Orientador: Gustavo Franco Barbosa / Resumo: O desempenho de tecidos e órgãos de todo organismo vivo, fica naturalmente comprometido com o passar dos anos, e se faz necessário intervenções médicas para eventuais reconstituições ou reparações de tecidos acometidos e danificados por doenças ou lesões. Neste contexto, a Engenharia Tecidual tem trabalhado de maneira interdisciplinar nos campos das Engenharias, Biologia e Medicina, e tem trazido grandes evoluções e opções aos já difundidos transplantes e enxertos ósseos. Nesse âmbito, impulsionado pelas recentes aplicações da tecnologia da manufatura aditiva, novos polímeros termoplásticos biodegradáveis têm sido utilizados com sucesso. Dessa forma, este trabalho de pesquisa tem como propósito principal desenvolver scaffolds 3D mimetizando o osso trabecular, aliando as propriedades de biocompatibilidade e biodegradabilidade do já difundido e certificado PLA (ácido polilático). Assim, os scaffolds 3D de PLA em sua versão comercial, são recobertos com látex natural extraído da Hevea brasiliensis por meio da técnica dip-coating, afim de otimizar a biocompatibilidade, promovendo condições para a angiogênese e proporcionando condições para a migração, diferenciação e proliferação de tecido ósseo, características estas que foram detectadas em estudos recentes deste material com resultados promissores. Com auxílio de softwares CAD, foi possível desenvolver geometrias com interconectividade estruturada, seguidos de definição de parâmetros de processamento e fabricação utilizando a t... (Resumo completo, clicar acesso eletrônico abaixo) / Mestre

A small college in the Midwestern United States has a prior learning assessment (PLA) program that has never been evaluated from the perspective of the faculty and staff. The problem is that campus leaders have a limited understanding of faculty and staff knowledge and their role in the PLA program. The study was approached from an appreciative perspective while exploring faculty and staff knowledge and perceptions related to PLA to address 3 research questions. The first 2 research questions were developed to better understand how faculty and staff describe their understanding of the PLA program and what they envision for the program. The final research question was a reflection of the descriptive data collected from the responses to the first 2 research questions. This formative program evaluation included an open-ended survey of 36 faculty and staff as self-selected to participate in the study from the entire faculty and staff population. Additionally, formal documents, including catalog, forms, and internet references associated with PLA were evaluated. Analysis was performed through manual methods including axial coding for the surveys, descriptive and axial coding for the formal documents, followed by thematic analysis. Faculty and staff reported that they had a limited understanding of the institution's PLA program and said they would like to have a stronger program than what they have now. Key results from the analysis indicate that the institution can improve the PLA program by clarifying the purpose, enhancing the policy supporting the program, improving processes, and further promoting the program. Positive social change can occur through the college developing improved PLA practices, thus helping to support students' education endeavors.

Poly(lactic acid) (PLA) is a polymer chain consisting of repeating units of lactic acid (LA) used in various biomedical applications because of its biocompatible features. It is commonly used as a subdermal filler and constitutes as the main ingredient in SculptraR, which is a collagen regenerating filler used to treat lipoatrophy of the cheeks or to rejuvenate the skin. The presence of macrophages triggers a foreign body reaction in response to PLA, which in turn prompts fibroblasts to gradually increase collagen fibers in the dermis. This literature study investigates how physical properties such as Mw, morphology, stereochemistry as well as chemical properties, influence the biological response and degradation of PLA. Additionally, a comparison of other bio stimulants, substituents and copolymers were performed. The aim of this study was constructed in collaboration with Galderma. All aspects that were taken into consideration affected the biological response and degradation to some extent. The degradation of the PLLA microspheres has a noticeable correlation to the biological immune response. An increase in the Mw and degree of crystallinity results in a decrease in degradation rate. Morphology greatly influences the immune response and particle size is vital for the degradation as well as biostimulation. The most suitable stereoisomer of PLA is the (L)-form based on both biological response and degradation. Decomposition of PLLA varies depending on the Mw which is affected by the pH of the surrounding environment. Compared to other substances used in biodegradable products, PLLA is regarded as the most auspicious for a durable result. PDLLA has desirable biological responses but is degraded too fast. PDLA is not suitable as a dermal filler due to its inflammatory response and bad collagen regeneration.

No description available.

The purpose of this study is to examine the position and use of an upper extremity prosthetic simulator on non-amputees. To see how a 3D printed prosthetic simulator can be optimized to serve the user correctly and accurately. In addition, this study examines the improvement of the Hosmer 5X Prosthetic Hook with the addition of newly designed trusses on to the prosthetic, as well as utilizing a new manufacturing method known as 3D printing. These topics are important because there is no standardized prosthetic simulator for schools and research facilities to use. Off the shelf prosthetic simulator cost upwards of $2000, often too expensive for early stage research. By optimizing the Hosmer 5X Prosthetic Hook with 3D printing, this new opportunity could allow amputees, from a range of income classes, to have access to a wide variety of prosthetics that are strong enough to support everyday living activities. A low-cost prosthetic that is easily distributable and accessible can give people a chance to regain their independence by giving them different options of efficient prosthetic devices, without having to spend so much. The devices in this project were design and analyzed on SOLIDWORKS, 3D scanned on the Artec Space Spider, and surfaced on Geomagic Wrap. Key results include developing a low-cost, robust prosthetic simulator capable of operating a Hosmer 5X Prosthetic hook, as well as developing a lighter version of the Hosmer 5X Prosthetic Hook that is more cost efficient and easily obtainable to the population around the world.

Yes / Highly oriented poly(lactic acid) (PLA)/thermoplastic polyurethane (TPU) blends were fabricated through solid hot stretching technology in an effort to improve the mechanical properties and blood biocompatibility of PLA as blood-contacting medical devices. It was found that the tensile strength and modulus of the blends can be improved dramatically by stretching. With the increase of draw ratio, the cold crystallization peak became smaller, and the glass transition and the melting peak moved to high temperature, while the crystallinity increased, and the grain size of PLA decreased, indicating of the stress-induced crystallization during drawing. The oriented blends exhibited structures with longitudinal striations which indicate the presence of micro-fibers. TPU phase was finely and homogeneously dispersed in the PLA, and after drawing, TPU domains were elongated to ellipsoid. The introduction of TPU and orientation could enhance the blood compatibility of PLA by prolonging kinetic clotting time, and decreasing hemolysis ratio and platelet activation.

Yes / Highly-oriented poly (lactic acid) (PLA) with bionic fibrillar structure and micro-grooves was fabricated through solid hot drawing technology for further improving the mechanical properties and blood biocompatibility of PLA as blood-contacting medical devices. In order to enhance the melt strength and thus obtain high orientation degree, PLA was first chain branched with pentaerythritol polyglycidyl ether (PGE). The branching degree as high as 12.69 mol% can be obtained at 0.5 wt% PGE content. The complex viscosity, elastic and viscous modulus for chain branched PLA were improved resulting from the enhancement of molecular entanglement, and consequently higher draw ratio can be achieved during the subsequent hot stretching. The stress-induced crystallization of PLA occurred during stretching, and the crystal structure of the oriented PLA can be attributed to the α′ crystalline form. The tensile strength and modulus of PLA were improved dramatically by drawing. Chain branching and orientation could significantly enhance the blood compatibility of PLA by prolonging clotting time and decreasing hemolysis ratio, protein adsorption and platelet activation. Fibrous structure as well as micro-grooves can be observed for the oriented PLA which were similar to intimal layer of blood vessel, and this bionic structure was considered to be beneficial to decrease the activation and/or adhesion of platelets.

Yes / Highly-oriented poly (lactic acid) (PLA) with bionic micro-grooves was fabricated through solid hot drawing technology for further improving the mechanical properties and blood biocompatibility of PLA. In order to enhance the melt strength and thus obtain high orientation degree, long chain branched PLA (LCB-PLA) was prepared at first through a two-step ring-opening reaction during processing. Linear viscoelasticity combined with branch-on-branch (BOB) model was used to predict probable compositions and chain topologies of the products, and it was found that the molecular weight of PLA increased and topological structures with star like chain with three arms and tree-like chain with two generations formed during reactive processing, and consequently draw ratio as high as1200% can be achieved during the subsequent hot stretching. With the increase of draw ratio, the tensile strength and orientation degree of PLA increased dramatically. Long chain branching and orientation could significantly enhance the blood compatibility of PLA by prolonging clotting time and decreasing platelet activation. Micro-grooves can be observed on the surface of the oriented PLA which were similar to the intimal layer of blood vessel, and such bionic structure resulted from the formation of the oriented shish kebab-like crystals along the draw direction.

A high expression of stromal PDGFRβ is known to be a poor prognosis marker in several solid tumor types. However, the role of stromal PDGFRβ for non-small cell lung cancer (NSCLC) patients remains unclear. Therefore, we investigated the activation status of PDGFRβ with proximity ligation assay (PLA) by studying the interaction between the receptor and GRB2, one of PDGFRβs downstream signaling molecules. The main aim is in this study is to investigate the activation status of stromal PDGFRβ in NSCLC tissues and look into its clinical relevance for lung cancer patients. Our data revealed that PDGFRβ activation status did not affect overall survival, and was not associated to smoking, sex, age or stage of cancer. PDGFRβ activation status was higher in the histological subgroup of squamous cell carcinoma-patients compared to the adenocarcinoma subgroup. The PDGFRβ activation status showed a clear correlation to the general expression level of PDGFRβ investigated by immunohistochemistry (IHC). The correlation also showed that a high activation status required a high general expression, indicating a specific pipeline.

3D-printing is a new and upcoming manufacturing technique that can significantly reduce time and material losses in production. Fused deposition modeling (FDM) is one of the most commonly used 3D-printing methods for processing conventional thermoplastic polymers. To reduce the printing time and usage of material via FDM technology, a user typically specifies infill density. Therefore, it is important to understand how this printing parameter affects the fire and mechanical properties of the 3D-printed object.  This study aims to investigate the effect of various infill densities on mechanical and fire properties of polylactic acid (PLA) composites produced by FDM 3D-printing technology. PLA composites of five different infill densities were 3D-printed: 20%, 40%, 60%, 80% and 100%. The samples for all tests were designed in AutoCAD and then imported into the slicing software, Ultimaker Cura. The 3D-printer used for printing was the Ultimaker S3 which uses FDM technology. To test the fire and mechanical behavior of 3D-printed PLA composites three tests were conducted: cone calorimeter test, tensile test and UL-94 flammability test. The cone calorimeter testing was done using the incident radiation of 35 kW/m2. The results showed that the trend of HHR curves of all infill densities are akin to each other, though the peak heat release rate and total heat released increases with higher infill density. Time to ignition was also longer for samples with higher infill density. Tensile testing was conducted according to the ASTM D638 standard. The results showed that with increasing infill density mechanical properties improved, with 100% infill density having the highest tensile strength (58.15 MPa) and elastic modulus (1472.1 MPa). From the UL-94 test results no difference in flammability could be observed. Every sample had no rating, which implies that PLA specimens of all infill densities are very flammable, with long afterflame and heavy flammable dripping. The study concludes that among the examined infill densities, no ideal percentage of infill density could be found. Requirements based on application will determine what infill density is most appropriate. Nevertheless, the data collected can hopefully provide a useful reference in designing and manufacturing 3D-printed PLA composites.