Cette thèse a pour objectif l'analyse du système de télévision numérique chinois (DTMB) et l'optimisation de sa fonction d'estimation de canal. Tout d'abord, une analyse approfondie de ce système est effectuée en comparaison du système DVB-T en termes de spécifications, d'efficacité spectrale et de performances. Ensuite, la fonction d'estimation de canal basée sur la séquence pseudo-aléatoire du système est étudiée dans les domaines temporel et fréquentiel, et plusieurs améliorations sont apportées aux méthodes typiques afin de notamment gérer les canaux très dispersifs en temps. Enfin, de nouveaux procédés itératifs aidés par les données et peu complexes sont proposés pour raffiner les estimés de canal. Les fonctions de décodage de canal et d'entrelacement sont exclues de la boucle et des fonctions de filtrage temps/fréquence sont étudiées pour fiabiliser les estimations. Ces nouveaux algorithmes démontrent leur efficacité par rapport aux méthodes courantes de la littérature.

Multiple-input, multiple-output (MIMO) techniques have been proposed to meet the needs for higher data rates and lower delays in future wireless communication systems. The downlink capacity of multiuser MIMO systems is achieved when the system transmits to several users simultaneously. Frequently, many more users request service than the transmitter can simultaneously support. Thus, the transmitter requires a scheduling algorithm for the users, which must balance the goals of increasing throughput, reducing multiuser interference, lowering delays, ensuring fairness and quality of service (QoS), etc. In this thesis, we investigate the application of genetic algorithms (GAs) to perform scheduling in multiuser MIMO systems. GAs are a fast, suboptimal, low-complexity method of solving optimization problems, such as the maximization of a scheduling metric, and can handle arbitrary functions and QoS constraints. We first examine a system that transmits using capacity-achieving dirty paper coding (DPC). Our proposed GA structure both selects users and determines their encoding order for DPC, which affects the rates they receive. Our GA can also schedule users independently on different carriers of a multi-carrier system. We demonstrate that the GA performance is close to that of an optimal exhaustive search, but at a greatly reduced complexity. We further show that the GA convergence time can be significantly reduced by tuning the values of its parameters. While DPC is capacity-achieving, it is also very complex. Thus, we also investigate GA scheduling with two linear precoding schemes, block diagonalization and successive zero-forcing. We compare the complexity and performance of the GA with "greedy" scheduling algorithms, and find the GA is more complex, but performs better at higher signal-to-noise ratios (SNRs) and smaller user pool sizes. Both algorithms are near-optimal, yet much less complex than an exhaustive search. We also propose hybrid greedy-genetic algorithms to gain benefits from both types of algorithms. Lastly, we propose an improved method of optimizing the transmit covariance matrices for successive zero-forcing. Our algorithm significantly improves upon the performance of the existing method at medium to high SNRs, and, unlike the existing method, can maximize a weighted sum rate, which is important for fairness and QoS considerations. / Communications

El món de les comunicacions per la xarxa elèctrica (CXE) pot ser dividit en tres grans tipus: CXE en baix voltatge (CXE-BV), en mig voltatge (CXE-MV) i en alt voltatge (CXE-AV). En aquests últims anys, les CXE-BV han atret una gran expectació, ja que les seves capacitats han fet d'aquesta tecnologia una bona opció com alternativa pel bucle local d'accés i pel desplegament de xarxes d'àrea local, focalitzades aquestes últimes en l'entorn domèstic. A més, les CXE-BV inclouen un conjunt d'aplicacions de baixa velocitat orientades a l'operador, com la lectura automàtica de comptadors (LAC), distribució de càrrega, facturació dinàmica, etc. Per altra banda, les CXE-MV i CXE-AV, històricament lligades a tasques de telecontrol i teleprotecció, s'estan començant a considerar com un canal de comunicacions eficient i fiable. El desenvolupament de sistemes digitals i els esforços d'estandardització estan fent d'aquests canals un medi atractiu per a que els operadors elèctrics ofereixin serveis de comunicacions, ja que no necessiten invertir en infraestructura perquè la xarxa elèctrica ja està desplegada.En aquesta Tesi s'introduiran i es comentaran les particularitats de les tres xarxes elèctriques, després, es mostraran al lector les solucions tecnològiques existents pels canals de BV basats en la norma Europea CENELEC així com pels canals d'AV, mostrant que els sistemes actuals de LAC ofereixen una diversitat freqüencial molt baixa i que els mòdems CXE-AV estan ancorats en estendards antiquats.Aquest treball es mou per les tres topologies de la xarxa, particularment, en aplicacions orientades a la banda CENELEC, en mesura i modelat de canal, i en mesura i disseny del nivell físic per sistemes CXE-BV, CXE-MV i CXE-AV respectivament. Els sistemes actuals que exploten la banda CENELEC ofereixen mecanismes d'explotació de la diversitat freqüencial del canal molt limitats o nuls, donant lloc a una baixa robustesa en front a interferències i soroll de fons acolorit. Aquest treball proposa un esquema de modulació multiportadora que, mantenint una complexitat baixa, ofereix unes altes prestacions permetent un bon nivell d'explotació de la selectivitat freqüencial. Per al que a CXE-MV respecta, aquesta Tesi desenvolupa un model de canal determinístic-estadístic pels anells urbans de distribució de potència i, finalment, en sistemes CXE-AV, aquest treball proposa, basat en mesures de canal i proves de camp, un nivell físic de banda ampla capaç de incrementar la velocitat de comunicació mentre manté una baixa densitat espectral de potència limitant així la interferència a altres sistemes.PARAULES CLAU: Power line communications (PLC), low voltage (LV), medium voltage (MV), high voltage (HV), automatic meter reading (AMR), orthogonal frequency division multiplexing (OFDM), multicarrier spread spectrum (MC-SS), communication system design, channel measurements, channel modeling, scattering parameters. / El mundo de las comunicaciones por la red eléctrica (CRE) puede ser dividido en tres grandes tipos: CRE en bajo voltaje (CRE-BV), en medio voltaje (CRE-MV) y en alto voltaje (CRE-AV). En estos últimos años, las CRE-BV han atraído una gran expectación, ya que sus capacidades han hecho de esta tecnología una buena opción como alternativa para el bucle local de acceso y para el despliegue de redes de área local, focalizadas estas últimas en el entorno doméstico. Además, las CRE-BV incluyen un conjunto de aplicaciones de baja velocidad orientadas al operador como la lectura automática de contadores (LAC), distribución de carga, facturación dinámica, etc. Por otro lado, las CRE-MV y CRE-AV, históricamente ligadas a tareas de telecontrol y teleprotección, se están empezando a considerar como un canal de comunicaciones eficiente y fiable. El desarrollo de sistemas digitales y los esfuerzos de estandarización están haciendo de estos canales un medio atractivo para que los operadores eléctricos ofrezcan servicios de comunicaciones, ya que no necesitan invertir en infraestructura porque la red eléctrica ya está desplegada.En esta Tesis se introducirán y se comentarán las particularidades de las tres redes eléctricas, luego, se mostrarán al lector las soluciones tecnológicas existentes para los canales de BV basados en la norma Europea CENELEC así como para los canales de AV, mostrando que los sistemas actuales de LAC ofrecen una diversidad frecuencial muy baja y que los módems CRE-AV están anclados en estándares anticuados.Este trabajo se mueve por las tres topologías de red, particularmente, en aplicaciones orientadas a la banda CENELEC, en medida y modelado de canal, y en medida y diseño del nivel físico para sistemas CRE-BV, CRE-MV y CRE-AV respectivamente. Los sistemas actuales que explotan la banda CENELEC ofrecen mecanismos de explotación de la diversidad frecuencial del canal muy limitados o nulos, dando lugar a una escasa robustez frente a interferencias y ruido de fondo coloreado. Este trabajo propone un esquema de modulación multiportadora que, manteniendo una complejidad baja, ofrece unas altas prestaciones permitiendo un buen nivel de explotación de la selectividad frecuencial. Por lo que a CRE-MV respecta, esta Tesis desarrolla un modelo de canal determinístico-estadístico para los anillos urbanos de distribución de potencia y, finalmente, en sistemas de CRE-AV, este trabajo propone, basado en medidas de canal y pruebas de campo, un nivel físico de banda ancha capaz de incrementar la velocidad de comunicación mientras mantiene una baja densidad espectral de potencia limitando así la interferencia a otros sistemas.PALABRAS CLAVE: Power line communications (PLC), low voltage (LV), medium voltage (MV), high voltage (HV), automatic meter reading (AMR), orthogonal frequency division multiplexing (OFDM), multicarrier spread spectrum (MC-SS), communication system design, channel measurements, channel modeling, scattering parameters. / The world of Power line communications (PLC) can be divided into three main types: low voltage PLC (LV-PLC), medium voltage PLC (MV-PLC) and high voltage PLC (HV-PLC). These last years, LV-PLC has attracted a great expectation since its wideband capabilities has made this technology a suitable choice for last-mile access and in-home communications. Moreover, LV-PLC also includes a utility oriented low frequency and low speed applications, such as automatic meter reading (AMR), load distribution, dynamic billing and so on. On the other hand, MV-PLC and HV-PLC, historically oriented to teleprotection and telecontrol tasks, are being considered as a reliable communication channel. The development of digital equipment and the standardization efforts are making those channels an attractive medium for electrical utilities telecommunications services, since the network, as well as in LV-PLC, is already deployed. In this PhD dissertation, the three different PLC topologies are reviewed and the different communications techniques in such channels exposed. Then, a deep technological review of existing AMR solutions for the European CENELEC band, as well as HV-PLC systems is given, showing that existing AMR systems deliver low frequency diversity and HV-PLC systems are anchored in old fashioned standards.This work walks around the three topologies, specifically, CENELEC band utility oriented applications, channel measurement and modeling and channel measurement and physical layer design, regarding LV-PLC, MV-PLC and HV-PLC respectively. Existing CENELEC compliant systems deliver low or none frequency diversity mechanisms, yielding in a low robustness against colored noise and interference. This work propose a multicarrier based physical layer approach that, while keeping the complexity low, delivers high performance allowing a great level of frequency diversity. Focusing on MV-PLC, a hybrid deterministic-statistical channel model for urban underground rings is developed and, finally, in HV-PLC systems, this work proposes, based on measurements and field tests, a wideband physical layer in order to increase data rate while keeping low both the power spectral density and possible interference to other systems.KEYWORDS: Power line communications (PLC), low voltage (LV), medium voltage (MV), high voltage (HV), automatic meter reading (AMR), orthogonal frequency division multiplexing (OFDM), multicarrier spread spectrum (MC-SS), communication system design, channel measurements, channel modeling, scattering parameters.

Employing an error control code is one of the techniques to reduce the Peak-to-Average Power Ratio (PAPR) in an Orthogonal Frequency Division Multiplexing system; a well known class of such codes being the cosets of Reed-Muller codes. In this thesis, classes of such coset-codes of arbitrary linear codes are considered. It has been proved that the size of such a code can be doubled with marginal/no increase in the PAPR. Conditions for employing this method iteratively have been enunciated. In fact this method has enabled to get the optimal coset-codes. The PAPR of the coset-codes of the extended codes is obtained from the PAPR of the corresponding coset-codes of the parent code. Utility of a special type of lengthening is established in PAPR studies

This work deals with the design of MT transmit, MR receive antenna MIMO (Multiple Input Multiple Output) communication system where the transmitter performs a linear operation on data. This linear precoding model includes systems which involve signal shaping for achieving higher data rates, uncoded MIMO Multicarrier and Single-Carrier systems and, the more recent, MIMO-OFDM (Orthogonal Frequency Division Multiplexing) systems employing full diversity Space-Frequency codes. The objective of this work is to design diversity centric and rate centric linear precoded MIMO systems whose performance is better than the existing designs. In particular, we consider MIMO-OFDM systems, Zero Padded MIMO systems and MIMO systems with limited rate feedback. Design of full diversity MIMO-OFDM systems of rate symbol per channel use (1 s/ pcu) : In literature, MIMO-OFDM systems exploiting full diversity at a rate of 1 s/ pcu are based on a few specific Space-Frequency (SF)/ Space-Time-Frequency (STF) codes. In this work, we devise a general parameterized framework for the design of MIMO-OFDM systems employing full diversity STF codes of rate 1 s/ pcu. This framework unifies all existing designs and provides tools for the design of new systems with interesting properties and superior performance. Apart from rate and diversity, the parameters of the framework are designed for a low complexity receiver. The parameters of the framework usually depend on the channel characteristics (number of multipath, Delay Profile (DP)). When channel characteristics are available at the transmitter, a procedure to optimize the performance of STF codes is provided. The resulting codes are termed as DP optimized codes. Designs obtained using the optimization are illustrated and their performance is shown to be better than the existing ones. To cater to the scenarios where channel characteristics are not available at the transmitter, a complete characterization of a class of full diversity DP Independent (DPI) STF codes is provided. These codes exploit full diversity on channels with a given number of multipath irrespective of their characteristics. Design of DP optimized STF codes and DPI codes from the same framework highlights the flexibility of the framework. Design of Zero Padded (ZP) MIMO systems : While the MIMO-OFDM transmitter needs to precode data for exploiting channel induced multipath diversity, ZP MIMO systems with ML receivers are shown to exploit multipath diversity without any precoding. However, the receiver complexity of such systems is enormous and hence a study ZP MIMO system with linear receivers is undertaken. Central to this study involves devising low complexity receivers and deriving the diversity gain of linear receivers. Reduced complexity receiver implementations are presented for two classes of precoding schemes. An upper bound on the diversity gain of linear receivers is evaluated for certain precoding schemes. For uncoded systems operating on a channel of length L, this bound is shown to be MRL_MT +1 for uncoded transmissions, i.e, such systems tend to exploit receiver and multipath diversities. On the other hand, MIMO-OFDM systems designed earlier have to trade diversity with receiver complexity. These observations motivate us to use ZP MIMO systems with linear receivers for channels with large delay spread when receiver complexity is at a premium. Design examples highlighting the attractiveness of ZP systems when employed on channels with large delay spread are also presented. Efficient design of MIMO systems with limited feedback : Literature presents a number of works that consider the design of MIMO systems with partial feedback. The works that consider feedback of complete CSI, however, do not provide for an efficient system design. In this work, we consider two schemes, Correlation matrix feedback and Channel information feedback that convey complete CSI to the transmitter. This CSI is perturbed due to various impairments. A perturbation analysis is carried out to study the variations in mutual information for each of the proposed schemes. For ergodic channels, this analysis is used to design a MIMO system with a limited rate feedback. Using a codebook based approach, vector quantizers are designed to minimize the loss in ergodic capacity for each of the proposed schemes. The efficiency of the design stems from the ability to obtain closed-form expression for centroids during the iterative vector quantizer design. The performance of designed vector quantizers compare favorably with the existing designs. The vector quantizer design for channel information feedback is robust in the sense that the same codebook can be used across all operating SNR. Use of vector quantizers for improving the outage performance is also presented.

In this thesis, we focus on interference cancelling (IC) detectors for advanced communication systems. The contents of this thesis is divided into the following four parts: 1. Multiuser interference (MUI) cancellation in uplink orthogonal frequency division multiple access (OFDMA). 2. Inter-carrier interference (ICI) and inter-symbol interference (ISI) cancellation in space-frequency block coded OFDM (SFBC-OFDM). 3. Single-symbol decodability (SSD) of distributed space-time block codes (DSTBC) in partially-coherent cooperative networks with amplify-and-forward protocol at the relays 4. Interference cancellation in cooperative SFBC-OFDM networks with amplify-and-forward (AF) and decode-and-forward (DF) protocols at the relays. In uplink OFDMA systems, MUI occurs due to different carrier frequency offsets of different users at the receiver. In the first part of the thesis, we present a weighted multistage linear parallel interference cancellation approach to mitigate the effect of this MUI in uplink OFDMA. We also present a minimum mean square error (MMSE) based approach to MUI cancellation in uplink OFDMA. We present a recursion to approach the MMSE solution and show structure-wise and performance-wise comparison with other detectors in the literature. Use of SFBC-OFDM signals is advantageous in high-mobility broadband wireless access, where the channel is highly time- as well as frequency-selective because of which the receiver experiences both ISI as well as ICI. In the second part of the thesis, we are concerned with the detection of SFBC-OFDM signals on time- and frequency-selective MIMO channels. Specifically, we propose and evaluate the performance of an interference cancelling receiver for SFBC-OFDM, which alleviates the effects of ISI and ICI in highly time- and frequency-selective channels The benefits of MIMO techniques can be made possible to user nodes having a single transmit antenna through cooperation among different nodes. In the third part of the thesis, we derive a new set of conditions for a distributed DSTBC to be SSD for a partially-coherent relay channel (PCRC), where the relays have only the phase information of the source-to-relay channels. We also establish several properties of SSD codes for PCRC. In the last part of the thesis, we consider cooperative SFBC-OFDM networks with AF and DF protocols at the relays. In cooperative SFBC-OFDM networks that employ DF protocol, i) ISI occurs at the destination due to violation of the `quasi-static' assumption because of the frequency selectivity of the relay-to-destination channels, and ii) ICI occurs due to imperfect carrier synchronization between the relay nodes and the destination, both of which result in error-floors in the bit error performance at the destination. We propose an interference cancellation algorithm for this system at the destination node, and show that the proposed algorithm effectively mitigates the ISI and ICI effects.

It is well known that communication using multiple antennas provides high data rate and reliability. Coding across space and time is necessary to fully exploit the gains offered by multiple input multiple output (MIMO) systems. One such popular method of coding for MIMO systems is space-time block coding. In applications where the terminals do not have enough physical space to mount multiple antennas, relaying or cooperation between multiple single antenna terminals can help achieve spatial diversity in such scenarios as well. Relaying techniques can also help improve the range and reliability of communication. Recently it has been shown that certain space-time block codes (STBCs) can be employed in a distributed fashion in single antenna relay networks to extract the same benefits as in point to point MIMO systems. Such STBCs are called distributed STBCs. However an important practical issue with STBCs and DSTBCs is its associated high maximum likelihood (ML) decoding complexity. The central theme of this thesis is to systematically construct STBCs and DSTBCs applicable for various scenarios such that are amenable for low decoding complexity. The first part of this thesis provides constructions of high rate STBCs from crossed product algebras that are minimum mean squared error (MMSE) optimal, i.e., achieves the least symbol error rate under MMSE reception. Moreover several previous constructions of MMSE optimal STBCs are found to be special cases of the constructions in this thesis. It is well known that STBCs from orthogonal designs offer single symbol ML decoding along with full diversity but the rate of orthogonal designs fall exponentially with the number of transmit antennas. Thus it is evident that there exists a tradeoff between rate and ML decoding complexity of full diversity STBCs. In the second part of the thesis, a definition of rate of a STBC is proposed and the problem of optimal tradeoff between rate and ML decoding complexity is posed. An algebraic framework based on extended Clifford algebras is introduced to study the optimal tradeoff for a class of multi-symbol ML decodable STBCs called ‘Clifford unitary weight (CUW) STBCs’ which include orthogonal designs as a special case. Code constructions optimally meeting this tradeoff are also obtained using extended Clifford algebras. All CUW-STBCs achieve full diversity as well. The third part of this thesis focusses on constructing DSTBCs with low ML decoding complexity for two hop, amplify and forward based relay networks under various scenarios. The symbol synchronous, coherent case is first considered and conditions for a DSTBC to be multi-group ML decodable are first obtained. Then three new classes of four-group ML decodable full diversity DSTBCs are systematically constructed for arbitrary number of relays. Next the symbol synchronous non-coherent case is considered and full diversity, four group decodable distributed differential STBCs (DDSTBCs) are constructed for power of two number of relays. These DDSTBCs have the best error performance compared to all previous works along with low ML decoding complexity. For the symbol asynchronous, coherent case, a transmission scheme based on orthogonal frequency division multiplexing (OFDM) is proposed to mitigate the effects of timing errors at the relay nodes and sufficient conditions for a DSTBC to be applicable in this new transmission scheme are given. Many of the existing DSTBCs including the ones in this thesis are found to satisfy these sufficient conditions. As a further extension, differential encoding is combined with the proposed transmission scheme to arrive at a new transmission scheme that can achieve full diversity in symbol asynchronous, non-coherent relay networks with no knowledge of the timing errors at the relay nodes. The DDSTBCs in this thesis are proposed for application in the proposed transmission scheme for symbol asynchronous, non-coherent relay networks. As a parallel to the non-coherent schemes based on differential encoding, we also propose non-coherent schemes for symbol synchronous and symbol asynchronous relay networks that are based on training. This training based transmission scheme leverages existing coherent DSTBCs for non-coherent communication in relay networks. Simulations show that this training scheme when used along with the coherent DSTBCs in this thesis outperform the best known DDSTBCs in the literature. Finally, in the last part of the thesis, connections between multi-group ML decodable unitary weight (UW) STBCs and groups with real elements are established for the first time. Using this connection, we translate the necessary and sufficient conditions for multi-group ML decoding of UW-STBCs entirely in group theoretic terms. We discuss various examples of multi-group decodable UW-STBCs together with their associated groups and list the real elements involved. These examples include orthogonal designs, quasi-orthogonal designs among many others.

No description available.

This work focuses on fixing measurement inaccuracies to which models and figures of merit are susceptible in two wireless communication environments: power amplifier and multipath. To emulate or rate the performance of these environments, models and figures of merit, respectively, are often used. The usefulness of a model depends on how accurately and efficiently it emulates its real-world counterpart. The usefulness of a figure of merit depends on how accurately it represents system behavior. Most discussions on the challenges and trade-offs faced in modeling nearly always focus on the complexity of the device or channel of interest and the resultant difficulty in describing it. Similarly, figures of merit are meant only to summarize the performance of the device or channel. At some point, either in generation or verification of a model or figure of merit, there is a dependence on measured data. Though the complexity and performance of the device or channel are challenges by themselves, there are other significant sources of distortion that must be minimized to avoid errors in the measured data. For this work, the unique distortion of power amplifier and multipath environments is considered, and then errors in measurement which would obscure these distortions are eliminated. Specifically, three measurement issues are addressed: 1) identifying measurement setup artifacts, 2) achieving consistent measurement results and 3) reducing variations in the environment. This work contributes to increasing the accuracy of microwave measurements used in the modeling of nonlinear high-power amplifiers and used in figures of merit for power amplifiers and multipath channels.

Αντικείμενο της παρούσας διδακτορικής διατριβής είναι η μελέτη και ο σχεδιασμός καινοτόμων αλγορίθμων φυσικού επιπέδου σε ασύρματα συστήματα επικοινωνίας που χρησιμοποιούν διαμόρφωση με πολύπλεξη συχνότητας ορθογωνίων φερουσών (Orthogonal Frequency Division Multiplexing - OFDM). Η έρευνα επικεντρώθηκε σε δύο κατηγορίες προβλημάτων, στον σχεδιασμό αλγορίθμων προσαρμοστικής διαμόρφωσης καθώς και αλγορίθμων αντιμετώπισης ισχυρού θορύβου φάσης. Αναπτύχθηκαν αλγόριθμοι εκτίμησης φάσης με γραμμική πολυπλοκότητα, μέσω ενός καινούργιου εναλλακτικού μοντέλου περιγραφής του συστήματος. Το μοντέλο αυτό επιτρέπει την επέκταση των κλασικών αλγορίθμων εκτίμησης της κοινής φάσης με στόχο την εκτίμηση του συνολικού διανύσματος θορύβου φάσης. Επιπλέον, η τεχνική διαγώνιας φόρτωσης (diagonal-loading) προσαρμόστηκε κατάλληλα για τη βελτίωση σύγκλισης της προτεινόμενης λύσης. Τέλος, προτάθηκε και αξιολογήθηκε ένα συνολικό σύστημα OFDM όπου η εκτίμηση του καναλιού, της διαταραχής φάσης και των δεδομένων βασίζονται στο κριτήριο ελαχίστων τετραγώνων, διατηρώντας έτσι τη συνολική πολυπλοκότητα σε χαμηλά επίπεδα. Στο πλαίσιο του σχεδιασμού αλγορίθμων προσαρμοστικής διαμόρφωσης προτείνεται ένα γενικό μοντέλο περιγραφής απόδοσης συστήματος ικανό να περιγράψει τα αναπτυσσόμενα πρωτόκολλα μετάδοσης. Η πρόταση αυτή εντάσσεται στην οικογένεια των τεχνικών ισοδύναμης σηματοθορυβικής απεικόνισης (Εffective SNR Μapping - ESM). Χρησιμοποιώντας τις τεχνικές ESM και κατάλληλους περιορισμούς στην παραμετροποίηση των μεταβλητών μετάδοσης, αναπτύχθηκαν αλγόριθμοι προσαρμοστικής διαμόρφωσης χαμηλής πολυπλοκότητας που ικανοποιούν διαφορετικά κριτήρια βελτιστοποίησης. Επιπρόσθετα, προτείνεται ένα γενικό πλαίσιο για τον σχεδιασμό αλγορίθμων προσαρμοστικής διαμόρφωσης, χρησιμοποιώντας προσεγγιστικά μοντέλα απόδοσης. Ορίστηκαν οι κατάλληλες μετρικές για την ποσοτικοποίηση της σπατάλης ενέργειας που επιφέρει η χρήση προσεγγιστικών μοντέλων. Μελετήθηκε η επίδραση της καθυστέρησης ανατροφοδότησης πληροφορίας καναλιού στους αλγορίθμους και παρήχθησαν κατάλληλα μοντέλα περιγραφής απόδοσης που συμπεριλαμβάνουν το χρόνο καθυστέρησης. Το συνολικό αποτέλεσμα της εργασίας είναι αλγόριθμοι που καταφέρνουν υψηλή απόδοση συστήματος, με χαμηλή πολυπλοκότητα, κάτι το οποίο τους κάνει υλοποιήσιμους σε ρεαλιστικά συστήματα. / The objective of this thesis is to study and develop novel, low complexity physical layer algorithms for Orthogonal Frequency Division Multiplexing (OFDM) based communication systems. The study aims at two algorithmic categories, namely adaptive modulation and coding and compensation of severe phase noise (PHN) errors. A parameterized windowed least-squares (WLS) decision directed phase error estimator is proposed via proper (alternative) system modeling, applied to both channel estimation and data detection stage in OFDM systems. The window is optimized so as to minimize the post-compensation error variance (PCEV) of the residual phase, analytically computed for arbitrary PHN and frequency offset (FO) models. Closed-form expressions for near-optimal windows are derived for zero-mean FO, Wiener and first-order autoregressive PHN models, respectively. Furthermore, the diagonal-loading approach is properly employed, initially proposed for providing robustness to a general class of estimators in the presence of model mismatch, to enhance convergence of the iterative estimation scheme, in those high-SNR regions where the effect of data decision errors dominates performance. In the proposed OFDM scheme, channel, IFO estimation and data equalization are also based on the LS criterion, thus keeping the overall system complexity low. A generic performance description model is proposed and used for AMC algorithmic design, capable of describing most of current and under preparation communication protocols. This model proposition is incorporated to a larger family of performance modelling techniques named Effective SNR Mapping techniques (ESM). Using the ESM techniques and proper parameter adaptation constraints, a number of low-complexity AMC algorithms are developed under a chosen set of optimization scenarios. A framework for the design of AMC algorithms using approximate performance description models is proposed. Specific bounds are derived for quantifying the power loss when using approximate models. The effect of outdated channel state information is also studied by statistically characterizing the effective SNR at the receiver. This description allows parameter adaptation under mobility scenarios. The main value of this collective procedure is the development of low complexity- high performance algorithms, implementable on pragmatic OFDM systems.