No description available.

Electrochemical supercapacitors (ESs) are currently under development for electronics and automotive applications due to their hybrid properties inherited from batteries and capacitors. ESs exhibit higher power densities than batteries and energy densities than capacitors, and offer long cyclic life and rapid charge-discharge suitable for many applications. A promising candidate of electrode materials is manganese dioxide (MnO2), which has the advantages of high theoretical capacitance, low cost and environmentally friendly. However, the low electronic and ionic conductivities of MnO2 have limited its performance for practical applications. It has been demonstrated in literature that composite materials, which consist of conductive additives such as multi-walled carbon nanotubes (MWCNTs) and MnO2 can address this problem, however further investigations are required to produce ESs with superior performance for real-world applications. In this dissertation, novel colloidal fabrication techniques have been developed and advanced dispersants were employed to fabricate advanced nanocomposite electrodes. MnO2-MWCNTs composite electrode was fabricated with use of multifunctional dispersant. The multifunctional dispersant cetylpyridinium chloride (CPC) showed good dispersion of MWCNTs and capability of forming complex with the precursor of MnO2, which improved the homogeneity of the composite and generated unique morphology. The MnO2-MWCNTs composite electrode fabricated exhibited remarkable areal capacitance at high active mass loadings. New scalable fabrication technique was developed for MnO2-MWCNTs by using high solubility sodium permanganate (NaMnO4) precursor. The fabricated composite electrode showed superior performance compared to electrodes fabricated by other colloidal techniques at similar mass loading. Liquid-liquid extraction was employed to address the problem of particles agglomeration upon drying. Bio-inspired advanced extractor lauryl gallate (LG) was used for liquid-liquid extraction of particles. LG has organic catechol group allowed for strong adsorption on inorganic particles. Using LG as an advanced extractor has facilitated the transfer of particles from aqueous to organic phase to prevent agglomeration associated with drying procedure and improved mixing with MWCNTs. Advanced dispersants from bile acid salts and charged aromatic dyes families such as sodium taurodeoxychloate (TDS) and tolonium chloride (TL) were used as MWCNTs dispersants, to fabricate composite electrode with alternative metal oxides such as Mn3O4 and V2O3. Furthermore, 3,4-dihydroxybenzaldhyde (DHB) was investigated as a dispersing agent for Mn3O4 and used to fabricate Mn3O4-MWCNTs composite electrode with TL by Schiff base formation. Mn3O4 offers the advantages of small particle size compared to MnO2, and can be converted to MnO2 by electrochemical cycling to enhance capacitive performance. V2O3 was considered as an alternative to MnO2 due to its metallic conductivity at room temperature. An activation procedure has been developed, which promoted the formation of capacitive V2O5 surface layer on conductive V2O3 to increase capacitance. The advanced dispersants have shown excellent dispersion of MWCNTs in aqueous solutions at low concentrations and facilitated the formation of homogeneous composite with Mn3O4 and V2O3. Activation procedures were developed for the Mn3O4 and V2O3 composite electrodes, and the electrodes with high active mass loadings showed exceptional performance after activation. / Thesis / Doctor of Philosophy (PhD) / In modern society, the demand for clean and renewable energy have grown drastically and there is a need in development of advanced energy storage devices. Currently, the most common energy storage devices are batteries or conventional capacitors. Batteries can store a large amount of energy, however they are limited by their low power performance. Capacitors can charge and discharge rapidly, but the amount of energy stored is relatively low. Other than batteries and capacitor, electrochemical supercapacitors are emerging energy storage devices that offer the advantages of high power and energy density, fast charge-discharge and long lifetime. The objective of this work was to develop advanced nanocomposite electrode materials for electrochemical supercapacitor applications. New colloidal processing strategies have been developed and advanced dispersants were employed for the fabrication of high performance nanocomposites for electrochemical supercapacitor applications. The results presented in this work showed exceptional performances compared to literature data and paved a new way for further developments.

In this thesis we used atomic force microscopy (AFM) to investigate systematically the behaviour of both electrostatically stabilised silica and sterically stabilised polystyrene (PS) colloidal systems on freshly cleaved mica substrates. For the silica colloidal nanoparticles we explored the effect of colloidal suspension concentration, particle size, and different application techniques on both the adsorption behaviour and subsequent structuring of the particles. For the PS colloidal nanoparticles we explored concentration effects and experimented with both dip-coating and droplet application techniques. We showed that silica nanoparticles adsorbed onto mica via irreversible adsorption that possessed lateral mobility due to the weak attraction between the nanoparticles and the substrate, facilitating subsequent capillary structuring of the nanoparticles during drying. We associated the effects of volume fraction with Debye screening, and kinetics effects with particle size and volume fraction. We also successfully imaged a partially dried film and showed the role of convective/capillary forces in the structuring of the nanoparticles. Studies with variations in particle size generated a number of different topography structures; with dewetting phenomena observed for 10 nm nanoparticles and the formation of crystalline structures for 100 nm nanoparticles. Spin coating techniques were used to produce even larger crystalline structures of nanoparticles. Size dependent ordering occurred for low concentration samples due to the polydispersity of the colloidal suspension. We showed that acceleration can affect interparticle spacing. We also studied the role of rotational speed on the crystallinity of the particle configurations and showed how fine tuning of rotational speed can generate large scale monolayer crystalline formations of nanoparticles.

No description available.

No description available.

Orientador: Edvaldo Sabadini, Fred Yukio Fujiwara / Tese (doutorado) - Universidade Estadual de Campinas, Instituto de Química / Made available in DSpace on 2018-08-19T09:00:39Z (GMT). No. of bitstreams: 1 Egidio_FernandadoCarmo_D.pdf: 2263055 bytes, checksum: 940b47bd50de20f4597683b091bd3faf (MD5) Previous issue date: 2011 / Resumo: O modelo de dois sítios, utilizado nos estudos de relaxação do solvente em soluções de carboidratos, pode ser transposto de forma satisfatória para soluções de polímeros hidrofílicos. Polímeros que possuem hidrogênios lábeis, isto é, que possuem hidrogênios disponíveis para troca química com os hidrogênios da água, causam aumento da taxa de relaxação spin-spin do solvente, R2, em relação ao valor obtido para a água pura O efeito torna-se mais intenso na medida em que a concentração dos polímeros aumenta. Polímeros que não possuem hidrogênios lábeis não alteram significativamente o R2 do solvente, pois o mecanismo de troca química não é estabelecido. A relaxação do solvente pode ser usada para estudar o processo de transição sol-gel em sistemas poliméricos. Conforme o gel e formado, as moléculas de água começam a ser confinadas e a taxa de relaxação do solvente aumenta significativamente. A estrutura de hidrogéis supramoleculares formados entre PEG e a-CD, a qual possui uma cavidade hidrofóbica em relação ao seu exterior hidrofílico, dependem das concentrações de seus constituintes e da massa molar do polímero. Quanto maior a massa molar do polímero, menor o numero de pontos de reticulação e mais frágil será o hidrogel. A partir da entrada de 2 moléculas de a-CD em uma cadeia de PEG linear 1.470 Da, a complexação torna-se mais intensa, levando ao recobrimento de toda a cadeia polimérica. A cinética de gelação entre a-CD e PEG, estudada por medidas do tempo de relaxação spin-spin (T2 = 1/R2) do solvente, fornece um perfil de curva que pode explicar o processo de complexação e formação do gel como um todo. A liberação e o confinamento de moléculas de água são refletidos no tempo de relaxação spin-spin destas. Ao liberar moléculas de água, observa-se uma diminuição nos valores de R2 da água até um ponto mínimo, a partir do qual os valores começam a aumentar devido ao confinamento destas moléculas / Abstract: The two sites model used in the studies of solvent relaxation in carbohydrate solutions was also applied for hydrophilic polymer solutions. Polymers with labile hydrogen atoms, meaning they have hydrogen available for chemical exchange with the hydrogen atoms of water, increase the solvent spin-spin relaxation rate, R2, relative to the pure water. The effect becomes more intense as the polymer concentration increases. Polymers without labile hydrogen do not affect significantly R2 of the solvent, because the chemical exchange mechanism is not established in this case. The solvent relaxation can be used to study the process of sol-gel transition in polymer systems. When the gel is formed, the water molecules become confined and the solvent relaxation rate increases significantly. The structure of supramolecular hydrogels formed from PEG and a-CD, which has a hydrophobic cavity and exterior hydrophilic, depends on the concentration of the constituents and the molar mass of the polymer. The higher is the molar mass of the polymer, the fewer is the crosslinking points and more the fragile is hydrogel. Since the inclusion of two a-CD molecules in a chain of linear PEG 1470 Da, the complexation becomes more intense, leading to the full inclusion complex. The kinetics of hydrogel formation between a-CD and PEG was studied by relaxation time measurements of the spin-spin (T2 = 1/R2) of the solvent, provides a curve, whose shape can used to explain the process of complexation and the gelation process at all. The release and confinement of water molecules of the gel are affect spin-spin relaxation the time of the water molecules. The releasing of the water molecules, results in the decreasing of R2 up to a minimum value, and beyond this point the values increases again, due to confinement of these molecules / Doutorado / Físico-Química / Doutor em Ciências

京都大学 / 新制・課程博士 / 博士(工学) / 甲第23232号 / 工博第4876号 / 新制||工||1761(附属図書館) / 京都大学大学院工学研究科化学工学専攻 / (主査)教授 宮原 稔, 教授 松坂 修二, 教授 山本 量一 / 学位規則第4条第1項該当 / Doctor of Philosophy (Engineering) / Kyoto University / DGAM

‘Soft condensed matter’ is a newly-emerged sub-discipline of physics concerned with the study of systems that are mechanically soft such as colloids, emulsions, surfactants, polymers, liquid crystals, granular media and various biomaterials including DNA and proteins. These materials display a broad range of interesting microstructures and phase behaviours and have a myriad of applications in the materials, food, paint and cosmetic industries as well as medical technologies. Soft condensed matter physics presents new opportunities and challenges for the development of new ideas and concepts in experimental and theoretical physics alike. Because the field overlaps with many different disciplines, the study of soft matter also offers promising developments to other fields of science including chemistry, chemical engineering, materials science, biology, and environmental science. The behaviour of these systems is dominated by one simple fact: they contain mesoscopic structures in the size range 10 nm to 1 µm that are held together by weak entropic forces. The elastic constants of these materials are 109 times smaller than the conventional atomic materials and hence are easily deformable by external stresses, electric or magnetic fields, or even by thermal fluctuations. We have studied two important classes of soft matter systems in this thesis -colloidal suspensions and surfactant systems. The thesis is divided into two main themes: (a) Effects of electric field on the colloidal suspensions, and (b) Effects of shear on surfactant solutions. Motions of colloidal particles under the influence of applied electric field were observed under a microscope and were studied using image analysis and particle tracking. We have also used tracking of thermal fluctuations of colloidal particles embedded in surfactant gels to study microrheology of surfactant solutions. Linear and non-linear rheology of aqueous solutions of cationic cetyltrimethyl ammonium bromide (CTAB) and anionic sodium-3-hydroxynapthalene-2-carboxylate (SHNC) were studied using bulk rheology in a commercial rheometer. Rheological studies of an anionic surfactant sodium dodecyl sulphate (SDS) in the presence of strongly binding counterion p-toluidine hydrochloride (PTHC) has also been done. Chapter 1 starts with a general introduction to soft condensed matter systems and then we proceed to describe two specific class of soft condensed materials which we have studied in this thesis -colloidal suspensions and surfactant/water systems. After describing different types of colloids, we discuss why colloids are suitable as model systems in condensed matter physics. This is followed by a discussion on the chemical structure, phase behaviour and self assembling properties of surfactant molecules in water. We then discuss the inter-macromolecular forces such as van der Waals interaction, the screened Coulomb repulsion, hydrogen bond, hydrophobic and hydration forces and steric repulsion which are the major players in the interaction in soft condensed matter systems. The systems that have been the subject of our experimental studies, viz. polystyrene colloidal suspensions, CTAB+SHNC, SDS+PTHC and CTAT have also been discussed in detail. Then we have given an overview of effects of electric field on the colloidal suspensions. Two types of geometries have been discussed: one in which the field is parallel to the plates and another when the field is perpendicular to the electrodes. Application of colloidal particles in diagnostic tests (Latex Agglutination Tests) has been discussed after this. Some methods used to enhance the sensitivity of LATs have also been reviewed. This is followed by a theoretical background of linear and non-linear rheology. We have also given an introduction to digital video microscopy, its advantages and discussed few quantities like pair correlation function, structure factor which can be extracted using digital video microscopy and particle tracking. The concluding part of this chapter describes the organization of this thesis. Chapter 2 discusses the experimental apparatus and techniques used in our studies. We describe our setup for applying the electric field to the colloidal particles and imaging and tracking their motion. We also discuss the image processing and analyzing methods for extracting the useful quantities from the digitized images. We have described the various components of the MCR-300 stress-controlled rheometer (Paar Physica, Germany) and the AR-1000N stress-controlled rheometer (T. A. Instruments, U. K.) followed by different experimental geometries that we have used for our experiments. Next we have described the various experiments that can be done using a commercial rheometer. Calculation of surface charge of colloidal particles using a conductivity meter has been demonstrated for our colloidal particle suspensions. We also describe the sample preparation methods employed in different experiments. In Chapter 3, we have discussed our study of clustering of colloidal particles under the influence of an ac electric field as a function of frequency. The field was applied in a direction perpendicular to the confining walls. Two regimes are observed, a low frequency regime where the clusters are isotropic with a local triangular order and a new high-frequency regime where the clusters are highly elongated (anisotropic) with no local order. The crossover from one regime to the other occurs at a critical frequency, fc. The formation of elongated clusters seen at high frequencies is explained in terms of rotation of particles due to a phase lag between the polarization of the electric double layer around a particle and the applied electric field that arises because of inhomogeneities of the conducting surface. We have also observed that the threshold field for the cluster formation, Eth, increases with frequency in both the regimes. We did these studies on two different sizes of particles and found that both Eth and fc were lower for the larger particles. Our model based on particle rotation was able to estimate the value of fc correctly for both the sizes of the particles. Chapter 4 describes a method employing an ac electric field applied perpendicular to the confining walls to increase the sensitivity of recognition of ligands by their corresponding receptors grafted on Brownian latex particles. Application of electric field assists the colloidal micro-particles grafted with receptors to come nearer due to electro-hydrodynamic drag. This increase in the local concentration of the latex particles results in improving the chances of ligand-receptor interaction leading to the aggregation of the latex particles. With this technique we have been able to increase the sensitivity of the ligand-receptor recognition by a factor as large as 50. We have demonstrated the utility of our method using streptavidin as the model receptor and biotinylated RNase A as the model ligand. We have also applied our technique to a commercially available kit for rheumatoid factor (RF) with successful results. The same method was also successfully applied for the detection of typhoid whose antibodies were purified and attached to polystyrene particles by our collaborators from DRDE Gwalior. In Chapter 5, we have studied the statics and dynamics of colloidal particles at different applied electric fields from zero to beyond the threshold field. We have taken a series of time-lapsed images and calculated out the pair-correlation function, mean squared displacement, structure factor, non-Gaussian parameter etc. We have studied both mono-dispersed colloidal system and binary colloidal system (mixture of two different sizes of particles). The aggregates formed in the two cases were analysed with the help of Voronoi polygons to quantify the microscopic structure. In mono-dispersed system, the aggregates formed were two-dimensional hexagonal crystals and we have used this system to study the freezing transition in 2-dimension. The properties of the system in the liquid and the crystalline state satisfy various criteria for the 2-d freezing transition. The first maximum of the structure factor at the voltage at which freezing occurs, is 5.5 as has been suggested for the 2-d freezing. This is reflected in the dynamics of the system also, where the ratio D/D0 falls below 10%, in accordance with the LPS (L¨owen, Palberg, Simon) criterion for freezing in 2-d colloidal systems [Phys. Rev. Lett. 70, 1557 (1993)]. However, in the binary colloidal system the clusters formed were not crystalline but more like 2-d dense liquids. A closer inspection of these clusters reveals that the motion of a smaller subset of particles is cooperative and follows string-like paths. The mean square displacement of such a system shows a plateau in the intermediate times which indicates the “caging” of particles by its neighbours. A peak in non-gaussian parameter indicates the presence of dynamical heterogeneities in the system. In Chapter 6, we have described the use of multiple particle tracking to study the microrheology of semidilute solutions of wormlike micelles and compared the results with those from macrorheology experiments done on the same samples. Two concentrations of CTAT (1.3% and 2%) were used. We observed that, in spite of the mesh size being much smaller than the size of the probe particles, the viscoelastic response function calculated using the one-point microrheology does not match with that measured from macrorheology. This can be attributed to the fact that there is another important length scale in the system, the mean micellar length, and it is comparable to the probe particle size. Two-point microrheology was successful in verifying the macrorheology results for CTAT 1.3% but it fails to do so for CTAT 2%. We attribute this to the fact that in a higher viscosity sample (2%), the hydrodynamic force propagate to a lesser distance, thereby limiting the measurable correlation between the particles and precluding the success of two-point microrheology. Chapter 7 describes a rheological study of aqueous solutions of varying concentration of cationic cetyltrimethyl ammonium bromide (CTAB) and anionic sodium-3-hydroxynapthalene-2-carboxylate (SHNC) kept at a fixed molar concentration ratio [CTAB]/[SHNC] = 2. At this molar ratio, the surfactants self-assemble into wormlike micelles which get entangled above the overlap concentration to form viscoelastic gel. The range of the total surfactant concentration φ varies from 1.17% to 5.16% by weight. We found that, plateau modulus, G0, shows a power law dependence on the surfactant concentration, φ, with an exponent 3, which is higher than the expected value of 2.25 observed for the one-component wormlike micelles. Zero shear viscosity, η0, and relaxation time, τR show a maximum at the surfactant concentration, φmax = 1.9% in contrast to a monotonic increase with φ. We propose that this non-monotonic behaviour is due to the unusual dependence of the average micellar length L ¯on φ, showing a maximum in average micellar length L at φmax. This argument provides a strong support to the model of micellar growth in the presence of electrostatic interactions developed by Mackintosh et. al [Europhys. Lett. 12, 697 (1990)]. The presence of electrostatic interactions also appears in the behaviour of the plateau modulus G0 that exhibits a larger φ dependence than in highly screened micelles. In the non-linear flow experiments, a minimum observed in critical shear rate (the shear rate at which shear thinning starts), ˙γc, at φmax strengthens our arguments. In Chapter 8, we describe the phase behaviour and rheology of SDS+PTHC (sodium dodecyl sulphate + p-toluidine hydrochloride) micellar solutions at different molar ratios α=[PTHC]/[SDS]) of the two components. At low values of α, polarizing microscopy observations reveal a transition from an isotropic to a nematic phase of disk-like micelles, whereas a transition to a lamellar phase occurs at higher α values > 0.5, on increasing the surfactant content. Linear rheology of the isotropic micellar solution reveal a viscous behaviour over a large range of surfactant concentrations. Surprisingly, this also extends to the nematic phase of disk-like micelles observed at α =0.2 and φ =0.35. These systems also exhibit a viscoelastic behaviour over a narrow range of surfactant concentration as reported in earlier studies. The extent of the viscoelastic region of the isotropic micellar solution also decreases with increase in α. Frequency sweep curves in this region, scaled on to a master curve is reminiscent of dilute suspensions of hard spheres or rigid Brownian rods. Consistent with the results from oscillatory shear measurements, the f;ow behaviour examined under steady shear is Newtonian over a large range of surfactant content in the isotropic micellar solution. An interesting result in these studies is the non-monotonic behaviour of the viscosity with increase in surfactant concentration. It is likely that the sharp rise in viscosity arises from a jamming effect of the rigid rods. Dynamic light scattering studies suggest that the drop in viscosity is due to the decrease in the length of the micellar aggregates. This is followed by a change in the morphology of the micelles from rods to disks as indicated by the transition to a nematic phase of disk-like micelles or a lamellar phase. A change in the morphology of micellar aggregates with increase in α is expected in mixed surfactant systems with strongly binding counterions. However, the surprising result is the change in morphology of the micellar aggregates with surfactant content. Such a behaviour is seen in mixed surfactant systems for the first time. The thesis concludes with a summary of our main results and a brief discussion of the scope of future work in Chapter 9.

Doctor of Philosophy / Department of Physics / Christopher M. Sorensen / Nano-size materials are new materials in an intermediate state between the bulk and atomic or molecular states. Nanoparticles in colloidal solution and their assemblies have the great attention of researchers to investigate the novel fundamental properties and numerous applications. In this dissertation, we investigated the solubility phase transition behavior of gold nanoparticles in colloidal solution. We used the nearly monodisperse gold nanoparticles synthesized by either the inverse micelle or the solvated metal atom dispersion methods followed by digestive ripening. The gold nanoparticles were ligated with alkyl chains, which were dodecanethiol, decanethiol, or octanethiol for individual samples. They dispersed in toluene or t-butyl toluene like large molecules at room temperature. In analogy to molecular solutions, the colloidal solution had thermally reversible phase transitions between a dissolved phase of dispersed single nanoparticles and dispersed-aggregation co-existing phase. A more polar solvent, 2-butanone, was added to the colloidal solution for changing the solubility of gold nanoparticles and adjusting the phase transition temperatures to accessible temperatures. Superclusters formed by the nanoparticles when the colloidal solutions were quenched from a one-phase regime at high temperature to a two-phase regime at low temperature. Solubility phase diagrams were obtained for gold nanoparticles with different ligands in the mixtures of different ratios of 2-butanone and toluene or t-butyl toluene. The explanation from classical ideal solution theory gave the fusion enthalpy of superclusters. Temperature quenches from the one-phase to the two-phase regime yielded superclusters of the nanoparticle solid phase with sizes that depended on the quench depth. Classical nucleation theory was used to describe these sizes using a relative small value of the surface tension for the nanoparticle solid phase. This value is consistent with molecule size scaling of the surface tension. In total these results show that the solubility behavior of nanoparticles in colloidal solution is similar to the behavior in molecular solutions.

Current study of separation mechanism in chromatography heavily relies on the measurement of macroscopic properties, such as retention time and peak width. This dissertation describes the vibrational spectroscopy characterization of separation processes.Raman Spectroscopic characterization of a silica-based, strong anion exchange stationary phase in concentrated aqueous solutions is presented. Spectral response of stationary phase quaternary amine is closely related to changes in interaction between counter anions and the amine functional groups as the result of anion hydration. The molecular-level information obtained will provide useful guidance for control of stationary phase selectivity.To study the effects of stationary phase pore size on separations processes, monodisperse silica particles in the sub-100 nm range are prepared and self-assembled to well-ordered, three-dimensional colloidal arrays. A modified LaMer model is proposed and demonstrated for optimization of reaction conditions that lead to uniform and spherical silica particles. This approach greatly reduces the number of training experiments required for optimization. Fast Fourier transformation of colloidal array scanning electron microscopy images indicates closely-packed hexagonal packing patterns.Using these arrays, a novel system for the measurement of molecular diffusion coefficients in nanopores is reported. This system consists of an ordered colloidal array with well-defined pore structure deposited onto an internal reflection element for in-sit collection of kinetic information by attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR). A mathematical model is established to extract diffusion coefficients from these data. A decrease of approximately eight orders of magnitude in molecular diffusion coefficients is observed for molecular transport in nanopores.Finally, by using this colloidal array-ATR-FTIR system and the corresponding mathematical models that describe absorption in the colloidal array, the distribution in the nanopores of the acetonitrile organic modifier in an aqueous mobile phase solvent system is determined. Based on the results of 50 nm colloidal arrays, pore surface properties have a strong effect on the distribution of organic molecules from bulk solution to the pores.