published_or_final_version / abstract / Chemistry / Doctoral / Doctor of Philosophy

No description available.

Commercial sunscreen products are used to protect the skin against hannful ultraviolet (UV) radiation that can induce skin cancer at high dosage. These products contain UV filters that can reflect, scatter or absorb UV light. The chemical UV filters responsible for the absorption of UV radiation can be photochemically modified and as a result reduce the efficacy of the sunscreen formulation. This study focused on the possible use ofplant polyphenols as potential stabilisers of photo-unstable sunscreen chemical absorbers. The photo-instability of some sunscreen absorbers results in radical formation; this prompted the use of the plant, Sutherlandia microphylla (Cancer Bush plant), as a potential photostabiliser. The Cancer Bush plant is used by the indigenous people of South Africa to treat AIDS and cancer. The radical scavenging properties of polyphenolic compounds present in the plant are possibly responsible for the plant's anti-tumour and anti-IDV properties. Therefore, these Cancer Bush polyphenols could possibly be used to photostabilise photo-unstable sunscreen absorbers. Potential polyphenolic photostabilisers from the Cancer Bush plant were extracted by means of various polyphenolic extraction methods. These extracts were analysed by gas chromatography (GC), high-performance liquid chromatography (HPLC), UV spectroscopy and gas chromatography-mass spectrometry (GC-MS). The phenolic content and the antioxidant activity ofthese extracts were investigated by means of the Folin-eiocalteu reagent (FCR) and the diphenylpicrylhydrazyl (DPPH) radical assays respectively. Polyphenols were also extracted from various Rooibos teas and compared with those extracted from the Cancer Bush plant. Both the Cancer Bush and various Rooibos tea extracts were found to contain simple phen~lics and potential polyphenolic compounds. The Cancer Bush extracts as well as the Rooibos tea extracts together with the specific polyphenols, epicatechin and rutin, were assessed for their ability to photostabilise sunscreen absorbers. The photostability of the chemical absorbers in the absence and in the presence of the polyphenol extracts was investigated by UV spectroscopy, by monitoring their absorption spectra during irradiation with solar-simulated radiation. These extracts inhibited the photodegradation of the absorber avobenzone. The photostability of avobenzone is solventIntroduction III dependent hence the investigations were carried out in three solvents, namely, cyclohexane, ethyl acetate and dimethylsulfoxide. Additionally, the cause ofthe instability ofavobenzone in these solvents was investigated by means of DV spectroscopy, HPLC and nuclear magnetic resonance spectroscopy. The oxygen dependency of the photo-instability of avobenzone was also determined. The photo-instability of avobenzone was found to occur as a result of photoisomerisation and!or photodegradation, depending on the solvent. Avobenzone photoisomerised extensively in dimethylsulfoxide and photodegraded appreciably in cyclohexane, whereas both processes occurred to a similar extent in ethyl acetate. Photoisomerisation only occurred in the presence of oxygen whereas photodegradation occurred irrespective of oxygen. The Cancer Bush and various Rooibos tea extracts as well as other polyphenols photostabilised avobenzone in ethyl acetate and dimethylsulfoxide but not in cyclohexane. This photostabilisation effect was potentially due to the radical scavenging ability of polyphenols which prevented the oxygendependent photoisomerisation, but not the oxygen independent photodegradation process from occurring. / Thesis (M.Sc.)-Chemistry-University of KwaZulu-Natal, 2005

The topical application of sunscreens is widely practised to protect healthy and photosensitive skins from the sun. The benzophenone-derived sunscreens, e.g. 2-hydroxy-4-methoxy benzophenone-5-sulphonic acid (or benzophenone-4) and 2-hydroxy-4-methoxy benzophenone (or benzophenone-3), were ranked as the second and third most frequently used sunscreens, respectively, by the United States Food and Drug Administration (FDA) in 1996. These sunscreens are categorised as being 'safe' and 'effective'. However, it is well known that the parent compound, benzophenone, undergoes rapid hydrogen abstraction reactions on irradiation and is an extremely powerful radical generator. In addition, benzophenone has been shown to be a potent photosensitizer of thymine dimers in deoxyribose nucleic acid (DNA). More astounding to the sunscreen industry is the recent discovery that a group of non-steroidal anti- inflammatory drugs (NSAIDs) having the benzophenone backbone, e.g. ketoprofen, not only form thymine dimers when irradiated with DNA in vitro, but also photosensitize double stranded supercoiled DNA making it prone to single-strand break formation. Both these lesions, if unrepaired, may contribute to mutagenesis, carcinogenesis, inherited disease and eventually cell death. The purpose of this investigation was to determine if a group of benzophenone-derived sunscreen agents has the ability to photosensitize the cleavage of DNA, whereby supercoiled DNA is converted to the relaxed circular and linear forms. The group of UV absorbers investigated in this study included benzophenone-4, benzophenone-3 , 2,4 dihydroxybenzophenone (or benzophenone-l), 2,2'-dihydroxy-4,4'-dimethoxy benzophenone sulphonic acid (or trade name Uvinul DS49) and 2-phenylbenzimidazole-5-sulphonic acid (or trade name Eusolex 232). For comparison the parent compound benzophenone and the NSAID ketoprofen, a well-known photocleaver, were also studied. Buffered aqueous solutions of the benzophenones were irradiated in the presence of DNA at wavelengths greater than 300 nm with an Osram 500 W/2 high-pressure mercury lamp in conjunction with a 10 mm thick Pyrex filter. The irradiated samples were analysed for DNA cleavage by agarose gel electrophoresis and for DNA binding by fluorescence spectroscopy. The photostability of the UV absorbers was also investigated. In addition, computational studies were conducted to obtain the lowest energy geometrical structures of these UV absorbers and hence determine if intercalation of these UV absorbers with DNA was possible. From the photostability experiments conducted, it is apparent that the benzophenone-based UV absorbers were stable to photodecomposition when irradiated with UV light. They behaved in a manner different from their parent compound benzophenone, and from ketoprofen, where substantial photodegradation occurred upon UV irradiation. This is indicative of the rapid photoreactivity of the benzophenone backbone. The relative photostability of the UV absorbers was not anticipated and was attributed to the substituents present on the benzophenone backbone. The agarose gel electrophoresis experiments however clearly showed that benzophenone, ketoprofen, benzophenone-l, Uvinul DS49 and Eusolex 232 cleave ?X174 DNA when irradiated with UV light at wavelengths greater than 300 nm, while benzophenone-3 and benzophenone-4 did not. For these UV absorbers with the exception of benzophenone-3 and benzophenone-4, the number of single strand breaks in the DNA increased compared to when it was irradiated in their absence. In addition, the supercoiled DNA was converted to the relaxed circular and linear forms, the latter of which was undetected in the absence of the UV absorbers. Binding of benzophenone, ketoprofen, benzophenone-l and Uvinul DS49 to calf thymus DNA was also detected by the fluorescence spectroscopy technique. However, this was not observed for Eusolex 232, benzophenone-3 and benzophenone-4, since they did not compete with ethidium bromide for DNA binding sites. Where DNA cleavage did occur, the mechanism of this interaction had to be determined hence the motivation for the computational studies. From computational studies using PM3 semi- empirical calculations, it was determined that the benzophenone-based UV absorbers investigated, apart from Eusolex 232, displayed non-planar geometrical structures. This indicated that DNA intercalation of these sunscreen agents with DNA would at best be very limited, since only one half of the molecule could possibly interact with the bases of DNA. For benzophenone, ketoprofen, benzophenone-l and Uvinul DS49, photosensitised type I and type II processes involving triplet energy transfer reactions has been identified in literature as being responsible for DNA cleavage. It was determined by ab initio calculations that Eusolex 232 exists in a planar structure unlike the other UV absorbers mentioned above that were non- planar. It was concluded that although Eusolex 232 has the ability to intercalate with the base pairs of DNA, it does not do so, as shown by its lack of binding to calf thymus DNA by the fluorescence spectroscopy study. Literature alludes to photooxidation by singlet oxygen in single stranded DNA via the type II reaction and type I electron transfer reactions in double stranded DNA as the mechanism responsible for DNA cleavage induced by Eusolex 232. / Thesis (M.Sc.)-University of Natal, Durban, 2003.

<p>The ability of photocatalytic nanoparticles (NPs) to produce reactive oxygen species (ROS) has inspired research into several new applications and technologies, including water purification, contaminant remediation, and self-cleaning surface coatings. As a result, NPs continue to be incorporated into a wide variety of increasingly complex products. With the increased use of NPs and nano-enabled products and their subsequent disposal, NPs will make their way into the environment. Currently, many unanswered questions remain concerning how changes to the NP surface chemistry that occur in natural waters will impact reactivity. This work seeks to investigate potential influences on photoreactivity – specifically the impact of functionalization, the influence of anions, and interactions with biological objects - so that ROS generation in natural aquatic environments may be better understood.</p><p>To this aim, titanium dioxide nanoparticles (TiO2) and fullerene nanoparticles (FNPs) were studied in terms of their reactive endpoints: ROS generation measured through the use of fluorescent or spectroscopic probe compounds, virus and bacterial inactivation, and contaminant degradation. Physical characterization of NPs included light scattering, electron microscopy and electrophoretic mobility. These systematic investigations into the effect of functionalization, sorption, and aggregation on NP aggregate structure, size, and reactivity improve our understanding of trends that impact nanoparticle reactivity.</p><p>Engineered functionalization of FNPs was shown to impact NP aggregation, ROS generation, and viral affinity. Fullerene cage derivatization can lead to a greater affinity for the aqueous phase, smaller mean aggregate size, and a more open aggregate structure, favoring greater rates of ROS production. At the same time however, fullerene derivatization also decreases the 1O2 quantum yield and may either increase or decrease the affinity for a biological surface. These results suggest that the biological impact of fullerenes will be influenced by changes in the type of surface functionalization and extent of cage derivatization, potentially increasing the ROS generation rate and facilitating closer association with biological targets.</p><p>Investigations into anion sorption onto the surface of TiO2 indicate that reactivity will be strongly influenced by the waters they are introduced into. The type and concentration of anion impacted both aggregate state and reactivity to varying degrees. Specific interactions due to inner sphere ligand exchange with phosphate and carbonate have been shown to stabilize NPs. As a result, waters containing chloride or nitrate may have little impact on inherent reactivity but will reduce NP transport via aggregation, while waters containing even low levels of phosphate and carbonate may decrease “acute” reactivity but stabilize NPs such that their lifetime in the water column is increased.</p><p>Finally, ROS delivery in a multicomponent system was studied under the paradigm of pesticide degradation. The presence of bacteria or chlorpyrifos in solution significantly decreased bulk ROS measurements, with almost no OH detected when both were present. However, the presence of bacteria had no observable impact on the rate of chlorpyrifos degradation, nor chlorpyrifos on bacterial inactivation. These results imply that investigating reactivity in simplified systems may significantly over or underestimate photocatalytic efficiency in realistic environments, depending on the surface affinity of a given target.</p><p>This dissertation demonstrates that the reactivity of a system is largely determined by NP surface chemistry. Altering the NP surface, either intentionally or incidentally, produces significant changes in reactivity and aggregate characteristics. Additionally, the photocatalytic impact of the ROS generated by a NP depends on the characteristics of potential targets as well as on the characteristics of the NP itself. These are complicating factors, and the myriad potential exposure conditions, endpoints, and environmental systems to be considered for even a single NP highlight the need for functional assays that employ environmentally relevant conditions if risk assessments for engineered NPs are to be made in a timely fashion so as not to be outpaced by, or impede, technological advances.</p> / Dissertation

In this thesis, a joint experimental and theoretical study of the dynamics of atom- molecule collisions will be presented. The focus of this study will be conducted towards the precise, quantitative theoretical description of the collision dynamics in terms of the vectors <strong>k</strong>, <strong>k'</strong>, <strong>j</strong>, and <strong>j'</strong> (the incoming and outgoing relative momenta associated with the collision, and the initial and final rotational angular momentum of the target diatom respectively) that define the collision, and on the experimental measurement of these vector correlations. Chapter 1 is introductory, providing an overview of the field of reaction dynamics, and the experimental and theoretical methods that exist to treat the collisions of atoms and molecules. This work focusses on the collisions of the spherically symmetric rare gas atoms Ar and He with the open-shell heteronuclear diatomic radicals NO and OH. In particular, the fully quantum state-to-state resolved differential cross-sections for the collisions of NO(X) with Ar (reflecting the <strong>k</strong> - <strong>k'</strong> vector correlation), and the collisional cross-sections for the depolarisation of the rotational angular momenta of the NO(A) and OH(A) radicals (reflecting the <strong>j</strong> - <strong>j'</strong> vector correlation) have been determined experimentally and theoretically, and the results have been discussed and interpreted in terms of the mechanistic aspects of the collision dynamics, and the features of the potential energy surface that give rise to these. In Chapter 2, the atom-molecule systems that constitute the subject of this work will be introduced in detail. The close-coupled quantum mechanical and quasi-classical trajectory scattering calculations performed as part of this work will be discussed in greater detail, providing a greater insight into molecular scattering theory. The explicit calculation of the quantities of interest (most significantly the differential cross-section, and the tensor/depolarisation cross-sections) will be presented for the quasi-classical and quantum cases, offering the most transparent definitions of these quantities. Finally the mathematical description of the spatial probability distribution of a single vector, a pair of correlated vectors, and three correlated vectors is described in detail, including a discussion of the quantum mechanical nature of the vectors in question. Chapter 3 describes the experimental measurement of the differential cross-sections for the collisions of NO(X) with Ar. A hexapole was used to select uniquely those NO molecules in the |&Omega; = 0.5; j = 0.5, f> quantum state, allowing full experimental quantum state-to-state selection for the first time. A crossed molecular beam apparatus with (1+1') resonantly enhanced multi-photon ionisation detection coupled with velocity mapped ion- imaging was employed to measure the differential cross-section, and the details of the experimental set-up are provided. The accurate extraction of the true, centre of mass frame differential cross-section from the laboratory frame information yielded by the experiment is something of an involved process, and much of this Chapter will be concerned with the development of a Monte Carlo method to achieve this end. In Chapter 4, the experimental and theoretical fully quantum state-to-state resolved differential cross-sections for the collisions of NO(X) with Ar are presented, having been measured for the first time. Full resolution of the initial parity of the rotational wave- function of the NO molecule has enabled the observation of parity dependent structures within the differential cross-section, and the origin of these structures has been investi- gated, employing quasi-classical, quantum mechanical and semi-classical methods in order to elucidate the mechanism by which they arise. Chapter 5 introduces the measurement of the collisional depolarisation of the rotational angular momentum of the diatom. Rate constants for the collisional depolarisation of <strong>j</strong> were measured by monitoring the time dependence of the amplitude of Zeeman and hyperfine quantum beats in the (1+1) laser induced fluorescence decays of an ensemble of NO(A) or OH(A) radicals in the presence of a series of background pressures of a collision partner. The creation and subsequent evolution of the polarisation of <strong>j</strong> induced by the absorption of polarised laser light is described, and the magnitude of this polarisation is linked to the amplitude of the quantum beat in the laser induced fluorescence decay. The extraction of the depolarisation cross-sections from the raw experimental data is discussed, and a Monte Carlo simulation of the experiment is described to account for any additional unwanted experimental factors that may contribute to the loss of polarisation of <strong>j</strong>. A formalism is also introduced that makes use of the tensor opacities to recover spin- rotation conserving and spin-rotation changing open-shell rotational energy transfer and depolarisation cross-sections from the intrinsically closed shell quasi-classical trajectory scattering calculations. In Chapter 6, the experimentally determined collisional depolarisation cross-sections for the collisions of NO(A) with He/Ar, and of OH(A) with Ar at collision energies of 39 meV/757meV are presented along with their theoretical counterparts. The relative magnitudes of the cross-sections are rationalised in terms of the potential energy surface over which the collision takes place, and the importance of spin-rotation conserving and spin-rotation changing transitions in the depolarisation process is assessed. A detailed study of the ensemble of quasi-classical trajectories is performed to determine the character of the various atom-molecule collisions, and to identify which conditions lead to the most efficient depolarisation of <strong>j</strong>. The relative importance of the potential energy surface and the collision kinematics is also assessed at this point. The results presented in this thesis thus investigate two complementary expressions of the collision dynamics, the <strong>k</strong> - <strong>k'</strong> and <strong>j</strong> - <strong>j'</strong> vector correlations, and encompass a variety of collision partners exhibiting vastly differing collision characteristics. As such, this work serves as an illustrative overview of atom-molecule scattering dynamics, containing both experimental and theoretical reflections of the collision dynamics, and relating this information back to the fundamentals of scattering theory.

In this thesis, resonance enhanced multiphoton ionisation (REMPI) in combination with time-of-flight mass spectrometry (TOF-MS) has been used to detect nascent photofragments resulting from the UV dissociation of a variety of small molecules. The translational anisotropy and angular momentum polarisation of these photofragments has been measured and used to elucidate the underlying photodissociation dynamics. Firstly, the photodissociation of NO₂ at 320nm has been investigated and the vector correlations of the nascent NO photofragments have been measured in terms of a set of semi-classical bipolar moments. The measured angular momentum alignment is found to be consistent with an impulsive model for the dissociation, with <b>&mu;</b> and <b>&nu;</b> in the same molecular plane and both preferentially perpendicular to <b>J</b>, whilst angular momentum orientation measurements provide evidence for an additional torque due to the O-N-O bond opening during dissociation. These measurements were taken using a rotationally cooled, skimmed molecular beam and significant deviations were found between the bipolar moments measured using this source and previous measurements using a rotationally hotter source. The effect of parent molecular rotations on the measured bipolar moments has been quantified and successfully used to explain these deviations. The photodissociation of Cl₂ has been studied in the wavelength region (320-350)nm. UV absorption in this wavelength region may result in two dissociation channels, (Cl+Cl) and (Cl+Cl*), and the angular momentum polarisation of both the Cl(²P_3/2) and Cl*(²P_1/2) photofragments has been measured. This angular momentum polarisation has been reported in terms of a polarisation parameter formalism which, together with the measured translational anisotropies, has been used to determine the different potential energy surfaces contributing to the dissociation process. Translational anisotropy measurements of the Cl(²P_3/2) fragments have shown that, for the ground-state channel, dissociation results from a pure perpendicular transition to the C state, whilst alignment measurements show that non-adiabatic transitions to the A state are significant at large internuclear separations. The measured alignment parameters are found to be relatively constant for all dissociation wavelengths and are consistent with theoretical predictions. Translational anisotropy measurements of the Cl(2P_1/2) photofragments show that, for the excited-state channel, dissociation occurs following a mixed parallel and perpendicular excitation to the B and C states respectively and the interference between these two dissociation pathways has been shown to result in angular momentum orientation. The predissociation dynamics of the C ³&Pi;_g (&nu;=0) and (&nu;=1) Rydberg states of O₂ has been extensively studied. The translational anisotropy and angular momentum alignment of the O(³P) and O(¹D) photofragments resulting from this predissociation has been measured in terms of a polarisation parameter formalism, which has been extended for a two-photon dissociation process. Measurements have been taken at various fixed wavelengths within the two bands in order to investigate the differences in the predissociation dynamics of intermediate levels with different values of |&Omega;|(=0,1,2 in this case). The translational anisotropy is found to be dependent on the dissociation wavelength with the variations found to be consistent with rotational depolarisation due to the long lifetime of the excited C state. All photofragments have been found to be aligned, with the relationship between the measured O(³P) and O(¹D) alignment being found to be consistent with a diabatic model of the dissociation. In addition, all photofragments are found to display coherent orientation resulting from interference between two possible two-photon absorption pathways. The measured orientation is affected by rotational depolarisation due to the long lifetime of the excited C state; once this effect is accounted for the orientation is found to be nearly constant over all dissociation wavelengths. The origin of the coherent orientation is attributed to two-photon absorption to different spin-orbit components of the C state.

Une grande variété de curcuminoïdes Cs et de tétrahydrocurcuminoïdes THCs a été synthétisée et leurs propriétés antioxydantes ont été étudiées en détail par la méthode du radical DPPH°. Pour la première fois, il a été montré que les propriétés antioxydantes supérieures des THCs par rapport à leurs homologues curcuminoïdes sont dues à la présence d’atomes d’hydrogène benzyliques dans les THCs. L’association de THCs avec un biopolymère, le chitosane, a permis l’élaboration de films à propriétés antioxydantes et antibactériennes. Des interactions entre les THCs et le chitosane ont été mises en évidence par spectroscopie d’absorption UV-visible. Les THCs et plus particulièrement la tétrahydrocurcumine, se sont révélés capables à la fois d’inhiber le développement de Fusarium proliferatum, champignon qui s’attaque aux céréales, et de limiter la production de mycotoxines issues de cette souche. / A large variety of curcuminoids Cs and tetrahydrocurcuminoids THCs was synthesized and their antioxidant properties were studied in detail by the radical DPPH° method. For the first time, it was shown that the higher antioxidant properties of THCs compared to their counterparts’ curcuminoids are due to the presence of benzylic hydrogen atoms in THCs. The association of THCs with a biopolymer chitosan, allowed the preparation of films presenting antioxidant and antibacterial properties. Interactions between THCs and chitosan were evidenced by UV-visible absorption spectroscopy. THCs and more particularly tetrahydrocurcumin inhibited development of Fusarium proliferatum fungi in cereals, and limited the production of associated mycotoxins.

The behavior of Deepwater Horizon crude oil and other sources of oil were investigated when exposed to sunlight in aquatic systems under environmentally relevant conditions. This research decoupled the abiotic and biotic weathering modifications of oil by focusing solely on the photochemical transformations of oil in aquatic systems. Photochemical rates and mechanisms were measured through the determination of reactive transients. Total hydroxyl radical formation was studied using high benzoic acid concentrations and varying exposure time. Titanium dioxide (TiO2) nanomaterials were added to the system in an effort to determine if the photocatalyst would enhance oil photodegradation. Photochemical production of singlet oxygen from thin oil films over seawater and pure water was measured with furfuryl alcohol as a selective chemical probe. The loss of furfuryl alcohol and the formation of 6-hydroxy(2H)pyran-3(6H)-one were monitored. Photochemical production of organic triplets from 6 different compositions of petroleum was measured through the cis-trans isomerization of 1,3 pentadiene in Gulf water. The data correlate very well with previously measured singlet oxygen concentrations. The energies were measured in the range of 280-300 kJ/mol. Macondo Well Oil from the Deepwater Horizon (DWH) rig was mixed with pure water and seawater and irradiated with simulated sunlight. After irradiation, the water-soluble organics (WSO) from the dark and irradiated samples were extracted and characterized by ultrahigh resolution Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS). Liquid-liquid extraction yielded two fractions from dark and irradiated water/oil mixtures: acidic WSOs (negative-ion electrospray (ESI)), and base/neutral WSOs (positive-ion ESI). These fractions were analyzed by FT-ICR MS to catalogue molecular-level transformations that occurred to oil-derived WSOs after solar irradiation. The increased abundance of higher-order oxygen classes in the irradiated samples relative to the dark samples indicates that photooxidized components of the Macondo crude oil become water-soluble after irradiation. Time series studies were performed to observe the changes in WSO composition. The predominance of higher-order oxygen classes indicates that multiple photochemical pathways exist that result in oxidation of petroleum compounds. More oxygenated compounds were observed in the WSO acid fraction of oils with higher API gravity.

Sintetizou-se uma nova diimida naftálica difosfônica, a N, N-bis(2-fosfonetil)naftaleno diimida (DPN), pela reação do dianidrido 1,4,5,5-naftálico com o ácido 2-aminoetil-fosfônico. Essa molécula foi caracterizada por H-RMN, micro-análise, titulação potenciométrica e análise de fosfato. Através de estudos fotofísicos e fotoquímicos do DPN em solução verificou-se que essas moléculas encontravam-se na forma monomérica em água e na forma de agregados em solventes orgânicos. Verificou-se que o rendimento quântico de fluorescência &#934;f dessa molécula é dependente do pH do meio, uma vez que ocorre diminuição do &#934;f com aumento do pH. Por estudos com fotólise de relâmpago e por experimentos de lente térmica resolvida no tempo, verificou-se que a diminuição do &#934;f com aumento do pH. Por estudos com fotólise de relâmpago e por experimentos de lente térmica resolvida no tempo, verificou-se que a diminuição &#934;f é causada principalmente por um aumento no cruzamento intersistema, de singleto a tripleto. Multicamadas à base de zircônio (Mallouk et al. 1987) do DPN foram obtidas substratos como vidro, silício e ouro. O crescimento de filmes em vidro foi acompanhado por espectroscopia de absorção e em filmes sobre o silício por elipsometria. Sobre a superfície de ouro, foram estudadas as propriedades de oxido-redução do filme por voltametria cíclica. Por estudos fotofisicos desses filmes depositados em vidro, verificou-se que os mesmos eram fotoativos, formando produtos fotoquímicos por processos radicalares. Por outro lado, quando se preparou micro-cristais, pricipitando-se o radical do DPN com o zircônio em solução, observou-se por espectroscopia de ressonância de spin eletrônico (EPR) que estas estruturas micro-cristalinas estabilizavam o radical do DPN em presença de ar por vários dias. / The new diimide N, N\' -bis-(2-phosphoethyl)-1,4,5,8-naphtalenediimide (DPN) was synthesized by reaction of 2-aminoethylphosphonic acid with the compound 1,4,5,8-naphatalene tetracarboxylic dianhydride. This molecule was characterized by 1H-RMN, elemental analysis, potentiometric titration and phosphorus analysis. By photophysical and photochemical studies of DPN in solution, it was verified that DPN is in monomeric form in aqueous solution and DPN is in an aggregated state in organic solvents. When the fluorescence spectra in aqueous media show a sharp decrease in the fluorescence quantum yield (&#934;f) with the increase in pH. By laser flash photolysis and thermal lensing, it was verified that this reduction of &#934;f with the increase pH can be attributed to an increment in the intersystem crossing processes when the pH increased. The zirconium phosphonate thin films formed from 1,4,5,8-naphtalene diimides were assembled on quartz, borosilicate glass (BK7), silicon or gold. The film growth was followed by absorption spectroscopy on quartz and BK7 and by ellipsometry on silicon substrate. Toe oxidation and reduction properties of the films were studied by cyclic voltammetry of films deposited on gold. Photophysical and photochemical data revealed that the films were photosensitive, giving rise to products derived by radicalar reactions. On the other hand, when the DPN radical was precipitated with Zr4+ in solution, micro-crystals were obtained which stabilized the radical in the presence of air for several days.