Doctor of Philosophy / Department of Animal Sciences and Industry / Michael D. Tokach / Eleven experiments using 5,434 growing-finishing pigs were performed in addition to the development of a model to predict dietary NE that yields the greatest economic benefit. Two experiments were conducted to determine the effect of dietary phytogenics on growth and carcass performance of growing-finishing pigs. The addition of the combination of two phytogenics products (EOM 1+2) to diets improved ADFI, HCW, and carcass ADG. However, there was no evidence for treatment differences for growth or carcass performance in a second study. Two experiments were conducted to determine the effects of feeding high SID Trp:Lys ratios with and without Ractopamine HCl (RAC) on growth and carcass characteristics of finishing pigs. In Exp. 1, whereas increasing SID Trp:Lys ratio above 20% improved growth and carcass performance when diets contained RAC, pigs fed SID Trp:Lys ratios above 20% in diets without RAC had reduced growth and carcass performance. Contrary in Exp. 2, pigs fed increasing SID Trp:Lys in diet containing RAC did not provide further performance benefits. Three experiments were conducted to determine the optimum dietary SID Lys and CP concentrations in finishing pigs over 100 kg. The SID Lys requirement to obtain 100% of maximum response was 0.55 to 0.63% depending on the response variable. Growth and carcass performance was maximized in diets containing at least 12% dietary CP. Four experiments were conducted to determine the effects of SBM concentration and whether dEB, choline, or K are the reasons that performance is reduced when pigs over 100 kg BW are fed low CP diets. Performance was reduced as SBM concentration was reduced in the diet. Choline, K, and dEB do not appear to be the reason that performance is reduced when SBM concentration is decreased in low CP diets fed to pigs over 100 kg BW. A Microsoft Excel®-based model to predict the value of dietary NE that yields the greatest economic return to the production system was developed. Furthermore, a meta-analysis was conducted to incorporate the impact of NDF on carcass yield in the model.

O objetivo deste trabalho foi avaliar a substituição parcial (30%) da polpa cítrica peletizada (PCP) por polpa de citros úmida despectinada (PCUD) na ração de bovinos em terminação. No 1o experimento, utilizou-se a PCUD em sua forma in natura. Para este ensaio foram utilizados 48 machos não castrados (24 Nelore e 24 Canchim) com idade aproximada de 18 meses e peso vivo inicial de 404 e 439 kg para Nelore e Canchim, respectivamente. O delineamento utilizado foi o de blocos ao acaso com arranjo fatorial 2x2 (duas raças e dois tratamentos) com os animais agrupados por raça e peso vivo inicial. O período experimental foi de 92 dias divididos em três períodos. As rações foram compostas de bagaço de cana-de-açúcar in natura, PCP, farelo de soja, uréia, núcleo mineral e vitamínico, bicarbonato de sódio e monensina sódica, além da polpa de citros úmida despectinada in natura. No 2o experimento, utilizou-se a PCUD em sua forma ensilada, aditivada na ensilagem ou não com benzoato de sódio (0,18% da MV). Para este ensaio foram utilizados 54 machos não castrados tricross (Nelore/Angus ou Nelore/Santa Gertrudis x Pardo Suíço de corte) com idade aproximada de 16,5 meses e peso vivo inicial de 303 kg. O delineamento utilizado foi o de blocos ao acaso com os animais agrupados por peso vivo inicial. O período experimental foi de 91 dias divididos em três períodos. As rações foram compostas de bagaço de cana-de-açúcar in natura, PCP, farelo de algodão, uréia, núcleo mineral e vitamínico, bicarbonato de sódio e monensina sódica, além da PCUD ensilada com e sem benzoato de sódio. Para os dois ensaios as rações continham 85% de ingredientes concentrados e 15% de bagaço cana-de-açúcar in natura, formuladas de acordo com o NRC (Gado de corte) nível 1 para serem isoprotéicas e com balanço positivo de proteína degradável no rúmen e proteína metabolizável. Foram avaliados o ganho de peso diário (kg/dia de PV), o consumo de matéria seca (kg/dia de MS), a conversão alimentar (consumo de matéria seca/ganho de peso diário), a energia líquida para manutenção, ganho e energia metabolizável das rações (Mcal/kg de MS) e a relação entre a energia calculada com os dados do experimento e a predita pelo NRC (1996) nível 1 (observado/predito). Em ambos os experimentos, a substituição da PCP por PCUD aumentou a ingestão de fibra em detergente neutro e fibra em detergente ácido (P<0,01) e não afetou o consumo de matéria seca (8,05 vs. 8,13 e 7,76 vs. 7,78 kg/dia para o 1o e 2o ensaio, respectivamente), o ganho de peso diário (1,11 vs.1,16 e 1,27 vs. 1,36 kg/dia para o 1o e 2o ensaio, respectivamente) e a conversão alimentar (7,82 vs. 7,29 e 6,62 vs. 5,96 kg de MS/kg de GPD para o 1o e 2o ensaio, respectivamente). Os valores observados de energia líquida de manutenção, ganho e energia metabolizável das rações não diferiram (P>0,05) entre os tratamentos. Já a relação de energia (observada/predita) do tratamento com PCP foi inferior (P<0,05) à da ração contendo PCUD (1,15; 1,39; 1,22 vs. 1,23; 1,51; 1,28 e 1,10; 1,31; 1,18 vs. 1,18; 1,45; 1,24 Mcal/kg MS de ELm, ELg e EM para o 1o e 2o ensaio, respectivamente). A substituição parcial de PCP por PCUD in natura ou ensilada não alterou o desempenho dos animais. / The objective of this study was evaluate despectinated citrus pulp (Braspolpa®) replacing 30% of pelleted citrus pulp in feedlot beef cattle finishing diets. In the first trial, was used despectinated citrus pulp in natura. Forty eight yearling bulls (24 Nelore and 24 Canchim), 18 months old and averaging 404 and 439 kg initial live weight for Nelore and Canchim, respectively. The animals were assigned in a randomized block design with a 2x2 factorial scheme (two breeds and two treatments) and grouped by breed and initial live weight. Experimental period lasted 92 days, with three periods. Diets contained sugar cane bagasse in natura, dried citrus pulp, soybean meal, urea, mineralvitamin mix, sodium bicarbonate, sodium monensin, and the energy sources tested (despectinated citrus pulp). In the second trial, the despectinated citrus pulp was ensiled with or without sodium benzoate (0.18% of GM). Fifty four yearling bulls (Nelore/Angus or Nelore Santa Gertrudis x Braunvieh), 16.5 months old and averaging 303 kg initial live weight. The animals were assigned in a complete randomized block design, and grouped by initial live weight. Experimental period lasted 91 days, with three periods. Diets contained sugar cane bagasse in natura, dried citrus pulp, cotton meal, urea, mineral-vitamin mix, sodium bicarbonate, sodium monensin, and the energy sources tested (despectinated citrus pulp with and without sodium benzoate). For these two trials, the rations were composed of 85% of the concentrate and 15% of the sugar cane bagasse in natura, and were balanced according to NRC (1996) level 1, to reach isonitrogeneous with positive rumen degradable protein and metabolizable protein balances. Variables evaluated were daily weight gain (DWG, kg/day), dry matter intake (DMI, kg DM/day), feed conversion (FC, kg DMI/kg DWG), net energy for maintenance and gain values, and the ratio between calculated net energy (based on experimental data) and net energy predicted by NRC (1996), level 1 (observed/predicted). In both trials, the substitution of dried citrus pulp for despectinated citrus pulp increased the NDF and ADF intakes (P<0.01) and did not affect (P>0.05) DMI (8.05 vs. 8.13 and 7.76 vs. 7.78 kg/day for the first and second trials, respectively), DWG (1.11 vs. 1.16 e 1.27 vs. 1.36 kg/day for the first and second trials, respectively), neither FC (7.82 vs. 7.29 e 6.62 vs. 5.96 kg of DM/kg for the first and second trials, respectively). Observed values for net energies of maintenance and gain did not differ among treatments (P>0.05). According to the experimental data, the net energy relation (observed/predicted) for the PCP treatment was lower (P<0.05) than PCUD treatment (1.15; 1.39; 1.22 vs. 1.23; 1.51; 1.28 and 1.10; 1.31; 1.18 vs. 1.18; 1.45; 1.24 Mcal/kg DM of NEm, NEg and ME for the first and second trials, respectively). The partial replacing of PCP for PCUD in natura or ensiling did not change the animal performance.

Submitted by (edna.saturno@ufrpe.br) on 2017-04-12T13:39:17Z No. of bitstreams: 1 Evaristo Jorge Oliveira de Souza.pdf: 1070758 bytes, checksum: 357f837383506ddadc3af5f661c13bc8 (MD5) / Made available in DSpace on 2017-04-12T13:39:17Z (GMT). No. of bitstreams: 1 Evaristo Jorge Oliveira de Souza.pdf: 1070758 bytes, checksum: 357f837383506ddadc3af5f661c13bc8 (MD5) Previous issue date: 2010-08-13 / Conselho Nacional de Pesquisa e Desenvolvimento Científico e Tecnológico - CNPq / The objective of this work was to evaluate of carcass traits, deposition pattems of body tissues, energy and protein requirements of Nellore (NE), Nellore x Angus (NA) and Nellore x Simental (NS), fed with two levels concentrate (30 and 50% of dry matter diet in concentrate). Sixty nine heifers (23 NE, 23 NA and 23 NS) were used, being 12 heifers (four in each genetic group) slaughtered before the beginning of the experiment as the baseline group. Twelve heifers (four in each genetic group) were fed the level maintenance and thirty six (twelve in each genetic group) were ad libitun fed with 30 (six in each group) and 50% (six in each group) of dry matter diet in concentrate. Nine remaining animals were to digestibility trial. At the end of the experiment all these animals were slaughtered and its corporal composition and empty body weight (EBW) determined. The net energy requirements for gain were estimate as a retained energy (RE) as a function of EBW0,75 and empty body gain (EBG). The net energy requirements for maintenance were obtained as a function of heat production (HP) on metabolizable energy intake (MEI). The metabolizable energy requirements for maintenance were obtained as a function of RE and MEI. The net protein requirements for gain were estimate as retained protein (RP) as RE and EBG. The requirements of metabolizable protein for maintenance were estimate as metabolizable protein intake (MPI) as function of empty body gain (EBG). The net protein requirements for maintenance as RP as a function MPI. Chemical constituents of EBW and EBG there were not effects of genetic group (P>0.05). There were not effects of genetic group in energy and protein requirements so it’s proposed the model RE = 0.0703 * EBW0.75 * EBG1.128 for net energy requirements for gain and NPg = 197.40 * EBG – 11.14 * RE for net protein requirements for gain. The net and metabolizable energy requirements for maintenance for all group were 70.55 and 106.53 kcal/EBW0.75/day, respectively. The net protein requirements for maintenance was 1.07 g/ EBW0.75/day and the metabolizable protein requirements for maintenance were 3.88 g/EBW0.75/day for all group. / Este trabalho objetivou determinar as características de carcaça, a taxa de deposição de tecidos corporais e as exigências nutricionais de energia e proteína para fêmeas Nelore (NE), F1 Nelore x Angus (NA) e F1 Nelore x Simental (NS), alimentadas com dois níveis de concentrado (30 e 50%). Foram utilizadas 69 novilhas de três grupos genéticos, sendo 23 NE, 23 NA e 23 NS, das quais 12 pertencentes ao grupo referência (quatro de cada grupo genético) foram abatidas ao início do experimento. Outras 12 novilhas (quatro de cada grupo genético) foram alimentadas ao nível de mantença e 36 novilhas (12 animais de cada grupo genético) foram mantidas em sistema de alimentação à vontade com 30 (seis de cada grupo) ou 50% (seis de cada grupo) da matéria seca da ração em concentrado. As nove fêmeas restantes (três de cada grupo genético) foram utilizadas em um experimento paralelo para estimativa da digestibilidade das rações. Ao final do experimento todos os animais foram abatidos e a composição corporal e o peso de corpo vazio (PCVZ) determinados. As exigências líquidas de energia para ganho foram estimadas pela equação da energia retida (ER) em função do peso de corpo vazio (PCVZ) e ganho de peso de corpo vazio (GPCVZ). As exigências de energia líquida para mantença foram obtidas pela equação da produção de calor (PC) e o consumo de energia metabolizável (CEM). As exigências de energia metabolizável para mantença foram estimadas a partir da relação entre a ER e o CEM. Os requerimentos líquidos de proteína para ganho foram estimados pela proteína retida (PR) em função do GPCVZ e ER. Os requerimentos de proteína metabolizável para mantença foram obtidos contrastando o consumo de proteína metabolizável (CPM) com o GPCVZ. As exigências líquidas de proteína para mantença foram obtidas pela equação de regressão da proteína retida e o CEM. Os constituintes químicos do peso de corpo vazio e do ganho de peso de corpo vazio não sofreram efeito dos grupos genéticos (P>0,05). Não houve efeito dos grupos genéticos sobre as exigências de energia e proteína; desta forma, recomenda-se o uso das equações ER = 0,0703 x PCVZ0,75 x GPCVZ1,128 para predizer as exigências líquidas de energia para ganho e PLg = 197,40 x GPCVZ – 11,14 x ER para predizer as exigências líquidas de proteína para ganho. As exigências de energia líquida e metabolizável para mantença de todos os grupos foram 70,55 e 106,53 kcal/kgPCVZ0,75/dia, respectivamente. As exigências de proteína líquida para mantença foi 1,07 g/PCVZ0,75/dia e os requerimentos de proteína metabolizável para mantença foram 3,88 g/PCVZ0,75/dia para todos os grupos.

The intent of this thesis is to analyse the sustainability of producing bio-ethanol from cane molasses in Indonesia and its potential to replace gasoline in the transportation sector. A field trip was conducted in East Java, Indonesia, and data was gathered for analysis. Life cycle assessment (LCA) was performed to analyse the net emissions and energy consumption in the process chain. The greenhouse gas (GHG) emissions of the life cycle are 17.45 gCO2e per MJ of ethanol produced. In comparison to gasoline, this results in a 78% reduction in GHG emissions in the complete process chain. Net Energy Value (NEV) and Net Renewable Energy Value (NREV) were 6.65 MJ/l and 24 MJ/l. Energy yield ratio (ER) was 9.43 MJ of ethanol per MJ of fossil energy consumed in the process. Economic allocation was chosen for allocating resources between sugar and molasses. Sensitivity analysis of various parameters was performed. The emissions and energy values are highly sensitive to sugarcane yield, ethanol yield and the price of molasses. Alternative management options were considered for optimizing the life cycle. Utilizing ethanol from all the mills in Indonesia has a potential to replace 2.3% of all motor gasoline imports. This translates in import savings of 2.3 trillion IDR per year. Use of anaerobic digestion or oxidation ponds for waste water treatment is unviable due to high costs and issues with gas leakage. Utilizing 15% of cane trash in the mill can enable grid independency. Environmental impacts due to land use change (Direct &amp; Indirect) can be crucial in overall GHG calculations. Governmental regulation is necessary to remove current economic hurdles to aid a smoother transition towards bioethanol production and utilization. / Harnessing agricultural feedstock and residues for bioethanol production - towards a sustainable biofuel strategy in Indonesia

With environmental concerns and energy needs increasing, many regions in the world are promoting renewable energy technologies making use of various policy instruments. Although today the PV systems price is decreasing, which gives it a competitive edge; we see the technology still being dependent on policy instruments for its dissemination.   The aim of this study is to research on whether or not a solar PV system is economically viable under certain circumstances. The study analyzes this by performing a cost beneficial analysis for the lifetime of the solar PV system making use of a discounted savings model. The systems being considered in this study are from California and Germany as these regions are leading in solar PV dissemination in their respective regions. The policies that are aiding the deployment of solar PV technologies are varied and thus this study compares benefits from different policy instrument for a residential customer investing in a solar PV system.   The research objectives in this study are pursued making use of major concepts such as Grid Parity, Levelized Cost of Electricity and financial methods such as discounting.  Further, to understand how the different independent variables such as retail electricity prices, PV system pricing, WACC, self-consumption rate and storage availability are having an impact and how the results change with variation in these variables, a sensitivity analysis is conducted.   The results obtained in this study show that a solar PV system installed in California and Germany both make net benefits over their lifetime. When compared, the Californian solar PV system under the Net Energy Metering policy is making more net economic benefits in the range of $ 40,351 in Eureka and $53,510 in San Francisco; when compared to the German solar PV systems under the Feed in Tariff ranging $4,465 in Berlin and $11,769 in Munich. Furthermore the Californian solar PV systems still prove to be more beneficial even when compared to the German solar PV systems under the self-consumption law of the Feed in Tariff ranging $ 6,443 in Berlin and $ 13,141 in Munich.  But when the self-consumption rate is increased in the German case, it is noted that the associated benefits increase.   The study at hand thus results in the California Net Energy Meter policy instrument proving to be more beneficial to a residential customer than the German Feed in tariff with and without self-consumption. Another important finding made in this study is that despite the German solar PV system making lesser benefits than the Californian ones, they attain Grid Parity before the ones in California.

Global warming is one of the biggest challenges today, and the construction sector is one of the main sectors contributing to climate change. Due to this, using environmentally friendly materials in construction is an important decision against global warming. This thesis aims to evaluate the most important building envelope components to achieve a house in Sweden to become near net-zero energy building (ZEB). Due to this, different ecological insulation materials, and window types were presented, analyzed, and evaluated to choose the most energy-efficient alternatives for the Utsikten village project. In terms of reduction of electricity bought, renewable energy on-site photovoltaic (PV) and ground source heat pump systems are used. In this study, numerical simulations for building envelope components such as windows, ground floor, external walls, and roofs were performed to evaluate the thermal performance of the components by IDA ICE and UBAKUS. The primary energy for different building cases has been calculated to evaluate thermal performance and energy classification levels to identify the most environmentally friendly solutions. There is a variation of ecological material for insulation that can be used for different parts of the building envelope. In general, ecological insulation material has less life expectancy but a much lower environmental impact compared to minerals and synthetic materials. However, there are also some limitations to using some ecological insulation materials in the ground construction. This study also shows how several pane glasses, gap dimensions, gas fill gap, and Low-E coating impact the energy performance of the windows and the building. Simple solar PV panel simulation shows that the maximum electricity production on a site is very related to orientation, tilt, and sun exposure. The result of this master thesis shows that it is possible to reach near-net-zero energy building by enhancing building envelope components and using renewable energy sources for heating, cooling, and electricity production.

本文以最適控制理論證明，獎勵再生能源產出之政策，應以再生能源淨能源產出做為獎勵的基礎，而非現行以再生能源總能源產出做為獎勵基礎之模式。這裡的淨能源產出，指的是再生能源廠商生產出之再生能源，減去生產再生能源時所用的能源投入。本文首先將社會最適情況下的總能源產出分別與以淨能源產出和總能源產出為獎勵政策基礎之價格與數量政策下之總能源產出作比較，提出獎勵再生能源產出的政策，需以淨能源產出做為獎勵的基礎，而非現行以總能源產出作為基礎的政策，接著，在以淨能源產出為基礎的政策下，探討環境外部性與防治成本以及研究發展的議題。 / By the optimal control theory, this paper proves that policies on encouraging the production of renewable energy should be based on its net output or net energy instead of on its gross output or gross energy. Here net energy is defined as the surplus of renewable energy output minus energy input from its production. This paper first compares the optimal gross output of the renewable energy under the social optimal condition with the gross outputs under the price-based policy instrument and the quantity-based policy instrument based on net energy output and gross energy output, respectively, suggesting that policy instruments used to encourage the production of renewable energy should be based on its net output instead of on its gross output. Finally, it probes the cases of environmental externality and R&D based on the net output of renewable energy.

Large-scale deployment of low-carbon energy technologies is important for counteracting anthropogenic climate change and achieving universal energy access. This thesis explores potential growth rates of technologies necessary to reach a more sustainable global energy system, the material and energy flows required to commission these technologies, and potential future availability of the required resources. These issues are investigated in five papers. Potential future growth rates of wind energy and solar photovoltaics, and the associated material requirements are explored, taking the expected service life of these technologies into account. Methodology for assessing net energy return and natural resource use for wind energy systems are analyzed. Potential future availability of lithium and phosphate rock are also investigated. Estimates of energy and materials required for technologies such as wind energy and photovoltaics vary, and depend on the assumptions made and methods used. Still, it is clear that commissioning of low-carbon technologies on the scale required to reach and sustain a low-carbon energy system in coming decades requires significant quantities of both bulk materials and scarcer resources. For some technologies, such as thin film solar cells and electric vehicles with lithium-ion batteries, availability of materials could become an issue for potential growth rates. Future phosphate rock production could become highly dependent on few countries, and potential political, social and environmental aspects of this should be investigated in more detail. Material and energy flows should be considered when analyzing growth rates of low-carbon technologies. Their estimated service life can indicate sustainable growth rates of technologies, as well as when materials are available for end-of-life recycling. Resource constrained growth curve models can be used to explore future production of natural resources. A higher disaggregation of these models can enable more detailed analysis of potential constraints. This thesis contributes to the discussion on how to create a more sustainable global energy system, but the methods to assess current and future energy and material flows, and availability of natural resources, should be further developed in the future.

O etanol está consolidado como combustível para movimentação de veículos leves no Brasil e, nos últimos 40 anos, apenas a cultura de cana-de-açúcar tem sido explorada comercialmente para a produção deste combustível. Por outro lado, o desenvolvimento agrícola vem proporcionando safras recordes de grãos nas últimas décadas. A produção de milho se destaca pelo aumento da produtividade, podendo ser semeado como cultura principal ou como cultura de inverno em rotação com a soja. O sorgo, por sua vez, pode atuar como um substituto do milho, apresentando maior rusticidade e tolerância à seca. Dada essa conjuntura, usinas de etanol do Mato Grosso se associaram a produtores de milho e sorgo para incluir novas matéria-primas no processo de produção de combustíveis, compartilhando uma mesma unidade industrial, denominada Usina Integrada ou Usina Flex. No contexto atual, o desenvolvimento de novas tecnologias e setores produtivos exige a consideração de suas potenciais implicações energéticas e ambientais. A Avaliação de Ciclo de Vida (ACV) é uma ferramenta da gestão ambiental usada para avaliar impactos ambientais potenciais associados a produtos, processos e serviço. Sua principal característica é se prestar a essa avaliação de forma sistêmica, levando em conta todas as etapas do seu ciclo de vida. O objetivo deste trabalho foi avaliar e comparar os desempenhos ambiental e energético da produção de etanol a partir dos ativos agrícolas cana-de-açúcar, milho e sorgo, no contexto de usina autônoma integrada, segundo a abordagem do ciclo de vida. Para tanto, estudos de ACV foram conduzidos para cada um dos três produtos, seguindo as diretrizes das normas ABNT NBR ISO 14.040:2009 e ABNT NBR ISO 14.044:2009. Para a análise ambiental aplicou-se o método de Avaliação de Impacto do Ciclo de Vida (AICV) ReCiPe midpoint e, para a análise energética, o método Demanda de Energia Cumulativa foi utilizado, seguido pelo cálculo dos Índices de Retorno Energético sobre o Investimento (EROI) para cada combustível. A unidade funcional dos estudos foi 1 m³ de etanol hidratado e o sistema de produto incluiu a produção de insumos, produção da matéria-prima agrícola, produção de etanol, cogeração e etapas de transporte. Os resultados da análise ambiental demonstraram que o etanol de cana-de-açúcar apresenta melhor desempenho do que o etanol de milho e de sorgo em um número maior de categorias de impacto. As análises energéticas demonstraram que o uso de cavaco de madeira na etapa de cogeração dos processos de produção de etanol de milho e sorgo traduziu-se em ganhos energéticos, mas o etanol de cana-de-açúcar ainda apresenta um desempenho melhor por utilizar o bagaço para cogeração. Em termos de EROI, o etanol de cana-de-açúcar disponibilizou 9,77 unidades de energia para cada unidade consumida, o etanol de milho disponibilizou 2,68 e o etanol de sorgo disponibilizou 3,10. / Ethanol is consolidated as fuel to drive light vehicles in Brazil, but for the past 40 years, only the cultivation of sugarcane has been commercially exploited for the production of this fuel. On the other hand, agricultural development has provided high yields of grain in recent decades. Corn production is distinguished by increased productivity, and can be sown as main crop or as a winter crop in rotation with soybeans. Sorghum, in turn, has a higher roughness and tolerance to drought and can act as a substitute for corn. Given this situation, ethanol plants in Mato Grosso were associated with corn and sorghum producers to include new raw materials in the fuel production process, sharing the same plant, called Integrated Plant or Plant Flex. However, the development of new technology and production sectors requires consideration of its potential energy and environmental implications. The Life Cycle Assessment (LCA) is management tool used to evaluate potential environmental impacts associated with products, processes and services. Its main feature is to provide such an assessment in a systematic way, taking into account all stages of their life cycle. The objective of this study was to evaluate and compare the environmental and energy performance of ethanol production from sugarcane, corn and sorghum in the context of integrated autonomous plant, according to the life cycle approach. For that, LCA studies were conducted for each of the three products, following the guidelines of the standards ISO 14040: 2009 and ISO 14044: 2009. For environmental analysis the method of Life Cycle Impact Assessment (LCIA) Recipe midpoint was applied and for energy analysis Cumulative Energy Demand method was used, followed by the estimate of the Energy Return On Investment (EROI) for each fuel. The functional unit of the studies was 1 m³ of hydrous ethanol and the product system includes the production inputs, production of agricultural raw material, production of ethanol, cogeneration and transport stages. The results of the environmental analysis showed that the ethanol sugarcane performs better than the ethanol maize and sorghum in a greater number of impact categories. Energy analyzes have shown that the use of wood chips in cogeneration stage of corn ethanol production processes and sorghum has resulted in energy savings, but the ethanol sugarcane still performs better by using bagasse for cogeneration. In terms of EROI, the sugarcane ethanol provided 9.77 units of energy for every unit consumed, corn ethanol provided 2.68 and sorghum ethanol provided 3.10.

Syftet med rapporten är att göra en jämförelse av två olika metoder för att kyla ett fiktivt kontorshus som är 2 000 m² stort och beläget i Västerås. För att representera ett normalt kontorshus har kyleffektbehovet valts till 50 W/m² vilket ger totala kyleffektbehovet 100 kW. I ena fallet finns en kylmaskin som kyler byggnaden och i andra byts kylmaskinen mot ett antal borrhål som motsvarar hela kyleffekten. För att kunna bedöma de tekniker som har använts har energianvändning och växthuspotential beräknats i ett livscykelperspektiv. Denna energianvändning beräknas som inbäddad energi, vilket är all energi som använts från framtagande av råmaterialen till färdiginstallerat system. Växthuspotentialen beräknas i alla dessa steg som totala koldioxidekvivalenter. Ett sätt att bedöma den energibesparing som har gjorts är med en EROI-analys. EROI beräknas som sparad energi dividerat med investerad energi och är ett dimensionslöst tal som ger en indikation på hur värdefull investeringen är från energisynpunkt. Kylbehovet som finns i byggnader består av värmeöverskott, som uppkommer av bland annat belysning, datorer, kopiatorer och värme från människor. För att kyla bort denna värme finns ett antal olika kyltekniker. Kylmaskinen betraktas ofta som det klassiska sättet att skapa kyla, men är förknippad med en stor energianvändning under dess drift, främst till kompressor-drift. Till borrhålslösningen utgör en cirkulationspump enda elbehovet för att kunna skapa kyla, eftersom denna driftenergi är mycket lägre än för kylmaskinens kompressor ses ofta kyla från borrhål som gratis- eller frikyla. Byggnadens kylenergibehov har bedömts till 40 kWh/m2, år eller totalt 80 000 kWh/år. Detta kylenergibehov ger upphov till driftenergibehov. De årliga elbehoven beräknades till 26 145 kWh/år för kylmaskinen och 2 000 kWh/år för borrhålen. Dessa elbehov motsvarar de totala energierna 4 235 460 MJ för kylmaskinen samt 324 000 MJ för borrhålen under byggnadens livslängd. För att beräkna den inbäddade energin i dessa två lösningar krävdes livscykelanalyser. Det framkom snart att det inte fanns, av denna anledning användes byggvarudeklarationer för komponenterna. Till det hämtades livscykelanalyser för material. I de fall där det funnits varken livscykelanalyser eller byggvarudeklarationer har antaganden gjorts. Det som saknades var information om vad en kylmaskin innehåller, därför har det antagits att en värmepump och kylmedelkylare tillsammans kan fungera på samma sätt som en kylmaskin. Resultatet av beräkningarna för den inbäddade energin, tillverkning och transporter, beräknades till 74 627 MJ för kylmaskinen och 480 490 MJ för borrhålslösningen. Koldioxidutsläppen i samma skeden blev 4,8 ton koldioxidekvivalenter för kylmaskinen respektive 29,5 ton koldioxidekvivalenter för borrhålen. De stora skillnader som ses i inbäddad energi och koldioxidekvivalenter uppkommer av dieselanvändning, som krävs för att borra borrhålen. I denna rapport studeras scenariot att ersätta en kylmaskin som använts i fem år med ett antal borrhål, med samma kyleffekt, om detta kan vara fördelaktigt ur en energi- och miljömässig synpunkt. Studien visar att efter bara 4,5 år använder borrhålslösningen mindre energi, trots den höga inbäddade energin vid installationen. Den stora skillnaden består av elbehovet i driftskedet, där borrhålen har en cirkulationspump som använder betydligt mindre el än kylmaskinens kompressor. Den andra kategorin som har undersökts i denna studie har varit växthuspotential i form av koldioxidekvivalenter, som uppkommer under hela livstiden för båda lösningarna. Ett av kylmaskinens utsläpp kommer från köldmediet (R407C), ett kg köldmedie motsvarar 1 526 kg koldioxidekvivalenter. Det antogs att 4 % av detta köldmedie årligen läcker till omgivningen under alla år 45 år, detta läckage gav en total växthusverkan på 46,6 ton koldioxidekvivalenter. Det förekommer även stora koldioxidutsläpp i driftskedet, eftersom elbehoven är totalt 1 177 MWh för kylmaskinen och 90 MWh för borrhålen. En litteraturstudie visade att koldioxid-utsläppen vid produktion av el varierar mycket beroende på vilka förhållanden som råder, utsläppen varierar från 0 till 1 269 kg/MWh. Det visade sig dock att borrhålets koldioxid-utsläpp är lägre än kylmaskinens även vid låga koldioxidemissioner från elproduktion. Detta beror på läckaget av köldmedie som förekommer i kylmaskinen. Resultaten visar att oavsett utsläpp från elproduktion kommer borrhålen ha en lägre växthuspotential än kylmaskinen. Om kylmaskinen skulle användas under byggnadens livslängd skulle den ha en viss inbäddad energi och om borrhålen användes under byggnadens livslängd skulle de ha en annan inbäddad energi. Skillnaden i dessa energier kallas sparad energi. Investerad energi beräknas som den energi som krävs för att ersätta kylmaskinen med borrhålen. Med sparad och investerad energi kan först nettoenergin beräknas som skillnaden mellan dessa, den blev 3 089 025 MJ. EROI beräknas sedan som kvoten av sparad och investerad energi och blev 7,4, vilket innebär att ett byte av en befintlig kylmaskin till en borrhålslösning är fördelaktig ur energisynpunkt. / The purpose of this study is to compare cooling from a refrigeration machine and a borehole system. These technologies are chosen because they are observed as each other’s opposites. A refrigeration machine is associated with a requirement of large amounts of electric energy, while the borehole system is often seen as free cooling. The study is performed on a fictional building located in Västerås. The building has an area of 2 000 m² and a cooling requirement of 50 W/m². In the scenario studied the building is already equipped with a refrigeration machine, the goal is to examine if it can be motivated to remove this machine and replace it with a borehole system. The chosen environmental impact categories are embodied energy and carbon dioxide equivalents. In order to evaluate the embodied energy, EROI (Energy return on investment) is used to calculate the energy saved by removing the refrigeration machine. For the refrigeration machine most of the energy used is during the operation phase, this is because of the compressor which is used to produce cooling energy. In the borehole system 40 % of the energy used is during the operation phase and 60 % during the manufacturing phase. The drilling used 8.1 m3 diesel fuel, which dominated both the embodied energy and the carbon dioxide emissions of the borehole system. Results show that after only 4.5 years after installation the borehole system has less total embodied energy. EROI was then calculated as saved energy divided by invested energy and the result was an EROI of 7.4. The carbon dioxide emissions from both systems are heavily dependent on the CO2-emissions from electricity generation. Though, if a refrigeration machine were used during the buildings entire lifetime the leakage of refrigerant would be big enough to counteract this dependence.