Spelling suggestions: "subject:"oxalic acid."" "subject:"oxalico acid.""
41 |
Developing Improved Strategies of Remediating Arsenic Contaminated AquifersSun, Jing January 2015 (has links)
Groundwater arsenic contamination is currently a global problem, and also a concern at numerous former industrial sites, agricultural sites, landfill sites and mining operations in the U.S. This dissertation aims to develop improved strategies of remediating these arsenic contaminated aquifers. It focuses on two distinct approaches of remediation: (1) mobilizing arsenic from contaminated aquifer sediments to decrease the quantity of arsenic at the source of contamination; and (2) immobilizing arsenic in situ, to decrease the mobility and bioavailability of this arsenic. Optimal remediation may well involve combinations of these two approaches.
Arsenic mobilization using oxalic acid is effective because oxalic acid dissolves arsenic host minerals and competes for sorption sites on those minerals. In this dissertation, oxalic acid treatment was tested using sediments with contrasting iron mineralogies and arsenic contents from the Dover Municipal Landfill and the Vineland Chemical Company Superfund sites. Oxalic acid mobilized arsenic from both sites and the residual sediment arsenic was less vulnerable to microbial reduction than before the treatment. Oxalic acid thus could improve the efficiency of widely used pump-and-treat remediation. Oxalic acid did not remove all of the reactive iron(III) minerals in Vineland sediment samples, and thus released significant quantities of arsenic into solution under reducing conditions than the Dover samples. Therefore, the efficacy of pump-and-treat must consider iron mineralogy when evaluating its overall potential for remediating groundwater arsenic.
Arsenic immobilization occurs by changing the chemical state, or speciation, of arsenic and other elements in the system. Arsenic is often assumed to be immobile in sulfidic environments. In this dissertation, sulfate reduction was stimulated in sediments from the Vineland Superfund site and the Coeur d'Alene mining district. Sulfate reduction in the Coeur d'Alene sediments was more effective at removing arsenic from solution than the Vineland sediments. The Vineland sediments initially contained abundant reactive ferrihydrite, and underwent extensive sulfur cycling during incubation. As a result, arsenic in the Vineland sediments could not be effectively converted to immobile arsenic-bearing sulfides, but instead a part of the arsenic was probably converted to soluble thioarsenates. Therefore, coupling between the iron and sulfur redox cycles must be fully understood for arsenic immobilization by sulfate reduction to be successful.
Arsenic can also be immobilized by retention on magnetite (Fe3O4). Magnetite is stable under a wide range of aquifer conditions including both oxic and iron(III)-reducing environments. In this dissertation, a series of experiments were performed with sediments from the Dover and Vineland Superfund sites, to examine the potential of magnetite for use in arsenic immobilization. Our data suggest that the formation of magnetite can be achieved by the microbial oxidation of ferrous iron with nitrate. Magnetite can incorporate arsenic into its structure during formation, forming a stable arsenic sink. Magnetite, once formed, can also immobilize arsenic by surface adsorption, and thus serve as a reactive filter when contaminated groundwater migrates through the treatment zone. Reactive transport modeling is used for investigating the magnetite based arsenic immobilization strategy and for scaling laboratory results to field environments. Such modeling suggests that the ratio between iron(II) and nitrate in the injectant regulates the formations of magnetite and ferrihydrite, and thus regulates the long-term evolution of the effectiveness of the strategy. The results from field-scale models favor scenarios that rely on the chromatographic mixing of iron(II) and nitrate after injection.
The studies in this dissertation demonstrate that the environmental fate of arsenic depends on the biogeochemical cycling of arsenic, iron, and to a lesser extent, sulfur. The development of effective groundwater arsenic remediation strategies depends on a good understanding of each of the involved processes, and their combinations.
|
42 |
High level waste system impacts from acid dissolution of sludgeKetusky, Edward Thomas 31 March 2008 (has links)
Currently at the Savannah River Site (SRS), there are fifteen single-shell, 3.6-million liter tanks containing High Level Waste. To close the tanks, the sludge must be removed. Mechanical methods have had limited success. Oxalic acid cleaning is now being considered as a new technology. This research uses sample results and chemical equilibrium software to develop a preferred flowsheet and evaluate the acceptability of the system impacts.
Based on modeling and testing, between 246,000 to 511,000 l of 8 wt% oxalic acid were required to dissolve a 9,000 liter Purex sludge heel. For SRS H-Area modified sludge, 322,000 to 511,000 l were required. To restore the pH of the treatment tank slurries, approximately 140,000 to 190,000 l of 50 wt% NaOH or 260,000 to 340,000 l of supernate were required.
When developing the flowsheet, there were two primary goals to minimize downstream impacts. The first was to ensure that the Resultant oxalate solids were transferred to DWPF, without being washed. The second was to transfer the remaining soluble sodium oxalates to the evaporator drop tank, so they do not transfer through or precipitate in the evaporator pot.
Adiabatic modeling determined the maximum possible temperature to be 73.5°C and the maximum expected temperature to be 64.6°C. At one atmosphere and at 73.5°C, a maximum of 770 l of water vapor was generated, while at 64.6°C a maximum 254 l of carbon dioxide were generated. Although tank wall corrosion was not a concern, because of the large cooling coil surface area, the corrosion induced hydrogen generation rate was calculated to be as high as 10,250 l/hr. Since the minimum tank purge exhaust was assumed to be 5,600 l/hr, the corrosion induced hydrogen generation rate was identified as a potential concern.
Excluding corrosion induced hydrogen, trending the behavior of the spiked constituents of concern, and considering conditions necessary for ignition, energetic compounds were shown not to represent an increased risk Based on modeling, about 56,800 l of Resultant oxalates could be added to a washed sludge batch with minimal impact on the number of additional glass canisters produced. For each sludge batch, with 1 to 3 heel dissolutions, about 60,000 kg of sodium oxalate entered the evaporator system, with most collecting in the drop tank, where they will remain until eventual salt heel removal. For each 6,000 kg of sodium oxalate in the drop tank, about 189,000 l of Saltstone feed would eventually be produced.
Overall, except for corrosion-induced hydrogen, there were no significant process impacts that would forbid the use of oxalic acid in cleaning High Level Waste tanks. / MATHEMATICAL SCIENCES / M. Tech. (Chemical Engineering)
|
43 |
Étude de la réponse adaptative du champignon filamenteux Botrytis cinerea à différents stress métalliques / Study of the adaptive response of the filamentous fungus Botrytis cinerea to different metal stressCherrad, Semcheddine 29 September 2011 (has links)
De nombreux métaux sont indispensables au métabolisme cellulaire, d’autres sont considérés toxiques même à de faibles concentrations. Différents champignons appartenant à des différents groupes taxonomiques ont été identifiés dans des milieux pollués et ont révélé une capacité à survivre et à croître en présence de concentrations potentiellement toxiques. Pour s'adapter à ce stress, les champignons ont développé plusieurs mécanismes au niveau intracellulaire et extracellulaire. En particulier, ils sont connus pour leur capacité à sécréter un large panel de protéines. Cependant, leur rôle dans l'adaptation des champignons à la toxicité des métaux n'a pas encore été étudié. Pour répondre à cette question, le champignon Botrytis cinerea a été soumis à un stress métallique en présence de cuivre, zinc, nickel ou cadmium, les protéines sécrétées ont été collectées et séparées par 2D-PAGE. Deux métabolites ont également été analysés, l'acide oxalique et la nicotianamine. Enfin, les capacités de biosorption des champignons isolés à partir de sols pollués ont été étudiées. L'analyse du sécrétome a révélé 116 spots dont le volume varie en réponse d'au moins un métal. Cinquante-cinq de ces spots sont associés à des protéines uniques. La classification fonctionnelle de ces protéines a révélé que la production d'oxydoréductases et des enzymes dégradant la paroi cellulaire a été modifié en réponse aux métaux. L’étude de la production d'acide oxalique par Botrytis cinerea en réponse aux métaux montre une induction de la sécrétion d'oxalate en réponse au Zn et une accumulation de la nicotianamine, métabolite intracellulaire capable de fixer les métaux chez les plantes. Le gène de la nicotianamine synthase, est d’ailleurs surexprimé en présence de Cu, Zn et Ni. Plusieurs espèces fongiques ont été isolées à partir de sols pollués par des métaux, parmi ceux-ci Trichoderma asperellum et Zygorrhynchus moelleri montrent les meilleurs capacités de biosorption (10mg de Cu/g de matière sèche) des ions Cu / Metal ions are essential elements in many cellular processes. However, metal excess becomes toxic and constitutes a global environmental hazard. A range of fungi from all major taxonomic groups were found in metal-polluted habitats and the ability to survive and grow in the presence of potentially toxic concentrations is frequently encountered. To adapt to this stress, fungi have evolved several mechanisms at both intracellular and extracellular levels. In particular, fungi are well known for their ability to secrete a large panel of proteins. However, their role in the adaptation of fungi to metal toxicity has not yet been investigated. To address this question, here, the fungus Botrytis cinerea was challenged to copper, zinc, nickel or cadmium stress and secreted proteins were collected and separated by 2D-PAGE. Two metabolites were also analyzed, oxalic acid and nicotianamine. Finally, biosorption capacities of fungi isolated from polluted soils were investigated. Secretome analysis revealed one hundred and sixteen spots whose volume varied in at least one tested condition were observed on 2D gels. Fifty-five of these spots were associated with unique proteins and functional classification revealed that the production of oxidoreductases and cell-wall degrading enzymes was modified in response to metals. Study of oxalic acid and nicotianamine (NA) production by Botrytis cinerea in response to tested metals reveal that Zn induces oxalate secretion and that NA synthase gene is upregulated in presence of Cu, Zn and Ni. Many fungal species were isolated from metal polluted soils among them Trichoderma asperellum and Zygorrhynchus moelleri which show the maximum biosorption capacities of Cu ions
|
44 |
Co-processing of drugs and co-crystal formers and its effect on pharmaceutical dosage-form performance. Co-crystallization of urea/ 2-methoxybenzamide, caffeine/ malonic acid, caffeine/ oxalic acid and theophylline/ malonic acid systems: Solid-state characterization including imaging, thermal, X-ray and Raman spectroscopic techniques with subsequent evaluation of tableting behaviourIbrahim Mohamed, Asim Y. January 2008 (has links)
This dissertation has focused on the solid-state characterization of different co-crystal system as well as the effect of co-crystallization of these systems on pharmaceutical dosage form performance. Urea/ 2-MB, caffeine/ malonic acid, caffeine/ oxalic acid and theophylline/ malonic acid co-crystals were prepared using co-grinding- and co-precipitation techniques. In addition, the synthesis of co-crystals through two novel methods has been demonstrated. This includes compaction and convection mixing. The solid-state characterization of the co-crystals has been carried out using XRPD, Raman spectroscopy, DSC, TGA, hot-stage microscopy and SEM. After preparation of co-crystals, tablets have been produced from co-ground-, co-precipitated-, and physical mixtures using Compaction Studies Press (Kaleva), and the data were recorded to compare between the different mixtures, regarding compactibilty, compressibility and deformational properties. The DSC results showed that the physical mixtures of all systems, formed co-crystals during heating process. For systems of urea/ 2-MB, caffeine/ malonic acid and theophylline/ malonic acid, the co-ground mixture produced tablets with higher tensile strength compared with either co-precipitated or physical mixture. However, for caffeine/ oxalic acid system, the tensile strengths of compacts produced from the physical mixture were greater than those obtained from either co-ground or co-precipitated mixtures. The Heckel data suggested that urea/ 2-MB, caffeine/ malonic acid and theophylline/ malonic acid systems are Type 1 materials, as an extensive linearity during compression was indicative of a plastic deformation mechanism, while the caffeine/ oxalic acid system was Type 2 materials. However, the co-precipitated mixture of urea/ 2-MB system was the least compressible, as it possessed the greatest value of yield pressure (85 MPa) and the highest elastic recovery (7.42%). The co-precipitated mixture of both of caffeine/ malonic acid and theophylline/ malonic acid systems was the most compressible with small yield pressure values of (44 & 80 MPa) and elastic recovery of (7.2% & 6.56%), respectively. The co-ground mixture of caffeine/ oxalic acid possessed the highest value of yield pressure (166 MPa) and thus the lowest compressibility among other mixtures. Furthermore, the addition of microcrystalline cellulose and α-lactose monohydrate has affected the crystallinity as well as the tableting properties of the co-crystals. After the addition of excipients, the tensile strength of compacts was about 2 times higher than any other mixture. Finally, urea/ 2-MB and caffeine/ malonic acid co-crystals were successfully synthesized through convection mixing and compaction. / Islamic University of Omdurman and the Ministry of Higher Education in Sudan
|
45 |
Investigação do ácido etanodióico na formação de filmes superficiais sobre zinco e avaliação do efeito destes filmes na resistência à corrosão / Investigation of the ethanedioic acid on the formation of surface films on zinc and evaluation of the effect of these films formed on the corrosion resistanceOliveira, Marcelo de 14 August 2017 (has links)
Um dos métodos mais utilizados para proteção contra a corrosão de aços comuns consiste na proteção catódica com revestimentos metálicos eletroquimicamente mais ativos, que estes. Os revestimentos de zinco são os mais usados para este tipo de proteção. De forma a protegerem o substrato, estes revestimentos devem atuar como anodos de sacrifício, sofrendo corrosão e transformando o substrato de aço em catodo. Todavia, não é de interesse, que o revestimento de zinco apresente altas taxas de corrosão de forma que a proteção contra a corrosão conferida ao aço seja duradoura. Uma das formas mais empregadas para reduzir a velocidade de corrosão do revestimento de zinco é por meio de tratamentos da superfície, por exemplo, por tratamentos de conversão. Os tratamentos de conversão mais eficientes são os que utilizam e geram rejeitos, que contêm íons de cromo hexavalente. Todavia, estes íons são carcinogênicos e tóxicos e, dessa forma, os processos que os utilizam em alguma etapa do tratamento, vêm sofrendo crescentes restrições, já sendo proibidos em países com leis ambientais mais rígidas. Esta é a razão para o crescente interesse e grande investimento em pesquisa tratamentos, que possam resultar em revestimentos com potencialidade para substituir, de forma eficiente e efetiva o uso do cromo hexavalente. Este foi o objetivo do presente trabalho. Neste estudo, foi investigado o efeito de tratamentos, que resultam em camadas de conversão na presença de ácido oxálico e na proteção contra a corrosão da superfície do zinco. Camadas de conversão foram obtidas por imersão de amostras de zinco em soluções de ácido oxálico (ácido etanodióico) com diferentes concentrações. Todas as soluções de tratamento apresentaram elevada acidez e resultaram em ataque da superfície de zinco com formação de revestimento de conversão com diferentes características. Ensaios preliminares de névoa salina foram então realizados para investigar a proteção conferida pelo sistema revestimento de conversão-verniz contra a corrosão do substrato de zinco. Estes ensaios foram decisivos para a escolha da faixa de concentração do banho de conversão com maior potencial para formação de revestimentos de conversão protetores. Os resultados deste ensaio e os de espectroscopia de impedância eletroquímica mostraram que tratamentos em soluções com composição superiores a 10-1 M de ácido oxálico resultaram em camadas muito defeituosas, nas quais o ataque localizado do substrato metálico é favorecido, sendo obtidas impedâncias menores que a superfície do zinco sem qualquer tratamento. Os resultados de XPS mostraram, que os revestimentos de conversão formados em soluções de ácido oxálico na faixa de 10-3 M a 10-1 M são compostos de oxalato de zinco e produtos de corrosão do zinco, especificamente ZnO, Zn (OH)2, e ZnCO3. Já a concentração de 10-1 M de ácido oxálico foi a, que produziu os resultados mais promissores com a formação de um revestimento, que conferiu proteção mais duradoura à superfície do zinco entre os obtidos. As espessuras médias das camadas de conversão de oxalato de zinco formadas em soluções com 10-1 M e 1 M de ácido oxálico, estimadas por FIB, foram respectivamente 600 nm e 300 nm, o que mostra que a concentração de 1 M de ácido causou intenso ataque corrosivo da superfície, enquanto a camada formada em meio com 10-1 M permitiu a deposição de camada mais espessa e mais protetora contra a corrosão do substrato. Os resultados de XPS indicaram a degradação da camada de oxalato de zinco com o tempo de ensaio, porém o ataque desta ao longo do ensaio de corrosão, resulta na formação de simonkolleite, identificada por difração de raios X, para períodos mais longos do ensaio de corrosão, no caso do revestimento formado em solução com 10-1 M em comparação a 1M. A simonkolleite atua por efeito barreira bloqueando os defeitos/porosidade da camada. O crescente acúmulo destes produtos de corrosão com a continuidade do processo corrosivo e a aderência destes ao substrato metálico foi indicada para superfície tratada em solução com 10-1 M de ácido oxálico. Finalmente, foi proposto um modelo para interação entre o revestimento de conversão de oxalato de zinco e os produtos de corrosão em que a retenção dos produtos de corrosão na superfície faz com, que a camada na superfície se torne mais espessa e mais compacta com o tempo de exposição ao ensaio de corrosão. Estas observações explicam o aumento de impedância observado com o tempo de ensaio nesta condição. Os resultados obtidos permitiram concluir, que o revestimento de conversão de oxalato de zinco formado em solução com 10-1 M de ácido oxálico resulta em proteção efetiva do substrato metálico além de apresentar boa aderência com camada de verniz. Estes resultados indicam potencialidade deste tratamento como preparação de superfícies de zinco, que serão recobertas com revestimentos orgânicos (tintas, vernizes ou lacas). / One of the most used methods for protection of common steels is the cathodic protection by galvanic coupling with metallic coatings electrochemically more active than these. Zinc coatings are the most commonly used for this type of protection. In order to protect the metallic substrate, these coatings must act as sacrificial anodes, corroding themselves and converting the steel substrate into cathode. However, it is not appropriate that the zinc coating presents high corrosion rates, so that the corrosion protection conferred to the steel is long-lasting. One of the most commonly employed methods of reducing the corrosion rate of zinc coatings is by surface treatments, such as, conversion treatments. The most efficient conversion treatments to date are those that use hexavalent chromium ions or generate residues containing these ions. However, hexavalent chromium is carcinogenic and toxic and, therefore, the processes that involve their use at some stage of the treatment, are under increasing restrictions, and have already been prohibited in developed countries. This is the reason for the growing interest and great investment in research studies in search for treatments that may result in coatings with the potential to efficiently and effectively replace the use of hexavalent chromium. This was the objective of the present study. In this study, the effect of treatments in oxalic acid solutions that resulted in conversion layers on the corrosion protection of zinc surface has been investigated. Conversion layers were obtained by immersion of zinc samples in solutions of oxalic acid (ethanedioic acid) with different concentrations. All the treatment solutions presented high acidity and resulted in attack of zinc surface and formation of conversion coatings of different characteristics. A layer of varnish was applied and preliminary salt spray tests were then carried out to investigate the corrosion protection provided by the system conversion coating -varnish to the zinc substrate. These tests were decisive for the choice of the conversion bath composition range with greater potentialities for the formation of protective conversion coatings. The results of the salt spray test and of electrochemical impedance spectroscopy (EIS) showed that treatments in solutions with compositions greater than 10-1 M of oxalic acid resulted in very defective conversion layers in which the localized attack of the metallic substrate is favored, and lower impedances than the zinc surface without any treatment were obtained for surfaces treated in these solution. The XPS results showed that conversion coatings formed in oxalic acid solutions in the range of 10-3 M to 10-1 M are composed of zinc oxalate and zinc corrosion products, specifically ZnO, Zn (OH)2, and ZnCO3. The concentration related to the most promising results was 10-1 M and in this solution, the coating formed that promoted the longer lasting protection of the zinc surface among those obtained. The average thicknesses of the zinc oxalate conversion layers formed in solutions with 10-1 M and 1 M of oxalic acid, estimated by FIB, were respectively 600 nm and 300 nm. This result showed that in 1 M of oxalic acid an intense corrosive attack of the zinc surface occurred, while the layer formed in 10-1 M was thicker and more protective against substrate corrosion. The XPS results indicated degradation of the zinc oxalate layer formed in 10-1 M solution with time of exposure to the test solution, but for the protection of the coating lasted for longer periods, comparatively to that formed in 1M solution, once the attack of the first film resulted in formation of simonkolleite, which was identified by X-ray diffraction. Simonkolleite acts by barrier effect blocking defects / porosity in the conversion layer. The increasing accumulation of corrosion products with test time and their adhesion to the metallic substrate was indicated for surface treated in solution with 10-1 M of oxalic acid. Finally, a model has been proposed for the interaction between the zinc oxalate conversion coating and the corrosion products in which the retention of these products on the surface is promoted by the conversion coating and the surface layer becomes thicker and more compact with time of exposure. These observations explain the increased impedance observed with the test time associated to this coating. The obtained results allowed concluding that the conversion coating of zinc oxalate formed in solution with 10-1 M of oxalic acid results in effective protection of the metallic substrate besides promoting good adhesion with a layer of varnish. These results indicate the potential of this treatment as preparation of zinc surfaces that will be covered with organic coatings (paints, varnishes or lacquers).
|
46 |
Aplica??o da t?cnica eletroanal?tica de pulso diferencial usando o eletrodo de carbono v?treo modificado com ciste?na para monitorar a degrada??o eletroqu?mica de ?cido ox?licoNeves, Nathalia Costa Viana 31 July 2013 (has links)
Made available in DSpace on 2014-12-17T15:42:11Z (GMT). No. of bitstreams: 1
NathaliaCVN_DISSERT.pdf: 2020842 bytes, checksum: efcd9ca5e5cfd7d63412f72c80546c39 (MD5)
Previous issue date: 2013-07-31 / In this paper, the technique of differential pulse voltammetry (DPV) has been
studied for monitoring the concentration of oxalic acid (OA) during their
electrochemical oxidation (EO) in acidic medium using platinum anode supported on
titanium (Ti / Pt). The DPV was standardized and optimized using a glassy carbon
electrode modified with cysteine. The modification with cysteine was developed
electrochemically, forming a polymeric film on the surface of the glassy carbon
electrode. The formation of the polymer film was confirmed by analysis of scanning
electron microscope and atomic force microscope, confirming the modification of the
electrode. The electrochemical degradation was developed using different current
densities 10, 20 30 and 40 mA cm -2 electrode with Ti / Pt observing the degradation
of oxalic acid, and monitored using the method of KMnO4 titration. However, the
analyzes with DPV showed the same behavior elimination of oxalic acid titration.
Compared with the titration method classical observed and DPV could be a good fit,
confidence limits of detection and confirming the applicability of the technique
electroanalytical for monitoring the degradation of oxalic acid / No presente trabalho, a t?cnica de voltametria de pulso diferencial (DPV) foi
estudada para o monitoramento da concentra??o de ?cido ox?lico (OA) durante a
sua oxida??o eletroqu?mica (EO) em meio ?cido utilizando o ?nodo de platina
suportada em tit?nio (Ti/Pt). A t?cnica de DPV foi padronizada e otimizada usando
um eletrodo de carbono v?treo modificado com ciste?na. A modifica??o com ciste?na
foi desenvolvida eletroquimicamente, formando um filme polim?rico na superf?cie do
eletrodo de carbono v?treo. A forma??o do filme polim?rico foi confirmada por an?lise
de Microsc?pio Eletr?nico de Varredura e Microsc?pio de For?a At?mica,
confirmando a modifica??o na superf?cie do eletrodo. A degrada??o eletroqu?mica foi
desenvolvida usando diferentes densidades de corrente, 10, 20 e 30 mA cm-? com
eletrodo de Ti/Pt, observando a degrada??o do ?cido ox?lico, sendo monitorado
empregando a metodologia de titula??o com KmnO4. No entanto, as an?lises com
DPV mostraram o mesmo comportamento de elimina??o do acido ox?lico,
observado com a titula??o. Comparado com o m?todo de titula??o cl?ssica e DPV
conseguiu-se um bom ajuste, intervalos de confian?a e limites de detec??o
confirmando a aplicabilidade da t?cnica eletroanal?tica para o monitoramento da
degrada??o de ?cido ox?lico
|
47 |
Application d’une stratégie de lutte intégrée contre le parasite Varroa destructor dans les colonies d’abeilles mellifères du QuébecGiovenazzo, Pierre 04 1900 (has links)
Le parasite Varroa destructor provoque depuis plus de 30 ans la perte de nombreuses colonies à travers le monde. L’utilisation d’acaricides de synthèse s’est avérée inefficace au Canada et ailleurs dans le monde à la suite de la sélection de varroas résistants. Dans ce contexte, il est devenu impératif de trouver de nouveaux moyens pour contrôler cette peste apicole. Ce travail original de recherche a pour but de déterminer les paramètres fondamentaux d’une lutte intégrée contre la varroase fondée sur l’utilisation périodique de différents pesticides organiques (l’acide oxalique, l’acide formique et le thymol) associée à des seuils d’interventions.
Les seuils d’intervention ont été déterminés à l’aide de régressions linéaires entre les taux de parasitisme par V. destructor et la formance zootechnique des colonies d’abeilles mellifères (production de miel et force des colonies). Un total de 154 colonies d’abeilles du Centre de recherche en sciences animales de Deschambault (CRSAD) ont été suivies de septembre 2005 à septembre 2006. Les seuils calculés et proposés à la suite de cette recherche sont de 2 varroas par jour (chute naturelle) au début mai, 10 varroas par jour à la fin juillet et de 9 varroas par jour au début septembre.
L’efficacité des traitements organiques avec l’acide oxalique (AO), l’acide formique (AF) et le thymol a été vérifiée en mai (avant la première miellée) en juillet (entre deux miellées), en septembre (après la miellée et pendant le nourrissage des colonies) et en novembre (avant l’hivernage). L’acide oxalique a été appliqué en utilisant la méthode d’égouttement (4% d’AO p/v dans un sirop de sucrose 1 :1 p/v). L’acide formique a été appliquée sous forme de MiteAwayII™ (tampon commercial imbibé d’AF 65% v/v placé sur le dessus des cadres à couvain), Mitewipe (tampons Dri-Loc™ 10/15cm imbibés de 35 mL d’AF 65% v/v placés sur le dessus des cadres à couvain) ou Flash (AF 65% coulé directement sur le plateau inférieur d’une colonie, 2 mL par cadre avec abeilles). Le thymol a été appliqué sous forme d’Apiguard™ (gélose contenant 25% de thymol p/v placée sur le dessus des cadres à couvain). Les essais d’efficacité ont été réalisés de 2006 à 2008 sur un total de 170 colonies (98 appartenant au CRSAD et 72 appartenant au privé). Les résultats montrent que les traitements de printemps testés ont une faible efficacité pour le contrôle des varroas qui sont en pleine croissance durant cette période. Un traitement avec l’AF à la mi-été permet de réduire les taux de parasites sous le seuil en septembre mais il y a risque de contaminer la récolte de miel avec des résidus d’AF. Les traitements en septembre avec le MiteAwayII™ suivis par un traitement à l’acide oxalique en novembre (5 mL par égouttement entre chaque cadre avec abeilles, 4% d’AO p/v dans un sirop de sucrose 1 :1 p/v) sont les plus efficaces : ils réduisent les niveaux de varroase sous le seuil de 2 varroas par jour au printemps. Nos résultats montrent également que les traitements réalisés tôt en septembre sont plus efficaces et produisent des colonies plus fortes au printemps comparativement à un traitement réalisé un mois plus tard en octobre.
En conclusion, ce travail de recherche démontre qu’il est possible de contenir le développement de la varroase dans les ruchers au Québec en utilisant une méthode de lutte intégrée basée sur une combinaison d’applications d’acaricides organiques associée à des seuils d’intervention. / For nearly 30 years, Varroa destructor has been responsible for the loss of many honey bee colonies around the world. The continued use of synthetic acaricides has resulted in their reduced efficacy against this pest in Canada and in other countries because of the selection of resistant mite populations. With this situation still present, it has become of utmost importance to develop efficient methods to control this apicultural pest. The major goal of this original work is to determine the fundamental parameters underlying the use of an integrated pest management (IPM) strategy against the varroa mite. The IPM strategy developed in this research is based on the periodic use of organic pesticides (oxalic acid, formic acid and thymol) and treatment threshold.
Treatment thresholds were determined from linear regressions between the varroa mite levels and the zootechnical performances (honey production and colony strength) of honey bee colonies. A total of 154 honey bee colonies from the livestock of the “Centre de recherche en sciences animales de Deschambault” (CRSAD) were monitored from September 2005 to September 2006. Based on our findings, we propose economic treatment thresholds for three periods in the year: early May, late July and early September that are respectively 2, 10 and 9 varroa mites per day.
Efficacy of the various organic treatments: formic acid (FA), oxalic acid (OA) and thymol was evaluated in May (before the first honey flow), in July between two honey flows, in September (after the honey flow and before the fall feeding of colonies) and in November (before wintering). OA was applied using the trickling method (4% OA w/v in a sucrose syrup 1:1 w/v). FA was applied using MiteAwayII™ (pads imbedded with FA 65% v/v placed on top of brood frames), Mitewipe (Dri-Loc™ pads 10/15cm imbedded with 35 mL FA 65% v/v placed on top of brood frames), Flash (FA 65% poured directly on the bottom board of colonies, 2 mL per frame with bees). Thymol was applied using Apiguard™ (gel with 25% de thymol w/v placed on top of the brood frames). Efficacy trials were realised from 2006 to 2008 on a total of 170 colonies (98 from the CRSAD and 72 owned by a commercial beekeeper). Results show that treatments applied in spring give low efficacy on reducing varroa mite populations that are in full growth at this time because of large amounts of brood available for mite reproduction. Application of a FA treatment in mid-summer offers the opportunity to reduce mite populations at the 11 mites per day September threshold but FA summer application is accompanied by a risk of incorporating residues in the harvested honey. Application of MiteAwayII™ in September followed by an oxalic acid treatment in November (trickling method 4% OA w/v in a sucrose syrup 1 :1 w/v, 5 mL between frames with bees) gave the best efficacy results: varroa mite levels are reduced below the 2 mites per day spring threshold. Our results also show that an early September management strategy of colonies for winter preparation (varroa treatment and fall feeding) gives greater varroa control, higher colony winter survival and stronger colonies in spring when compared to a later treatment in October.
In conclusion, this work shows that varroa mite control in honey bee colonies in Québec is possible by using an integrated pest management strategy based on the application of a combination of organic acaricides in association with treatment thresholds.
|
48 |
Estudo de transições de fase em cristais de l-alanina + ácido oxálicoVilela, Rivelino Cunha January 2013 (has links)
VILELA, Rivelino Cunha. Estudo de transições de fase em cristais de l-alanina + ácido oxálico. 2013. 113 f. Tese (Doutorado em Física) - Programa de Pós-Graduação em Física, Departamento de Física, Centro de Ciências, Universidade Federal do Ceará, Fortaleza, 2013. / Submitted by Edvander Pires (edvanderpires@gmail.com) on 2015-10-29T21:51:24Z
No. of bitstreams: 1
2013_tese_rcvilela.pdf: 12577577 bytes, checksum: 4dc32419c1bbdde79375612c04227181 (MD5) / Approved for entry into archive by Edvander Pires(edvanderpires@gmail.com) on 2015-11-03T19:48:22Z (GMT) No. of bitstreams: 1
2013_tese_rcvilela.pdf: 12577577 bytes, checksum: 4dc32419c1bbdde79375612c04227181 (MD5) / Made available in DSpace on 2015-11-03T19:48:22Z (GMT). No. of bitstreams: 1
2013_tese_rcvilela.pdf: 12577577 bytes, checksum: 4dc32419c1bbdde79375612c04227181 (MD5)
Previous issue date: 2013 / In the present word we have studied the effect of temperature on the Raman spectra of crystals of L-alanine + oxalic acid, C3H8NO2+.C2HO4-. Raman spectroscopy measurements were performed on polycrystalline samples at different temperatures varying in the range from room temperature to T = 20 K; a tentative assignment of all normal modes was furnished. In order to help the understanding of the crystal behavior we have also obtained X-ray diffractograms and studied the dependence of lattice parameters through dilatometry as a function of temperature in the 290 K – 93 K range. The three different techniques allowed us to construct a picture of the material under low temperature conditions. As a consequence we have realized that L-alanine + oxalic acid crystal undergoes three phase transitions at low temperatures. The splitting of a band at 90 cm-1 and an anomaly in one of the lattice parameters are the signature for the first phase transition that is observed at 250 K. At 150 K it was observed the appearance of two new bands in the Raman spectrum and, simultaneously, it was observed change in the curves of a and c lattice parameters. Additionally, it was verified the appearance of new peaks in the X-ray diffractogram at the same temperature, characterizing the second phase transition. At a temperature even lower, at about 43 K, it was verified the occurrence of the third phase transition that has as main characteristic the splitting of two bands that are associated to the lattice modes. Changes in the modes associated with CH3 and NH3+ during the cooling is discussed. An important behavior of the crystal with the cooling process was the red shift of the band of lower frequency, similar to the soft-mode vibration of ferroelectric materials, although the frequency of the mode in L-alanine + oxalic acid does not goes to zero. Based on the results on Raman spectroscopy, dilatometry and X-ray diffraction, and on the possible symmetry sites occupied by the molecules through the O=CC group in the various phases, it is suggested the following sequence of phase transitions D24 C2h5 Cs3 C23, which should occur at 250 K, 150 K and 43 K. / Neste trabalho, estudou-se o efeito da temperatura nos espectros Raman de cristais de L-alanina + ácido oxálico, C3H8NO2+.C2HO4-. Foram realizadas medidas de espectroscopia Raman em policristais a diferentes temperaturas no intervalo compreendido entre a temperatura ambiente e a temperatura de 20 K, sendo fornecida uma identificação tentativa para todos os modos normais de vibração observados. Para auxiliar o entendimento do comportamento do cristal também foram obtidos os difratogramas de raios-X bem como estudada a dependência dos parâmetros de rede em função da temperatura através de dilatometria no intervalo entre 290 K e 93 K. As três técnicas utilizadas em conjunto permitiram mostrar o comportamento estrutural do material em baixas temperaturas. Deste quadro foi possível inferir que os cristais de L-alanina + ácido oxálico apresentam três diferentes transições de fase durante o resfriamento. Em 250 K o aparecimento de um dubleto em 90 cm-1 e a anomalia num dos parâmetros de rede apontam para a ocorrência da primeira transição de fase. Em 150 K surgem pelo menos duas novas bandas no espectro Raman, ao mesmo tempo em que ocorrem bruscas mudanças de inclinação nas curvas que representam as dimensões dos eixos a e c do cristal. Também se verifica que, de forma semelhante ao que ocorre com os espectros Raman, aparecem novos picos no difratograma de raios-X em torno desta temperatura, caracterizando assim a segunda transição de fase. A uma temperatura ainda mais baixa, em torno de 43 K, foi verificada a ocorrência da terceira transição de fase, que tem como principal característica a separação de dois modos Raman associados a modos da rede. Mudanças nos ambientes dos grupos CH3 e do NH3+ durante o resfriamento são discutidas. Um importante aspecto apresentado pelos espectros Raman com o resfriamento da amostra foi o deslocamento da banda de mais baixa energia para menores valores de frequências, semelhantemente ao que ocorre com vibrações do tipo soft-mode em materiais ferroelétricos, embora a frequência do modo no cristal de L-alanina + ácido oxálico não tenha ido à zero. Baseado nos resultados acima e nos possíveis sítios de simetria ocupados pelas moléculas através do grupo O=CC nas diversas fases, sugere-se a seguinte sequência de transições de fase D24 para C2h5 para Cs3 para C23, que aconteceriam, respectivamente, nas temperaturas de 250 K, 150 K e 43 K.
|
49 |
ESTUDO DE TRANSIÃÃES DE FASE EM CRISTAIS DE L-ALANINA + ÃCIDO OXÃLICO / ESTUDO DE TRANSIÃÃES DE FASE EM CRISTAIS DE L-ALANINA + ÃCIDO OXÃLICORivelino Cunha Vilela 14 August 2013 (has links)
CoordenaÃÃo de AperfeiÃoamento de Pessoal de NÃvel Superior / Neste trabalho, estudou-se o efeito da temperatura nos espectros Raman de cristais de L-alanina + Ãcido oxÃlico, C3H8NO2+.C2HO4-. Foram realizadas medidas de espectroscopia Raman em policristais a diferentes temperaturas no intervalo compreendido entre a temperatura ambiente e a temperatura de 20 K, sendo fornecida uma identificaÃÃo tentativa para todos os modos normais de vibraÃÃo observados. Para auxiliar o entendimento do comportamento do cristal tambÃm foram obtidos os difratogramas de raios-X bem como estudada a dependÃncia dos parÃmetros de rede em funÃÃo da temperatura atravÃs de dilatometria no intervalo entre 290 K e 93 K. As trÃs tÃcnicas utilizadas em conjunto permitiram mostrar o comportamento estrutural do material em baixas temperaturas. Deste quadro foi possÃvel inferir que os cristais de L-alanina + Ãcido oxÃlico apresentam trÃs diferentes transiÃÃes de fase durante o resfriamento. Em 250 K o aparecimento de um dubleto em 90 cm-1 e a anomalia num dos parÃmetros de rede apontam para a ocorrÃncia da primeira transiÃÃo de fase. Em 150 K surgem pelo menos duas novas bandas no espectro Raman, ao mesmo tempo em que ocorrem bruscas mudanÃas de inclinaÃÃo nas curvas que representam as dimensÃes dos eixos a e c do cristal. TambÃm se verifica que, de forma semelhante ao que ocorre com os espectros Raman, aparecem novos picos no difratograma de raios-X em torno desta temperatura, caracterizando assim a segunda transiÃÃo de fase. A uma temperatura ainda mais baixa, em torno de 43 K, foi verificada a ocorrÃncia da terceira transiÃÃo de fase, que tem como principal caracterÃstica a separaÃÃo de dois modos Raman associados a modos da rede. MudanÃas nos ambientes dos grupos CH3 e do NH3+ durante o resfriamento sÃo discutidas. Um importante aspecto apresentado pelos espectros Raman com o resfriamento da amostra foi o deslocamento da banda de mais baixa energia para menores valores de frequÃncias, semelhantemente ao que ocorre com vibraÃÃes do tipo soft-mode em materiais ferroelÃtricos, embora a frequÃncia do modo no cristal de L-alanina + Ãcido oxÃlico nÃo tenha ido à zero. Baseado nos resultados acima e nos possÃveis sÃtios de simetria ocupados pelas molÃculas atravÃs do grupo O=CC nas diversas fases, sugere-se a seguinte sequÃncia de transiÃÃes de fase D24 para C2h5 para Cs3 para C23, que aconteceriam, respectivamente, nas temperaturas de 250 K, 150 K e 43 K. / In the present word we have studied the effect of temperature on the Raman spectra of crystals of L-alanine + oxalic acid, C3H8NO2+.C2HO4-. Raman spectroscopy measurements were performed on polycrystalline samples at different temperatures varying in the range from room temperature to T = 20 K; a tentative assignment of all normal modes was furnished. In order to help the understanding of the crystal behavior we have also obtained X-ray diffractograms and studied the dependence of lattice parameters through dilatometry as a function of temperature in the 290 K â 93 K range. The three different techniques allowed us to construct a picture of the material under low temperature conditions. As a consequence we have realized that L-alanine + oxalic acid crystal undergoes three phase transitions at low temperatures. The splitting of a band at 90 cm-1 and an anomaly in one of the lattice parameters are the signature for the first phase transition that is observed at 250 K. At 150 K it was observed the appearance of two new bands in the Raman spectrum and, simultaneously, it was observed change in the curves of a and c lattice parameters. Additionally, it was verified the appearance of new peaks in the X-ray diffractogram at the same temperature, characterizing the second phase transition. At a temperature even lower, at about 43 K, it was verified the occurrence of the third phase transition that has as main characteristic the splitting of two bands that are associated to the lattice modes. Changes in the modes associated with CH3 and NH3+ during the cooling is discussed. An important behavior of the crystal with the cooling process was the red shift of the band of lower frequency, similar to the soft-mode vibration of ferroelectric materials, although the frequency of the mode in L-alanine + oxalic acid does not goes to zero. Based on the results on Raman spectroscopy, dilatometry and X-ray diffraction, and on the possible symmetry sites occupied by the molecules through the O=CC group in the various phases, it is suggested the following sequence of phase transitions D24  C2h5  Cs3  C23, which should occur at 250 K, 150 K and 43 K.
|
50 |
Investigação do ácido etanodióico na formação de filmes superficiais sobre zinco e avaliação do efeito destes filmes na resistência à corrosão / Investigation of the ethanedioic acid on the formation of surface films on zinc and evaluation of the effect of these films formed on the corrosion resistanceMarcelo de Oliveira 14 August 2017 (has links)
Um dos métodos mais utilizados para proteção contra a corrosão de aços comuns consiste na proteção catódica com revestimentos metálicos eletroquimicamente mais ativos, que estes. Os revestimentos de zinco são os mais usados para este tipo de proteção. De forma a protegerem o substrato, estes revestimentos devem atuar como anodos de sacrifício, sofrendo corrosão e transformando o substrato de aço em catodo. Todavia, não é de interesse, que o revestimento de zinco apresente altas taxas de corrosão de forma que a proteção contra a corrosão conferida ao aço seja duradoura. Uma das formas mais empregadas para reduzir a velocidade de corrosão do revestimento de zinco é por meio de tratamentos da superfície, por exemplo, por tratamentos de conversão. Os tratamentos de conversão mais eficientes são os que utilizam e geram rejeitos, que contêm íons de cromo hexavalente. Todavia, estes íons são carcinogênicos e tóxicos e, dessa forma, os processos que os utilizam em alguma etapa do tratamento, vêm sofrendo crescentes restrições, já sendo proibidos em países com leis ambientais mais rígidas. Esta é a razão para o crescente interesse e grande investimento em pesquisa tratamentos, que possam resultar em revestimentos com potencialidade para substituir, de forma eficiente e efetiva o uso do cromo hexavalente. Este foi o objetivo do presente trabalho. Neste estudo, foi investigado o efeito de tratamentos, que resultam em camadas de conversão na presença de ácido oxálico e na proteção contra a corrosão da superfície do zinco. Camadas de conversão foram obtidas por imersão de amostras de zinco em soluções de ácido oxálico (ácido etanodióico) com diferentes concentrações. Todas as soluções de tratamento apresentaram elevada acidez e resultaram em ataque da superfície de zinco com formação de revestimento de conversão com diferentes características. Ensaios preliminares de névoa salina foram então realizados para investigar a proteção conferida pelo sistema revestimento de conversão-verniz contra a corrosão do substrato de zinco. Estes ensaios foram decisivos para a escolha da faixa de concentração do banho de conversão com maior potencial para formação de revestimentos de conversão protetores. Os resultados deste ensaio e os de espectroscopia de impedância eletroquímica mostraram que tratamentos em soluções com composição superiores a 10-1 M de ácido oxálico resultaram em camadas muito defeituosas, nas quais o ataque localizado do substrato metálico é favorecido, sendo obtidas impedâncias menores que a superfície do zinco sem qualquer tratamento. Os resultados de XPS mostraram, que os revestimentos de conversão formados em soluções de ácido oxálico na faixa de 10-3 M a 10-1 M são compostos de oxalato de zinco e produtos de corrosão do zinco, especificamente ZnO, Zn (OH)2, e ZnCO3. Já a concentração de 10-1 M de ácido oxálico foi a, que produziu os resultados mais promissores com a formação de um revestimento, que conferiu proteção mais duradoura à superfície do zinco entre os obtidos. As espessuras médias das camadas de conversão de oxalato de zinco formadas em soluções com 10-1 M e 1 M de ácido oxálico, estimadas por FIB, foram respectivamente 600 nm e 300 nm, o que mostra que a concentração de 1 M de ácido causou intenso ataque corrosivo da superfície, enquanto a camada formada em meio com 10-1 M permitiu a deposição de camada mais espessa e mais protetora contra a corrosão do substrato. Os resultados de XPS indicaram a degradação da camada de oxalato de zinco com o tempo de ensaio, porém o ataque desta ao longo do ensaio de corrosão, resulta na formação de simonkolleite, identificada por difração de raios X, para períodos mais longos do ensaio de corrosão, no caso do revestimento formado em solução com 10-1 M em comparação a 1M. A simonkolleite atua por efeito barreira bloqueando os defeitos/porosidade da camada. O crescente acúmulo destes produtos de corrosão com a continuidade do processo corrosivo e a aderência destes ao substrato metálico foi indicada para superfície tratada em solução com 10-1 M de ácido oxálico. Finalmente, foi proposto um modelo para interação entre o revestimento de conversão de oxalato de zinco e os produtos de corrosão em que a retenção dos produtos de corrosão na superfície faz com, que a camada na superfície se torne mais espessa e mais compacta com o tempo de exposição ao ensaio de corrosão. Estas observações explicam o aumento de impedância observado com o tempo de ensaio nesta condição. Os resultados obtidos permitiram concluir, que o revestimento de conversão de oxalato de zinco formado em solução com 10-1 M de ácido oxálico resulta em proteção efetiva do substrato metálico além de apresentar boa aderência com camada de verniz. Estes resultados indicam potencialidade deste tratamento como preparação de superfícies de zinco, que serão recobertas com revestimentos orgânicos (tintas, vernizes ou lacas). / One of the most used methods for protection of common steels is the cathodic protection by galvanic coupling with metallic coatings electrochemically more active than these. Zinc coatings are the most commonly used for this type of protection. In order to protect the metallic substrate, these coatings must act as sacrificial anodes, corroding themselves and converting the steel substrate into cathode. However, it is not appropriate that the zinc coating presents high corrosion rates, so that the corrosion protection conferred to the steel is long-lasting. One of the most commonly employed methods of reducing the corrosion rate of zinc coatings is by surface treatments, such as, conversion treatments. The most efficient conversion treatments to date are those that use hexavalent chromium ions or generate residues containing these ions. However, hexavalent chromium is carcinogenic and toxic and, therefore, the processes that involve their use at some stage of the treatment, are under increasing restrictions, and have already been prohibited in developed countries. This is the reason for the growing interest and great investment in research studies in search for treatments that may result in coatings with the potential to efficiently and effectively replace the use of hexavalent chromium. This was the objective of the present study. In this study, the effect of treatments in oxalic acid solutions that resulted in conversion layers on the corrosion protection of zinc surface has been investigated. Conversion layers were obtained by immersion of zinc samples in solutions of oxalic acid (ethanedioic acid) with different concentrations. All the treatment solutions presented high acidity and resulted in attack of zinc surface and formation of conversion coatings of different characteristics. A layer of varnish was applied and preliminary salt spray tests were then carried out to investigate the corrosion protection provided by the system conversion coating -varnish to the zinc substrate. These tests were decisive for the choice of the conversion bath composition range with greater potentialities for the formation of protective conversion coatings. The results of the salt spray test and of electrochemical impedance spectroscopy (EIS) showed that treatments in solutions with compositions greater than 10-1 M of oxalic acid resulted in very defective conversion layers in which the localized attack of the metallic substrate is favored, and lower impedances than the zinc surface without any treatment were obtained for surfaces treated in these solution. The XPS results showed that conversion coatings formed in oxalic acid solutions in the range of 10-3 M to 10-1 M are composed of zinc oxalate and zinc corrosion products, specifically ZnO, Zn (OH)2, and ZnCO3. The concentration related to the most promising results was 10-1 M and in this solution, the coating formed that promoted the longer lasting protection of the zinc surface among those obtained. The average thicknesses of the zinc oxalate conversion layers formed in solutions with 10-1 M and 1 M of oxalic acid, estimated by FIB, were respectively 600 nm and 300 nm. This result showed that in 1 M of oxalic acid an intense corrosive attack of the zinc surface occurred, while the layer formed in 10-1 M was thicker and more protective against substrate corrosion. The XPS results indicated degradation of the zinc oxalate layer formed in 10-1 M solution with time of exposure to the test solution, but for the protection of the coating lasted for longer periods, comparatively to that formed in 1M solution, once the attack of the first film resulted in formation of simonkolleite, which was identified by X-ray diffraction. Simonkolleite acts by barrier effect blocking defects / porosity in the conversion layer. The increasing accumulation of corrosion products with test time and their adhesion to the metallic substrate was indicated for surface treated in solution with 10-1 M of oxalic acid. Finally, a model has been proposed for the interaction between the zinc oxalate conversion coating and the corrosion products in which the retention of these products on the surface is promoted by the conversion coating and the surface layer becomes thicker and more compact with time of exposure. These observations explain the increased impedance observed with the test time associated to this coating. The obtained results allowed concluding that the conversion coating of zinc oxalate formed in solution with 10-1 M of oxalic acid results in effective protection of the metallic substrate besides promoting good adhesion with a layer of varnish. These results indicate the potential of this treatment as preparation of zinc surfaces that will be covered with organic coatings (paints, varnishes or lacquers).
|
Page generated in 0.0487 seconds