Electromagnetic interference (EMI) is one of the most common problems encountered in microwave applications. Interaction of electromagnetic (EM) waves from different sources may result in device malfunction due to misinterpretation of the transferred data or information loss. On the other hand, development of materials with reduced radar detectability is desired in defense applications. Considering the limitations in weight and thickness, development of lightweight structural materials with enhanced electromagnetic absorption potential is needed. In this study, development and characterization of glass fiber-reinforced polymer (GFRP) composite materials to be used in EM wave absorbing or EMI shielding applications was aimed. Incorporation of electromagnetic wave absorption characteristic has been achieved by the application of conductive thin film on fiber glass woven fabric reinforcement layers. Characterization of EM wave absorption potential was conducted using &ldquo / free-space method&rdquo / in 18 &ndash / 27 GHz frequency range. Single and multilayered combinations of surface-modified fiber glass woven fabrics were characterized in terms of their EM wave interaction properties and design principles for efficient broadband EM wave absorbing multilayered GFRP composite material have been presented. A computer aided computation method has also developed in order to predict EM wave transmission, reflection, and hence absorption characteristics of multilayered structures from single layer properties. Estimated results were verified compared to free-space measurement results. In the current study, up to 85% electromagnetic wave absorption has been obtained within 18-27 GHz frequency range (K band). Enhancement of EM wave absorption potential of multilayer structure has also been demonstrated by computer aided computation.

Made available in DSpace on 2014-12-17T14:58:15Z (GMT). No. of bitstreams: 1 JoseHBL_DISSERT_PARCIAL.pdf: 2505963 bytes, checksum: 1b82ec8a8147b2b7e13d0af6880855f0 (MD5) Previous issue date: 2012-05-02 / Conselho Nacional de Desenvolvimento Cient?fico e Tecnol?gico / Materials denominated technical textiles can be defined as structures designed and developed with function to fulfill specific functional requirements of various industrial sectors as are the cases of the automotive and aerospace industries. In this aspect the technical textiles are distinguished from conventional textile materials, in which the aesthetic and of comfort needs are of primordial importance. Based on these considerations, the subject of this dissertation was established having as its main focus the study of development of textile structures from aramid and glass fibers and acting in order to develop the manufacture of composite materials that combine properties of two different structures, manufactured in an identical operation, where each structure contributes to improving the properties of the resulting composite material. Therefore were created in laboratory scale, textile structures with low weight and different composition: aramid (100%), glass (100%) and aramid /glass (65/35%), in order to use them as a reinforcing element in composite materials with polyester matrix. These composites were tested in tension and its fracture surface, evaluated by MEV. Based on the analysis of mechanical properties of the developed composites, the efficiency of the structures prepared as reinforcing element were testified by reason of that the resistance values of the composites are far superior to the polyester matrix. It was also observed that hybridization in tissue structure was efficient, since the best results obtained were for hybrid composites, where strength to the rupture was similar to the steel 1020, reaching values on the order of 340 MPa / Os materiais denominados t?xteis t?cnicos podem ser definidos como estruturas projetadas e desenvolvidas com a fun??o de atender a requisitos funcionais espec?ficos de diversos setores da ind?stria, caso da ind?stria automotiva e aeroespacial. Nesse aspecto, distinguem-se dos materiais t?xteis convencionais, nos quais as necessidades est?ticas e de conforto t?m import?ncia primordial. Com base nessas considera??es, o tema dessa disserta??o foi estabelecido tendo como enfoque principal o estudo do desenvolvimento de estruturas t?xteis a partir de fibras de aramida e de vidro, atuando no sentido de elaborar a fabrica??o de materiais comp?sitos que combinem propriedades de duas estruturas diferentes, fabricadas em uma mesma opera??o, onde cada estrutura contribui para melhoria das propriedades do material comp?sito resultante. Para tanto foram desenvolvidas em escala laboratorial estruturas t?xteis de baixa gramatura e composi??o diferenciada de aramida (100%), vidro (100%) e aramida/vidro (65/35%) para utiliza??o como elemento refor?ante em comp?sitos com matriz de poli?ster. Os comp?sitos produzidos foram ensaiados em tra??o e sua superf?cie de fratura avaliada por MEV. Com base nas analises das propriedades mec?nicas dos comp?sitos desenvolvidos, observou-se a efici?ncia das estruturas ou elaboradas como elemento refor?ante tendo em vista que os valores de resist?ncia dos comp?sitos foram muito superiores ? matriz de poli?ster. Tamb?m foi observado que a hibridiza??o na estrutura dos tecidos foi eficiente, uma vez que os melhores resultados obtidos foram para os comp?sitos h?bridos, onde a resist?ncia na ruptura foi semelhante ? do a?o 1020, atingindo valores na ordem de 340 MPa

Die Entwicklung von Geweben mit gestreckten Fadenlagen ist Gegenstand aktueller Forschungen, die vielfach Sondermaschinen für ganz spezielle Anwendungen hervorbringen. Eine systematische Analyse und Optimierung der unter Berücksichtigung der Verbundeigenschaften existiert nach bekanntem Stand des Wissens nicht. Ziel der Dissertation ist es, diese Lücke zu schließen und einen Beitrag zur Etablierung von Geweben mit gestreckten Fadenlagen in Faserverbundwerkstoffen zu leisten. Die Arbeit basiert zum Teil auf den Ergebnissen, die in der Zeit von 2006 – 2012 am Institut für Textilmaschinen und textile Hochleistungswerkstofftechnik der Technischen Universität Dresden im Rahmen verschiedener AiF und DFG Vorhaben entstanden sind. Weiterführende Überlegungen wurden 2015 – 2017 im Rahmen eines Promotionsstudiums an der Professur für Textile Technologien der Technischen Universität Chemnitz angefertigt. Wie anhand konkreter Ausführungsbeispiele gezeigt wird, stößt das Weben insbesondere für Anwendungen im Faserverbundleichtbau an technologisch bedingte Grenzen. Es erfolgt zunächst eine Gegenüberstellung konventioneller Flächenbildungsverfahren und der Anforderungen seitens der Endanwender, insbesondere aus dem Bereich der Verbundwerkstoffindustrie, gleichermaßen. Daraus wird ein Anforderungsprofil für ein anforderungsgerechtes Flächenbildungsverfahren abgeleitet und konstruktive Lösungsvorschläge zu dessen Umsetzung aufgezeigt. / The development of non-crimped-fabrics (NCF) is subject of current research activities. These often led to special machines for very special applications. There is no systematic analysis and optimization of the properties of composites based on the state of the art. The aim of this dissertation is to close this gap and to contribute to the establishment of woven NCF in fiber-reinforced composites. The work is based partially on the results obtained at the Institut für Textilmaschinen und textile Hochleistungswerkstofftechnik der Technischen Universität Dresden from 2006 to 2012 within the framework of various AiF and DFG projects. Further reflections were made between 2015 and 2017 as part of a doctoral study at the Chair of Textile Technologien der Technischen Universität Chemnitz. As shown from examples of the design, weaving is reaching technological limits, especially for applications in composite construction. First of all, conventional surface formation methods are compared with the requirements of end users, especially from the composites industry. From this, a requirement profile is derived for a requirements-based surface formation process and constructive proposals for solutions for its implementation are identified.

La démarche expérimentale menée dans cette thèse a eu comme objectif l'étude des facteurs qui influent l'efficacité de collecte des médias non-tissés chargés par décharge couronne, utilisés pour la filtration de l'air. Les recherches se sont focalisées sur les techniques faisant appel à la décharge couronne en configuration fil-plan et en configuration triode (électrode duale + grille + plan de masse). L'étude s'est déroulée en trois phases : (1) mise au point de dispositifs expérimentaux pour générer la décharge couronne et mesurer le potentiel électrique à la surface des échantillons chargés ; (2) caractérisation de l'état de charge des médias ; (3) évaluation de l'efficacité de collecte, en corrélation avec les résultats des mesures de charge. La distribution de charges a été plus homogène en configuration triode et le niveau de charge a été meilleur en polarité positive. Le déplacement de l'échantillon dans la zone de décharge électrique permet de mieux uniformiser la distribution de la charge. L'augmentation du courant de décharge et du potentiel de grille permet d'amplifier le niveau de charge des médias, suite à l'intensification du champ électrique moyen entre l'électrode active et le plan de masse (en configuration fil – plan), ou entre la grille et le plan de masse (en configuration triode). L'efficacité de la collecte est meilleure si la charge est uniformément déposée, sous l'action d'un champ électrique plus intense. Elle est plus élevée pour les configurations dites « multicouches » où la captation des particules est améliorée par l'association de plusieurs mécanismes physiques, mettant en jeux des forces électriques et mécaniques. / The experimental approach undertaken in this thesis was aimed at the study of the factors affecting the collection efficiency of nonwoven media charged by corona discharge, used for air filtration. Research was focused on techniques using the corona discharge generated by wire-plane and triode configurations (dual electrode + grid + ground plane). The study was conducted in three phases: (1) development of experimental devices to generate corona discharge and measure the electrical potential on the surface of charged samples; (2) characterization of the electrostatic charge state of the media; (3) evaluation of the collection efficiency, correlated with the results of charge measurements. The charge distribution was more homogeneous in triode configuration and the charge level was higher in positive polarity. The sample movement in the electric discharge zone allowed for more uniform distribution of the charge. The increase of the discharge current and gate voltage amplifies the charge level of the media, due to the intensification of the average electric field between the active electrode and the ground plane (configuration wire - plane) or between the gate and the ground plane (in triode configuration). The collection efficiency is better when the charge is uniformly deposited, under the action of a strong electric field. It is higher for the so-called "multi-layer" configurations where the capture of the particles is improved by the combination of several physical mechanisms, involving electrical and mechanical forces.

El presente proyecto de investigación se centra en la reducción de la generación de productos defectuosos mediante el uso de la metodología Lean Six Sigma. En primer lugar, se iniciará con el diagnóstico de la situación actual de la empresa en estudio donde se identifica que el FPY se encuentra con el valor de 88.08% del año en estudio, esto representa un total de 11.92% de desperdicio. La investigación contempla el uso de los pasos DMAIC, para poder atender las causas relacionadas al problema; la primera etapa es definir y consiste en la elaboración del Project Charter y del diagrama SIPOC para la caracterización del proceso Extrusión; como segunda etapa es medir y se emplean los histogramas para determinar la distribución de los rechazos, seguidamente se validará el sistema de medición. La etapa de analizar está enfocada a los resultados obtenidos y también se aplicará el FMEA para poder identificar y controlar los riesgos del proceso, en la etapa siguiente se aplicará las herramientas 5S y DOE. Como última etapa se emplearán cartas de control y la elaboración de procedimientos y actividades para la estandarización. Posterior a la implementación, se estima una disminución del índice desperdicio de 11.92% a 10.72%, dicho beneficio se reflejará en un impacto positivo sobre las ventas. De esta forma, las herramientas implementadas y los resultados conseguidos referidos en el artículo pueden servir de punto de partida a nuevos investigadores que desean aumentar la productividad en las empresas del sector. / This research project focuses on reducing the generation of defective products through Lean Six Sigma methodology. At first place, it will begin with the diagnosis of the current situation of the company under study, where FPY KPI is at 88.08% of the year under study, this represents a total of 11.92% of total waste. The investigation contemplates usage of DMAIC steps, to be able to attend the causes related to the problem; The first stage is to define and consists of the elaboration of the Project Charter and the SIPOC diagram for the characterization of the Extrusion process; as a second stage is to measure and histograms are used to determine the distribution of rejections, then measurement system will be validated. The analyze stage is focused on the results obtained and FMEA will also be applied to identify and control the risks of the process, in the next stage the 5S and DOE tools will be applied. As a last stage, control charts and the development of procedures and activities for standardization will be used. After implementation, a decrease in the waste rate is estimated from 11.92% to 10.72%, this benefit will be reflected in a positive impact on sales. In this way, the tools implemented and the results obtained referred in this article can serve as a starting point for new researchers who want to increase productivity in companies in the sector. / Trabajo de Suficiencia Profesional

No description available.

Die Entwicklung von Geweben mit gestreckten Fadenlagen ist Gegenstand aktueller Forschungen, die vielfach Sondermaschinen für ganz spezielle Anwendungen hervorbringen. Eine systematische Analyse und Optimierung der unter Berücksichtigung der Verbundeigenschaften existiert nach bekanntem Stand des Wissens nicht. Ziel der Dissertation ist es, diese Lücke zu schließen und einen Beitrag zur Etablierung von Geweben mit gestreckten Fadenlagen in Faserverbundwerkstoffen zu leisten. Die Arbeit basiert zum Teil auf den Ergebnissen, die in der Zeit von 2006 – 2012 am Institut für Textilmaschinen und textile Hochleistungswerkstofftechnik der Technischen Universität Dresden im Rahmen verschiedener AiF und DFG Vorhaben entstanden sind. Weiterführende Überlegungen wurden 2015 – 2017 im Rahmen eines Promotionsstudiums an der Professur für Textile Technologien der Technischen Universität Chemnitz angefertigt. Wie anhand konkreter Ausführungsbeispiele gezeigt wird, stößt das Weben insbesondere für Anwendungen im Faserverbundleichtbau an technologisch bedingte Grenzen. Es erfolgt zunächst eine Gegenüberstellung konventioneller Flächenbildungsverfahren und der Anforderungen seitens der Endanwender, insbesondere aus dem Bereich der Verbundwerkstoffindustrie, gleichermaßen. Daraus wird ein Anforderungsprofil für ein anforderungsgerechtes Flächenbildungsverfahren abgeleitet und konstruktive Lösungsvorschläge zu dessen Umsetzung aufgezeigt. / The development of non-crimped-fabrics (NCF) is subject of current research activities. These often led to special machines for very special applications. There is no systematic analysis and optimization of the properties of composites based on the state of the art. The aim of this dissertation is to close this gap and to contribute to the establishment of woven NCF in fiber-reinforced composites. The work is based partially on the results obtained at the Institut für Textilmaschinen und textile Hochleistungswerkstofftechnik der Technischen Universität Dresden from 2006 to 2012 within the framework of various AiF and DFG projects. Further reflections were made between 2015 and 2017 as part of a doctoral study at the Chair of Textile Technologien der Technischen Universität Chemnitz. As shown from examples of the design, weaving is reaching technological limits, especially for applications in composite construction. First of all, conventional surface formation methods are compared with the requirements of end users, especially from the composites industry. From this, a requirement profile is derived for a requirements-based surface formation process and constructive proposals for solutions for its implementation are identified.

Three-dimensional (3D) profiled woven fabrics with varying cross-sections along the component parts are needed in a number of industrial applications. One of the main advantages of the ribbon loom weaving technique is the ability to produce highly diverse structures with open or closed edges. The realization of 3D profiled woven fabrics that satisfy the requirements is directly connected to the ability to process high-performance fibers in the weft direction. The processing of high-performance yarns in the weft direction with low fiber damage will open new application areas for shuttle weaving machines. By employing modified mechanical loom elements, the variety of producible structures can be increased significantly.

Au cours des dernières décennies, le développement de nouveaux matériaux a progressé pour les applications liées à la mécanique. De nouvelles générations de composites ont été développées, qui peut offrir des avantages par rapport aux tapis unidirectionnels renforcés de fibres couramment utilisés les matériaux prennent alors le nom de woven fabrics. Le comportement de ce matériau est fortement influencé par la micro-structure du matériau. Dans la thèse, les modèles mécaniques et les schémas numériques capables de modéliser les comportement des tissus et des matériaux de réseau généraux ont été développés. Le modèle prend en compte la micro-structure au moyen d'une technique d'homogénéisation. Les fibres dans le réseau ont été traités comme des micro-poutres, ayant une rigidité à la fois en extension et en flexion, avec différents types de connexions. La procédure développée a été appliquée pour obtenir les modèles mécaniques homogénéisés pour certains types de réseaux de fibres biaxiaux et quadriaxiaux, simulant soit des réseaux de fibres (en ce cas a été supposé parmi les fibres) ou des tissus avec une interaction négligeable entre les faisceaux de fibres et en empêchant tout glissement relatif (dans ce cas, les connexions ont été simulés au moyen de pivots). Différentes géométries ont été analysées, y compris la cas dans lesquels les fibres ne sont pas orthogonales. On obtient généralement un premier milieu à gradient mais, dans certains cas, la procédure d'homogénéisation lui-même indique qu'un continuum d'ordre supérieur est mieux adapté pour représenter la déformation de la micro-structure. Des résultats spéciaux ont été obtenus dans le cas de fibres reliées par pivots. Dans ce cas, un matériau orthotrope à module de cisaillement nul a été obtenu. Un tel matériau a un tenseur constitutif elliptique, il peut donc conduire à des concentrations de contrainte. Cependant, il a été montré que certaines considérations sur le comportement physique de tels réseaux indiqué que les termes d'ordre supérieur inclus dans l'expansion des forces internes et des déformations, de sorte qu'un matériau de gradient de déformation a été obtenu. Les résultats obtenus peuvent être utilisés pour la conception de matériaux spécifiques nécessitant des propriétés. Bien que le modèle de référence soit un matériau de réseau, les résultats obtenus peuvent être appliqué à d'autres types similaires de microstructures, comme des matériaux pantographiques, des micro-dispositifs composé de micro-poutres, etc. Ils étaient limités à la gamme d'élasticité linéaire, qui est petite déformation et comportement élastique linéaire. Ensuite, les simulations numériques ont été axées sur les tests d'extension et les tests de biais. Le obtenu configurations déformées sont conformes aux tests expérimentaux de la littérature, tant pour tissus équilibrés et non équilibrés. De plus, une comparaison entre les premier et deuxième gradients des prédictions numériques ont été effectuées. Il a été observé que les prédictions de deuxième gradient mieux simuler les preuves expérimentales. / In the past decades there has been an impressive progress in the development of new materials for mechanical related applications. New generations of composites have been developed, that can offer advantages over the unidirectional fibre-reinforced mats commonly used then materials take the name of woven fabrics. The behaviour of this material is strongly influenced by the micro-structure of the material. In the thesis mechanical models and a numerical scheme able to model the mechanical behaviour of woven fabrics and general network materials have been developed. The model takes in to account the micro-structure by means of a homogenization technique. The fibres in the network have been treated like microbeams, having both extensional and bending stiffness, with different types of connection, according to the pattern and detail of the network. The developed procedure was applied for obtaining the homogenized mechanical models for some types of biaxial and quadriaxial networks of fibres, simulating either fibre nets (in this case rigid connection were assumed among the fibres) or tissues with negligible interaction between the fibre bundles, and with relative sliding prevented (in this case the connections were simulated by means of pivots). Different geometries were analysed, including the cases in which the fibres are not orthogonal. A first gradient medium is usually obtained but, in some cases, the homogenization procedure itself indicates that a higher order continuum is better fit to represent the deformation of the micro-structure. Special results were obtained for the case of fibres connected by pivots. In this cases an orthotropic material with zero shear modulus was obtained. Such a material has a not elliptic constitutive tensor, thus it can lead to strain concentrations. However, it was shown that some considerations about the physical behaviour of such networks indicated that higher order terms had to be included in the expansion of the internal forces and deformations, so that a strain gradient material was obtained. The results obtained can be used for the design of specific materials requiring ad-hoc properties. Although the reference model is a network material, the results obtained can be applied to other similar kinds of microstructures, like pantographic materials, micro devices composed by microbeams etc. They have been limited at the range of linear elasticity, that is small deformation and linear elastic behaviour. Then, numerical simulations were focused on extension tests and bias tests. The obtained deformed configurations are consistent with the literature experimental tests, both for balanced and unbalanced tissues. Moreover, a comparison between first and second gradient numerical predictions was performed. It was observed that second gradient predictions better simulate the experimental evidences.