Thesis (doctoral)--Helsinki University of Technology, 2000. / Includes bibliographical references. Also available on the World Wide Web.

Phosphine complexes of nickel and palladium provide the best catalysts for the homogeneous catalysed carbon-carbon bond forming reaction between an organometallic nucleophile and an organic electrophile. Use of a homochiral ligand on the catalyst can lead to stereoselectivity in the cross-coupling reaction, with high ee's of coupled product being obtained. The processes of selectivity in the transmetalation step of the catalytic cycle have not been elucidated and the initial aim of the project was to study these processes. Initial experiments using organotin derivatives as the organometallic nucleophile highlighted the problems of selectivity and the forcing conditions needed in the attempted transfer of a benzyl group from the tin to the palladium catalyst. The compounds [8- (dimethylamino)-1-naphthyl]methyldiphenyltin (60) and [2-((dimethylamino)methyl) phenyl]methyldiphenyltin (70) were prepared and their reactivity in the palladium catalysed cross-coupling with 2-furoyl chloride, to give 2-benzoylfuran, was investigated. These molecules were found to undergo facilitated transfer of a phenyl group compared to transfer from control molecules. The effect was tested and attributed to the internal nucleophilic attack at the tin atom by the lone pair on the nitrogen atom. The compound [2- ((dimethylamino)methyl)-3-trimethylsilylphenyl]methyldiphenyltin (79) was prepared to test the effects of steric buttressing within the molecule, but was found to be of the same order of magnitude of reactivity as (60) and (70). All three molecules showed a reactivity of at least an order of magnitude greater than control compounds. The effect did not prove applicable to the transfer of a benzyl group or in other coupling reactions. The effect of palladium ligation was tested and the ligand triphenyl arsine found to increase the rate of the coupling reaction. The two facilitating processes were found to work in a co-operative fashion, giving a rate enhancement of ca. one hundredfold over control reactions. The nickel catalysed cross-coupling of α-substituted sp³ hybridised Grignard reagents with allylic esters was attempted, but proved unsuccessful. Stoichiometric reactions with nickel complexes were also found to be unsatisfactory in yielding coupled products. The synthesis of α-substituted diorganozinc reagents was attempted, but furnished only homocoupled products. The reaction of dibenzylzinc with aldehydes was found to proceed in the absence of catalyst, highlighting the reactivity of a benzylzinc moiety.

Steam reforming is the most economical and widely-used route for the conversion of light hydrocarbon (such as natural gas) to various valued-added products. This process is commonly carried out over a low-cost alumina-supported nickel catalyst, which often suffers from carbon deposition resulting in loss of active sites, flow and thermal maldistribution, as well as excessive pressure drop. A bimetallic catalyst with improved anti-coking properties was formulated by incorporating the nickel-based system (15% loading) with cobalt metal (5% loading). Two-level factorial design was employed to investigate the effect of major preparation variables, namely impregnation pH value (2-8), calcination temperature (873-973 K), heating rate (5-20 K min-1) and time (1-5 h). The catalysts prepared were subjected to various characterisation techniques to determine key physicochemical properties (i.e. BET area, H2-chemisorption and NH3- TPD acidity). X-ray diffraction revealed that NiO, Co3O4, NiCo2O4 and a proportion of Ni(Co)Al2O4 aluminates were transformed during H2-reduction to active Co and Ni crystallites. TEM images showed an egg yolk profile in the low-pH catalyst suggesting that main deposition site was located in the particle centre, while metal deposition occurred primarily around the particle exterior for the high-pH catalyst. Temperature programmed experiments were carried out to examine the extent of conversion, type of surface species and solid-state kinetics (using the Avrami-Erofeev model) involved during various stages in catalyst life-cycle (calcination, reduction, oxidation and regeneration). Steam reforming analysis suggested that enhanced catalyst activity may be due to synergism in the Co-Ni catalyst. Specifically, the low-pH catalyst exhibited better resistance towards carbon-induced deactivation than the high-pH formulation. The study also provided the first attempt to develop a quantitative relation between catalyst preparation conditions and its performance (activity, product selectivity and deactivation) for steam reforming reaction. Deactivation and reforming kinetic coefficients were simultaneously evaluated from propane reforming conversion-time data under steam-to-carbon ratios of 0.8-1.6 and reaction temperatures between 773-873 K. The time-dependent optimum operational policy derived based on these rate parameters gave better conversion stability despite the heavy carbon deposit. Thermal runs further showed that the catalysts regenerated via two-stage reductive-oxidative coke burn-off exhibited superior surface properties compared to those rejuvenated by a single-step oxidation.

Dissertation (Ph. D.)--University of Akron, Dept. of Chemical Engineering, 2007. / "December, 2007." Title from electronic dissertation title page (viewed 03/12/2008) Advisor, Steven S. C. Chuang; Committee members, Lu-Kwang Ju, Edward Evans, W. B. Arbuckle, Stephen Z. D. Cheng; Department Chair, Lu-Kwang Ju; Dean of the College, George K. Haritos; Dean of the Graduate School, George R. Newkome. Includes bibliographical references.

Submitted in fulfillment of the academic requirements for the award of the degree of Master of Engineering, Durban University of Technology, Durban, South Africa, 2018. / Overdependence on fossil-based fuels and their effect on environment is a global concern by energy stake holders. Bulk of present day hydrogen comes from gasification of coal, steam reforming and partial oxidation of hydrocarbons. Steam reforming accounts for over 50% of world hydrogen production despite producing carbonaceous gases which are harmful to the environment and poisonous to both; proton exchange fuel cells and alkaline fuel cells. Natural gas is a preferred feed for hydrogen production, because it is abundantly available on earth. Catalytic decomposition of ammonia can produce clean hydrogen but ammonia itself is an air pollutant. Catalytic decomposition of methane into carbon and hydrogen is an attractive option to producing clean hydrogen because its products are carbon and hydrogen. In this work, five different catalysts comprising of varying quantities of nickel and lithium, supported on calcium oxide were synthesized by incipient wetness impregnation method and designated according to weight % as; 30%Ni/CaO, 37.5%Ni-12.5%Li/CaO, 25.0%Ni- 25.0%Li/CaO, 12.5%Ni-37.5%Li/CaO and 50%Li/CaO. The synthesized catalysts were characterized by (XRD, SEM, BET and TEM) and tested for methane decomposition. From the XRD patterns of the synthesized catalysts, distinct crystalline phases of CaO and NiO were positively identified in 50%Ni/CaO according to their reference JCPDS files. Introduction of Lithium hydroxides improved the crystalline structure of the Ni/CaO catalyst. SEM analyses of the catalyst material using Image-J software confirmed that all catalyst materials were nanoparticles ranging from 3.09-6.56nm. BET results confirmed that, all the catalysts are mesoporous with pore sizes ranging from 20.1nm to 45.3nm. Introduction of LiOH to Ni/CaO generates mesoporous structures by destructing the lattices of the CaO structure during the formation of Ni-Li/CaO species. Particle size distribution in TEM analyses revealed that, a higher nickel loading in the catalyst favours the formation of carbon nanotubes while higher lithium hydroxide loading favours the formation of carbon fibres (CF). Low yield of carbon fibres from methane decomposition on unsupported Ni catalyst in 50%Ni/CaO was attributed to the presence of large Ni particles with low index planes which were incapable of dissociating the unreactive methane molecule. The aim of this work was to synthesize a catalyst for use in decomposition of methane into carbon and hydrogen, that addresses drawbacks of traditional solid metal catalysts such as sintering and coking. From the experimental results, 37.5%Ni-12.5%Li/CaO catalyst recorded 65.7% methane conversion and 38.3%hydrogen yield while 50%Ni/CaO recorded the lowest methane conversion of 60.2% and a hydrogen yield of 35.7% at 650℃. Outstanding performance of the 37.5%Ni-12.5%Li/CaO catalyst is attributed to the incorporation of lithium hydroxide which provided more catalyst active sites and a molten environment for proper dispersion of the nickel metal. The solid 50%Ni/CaO catalyst readily deactivated due to coking unlike the supported molten 37.5%Ni-12.5%Li/CaO catalyst in which methane decomposition reaction took place by both surface reaction and chemisorption. / M

Catalytic ethylene oligomerization is a well understood industrially viable process. The large majority of scientific literature and patents concerning this process has been developed with the use of chromium catalysts. Commercial systems producing selective tri/tetramerization, non-selective oligomerization and polymerization are all based on this metal with the exception of a few systems based on other transition metals (Zr, Ti, Ni etc.). This versatility raises interesting questions about chromium’s unique behaviour. Essentially, selective or non-selective oligomerization and polymerization processes could be regarded as belonging to the same category of C-C bond forming reactions, though different mechanisms are involved. The first part of this thesis explores a variety of chromium complexes for ethylene oligomerization purposes. In order to gather further information about the unique behaviour of chromium, we have explored a variety of nitrogen and phosphorus containing ligands. We started with a simple bi-dentate anionic amidophosphine (NP) ligand and assessed the role of the ligand’s negative charge and number of donor atoms in determining the type of catalytic behaviour in relation to the metal oxidation state. This ligand proved capable of generating a series of chromium dimeric, tetrameric or polymeric and even heterobimetallic chromium-aluminate complexes in different valence states. This allowed us to isolate a “single component” self activating Cr(II) complex as well as a rare example of mixed valence Cr(I)/Cr(II) species. Additionally, each of these species acted as switchable catalyst depending on the type of co-catalyst

M.Sc. / 2-(Pyrazol-1-ylmethyl)pyridine ligands were synthesised by phase transfer alkylation of 2-picolyl hydrochloride with the appropriate pyrazole. These ligands were subsequently reacted with NiCl2, NiBr2, FeCl2 or CoCl2 to form the respective complexes. The substituents on the pyrazole included phenyl and tert-butyl groups as well as electron withdrawing CF3 groups. The substituents played an important role in the steric and electrophilic nature of the metals. A second ligand design is 2,6-bis(pyrazol-1-ylmethyl)pyridine and were prepared by phase transfer alkylation of 2,6-bis(chloromethyl)pyridine with two mole equivalents of the appropriate pyrazole. These ligands were reacted with NiCl2, NiBr2, FeCl2 or CoCl2 to form the respective complexes. A third ligand design is 2-(chloromethyl)- or 2-(bromomethyl)-6-(pyrazol-1-ylmethyl)pyridine and were prepared by the selective alkylation of 2,6-bis(chloromethyl)pyridine with one mole equivalent of the appropriate pyrazole. These ligands were also reacted with NiCl2, NiBr2, FeCl2 or CoCl2 to form the respective complexes. Characterisation of all compounds was done by a range of spectroscopic techniques as well as X-ray crystallography and elemental analysis. The data showed good fit to the proposed structures and in a few cases were confirmed by X-Ray crystallography. All complexes were tested as catalysts for ethylene and higher olefin oligomerisation and showed good activity. The production of alkenes were confirmed in toluene and hexane, however, due to the use of EtAlCl2 and toluene the oligomers were alkylated to form the Friedel-Crafts alkylation products. Similar alkylation was observed for the higher olefin reactions. In comparison, the same reactions in hexane resulted in only C4, C6 and C8 oligomers. When higher olefin reactions were also conducted in hexane, polymeric solids were observed.

A reforma do metano é um processo de grande interesse industrial para a produção de hidrogênio e de gás de síntese. Entre as reações de reforma do metano, destacam-se as reações de reforma a vapor e a reação com dióxido de carbono. O catalisador comumente utilizado nos processos e Ni/Al2O3. Porém, durante este processo, ocorre uma indesejada formação de depósitos carbonáceos na superfície do catalisador, os quais levam a sua destruição mecânica e, consequentemente, sua desativação. Por isso, uma das propriedades mais importantes de um bom catalisador para as reações de reforma do metano é a sua resistência a desativação. Entre as propostas para melhorar o desempenho do catalisador encontra-se a incorporação do óxido de cério junto ao suporte alumina. Catalisadores Ni/Al2O3 incorporados em soluções sólidas formadas por CeO2-ZrO2, ZrO2-La2O3 e CeO2-La2O3 foram preparados, caracterizados e submetidos a ensaios catalíticos nas reações de reforma a vapor e com dióxido de carbono e oxidação parcial do metano com objetivo de avaliar o efeito da adição da solução sólida ao suporte. Os suportes foram preparados pelo método da co-precipitação e os catalisadores foram obtidos pelo método de impregnação e calcinados a 500°C. Estes compostos foram caracterizados por Fisissorção de Nitrogênio, Difração de Raios X (DRX), Espectroscopia dispersiva de raios X (EDX), espectroscopia de na região do ultra violeta e do visível (UV-vis-NIR), Redução à Temperatura Programada (RTP), Espectrocopia RAMAN, Espectroscopia fotoeletrônica de Raios X (XPS), Espectroscopia de absorção de Raios X (XAS) e Análise termogravimétrica. Os ensaios catalíticos mostraram que a adição de solução sólida melhorou o desempenho do catalisador Ni/Al2O3 e, dentre todos os catalisadores avaliados, os melhores desempenhos obtidos foram com os catalisadores suportados em Ni/CeO2-La2O3-Al2O3. / Nowadays, the methane reforming is large interest industrial for the take advantage of these gas in production the hydrogen and synthesis gas (syngas). Among in the reactions of methane stand of the reactions steam reforming and carbon dioxide reforming of methane. The main catalysts uses in the methane reforming is Ni/Al2O3. However, the supported-nickel catalyst is susceptible to the deactivation or the destruction by coke deposition. The carbon dissolves in the nickel crystallite and its diffuses through the nickel, leading for formation of the carbon whiskers, which results in fragmentation of the catalyst. Modification of such catalysts, like incorporation of suitable promoters, is desirable to achieve reduction of the methane hydrogenolysis and/or promotion of the carbon gasification. Catalysts 5% Ni/Al2O3 supported on solid solutions formed by ZrO2-CeO2, La2O3 and CeO2-ZrO2-La2O3 were prepared, characterized and evalueted in reactions steam and carbon dioxide refoming and partial oxidation of methane with objetive the value effect loading solution solid in support. The supports were prepared by co-precipitation method and catalysts were prepared by impregnation method and calcined at 500°C. The supports and catalysts were characterized by Nitrogen Adsorption, method -rays diffraction (XRD), X-rays dispersive spectroscopy (XDS), spectroscopy in the region of the ultraviolet and the visible (UV-vis NIR) to and temperature programmed reduction (TPR), RAMAN Spectrocopy, X-ray absorption spectroscopy and Termogravimetric Analysis. After all the catalytic reactions check which the addition of solid solution is beneficial for Ni/Al2O3 catalysts and the best catalysts are Ni/CeO2-La2O3-Al2O3.

Devido a crescente busca por fontes de energia que utilizem combustíveis renováveis, a utilização do biogás (mistura de gases produzida durante a digestão de matéria orgânica) proveniente do tratamento anaeróbio de águas residuárias e esgotos, surge como um processo promissor para a produção de gás de síntese (mistura de H2 e CO), contribuindo para a geração de produtos de maior valor agregado e para o aproveitamento de rejeitos industriais e domésticos. O biogás normalmente é composto de 60-65% de CH4 e 30-35% de CO2 e, de acordo com a composição do biogás, pode-se combinar processos de reforma do metano com CO2 e reforma a vapor do metano de modo a maximizar o consumo do CH4 excedente presente no biogás, para a geração de gás síntese. Catalisadores baratos e eficientes devem ser desenvolvidos para estas aplicações. Este trabalho tem como objetivo o estudo das melhores combinações destas reações em função da composição de alimentação do reator, aliado ao desenvolvimento de catalisadores de níquel, ítrio e alumínio, buscando minimizar a deposição de carbono, que é o principal problema encontrado nestes processos. Os catalisadores foram preparados pela técnica de coprecipitação de óxido de ítrio e alumínio, no qual se impregnou o óxido de níquel. Os catalisadores foram caracterizados por diversas técnicas: EDX, método B.E.T., DRX, RTP, XAS, além dos ensaios catalíticos para as reações de reforma do metano: com CO2, a vapor e oxidativa. Os resultados mostraram que é possível a preparação de catalisadores de níquel suportado em mistura de Y2O3-Al2O3, e que eles são ativos para as reações de reforma do metano. / Due to the considerable growth in the demand for energy sources that use renewable fuels, the use of biogas (a mixture of gases produced during digestion of organic matter) from the anaerobic treatment of wastewater and sewage, appears as a promising process for the production of synthesis gas (mixture of H2 and CO), contributing to the generation of products with higher value and the use of industrial wastes and domestic. Biogas is typically composed of 60-65% of CH4 and 30-35% of CO2 and, according to the composition of biogas, it can combine the reform processes of methane with CO2 and steam reforming of methane to maximize the consumption of CH4 excess present in the biogas to the production of the synthesis gas. Cheap and efficient catalysts must be developed for these applications. This paper aims to study the best combinations of these reactions depending on the feed composition of the reactor, coupled with the development of catalysts of nickel, yttrium and aluminum in order to minimize the carbon deposition, which is the main problem in these processes. The catalysts were prepared by the technique of co-precipitation of yttrium oxide and aluminum, which is impregnated nickel oxide. The catalysts were characterized by different techniques: EDX, BET method, XRD, TPR, XAS, and catalytic tests for methane reforming reactions: CO2, steam and oxidative. The results showed that it is possible to prepare nickel catalysts supported on mixed Y2O3-Al2O3, and they are active for the methane reactions.

A fermentação anaeróbia da matéria orgânica produz uma mistura de gases chamada biogás. Este biogás contém CH4 e CO2 como componentes majoritários. Estes dois compostos são gases de efeito estufa e sua utilização é muito importante do ponto de vista ambiental e econômico. O presente trabalho teve por objetivo produzir gás de síntese (H2/CO), uma matéria prima de alto valor industrial, a partir da reforma oxidativa do biogás com adição de oxigênio (1,5CH4+1,0CO2+0,25O2) sobre catalisadores de NiO-MgO-ZrO2 e NiO-Y2O3-ZrO2. Os catalisadores foram preparados usando o método de polimerização numa única etapa e foi estudada a variação do teor de MgO e de Y2O3 contido nas amostras. Estes materiais foram caracterizados por DRX, RTP, Adsorção-dessorção de N2, XPS, XAS-XANES, MEV e EDX e foram avaliados na reação de reforma oxidativa de um biogás modelo (composição molar:1,5 CH4/1CO2) em presença de oxigênio, a 750&deg;C e 1atm, visando à obtenção de gás de síntese. Os teores de MgO utilizados no sistema NiO/MgO/ZrO2 foram de 0%, 4%, 20%, 40% e 100% em relação ao ZrO2 (os mesmos teores foram utilizados para Y2O3 no sistema NiO/Y2O3/ZrO2) e o teor mássico de Ni foi 20%. As análises de DRX, TPR, XPS confirmaram a formação das soluções sólidas NiO-MgO e MgO-ZrO2 nos catalisadores NiO-MgO-ZrO2, e das soluções sólidas NiO-Y2O3 e Y2O3-ZrO2 nos catalisadores NiO-Y2O3-ZrO2. Estas soluções sólidas juntas, nos correspondentes catalisadores, melhoraram o desempenho catalítico, levando a altos valores de conversão e baixas taxas de deposição de coque. O teor de MgO ótimo foi de 20%mol no sistema NiO/MgO/ZrO2, e de 20% e 40% mol de Y2O3 no sistema NiO/Y2O3/ZrO2. Nos catalisadores NiO-MgO-ZrO2, a solução sólida NiO-MgO favoreceu principalmente a reação de reforma seca do metano (CH4+CO2), enquanto que nos catalisadores NiO-Y2O3-ZrO2 a solução sólida Y2O3-ZrO2 favoreceu principalmente à oxidação parcial do metano (CH4+1/2O2). Os catalisadores Ni20MZ e Ni20YZ apresentaram resultados promissores para a reforma oxidativa de biogás em presença de oxigênio sendo estes catalisadores melhores do que uma amostra comercial de Ni/Al2O3 (20%Ni) testada nas mesmas condições de reação. A razão H2/CO nos produtos das reações sobre os melhores catalisadores foi muito próxima de 1,0; o que permite seu uso direto em diversas reações, como reação de Fischer-Tropsch, síntese direta de dimetil-éter (processo STD) e síntese de formaldeído. / The anaerobic fermentation of the organic material produces a mixture of gases called biogas. This biogas contains CH4 and CO2 as major components. These two compounds are greenhouse gases and their use are very important from the environmental and economic point of view. The present study aimed to produce synthesis gas (H2/CO), a high-value raw material for the chemical industry, from the oxidative reforming of biogas using oxygen (1.5CH4 +1.0CO2+0.25O2) over NiO-MgO-ZrO2 and NiO-Y2O3-ZrO2 catalysts. These catalysts were prepared by the one-step polymerization method. The variation content of MgO and Y2O3 in each catalyst was studied. These materials were characterized by XRD, TPR, adsorption-desorption of N2, XPS, XAS, SEM and EDX; they were evaluated in the oxidative reforming reaction of a model biogas (molar composition: 1.5 CH4/1CO2) in the presence of oxygen at 750 &deg;C and 1atm, aiming to produce synthesis gas.<br /> The content of MgO in the NiO/MgO/ZrO2 system was varied ranging from 0-100% (0%, 4%, 20%, 40% and 100%mol in relation to ZrO2) , the same contents were used for the Y2O3 in the NiO/Y2O3/ZrO2 system. All catalysts had 20% wt of Ni. The XRD, TPR and XPS confirmed the formation of NiO-MgO and the MgO-ZrO2 solid solutions in the NiO-MgO-ZrO2 catalysts; and NiO-Y2O3 and Y2O3-ZrO2 solid solutions in the NiO-Y2O3-ZrO2 catalysts. These solid solutions together, in the corresponding catalysts, inproved the catalytic performance, leading to high conversion rates and low carbon deposition rates. The optimum MgO content was 20mol% for the NiO/MgO/ZrO2 system and 20% and 40mol% of Y2O3 for the NiO/Y2O3/ZrO2 system. In the NiO-MgO-ZrO2 catalysts, the NiO-MgO solid solution promoted primarily the dry reforming reaction of methane (CH4 + CO2), while in the NiO-Y2O3-ZrO2 catalysts, the Y2O3-ZrO2 solid solution primarily favored the partial oxidation of methane (CH4 + 1/2O2). The Ni20MZ and Ni20YZ catalysts showed promising results for the oxidative reforming of biogas in the presence of oxygen; these catalysts being better than a commercial catalysts (Ni/Al2O3; 20%wt Ni) tested under the same reaction conditions. The H2/CO ratio in the reaction products over the best catalysts was very close to 1.0, which allows its direct use in various processes such as Fischer-Tropsch process, Syngas-to-dimethyl-ether process (STD) and in the synthesis of formaldehyde.