow. The only difference was that the crystals appeared to be more porous or fibrous compared to the reference experiment. It is recommended that the experiments showing promise as crystal habit modifiers like Nansa SS30 and Empicol LZ/D be investigated in more detail as well as combinations of surfactants. Both the areas of concern in the process were investigated successfully. For the sludge formation problem, it is now clear what effects the precipitation of x-compound as well as what affect the impurities and operating conditions have. For the crystallisation of gypsum using surfactants, it was proven that surfactants could be used to affect crystal growth, shape and distribution and in this way influence filtration. / Dissertation (MSc(Chemical Engineering))--University of Pretoria, 2005. / Chemical Engineering / unrestricted

La législation européenne sur les émissions des véhicules devient de plus en plus sévère et ceci afin de minimiser l'impact sur l'environnement de la pollution occasionnée par les moteurs à combustion interne. La réduction des pertes par frottement et une plus faible consommation du carburant représentent différents aspects sur lesquels il est possible d’intervenir dans ce sens. Pour diminuer les pertes par frottement, plusieurs approches ont été utilisées, soit au niveau du design des pièces mécaniques, soit au niveau de l’optimisation du lubrifiant pour un contact considéré. Le dithiocarbamate de molybdène (MoDTC) est l’un des additifs modificateur de frottement permettant d’atteindre les plus faibles coefficients de frottement pour un contact acier/acier lubrifié en régime limite. La molécule se décompose dans le contact à des températures et des pressions élevées, en formant des feuillets lamellaires de MoS2 sur les surfaces frottantes. Cependant, il est nécessaire d'optimiser la durée de vie de ces additifs, en empêchant leurs appauvrissements ou dégradations prématurés dans le lubrifiant. Il a été montré, en effet, que les performances du MoDTC sont sensibles au temps de fonctionnement du moteur et sont donc liées à sa dégradation. L'objectif principal de cette thèse était donc de mieux comprendre le comportement tribologique (frottement et usure) d’une huile de base contenant du MoDTC en fonction de la dégradation du lubrifiant pour des contacts acier/acier et DLC/acier. L’approche utilisée pour mieux comprendre le comportement du MoDTC lorsqu'il est soumis à une dégradation thermo-oxydative consiste à combiner des expériences tribologiques, à des caractérisations de surface (XPS, FIB / TEM / EDX, Raman, SEM) et à des caractérisations chimiques des huiles (chromatographie en phase liquide, spectroscopie de masse, FT-IR). Un lien direct et cohérent entre la composition du tribofilm et la voie de décomposition chimique de l'additif MoDTC proposée a été mise en évidence. Les additifs modernes sont conçus pour être utilisés sur des surfaces à base de fer. Il est donc essentiel d'optimiser simultanément les lubrifiants et les revêtements pour améliorer leurs performances. Dans cette thèse, un modèle d'usure du revêtement DLC hydrogéné lubrifié en présence de MoDTC a été proposé. Nous avons établi à l’aide de plusieurs techniques, que l’usure est due principalement à la formation de carbure de molybdène présent dans le tribofilm formé à la surface de l’acier. / European legislation on vehicle emissions continues to become more severe to minimize the impact of Internal Combustion Engines (ICE) on the environment. One area of significant concern in this respect is the reduction of friction losses resulting in reduced emissions and as well as higher fuel efficiency and lower fuel consumption. To decrease these losses, several approaches have been made particularly at design of mechanical parts stage and at experimental level to optimize lubricant components. A great contribution to solve the problem can be given by the optimization of the additives package blended into the engine lubricants. The molybdenum dithiocarbamate (MoDTC) is the additive showing the best tribological performance by acting as friction modifier. It decomposes under high temperatures and pressure, forming layered structures on the engine surfaces. However, the use of effective friction reducing additives to achieve low boundary friction coefficient is not enough to have great engine fuel efficiency. In addition, in fact, it is needed also to maximize their durability, preventing premature consumption or depletion of these additives. It has been shown, in fact, that the friction reduction performance of MoDTC is sensitive to engine operating time and that is related to the degradation of MoDTC itself. In the first part of my thesis we tried to get a good comprehension of the chemical mechanisms of MoDTC ageing and to study the impact on the tribological properties. The chemical bulk oil characterization of MoDTC blended into the base oil when subjected to thermo-oxidative degradation allowed to propose a new hypothetical chemical pathway followed by the friction modifier molecules during the ageing process. At the same time, these findings were linked to the impact of the MoDTC degradation on its tribological properties. As reported in literature, another MoDTC drawback is its strong antagonism with DLC coating. In fact, when DLC-involving contacts are lubricated by MoDTC-containing base oil, a catastrophic DLC wear is produced. For this reason, in the second part of the project a multi-techniques approach has been adopted to get a better understanding of this wear mechanism. The combination of all the findings allowed to propose for the first time a new wear mechanism based on the formation of molybdenum carbide species inside the contact. A strong chemical interaction between the molybdenum-based species formed on the steel counter-body and the carbon of the DLC material has been supposed, leading to the formation of MoC species. All the results found are discussed to clarify the correlation between degradation time, tribological performance and tribofilm characterizations in both steel/steel and DLC/steel contact.

Orientador: Carmen Sílvia Bertuzzo / Dissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Ciências Médicas / Made available in DSpace on 2018-08-27T06:53:07Z (GMT). No. of bitstreams: 1 Rezende_LucianaMontes_M.pdf: 2160530 bytes, checksum: b9f9b53af213aa35b20cf6a49d746a91 (MD5) Previous issue date: 2015 / Resumo: O Câncer de Mama (CM) é a forma de neoplasia mais diagnosticada e a principal causa de morte por câncer em várias regiões do mundo, sendo a maior parte CM esporádico. O estilo de vida reprodutivo representa importante fator de risco relacionado à exposição ao estrógeno durante a vida, visto que o hormônio é responsável por estimular a proliferação celular mamária. Por outro lado, a enzima metilenotetrahidrofolato redutase (MTHFR) regula o balanço celular entre a metilação e a síntese de ácidos nucléicos. Polimorfismos nos genes dos receptores de estrógeno (ESR1 e ESR2) e do metabolismo do folato (MTHFR) têm sido associados ao risco de CM em diferentes populações. Objetivos: Avaliar a associação entre CM esporádico e os polimorfismos c.2014G>A (ESR1), c.1730G>A (ESR2), c.677C>T e c.1298A>C (MTHFR), incluindo as variáveis clínicas. Material e Métodos: Foram selecionadas 253 amostras de DNA de mulheres com CM esporádico do Laboratório de Genética Molecular do Câncer (FCM-Unicamp) e 257 controles femininos com idade superior a 50 anos e sem história familiar para CM ou câncer de ovário. As amostras foram genotipadas por RFLP-PCR. Foram incluídas variáveis clínicas relacionadas ao indivíduo, aos tumores e ao estilo de vida reprodutivo. Para a análise estatística, foi utilizado o software SPSS vs21.0, empregado o teste ?2 para a distribuição dos polimorfismos e, quando observada diferença no percentual destes, foi calculado a Razão de Prevalência. Resultados: Não foi observada diferença significativa entre os grupos em relação à ocorrência de CM para os polimorfismos: c.2014G>A (p=0,281), c.1730G>A (p=0,241), c.677C>T (p=0,443) e c.1298A>C (p=0,805). Ao associar os genótipos às variáveis clínicas, o alelo A (c.2014G>A) foi menos prevalente em tumores com expressão do receptor de estrógeno (RE positivos) (OR=0,469; 95% IC=0,262 ¿ 0,841) e mais prevalente no estadio 0 em relação aos demais (OR=3,911; 95% IC=1,394 ¿ 10,97), enquanto no genótipo GA teve expressão diminuída de RE e no GG, maior expressão de receptor de estrógeno (RP). Para o c.1730G>A, o genótipo GA foi mais prevalente entre as mulheres que amamentaram (OR=2,257; 95% IC=1,254 ¿ 4,061), menos prevalente em hipertensão arterial sistêmica (HAS) (OR=0,578; 95% IC=0,339 ¿ 0,987) e conferiu proteção do estadio 0 em relação aos demais (OR=4,383; 95% IC=1,606 ¿ 11,96). Na análise do haplótipo c.2014G>A/c.1730G>A, GG/GG foi menos prevalente entre as mulheres que amamentaram (OR=0,525; 95% IC=0,298 ¿ 0,924) e teve maior expressão de RP. Para os polimorfismos no MTHFR, o genótipo CC (c.677C>T) representou um fator de risco para metástases a distância (OR=5,311; 95% IC=1,124 ¿ 25,09) e teve menor expressão de RE, enquanto o genótipo AA (c.1298A>C) foi menos prevalente no estadio 0 em relação aos demais (OR=0,034; 95% IC=0,067 ¿ 0,669) e apresentou maior expressão de RE. Na análise do haplótipo c.677C>T/c.1298A>C, o CC/AA foi associado ao uso de contraceptivo hormonal (OR=3,671; 95% IC=1,344 ¿ 10,03) e HAS (OR=1,979; 95% IC=1,036 ¿ 3,782); e o CT/AC foi menos prevalente no carcinoma invasivo de tipo não especial (NST) (OR=0,032; 95% IC=0,243 ¿ 0,918) e conferiu proteção do estadio 0 em relação aos demais (OR=3,476; 95% IC=1,341 ¿ 10,47). Conclusões: Os polimorfismos parecem não alterar o risco para o desenvolvimento de CM esporádico, no entanto, podem estar associados à sua gravidade / Abstract: The Breast Cancer (BC) is the most frequently diagnosed form of cancer and the main cause of cancer death in worldwide. The reproductive lifestyle is an important risk factor related to exposure to estrogen during the life, being the hormone is responsible for stimulating cell proliferation in the breast. On the other hand, the enzyme methylenetetrahydrofolate reductase (MTHFR) regulates cell balance between synthesis and methylation of nucleic acids. Polymorphisms in the genes of the estrogen receptor (ESR1 and ESR2) and folate metabolism (MTHFR) have been associated with risk of breast cancer in different populations. Objectives: To evaluate the association between sporadic BC and c.2014G>A (ESR1), c.1730G>A (ESR2), c.677C>T and c.1298A>C (MTHFR) polymorphisms, including the risk factor and the association with clinical variables. Material and methods: We enrolled 253 DNA samples from women with sporadic BC from Molecular Genetics of Cancer Laboratory (FCM/Unicamp) and 257 female controls over the age of 50 and without family history of BC or ovarian cancer. The samples were genotyped by PCR-RFLP. Clinical variables were included related to the individual, to tumors and reproductive lifestyle. For statistical analysis, SPSS software vs21.0 was used, the ?2 test was applied for the distribution of polymorphisms and when significant differences was observed, we calculated the odds ratio. Results: There was no significant difference between the groups in the occurrence of BC for the polymorphisms: c.2014G>A (p=0.281), c.1730G>A (p=0.241), c.677C>T (p=0.043) and c.1298A>C (p=0.805). By associating genotypes to clinical variables, the A allele (c.2014G>A) was less prevalent in tumors with positive ER (OR=0.469; 95% CI=0.262 to 0.841) and more prevalent in stage 0 compared to the other (OR=3.911; 95% CI=1.394 to 10.97), while the GA genotype had lower expression of ER and GG, most PR expression. For c.1730G>A, the GA genotype was more prevalent among women who breastfed (OR=2.257; 95% CI=1.254 to 4.061), less prevalent in hypertension (OR=0.578; 95% CI=0.339 to 0.987) and conferred protection to stage 0 in relation to others (OR=4.383; 95% CI=1.606 to 11.96). In the haplotype analysis c.2014G>A/c.1730G>A, GG/GG was less prevalent among those who breastfed (OR=0.525; 95% CI=0.298 to 0.924) and had higher PR expression. For polymorphisms in MTHFR, the CC genotype (c.677C>T) was a risk factor for distant metastasis (OR=5.311; 95% CI=1.124 to 25.09) and had lower expression of SR, while the genotype AA (c.1298A>C) was less prevalent in stage 0 in relation to others (OR=0.034; 95% CI=0.067 to 0.669) and showed a higher expression of ER. In the haplotype analysis for c.677C>T and c.1298A>C, the CC/AA combination was associated with hormonal contraceptive use (OR=3.671, 95% CI=1.344 to 10.03) and hypertension (OR=1.979; 95 % CI=1.036 to 3.782). The CT/AC was less prevalent in invasive carcinoma NST (OR=0.032; 95% CI=0.243 to 0.918) and conferred protection to stage 0 in relation to others (OR=3.476; 95% CI=1.341 to 10.47). Conclusions: The polymorphisms analyzed do not appear to alter the risk for developing sporadic BC, however, may be associated with its severity / Mestrado / Ciencias Biomedicas / Mestra em Ciências Médicas

No description available.

Nanoparticles promise many interesting applications because of their exceptional chemical and physical properties. Therefore nanoparticles offer a pathway for the fabrication of new functional, smart materials. Since the primary particle strongly tends to strong agglomeration, and since the surface of nanoparticles is often not compatible with polymers, it is not possible to disperse single particles homogeneously in a polymer melt. Formations of agglomerates are responsible for strong differences in concentration of the nanoparticles in the material matrix and therefore impede a homogeneous property profile. Furthermore properties of compounds are not only determined by single components, but considerably by the interface between these single components. Hence, a strong chemical and physical adhesion between the constituents is required. Thus, surface modification of nanoparticles is a crucial issue. This work focuses on the control of the particle/polymer interface in composite materials which has a thickness of some nanometers. This interface regulates the compatibility of the surface of the nanoparticles and their environment. This interface is also the place where the transmission of energy between nanoparticle and polymer occurs. The interlayer of this boundary surface should be occupied with functional “primer”-macromolecules that provide at least two types of functional groups: one species of functional group should assure the bonding of the primer to the surface of the nanoparticle, and the second type enables the compatibilizing to the matrix, and when indicated also the covalent adhesion to the ambient polymer system. The macromolecular scaffold of the primer permits the selective adjustment of important interface properties as elasticity, durability and the surface energy of the particle – matrix interface. Within this thesis hyperbranched polyethylene (PEI) imine was used as starting platform for “Quat-Primer Polymers” bearing a multitude of functional moieties in form of primary, secondary and tertiary amino groups. Chapter 2 gives a literature – review on hyperbranched polymers – with focus on PEI, stabilization of colloids by polymers, as well as polymer – “nanocomposites”. In Chapter 3 the reaction of PEI with glycidyltrimethylammonium chloride will be described to obtain hyperbranched polymers that consist of (i) the hyperbranched PEI scaffold, (ii) primary, secondary and tertiary amino groups that can be used for further modification reactions with amino-reactive compounds, and (iii) ammonium moieties that can adsorb to negatively charged surfaces. It will be shown that these Quat-Primer polymers have the ability to stabilize several nanoparticles in water to form aqueous dispersions and that they are capable to partially deagglomerate nanoparticles leading to smaller diameters of the particles in the dispersion. Additionally the reaction of hyperbranched polyethylene imine with glycidol will be described displaying a possibility to change the reactivity of the functional groups and exhibiting that also the generated hydroxyl groups generated by the ring-opening reaction of epoxides with PEI react with epoxide rings to form ether linkages. In Chapter 4 the synthesis of several amino-reactive ATRP initiators will be described and two methods to graft PMMA arms to “Quat-Primer polymers” presented in the previous chapter including the “grafting from” and the “grafting to” technique. These synthesized Quat-Primer polymers bearing ammonium moieties, as well as PMMA arms can be used to fabricate PMMA nanocomposites with homogeneously distributed nanoparticles. The developed method allow for grafting monomers that can be used in ATRP polymerization, including acrylates, acrylonitriles and styrenes, to hyperbranched polyethylene imine. Chapter 5 will display pathways to graft caprolactam derivatives to hyperbranched polyethylene imine to generate Quat-Primer polymers bearing ammonium moieties, as well as caprolactam rings. These quat-primer polymers can be used for the fabrication of PA-6 nanocomposites by dispersing nanoparticles in presence of these Quat-Primer polymers and subsequent polymerization.