Structural health monitoring (SHM) systems is a relatively new discipline, studying the structural condition of buildings and other constructions. Current SHM systems are either wired or wireless, with a relatively high cost and low accuracy. This thesis exploits a blend of digital signal processing methodologies, for structural health monitoring (SHM) and develops a wireless SHM system in order to provide a low cost implementation yet reliable and robust. Existing technologies of wired and wireless sensor network platforms with high sensitivity accelerometers are combined, in order to create a system for monitoring the structural characteristics of buildings very economically and functionally, so that it can be easily implemented at low cost in buildings. Well-known and established statistical time series methods are applied to SHM data collected from real concrete structures subjected to earthquake excitation and their strong and weak points are investigated. The necessity to combine parametric and non-parametric approaches is justified and to this direction novel and improved digital signal processing techniques and indexes are applied to vibration data recordings, in order to eliminate noise and reveal structural properties and characteristics of the buildings under study, that deteriorate due to environmental, seismic or anthropogenic impact. A characteristic and potential harming specific case study is presented, where consequences to structures due to a strong earthquake of magnitude 6.4 M are investigated. Furthermore, is introduced a seismic influence profile of the buildings under study related to the seismic sources that exist in the broad region of study.

<p>This thesis explores the use of nonlinear crystals from theKTiOPO₄(KTP) family with the aim to extend the possibleapplications for laser sources and to gain more knowledge aboutthe material’s benefits and limits. The work focussed onoptical parametric oscillators (OPOs) and optical parametricamplifiers (OPAs), which employ second order nonlinearprocesses. Both devices transfer energy from a laser beam at aparticular wavelength to a different wavelength, which istuneable. In OPOs two new beams at different wavelengths aregenerated, whereas in OPAs an existing weak beam is amplified.The essential part of these devices, which enables theoccurrence of the energy conversion, is a nonlinear crystal. Inthis work the ferroelectric crystals KTP and RbTiOPO₄(RTP) have been utilized.</p><p>By modifying the material’s structure,quasi-phasematching can be obtained, which is a crucialrequirement for achieving efficient energy conversion betweenthe incident and the generated waves. The fabrication ofquasi-phasematched crystals is dependent on the controlledreversion of the material’s spontaneous polarisation,which is accomplished by periodic electric field poling.</p><p>Nanosecond pulses of more than 200 kW were generated in the“eye-safe”region by employing a double pass OPA.Small signal gains exceeding 75 dB were obtained for anessentially diffraction limited beamwithout spectralbroadening of the seed. By subsequent signal coupling intofibres substantial broadening was accomplished. A systematicmeasurement series of several RTP crystals allowed us toaccurately determine the wavelength and temperature dispersionof the refractive index, which are two essential requirementsfor further employment of this material. The OPOs based on RTPwere widely tuneable by controlling the temperature. It wasalso concluded that RTP behaves similar to KTP in parametricdevices, thus being a material, which can sustain high powers,possesses large nonlinear coefficients and can operate in abroad wavelength region.Efficient Raman oscillation concurrent with parametricoscillation was observed and analysed in several KTP samples.This gave further insight into the processes taking placeinside the material when performing as a frequency converter,if the generated idler lies in the absorption band.This thesis also covers the investigation of afemtosecond optical parametric chirped pulse amplifier.Temporally stretched seed pulses were amplified to 85 µJ,resulting in a gain above 60 dB, and subsequent recompressionresulted in 270 fs pulses.</p><p><b>Keywords:</b>nonlinear optics, KTiOPO₄, optical parametric oscillator, optical parametricamplifier, RbTiOPO₄, quasi-phasematching, electric field poling,stimulated Raman scattering.</p>

A estimação e previsão da volatilidade de ativos são de suma importância para os mercados financeiros. Temas como risco e incerteza na teoria econômica incentivaram a procura por métodos capazes de modelar a variância condicional que evolui ao longo do tempo. O objetivo central desta dissertação foi modelar via modelos ARCH – GARCH e modelos aditivos o índice do IBOVESPA e o ativo PETR4 para analisar a existência de correlação entre as volatilidades estimadas. A estimação da volatilidade dos ativos no método paramétrico foi realizada via modelos EGARCH; já para o método não paramétrico, utilizouse os modelos aditivos com 5 defasagens. / Volatility estimation and forecasting are very important matters for the financial markets. Themes like risk and uncertainty in modern economic theory have encouraged the search for methods that allow for modeling of time varying variances. The main objective of this dissertation was estimate through GARCH models and additive models of IBOVESPA and PETR4 assets; and analyzes the existence of correlation between volatilities estimated. We use EGARCH models to estimate through parametric methods and use additive models 5 to estimate non parametric methods.

Das Nutzen von 3D-Anmerkungselementen unter PTC Creo-Parametric ermöglicht die Erstellung von 3D-CAD-Modellen mit ausführlichen Informationen zu Funktion, Tolerierung und Fertigung. Dadurch kann der Archivierungs- und Versionspflegeaufwand von Produktdaten und ein besseres, räumliches Verständnis für das Produkt in seiner Entstehungsphase erreicht werden.

We consider the problem of estimating the reliability of bundles constructed of several fibres, given a particular kind of censored data. The bundles consist of several fibres which have their own independent identically dis-tributed failure stresses (i.e.the forces that destroy the fibres). The force applied to a bundle is distributed between the fibres in the bundle, accord-ing to a load-sharing model. A bundle with these properties is an example of a load-sharing system. Ropes constructed of twisted threads, compos-ite materials constructed of parallel carbon fibres, and suspension cables constructed of steel wires are all examples of load-sharing systems. In par-ticular, we consider bundles where load-sharing is described by either the Equal load-sharing model or the more general Local load-sharing model. In order to estimate the cumulative distribution function of failure stresses of bundles, we need some observed data. This data is obtained either by testing bundles or by testing individual fibres. In this thesis, we develop several theoretical testing methods for both fibres and bundles, and related methods of statistical inference. Non-parametric and parametric estimators of the cumulative distribu-tion functions of failure stresses of fibres and bundles are obtained from different kinds of observed data. It is proved that most of these estimators are consistent, and that some are strongly consistent estimators. We show that resampling, in this case random sampling with replacement from sta-tistically independent portions of data, can be used to assess the accuracy of these estimators. Several numerical examples illustrate the behavior of the obtained estimators. These examples suggest that the obtained estimators usually perform well when the number of observations is moderate.

[Truncated abstract] Advanced laser interferometer gravitational wave detectors require an extremely high optical power in order to improve the coupling between the gravitational wave signal and the optical field. This high power requirement leads to new physical phenomena arising from nonlinear interactions associated with radiation pressure. In particular, detectors with multi-kilometer-long arm cavities containing high density optical fields suffer the possibility of 3-mode opto-acoustic interactions. This involves the process where ultrasonic vibrations of the test mass cause the steady state optical modes to scatter. These 3-mode interactions induce transverse optical modes in the arm cavities, which then can provide positive feedback to the acoustic vibrations in the test masses. This may result in the exponential growth of many acoustic mode amplitudes, known as Parametric Instability (PI). This thesis describes research on 3-mode opto-acoustic interactions in advanced interferometric gravitational wave detectors through numerical investigations of these interactions for various interferometer configurations. Detailed analysis reveals the properties of opto-acoustic interactions, and their dependence on the interferometer configuration. This thesis is designed to provide a pathway towards a tool for the analysis of the parametric instabilities in the next generation interferometers. Possible techniques which could be helpful in the design of control schemes to mitigate this undesirable phenomenon are also discussed. The first predictions of parametric instability considered only single interactions involving one transverse mode and one acoustic mode in a simple optical cavity. ... In Chapter 6, I was able to make use of a new analytical model due to Strigin et al., which describes parametric instability in dual recycling interferometers. To make the solution tractable, it was necessary to consider two extreme cases. In the worst case, recycling cavities are assumed to be resonant for all transverse modes, whereas in the best cases, both recycling cavities are anti-resonant for the transverse modes. Results show that, for the worst case, parametric gain values as high as ~1000 can be expected, while in the best case the gain can be as low as ~ 3. The gain is shown to be very sensitive to the precise conditions of the interferometer, emphasising the importance of understanding the behaviour of the detectors when the cavity locking deviates from ideal conditions. Chapter 7 of this thesis contains work on the observation of 3-mode interactions in an optical cavity at Gingin, which confirms the analysis presented here, and also a paper which shows how the problem of 3-mode interactions can be harnessed to create new devices called opto-acoustic parametric amplifiers. In the conclusions in Chapter 8, I discuss the next important steps in understanding parametric interactions in real interferometers – including the need for more automated codes relevant to the design requirements for recycling cavities. In particular, it is pointed out how the modal structure of power and signal recycling cavities must be understood in detail, including the Gouy phase for each transverse mode, to be able to obtain precise predictions of parametric gain. This thesis is organised as a series of papers which are published or have been submitted for publication. Such writing style fills the condition for Ph.D. thesis at the University of Western Australia.

A estimação e previsão da volatilidade de ativos são de suma importância para os mercados financeiros. Temas como risco e incerteza na teoria econômica incentivaram a procura por métodos capazes de modelar a variância condicional que evolui ao longo do tempo. O objetivo central desta dissertação foi modelar via modelos ARCH – GARCH e modelos aditivos o índice do IBOVESPA e o ativo PETR4 para analisar a existência de correlação entre as volatilidades estimadas. A estimação da volatilidade dos ativos no método paramétrico foi realizada via modelos EGARCH; já para o método não paramétrico, utilizouse os modelos aditivos com 5 defasagens. / Volatility estimation and forecasting are very important matters for the financial markets. Themes like risk and uncertainty in modern economic theory have encouraged the search for methods that allow for modeling of time varying variances. The main objective of this dissertation was estimate through GARCH models and additive models of IBOVESPA and PETR4 assets; and analyzes the existence of correlation between volatilities estimated. We use EGARCH models to estimate through parametric methods and use additive models 5 to estimate non parametric methods.

A estimação e previsão da volatilidade de ativos são de suma importância para os mercados financeiros. Temas como risco e incerteza na teoria econômica incentivaram a procura por métodos capazes de modelar a variância condicional que evolui ao longo do tempo. O objetivo central desta dissertação foi modelar via modelos ARCH – GARCH e modelos aditivos o índice do IBOVESPA e o ativo PETR4 para analisar a existência de correlação entre as volatilidades estimadas. A estimação da volatilidade dos ativos no método paramétrico foi realizada via modelos EGARCH; já para o método não paramétrico, utilizouse os modelos aditivos com 5 defasagens. / Volatility estimation and forecasting are very important matters for the financial markets. Themes like risk and uncertainty in modern economic theory have encouraged the search for methods that allow for modeling of time varying variances. The main objective of this dissertation was estimate through GARCH models and additive models of IBOVESPA and PETR4 assets; and analyzes the existence of correlation between volatilities estimated. We use EGARCH models to estimate through parametric methods and use additive models 5 to estimate non parametric methods.

The selection of a suitable model for efficiency analysis is one of the most important issues in policy analysis. Given the recent interest in the use of distance functions as alternative representation of production technology, this study compares the empirical performances of the parametric stochastic input distance function to its nonparametric counterpart, data envelopment analysis. A further comparison is made between the alternatives of a distance and production function frontiers. It further integrates efficiency scores from the consistent approaches in order to evaluate the performance of the sampled farm households and for analysis of policy impacts on technical, allocative and cost efficiency. The usefulness of the proposed methodology is applied to smallholder maize production in Benue State Nigeria. The maize subsector has featured in a number of Nigeria’s policy initiatives, the most current of which involves doubling of its production and productivity through promotion of improved technologies such as hybrid seed, inorganic fertilizer, pesticides, herbicides, and better management practices. Despite the policy initiatives, maize productivity has remained low raising questions about the efficiency of resource use by farmers and the benefits of Nigeria’s technology policy. The study used data obtained from a field survey for the 2008/2009 agricultural year. A multistage stratified sampling technique was employed in selection of respondents. A total of 240 maize farm households were randomly selected and interviewed using structured questionnaires. Results from all the approaches indicated considerable technical, allocative and cost inefficiency under both traditional and improved maize technology. Technical efficiency estimates range from 80 to 87 percent. Allocative efficiency estimates range from 53 to 74 percent while cost efficiency estimates range from 45 to 62 percent. The results from all the approaches indicated that inefficiency in maize production in Benue State is dominated by cost inefficiency suggesting the immense potential of enhancing production through improvement in overall efficiency. The overall consistency check shows that technical, allocative and cost efficiency measures from the three distance functions were consistent whereas similar conclusions could not hold when these were compared to the production frontier especially for technical efficiency estimates. Given the consistency of results from the parametric and non-parametric distance functions, an integrated input distance model was developed for providing final efficiency estimates and analysis of policy impacts. The results show that both traditional and improved technology users were technically, allocatively and cost inefficient. The average technical, allocative and cost efficiency are 84.2, 65.7 and 54.5 percent, respectively implying that there is a possibility of raising maize production by 45.5 percent through overall efficiency improvement. Under the integrated approach, the study revealed that hybrid seeds, inorganic fertilizer and conservation practices have positive and significant impact on farm efficiency. Other determinants of efficiency include education, age, household size, land size, credit, and membership in a farmer group. The findings justify the need for further public investment in maize technology development and proper implementation of the relevant policies in order to enhance the efficiency with which maize has been produced thereby increasing its productivity, food security and farm incomes and subsequently reducing poverty in Nigeria. / Thesis (PhD)--University of Pretoria, 2011. / Agricultural Economics, Extension and Rural Development / unrestricted

This thesis explores the use of nonlinear crystals from theKTiOPO4(KTP) family with the aim to extend the possibleapplications for laser sources and to gain more knowledge aboutthe material’s benefits and limits. The work focussed onoptical parametric oscillators (OPOs) and optical parametricamplifiers (OPAs), which employ second order nonlinearprocesses. Both devices transfer energy from a laser beam at aparticular wavelength to a different wavelength, which istuneable. In OPOs two new beams at different wavelengths aregenerated, whereas in OPAs an existing weak beam is amplified.The essential part of these devices, which enables theoccurrence of the energy conversion, is a nonlinear crystal. Inthis work the ferroelectric crystals KTP and RbTiOPO4(RTP) have been utilized. By modifying the material’s structure,quasi-phasematching can be obtained, which is a crucialrequirement for achieving efficient energy conversion betweenthe incident and the generated waves. The fabrication ofquasi-phasematched crystals is dependent on the controlledreversion of the material’s spontaneous polarisation,which is accomplished by periodic electric field poling. Nanosecond pulses of more than 200 kW were generated in the“eye-safe”region by employing a double pass OPA.Small signal gains exceeding 75 dB were obtained for anessentially diffraction limited beamwithout spectralbroadening of the seed. By subsequent signal coupling intofibres substantial broadening was accomplished. A systematicmeasurement series of several RTP crystals allowed us toaccurately determine the wavelength and temperature dispersionof the refractive index, which are two essential requirementsfor further employment of this material. The OPOs based on RTPwere widely tuneable by controlling the temperature. It wasalso concluded that RTP behaves similar to KTP in parametricdevices, thus being a material, which can sustain high powers,possesses large nonlinear coefficients and can operate in abroad wavelength region.Efficient Raman oscillation concurrent with parametricoscillation was observed and analysed in several KTP samples.This gave further insight into the processes taking placeinside the material when performing as a frequency converter,if the generated idler lies in the absorption band.This thesis also covers the investigation of afemtosecond optical parametric chirped pulse amplifier.Temporally stretched seed pulses were amplified to 85 µJ,resulting in a gain above 60 dB, and subsequent recompressionresulted in 270 fs pulses. <b>Keywords:</b>nonlinear optics, KTiOPO4, optical parametric oscillator, optical parametricamplifier, RbTiOPO4, quasi-phasematching, electric field poling,stimulated Raman scattering. / NR 20140805