This study is a translation of and commentary on an eighteenth-century treatise written by Juan Miguel Urtasun de Yrarraga. Its purpose is to contribute to the field of knowledge of eighteenth-century Spanish materials, making an original work of that era accessible to the reader unfamiliar with the Spanish language.

An extremely facile and novel method called spontaneous deposition, to deposit noble metal nanoparticles on a most stable form of carbon (C) i.e. diamond is presented. Nanometer sized particles of such metals as platinum (Pt), palladium (Pd), gold (Au), copper (Cu) and silver (Ag) could be deposited on boron-doped (B-doped) polycrystalline diamond films grown on silicon (Si) substrates, by simply immersing the diamond/Si sample in hydrofluoric acid (HF) solution containing ions of the corresponding metal. The electrons for the reduction of metal ions came from the Si back substrate. The diamond/Si interfacial ohmic contact was of paramount importance to the observation of the spontaneous deposition process. The metal/diamond (M/C) surfaces were investigated using Raman spectroscopy, scanning electron microscopy (SEM), x-ray photoelectron spectroscopy (XPS) and x-ray diffractometry (XRD). The morphology (i.e. size and distribution) of metal nanoparticles deposits could be controlled by adjusting the metal ion concentration, HF concentration and deposition time. XRD data indicate the presence of textured and strained crystal lattices of Pd for different Pd/C morphologies, which seem to influence the electrocatalytic oxidation of formaldehyde (HCHO). The sensitivity of electrocatalytic reactions to surface crystal structure implies that M/C could be fabricated for specific electrocatalytic applications. The research also presents electroplating of Cu on ruthenium (Ru), which a priori is a promising barrier material for Cu interconnects in the sub 0.13 μm generation integrated circuits (ICs). Cu plates on Ru with over 90% efficiency. The electrochemical nucleation and growth studies using the potentiostatic current transient method showed a predominantly progressive nucleation of Cu on Ru. This was also supported by SEM imaging, which showed that continuous thin films of Cu (ca. 400 Å) with excellent conformity could be plated over Ru without dendrite formation. Scotch tape peel tests and SEM on Cu/Ru samples both at room temperature (RT) and after annealing at 800 oC, showed no sign of delamination of the Cu film from Ru indicating strong adhesion. XRD patterns from Cu/Ru samples at RT through 800 oC indicated Cu in its characteristic face centered cubic (fcc) form with (111) phase dominating. Most importantly no new XRD peak emerged, even after annealing to 800 oC showing Cu and Ru did not interact much. The excellent adhesion and lack of metallurgical interactions between Cu and Ru underscored the potential application of Ru as a new Cu diffusion barrier in the next generation ICs.

Mémoire numérisé par la Division de la gestion de documents et des archives de l'Université de Montréal. / Pour respecter les droits d'auteur, la version électronique de cette thèse ou ce mémoire a été dépouillée, le cas échéant, de ses documents visuels et audio-visuels. La version intégrale de la thèse ou du mémoire a été déposée au Service de la gestion des documents et des archives de l'Université de Montréal.

The advent of nanoscience and nanotechnology has sparked many research forefronts in the creation of materials with control over size, shape, composition, and surface properties.1,2 However, for most of the applications, nanoscale materials need to be assembled into functional nanostructures that exhibit useful and controllable physical properties. Therefore, numerous efforts on the assembly of nanoparticles (NPs) using organic ligands, polymers and polyelectrolytes have been reported.3,4 However, the interactions between NPs are mediated by intervening ligands, which are detrimental to charge transport and limit the thermal stability. Hence, developing a new method to produce solid state nanostructures with direct NP linkage has become a significant challenge. To avoid the bridging ligands and improve the conductivity of NP based solid state structures, a novel strategy has been developed in which colloidal NPs undergo condensation to wet “jello-like” hydrogel with direct interfacial linkage. Then hydrogels can be dried supercritically to produce aerogels.5 Resultant nanostructures exhibit low densities, large open interconnected pores, and high internal surface areas and are containing entirely of colloidal metal NPs.6 Since noble metal NPs have been widely used in applications such as catalysts, sensors, and novel electrochemical device components, we herein expanded the sol-gel method to noble metal NPs to produce a new class of metal aerogels. In the dissertation, the synthesis of hollow Ag hollow NPs, Au/Ag alloy NPs, and Au/Pt/Ag alloy hollow NPs with tunable sizes and physical properties, and their oxidative-assembly into high-surface-area, mesoporous, self-supported gel framework has been achieved. The gelation kinetics have been controlled by tuning the oxidant/thiolate molar ratio that governs the rate of NP condensation, which in turn determines the morphology, optical transparency, surface area, and porosity of the gel frameworks. These low-density mesoporous nano-architectures displaying optical transparency or opacity, enormously surface area, and interconnected meso-to-macro pore structure are promising candidates for catalytic, electrocatalytic, and SERS-based sensing applications. The SERS activity of Au/Ag alloy aerogels has been studied and significant signal enhancement was achieved. The performance of the Au/Pt/Ag aerogel towards methanol oxidation reaction has been studied via cyclic voltammetry and significant electro-catalytic activity was observed.

Mémoire numérisé par la Direction des bibliothèques de l'Université de Montréal.

Este trabalho descreve a construção e testes de um calorímetro eletromagnético de criptônio liquido utilizando uma geometria projetiva na forma de acordeom para os absorvedores eletrodos. Testes do calorímetro com feixes de elétrons de energia entre 20 e 200 GeV, realizados na linha de feixe H4 do acelerador SPS do CERN, apontam para uma resolução em energia de 5.63/(E[GeV] )0.26)% e uma não linearidade integral máxima de +/- 0,3%. O calorímetro é dividido longitudinalmente em 3 seções, sendo a primeira altamente segmentada transversalmente em uma direção, formando um pre-shower integrado ao calorímetro. A posição de incidência da partícula no calorímetro pode ser determinada com uma resolução de 2.16/(E[GeV] )0,19 7.93 / E[GeV])mm no pre-shower e o ângulo de incidência da partícula (utilizando a informação de posição das outras seções) com uma resolução de (32.01/(E[GeV] ) 0.95 44 /E[GeV])mrad. Os sinais do calorímetro permitem a realização de medidas de tempo com uma resolução de 290ps com elétrons de 120 GeV. Também são apresentados e discutidos o efeito da presença de material inativo na resolução em energia, a resposta do calorímetro a múons e os resultados da comparação entre simulações de Monte Carlo com medidas feitas com feixes de partículas. Por fim, é feito um estudo comparativo da resolução em energia obtida com este calorímetro e com um calorímetro de argônio liquido de geometria semelhante. / This work describes the construction and tests of a liquid krypton electromagnetic calorimeter employing an accordion shaped projective geometry for the absorbers and electrodes. The tests of the calorimeter using electron beams of energy ranging from 20 to 200 GeV and a muon beam of 225 GeV, from the H4 beam line of the CERN SPS, showed an energy resolution of 5,63/(E[GeV] ) 0.26)% and a maximum integral non-linearity of +/- 0.3%. the calorimeter is divided longitudinally in 3 sections, the first one being highly segmented on the transversal direction, operating as a pre-shower integrated on the calorimeter. The position of incidence for a particle in the calorimeter can be determined with a resolution of (2.16/E[GeV] 0.19 7.93 /E[GeV])mm on the pre-shower and the angle of incidence (using the position information from all sections) with a resolution of (32.01/E[GeV] 0.95 44 /E[GeV])mrad. The calorimeter signal allow timing measurements to be performed with a resolution of 290ps for 120 GeV electrons. It is also presented and discussed the energy resolution behavior in the presence of dead material in front of the calorimeter, the calorimeter response to muons and the comparison between the results from data and Monte Carlo calculations. Finally, it is presented a comparative study between the energy resolution of this calorimeter and a liquid argon calorimeter employing a similar accordion shaped geometry.

Dentre os principais avanços na área de ciência ou tecnologia dos materiais podemos ressaltar as atuais técnicas de produção, manipulação e análise de estruturas de tamanho muito reduzido, os quais possuem propriedades físicas (magnéticas, eletrônicas e óticas) diferentes das apresentadas pelos mesmos materiais em estruturas maiores. Nanopartículas (NPs) de metais nobres, principalmente ouro e prata, estão sendo utilizadas e incorporadas em diversas tecnologias que tiram proveito de suas características óticas ou condutivas Neste trabalho apresentamos uma metodologia de preparação de NPs de metais nobres, com a possibilidade de incorporá-las em um material dielétrico. As amostras, produzidas a partir da técnica de agregação gasosa, foram preparadas em um gerador de NPs, construído em um dos canhões de um sistema de magnetron sputtering comercial (AJA Internacional). No gerador, átomos são removidos do alvo e termalizados pelo fluxo do gás de trabalho, se condensando na forma de NPs. As NPs são extraídas do gerador aerodinamicamente e seguem em direção ao substrato. Utilizando um dos outros canhões do nosso sistema de sputtering podemos codepositar as NPs produzidas em uma matriz dielétrica ou metálica. Podemos também depositar camadas de filmes finos sobre o material produzido pelo gerador de NPs. As amostras de nanopartículas de ouro e prata produzidas foram caracterizadas a partir de técnicas de microscopia eletrônica de varredura (MEV), retroespalhamento Rutheford (RBS), espectrofotometria de UV-Visível e microscopia ótica em campo próximo (SNOM). A partir das imagens de MEV, podemos inferir a presença da matriz dielétrica a partir da separação das NPs e essa presença pode ser confirmada pela análise dos resultados de RBS. Por fim a análise do espectro de absorbância das amostras em conjunto com as imagens de SNOM demonstrou o comportamento plasmônico das amostras produzidas, sobretudo das NPs codepositadas em matriz dielétrica. / In the midst of main advances in material science and technology we can highlight the new techniques of preparation, manipulation and analyses of structures of very small size. They have physical properties (magnetic, electronic and optical) different from those presented by the same material, but in bigger dimension. Noble metal nanoparticles, mainly gold and silver, are incorporated into various technologies in order to take advantage of their optical or electric properties. In this work, we present a technique to produce noble metal nanoparticles by a physical method that also permits to imbed them in a dielectric material matrix. The samples, produced using the gas aggregation technique, were prepared in a nanoparticle gun, developed on one of the guns of a commercial magnetron sputtering system (AJA International). In the nanoparticles generator, atoms are removed from the target and thermalized by the flow of the sputtering working gas, and they are also condensed to form the nanoparticles. The nanoparticles are extracted from the generator aerodynamically and then they proceed to the substrate. Using another gun of the sputtering system we can deposit the nanoparticles produced in a dielectric or metallic matrix. We can also deposit under and capping layers of thin films on the nanoparticles layer produced. The samples of gold and silver nanoparticles produced were characterized by scanning electron microscopy (SEM), Rutherford backscattering analysis (RBS), UV-Visible spectrophotometry and near field optical microscopy (SNOM). In the SEM images, from the distribution and morphology of the nanoparticles it was possible infer the presence of the dielectric matrix, and this was also confirmed by the RBS measurements. Finally, absorbance spectrum of the samples together with the SNOM images have demonstrated the plasmonic character of the samples produced, specially for the NPs co-deposited in the dielectric matrix.

Atualmente, a nanociência e nanotecnologia são consideradas como um campo emergente onde, continuamente, as barreiras entre as disciplinas são rompidas. Seu principal foco de estudo consiste em buscar o controle estrutural ao nível molecular, arranjando os átomos de modo a se conseguir um entendimento e controle das propriedades fundamentais da matéria. Neste estudo foram propostas modificações moleculares e, consequentemente, na morfologia, propriedades ópticas e cristalinas em filmes finos de TiO2 com o objetivo de aumentar sua eficiência fotônica. Os filmes finos de TiO2 foram preparados pelo processo sol-gel avaliando a influência de diferentes ácidos e agente direcionador para a obtenção dos arranjos nanoestruturados. A seguir, os filmes que apresentaram maior eficiência fotônica foram incorporados com nanopartículas metálicas (Au, Ag, Pd e Pt) com objetivo de minimizar os processos de recombinação eletrônica do par lacuna/elétron. Das diversas rotas estudadas, os filmes finos de TiO2 preparados com ácido acético obtiveram maior eficiência fotônica devido à pouca aglomeração dos grãos de titânia, o que pode ter favorecido uma maior exposição dos sítios fotocatalíticos. A presença do agente direcionador na formulação teve pouco efeito na eficiência fotônica, possivelmente devido à maior aglomeração dos grãos nos filmes finos de TiO2. Com a adição de nanopartículas metálicas, os filmes finos de TiO2 com nanopartículas de platina e ouro apresentaram maior eficiência fotônica. A presença de hexamina nos filmes finos de TiO2 com nanopartículas metálicas teve pouca influência na eficiência fotônica, exceto com nanopartículas de platina e ouro. A melhora da eficiência fotônica, nestes casos, pode ser atribuída a uma possível diminuição da velocidade de recombinação do par lacuna/elétron. Dessa forma, com o presente trabalho pôde-se comprovar a grande influência das condições de preparação do TiO2 nas propriedades ópticas, morfológicas e na eficiência fotônica. Futuramente, com o maior entendimento do mecanismo desta influência poder-se-ão delinear de forma mais precisas a morfologia e eficiência fotônica destes filmes finos de TiO2, conforme a aplicação a qual serão destinados. / Currently, nanoscience and nanotechnology are considered an emerging field and continuously breaking the barrier among various disciplines. The main focus of study involves controlling structures at molecular level, arranging the atoms in order to achieve an understanding and controlling the fundamental properties of matter. In this study, molecular changes on the basis of morphology, optical and crystalline properties of TiO2 thin films in order to increase their photon efficiency were proposed. The TiO2 thin films were prepared by solgel process evaluating the influence of different acids and templates to obtain the nanostructured arrangements. Then, metal nanoparticles like Au, Ag, Pd and Pt were incorporated on TiO2 thin films. This incorporation might minimize the electron-hole recombination, so it could improve the photon efficiency. From the several routes studied, the TiO2 thin films prepared with acetic acid showed the best performance by the reason of low agglomeration of TiO2 grains, which favors the exposure of the photoactive sites. The presence of template in the formulation had a slightly effect on photon efficiency, possible due to the higher agglomeration of the grains on the TiO2 thin films. The addition of Pt and Au nanoparticles on TiO2 thin films showed superior photon efficiency. The TiO2 thin films with hexamine and metallic nanoparticles did not show the improvement on photon efficiency except for Pt and Au nanoparticles. On these situations, the improvement on photon efficiency is might be due to a possible decrease at the electron-hole recombinations velocity. Thus, the present work demonstrates the great influence of preparation conditions on the optical, morphological properties and the photon efficiency. In the future, with greater understanding of the mechanism of this influence, the properties of TiO2 thin films will be able tailoring depending on the application.

Made available in DSpace on 2015-03-04T21:02:09Z (GMT). No. of bitstreams: 0 Previous issue date: 27 / Coordenação de Aperfeiçoamento de Pessoal de Nível Superior / Propomo-nos a apresentar nesta pesquisa uma exposição acerca da moral preconizada por Nietzsche. Nietzsche faz uma profunda crítica à moral ocidental platônico-judaico-cristã, pois, segundo ele, o ocidente vive uma moral castradora, que oprime as forças instintivas e naturais da vida. Esta é a moral dos fracos, dos ressentidos, uma moral que impede o homem de alcançar o seu desenvolvimento pleno e realizar ao máximo suas potencialidades. Em contrapartida, Nietzsche apresenta a moral que expressa o otimismo pelas forças vitais do homem, forças essas que animam e impelem-no a alçar o supremo brilho e potência próprios do homem. Em torno dessa concepção procuramos apresentar em que aspectos a moral ocidental oprime a expansão da vida? Qual é a origem do estado depressivo e da fraqueza de vontade que estão presentes em nossa cultura? Apontando como possível resposta a indicação nietzscheana de que a decadência do ocidente está na repressão das forças instintos e naturais do homem; por outro lado, buscamos explora

This thesis analyses a growing metropolitan British fascination with northern Scandinavia and Scotland towards the end of the eighteenth century. These two northern regions underwent a dramatic transformation, from being places people avoided to being realms writers considered worthy of visiting, observing and narrating. This thesis examines the importance of the primitivist discourse of northern noble savagery in that transformation. While encounters with the ‘noble savage’ were largely associated with the extra-European world, the fascination with the north was in observing Europe’s very own native examples of the breed. The Highlanders and Islanders of Scotland and the northern Scandinavians, the Sami people in particular, were often romanticised in this context. Despite the Sami being celebrated in British fiction and natural-history works at the time, there has been, in contrast with Scandinavia’s ‘Vikings’, little scholarly attention given to them in a British context. The origin and function of the northern-noble-savage discourse is anchorerd in naturalhistory texts. This study emphasises the importance of the Swedish botanist Carl Linnaeus (1707-1778), who travelled in Lapland in 1732, in constructing idealised depictions of the Sami. Linnaeus also provided a model of domestic exploration in which naturalists produced inventories of regions and their inhabitants previously relatively unmapped by the state. Although the image of the northern savage often bore little resemblance to reality, it had real application and effect. Such imagery allowed allegedly backward regions to be incorporated into the national narrative, and through this the national community sought to benefit from these peripheries and their communities. The thesis also studies the consequences of actual encounters between metropolitan observers and the local populations of these northern regions. The travelogues of the celebrated natural historian and traveller Edward Daniel Clarke (1769-1822), who sojourned in Scotland and Scandinavia in 1797-1799, is the focus of the investigation. In a comparative analysis of his Scottish and Scandinavian accounts, this study presents Clarke as an ambivalent primitivist who both praised and condemned the Highlanders and Sami. Clarke was, for example, critical of what he regarded as the superstitious beliefs of both peoples. His narrative on the Highlanders was, however, far more positive than that on the Sami because of Clarke's adherence to racial classifications, which paradoxically Linnaeus had instigated, which demoted the Sami to mere savages. After Clarke’s death in 1822, attitudes towards the Highlanders and Sami continued to diverge against a backdrop of increased racialisation in British thought. While the Highlander became firmly integrated into a British narrative, the Sami was displaced by growing interest in a Scandinavian invader of Britain, the Viking, whose image went on to provide a robust challenge to the romanticisation of the Celtic Highlander in the century that followed. Meanwhile, the optimism over the Highlands’ economic prospects that had permeated the Linnaean project of exploration in Scotland was now gone. Whereas the idealised gaze of the eighteenth-century explorer had surveyed Highland history in order to chart a course to the future, the focus of the nineteenth-century tourist tended to be firmly on the past.