Spelling suggestions: "subject:"packetswitched"" "subject:"packetswitch""
1 |
Modelling and analysis of computer communication networks with random or semidynamic routingGeorgatsos, Panagiotis H. January 1989 (has links)
No description available.
|
2 |
Methods of congestion control for adaptive continuous mediaTater, Shalini January 2002 (has links)
No description available.
|
3 |
Evolving Range and DISA Networks Using Pseudo WireMerritt, Joseph 10 1900 (has links)
ITC/USA 2007 Conference Proceedings / The Forty-Third Annual International Telemetering Conference and Technical Exhibition / October 22-25, 2007 / Riviera Hotel & Convention Center, Las Vegas, Nevada / The Eastern and Western Ranges along with DISA share a similar vision around Net-Centricity
such that "Anyone, anywhere can get to any data source and exploit the information they are
authorized to access." Their legacy infrastructure is built around TDM and ATM transport
networks, which are link based and connection oriented. To achieve the vision the infrastructure
must evolve towards a packet switched network (PSN) that is meshed based. Consequently, a
means to interwork non-IP enabled services is required. Pseudo Wire protocol encapsulation
provides the means for extending telemetry, data, voice, and video services in native formats
over Ethernet, IP, and MPLS networks in a reliable way that delivers greater operational
efficiency and a smooth migration to a single converged network.
|
4 |
Benchmarking Traffic Control Algorithms on a Packet Switched NetworkGoldberg, Benjamin 01 January 2015 (has links)
Traffic congestion has tremendous economic and environmental costs. One way to reduce this congestion is to implement more intelligent traffic light systems. There is significant existing research into different algorithms for controlling traffic lights, but they all use separate systems for performance testing. This paper presents the Rush Hour system, which models a network of roadways and traffic lights as a network of connected routers and endnodes. Several traffic switching algorithms are then tested on the Rush Hour system. As expected, we found that the more intelligent systems were effective at reducing congestion at low and medium levels of traffic. However, they were comparable to more naive algorithms at higher levels of traffic.
|
5 |
Reliability for Hard Real-time Communication in Packet-switched NetworksGanjalizadeh, Milad January 2014 (has links)
Nowadays, different companies use Ethernet for different industrial applications. Industrial Ethernet has some specific requirements due to its specific applications and environmental conditions which is the reason that makes it different than corporate LANs. Real-time guarantees, which require precise synchronization between all communication devices, as well as reliability are the keys in performance evaluation of different methods [1]. High bandwidth, high availability, reduced cost, support for open infrastructure as well as deterministic architecture make packet-switched networks suitable for a variety of different industrial distributed hard real-time applications. Although research on guaranteeing timing requirements in packet-switched networks has been done, communication reliability is still an open problem for hard real-time applications. In this thesis report, a framework for enhancing the reliability in multihop packet-switched networks is presented. Moreover, a novel admission control mechanism using a real-time analysis is suggested to provide deadline guarantees for hard real-time traffic. A generic and flexible simulator has been implemented for the purpose of this research study to measure different defined performance metrics. This simulator can also be used for future research due to its flexibility. The performance evaluation of the proposed solution shows a possible enhancement of the message error rate by several orders of magnitude, while the decrease in network utilization stays at a reasonable level.
|
6 |
An investigation into an all-optical 1x2 self-routed optical switch using parallel optical processingIngram, Riaan 24 January 2006 (has links)
A unique all-optical 1x2 self-routed switch is introduced. This switch routes an optical packet from one input to one of two possible outputs. The header and payload are transmitted separately in the system, and the header bits are processed in parallel thus increasing the switching speed as well as reducing the amount of buffering required for the payload. A 1x2 switching operation is analysed and a switching ratio of up to 14dB is obtained. The objective of the research was to investigate a unique all-optical switch. The switch works by processing the optical bits in a header packet which contains the destination address for a payload packet. After the destination address is processed the optical payload packet gets switched to one of two outputs depending on the result of the optical header processing. All-optical packet switching in the optical time domain was accomplished by making use of all-optical parallel processing of an optical packet header. This was demonstrated in experiments in which a three bit parallel processing all-optical switching node was designed, simulated and used to successfully demonstrate the concept. The measure of success that was used in the simulated experiments was the output switching ratio, which is the ratio between the peak optical power of a high bit at the first output and the peak optical power of a high bit at the second output. In all experimental results the worst case scenario was looked at, which means that if there was any discrepancy in the peak value of the output power then the measurement’s minimum/maximum value was used that resulted in a minimum value for the switching ratio. The research resulted in an optical processing technique which took an optical bit sequence and delivered a single output result which was then used to switch an optical payload packet. The packet switch node had two optical fibre inputs and two optical fibre outputs. The one input fibre carried the header packet and the other input fibre carried the payload packet. The aim was to switch the payload packet to one of the two output fibres depending on the bit sequence within the header packet. Also only one unique address (header bit sequence) caused the payload packet to exit via one of the outputs and all the other possible addresses caused the payload packet to exit via the other output. The physical configuration of the all-optical switches in the parallel processing structure of the switching node determined for which unique address the payload packet would exit via a different output than when the address was any of the other possible combinations of sequences. Only three Gaussian shaped bits were used in the header packet at a data rate of 10 Gbps and three Gaussian shaped bits in the payload packet at a data rate of 40 Gbps, but in theory more bits can be used in the payload packet at a decreased bit length to increase throughput. More bits can also be used in the header packet to increase the number of addresses that can be reached. In the simulated experiments it was found that the payload packet would under most circumstances exit both outputs, and at one output it would be much larger than at the other output (where it was normally found to be suppressed when compared to the other output’s optical power). The biggest advantage of this method of packet-switching is that it occurs all-optically, meaning that there is no optical to electronic back to optical conversions taking place in order to do header processing. All of the header processing is done optically. One of the disadvantages is that the current proposed structure of the all-optical switching node uses a Cross-Gain Modulator (XGM) switch which is rather expensive because of the Semiconductor Optical Amplifier (SOA). In this method of packet-switching the length of the payload packet cannot exceed the length of one bit of the header packet. This is because the header processing output is only one header bit length long and this output is used to switch the payload packet. Thus any section of the payload packet that is outside this header processing output window will not be switched correctly / Dissertation (MEng (Electronic Engineering))--University of Pretoria, 2007. / Electrical, Electronic and Computer Engineering / unrestricted
|
7 |
Performance analysis of the general packet radio serviceLindemann, Christoph, Thümmler, Axel 17 December 2018 (has links)
This paper presents an efficient and accurate analytical model for the radio interface of the general packet radio service (GPRS) in a GSM network. The model is utilized for investigating how many packet data channels should be allocated for GPRS under a given amount of traffic in order to guarantee appropriate quality of service. The presented model constitutes a continuous-time Markov chain. The Markov model represents the sharing of radio channels by circuit switched GSM connections and packet switched GPRS sessions under a dynamic channel allocation scheme. In contrast to previous work, the Markov model explicitly represents the mobility of users by taking into account arrivals of new GSM and GPRS users as well as handovers from neighboring cells. Furthermore, we take into account TCP flow control for the GPRS data packets. To validate the simplifications necessary for making the Markov model amenable to numerical solution, we provide a comparison of the results of the Markov model with a detailed simulator on the network level.
|
8 |
Security in Packet-Switched Land Mobile Radio Backbone NetworksThomschutz, Hans Olaf Rutger 18 August 2005 (has links)
Spurred by change in government regulations and to leverage lower-cost technology and services, many land mobile radio (LMR) operators have begun transitioning from circuit-switched to packet-switched backbone networks to handle their future communication needs. Due to the unique demands of packet-switched backbone networks for LMR, it may not be wise to carry over the previously implemented security methods used with circuit-switch systems or to treat an LMR backbone as a regular packet-switched network. This thesis investigates security in packet-switched LMR backbone networks to identify security issues in packet-switched LMR networks and provide possible solutions for them. Security solutions that are examined include different types of virtual private networks (VPNs), various encryption and keying procedures for safe communication, and logic behind how and where to implement security functions within the network. Specific schemes examined include IP Security (IPSec), OpenVPN, Virtual Tunnel (VTun), and Zebedee. I also present a quantitative analysis of the effects that the solutions have on packet-switched networks, in terms of link utilization, and on voice traffic, in terms of delay and delay jitter. In addition, I evaluate, in general terms, the additional cost or complexity that is introduced by the different security solutions.
Simulation with OPNET Modeler was used to evaluate how the various security schemes affect voice communication and network performance as a whole. Since OPNET Modeler does not provide models of security functions, the source code of the transceiver system models was modified to introduce additional overhead that is representative of the various security solutions. Through experimentation, simulation, and analysis of the security schemes considered, it was found that the most effective security scheme overall for a packet-switched LMR backbone network would either be IPSec or OpenVPN implemented at the base stations and end-hosts. Both security schemes provide strong encryption, flexibility, and are actively supported. However, if bandwidth is scarce and flexibility is less important, then a security solution with less overhead, such as VTun, should be considered. Thus, one has to balance performance with security to choose the most effective security solution for a particular application. / Master of Science
|
9 |
Esquema para sincronizar relógios conectados por rede de comunicação por comutação de pacotes. / A scheme for synchronizing clocks connected by a packet communication network.Santos, Rodrigo Vieira dos 14 June 2012 (has links)
Considere um sistema de comunicação em que um equipamento transmissor envia pacotes de dados, de tamanho fixo e a uma taxa uniforme, a um equipamento receptor. Considere também que esses equipamentos estejam conectados por uma rede de comutação de pacotes, que introduz um atraso aleatório a cada pacote que trafega na rede. Nesta tese, é proposto um modelo de recuperação adaptativa de relógio capaz de sincronizar as frequências e as fases desses dispositivos, dentro de certos limites especificados de precisão. Esse método para atingir sincronização de frequência e de fase é baseado em medições dos tempos de chegada dos pacotes ao receptor, que são usados para controlar a dinâmica de um phase-locked loop (PLL) digital. O desempenho desse modelo é avaliado através de simulações numéricas realizadas considerando valores de parâmetros realistas. Os resultados indicam que esse esquema tem potencial para ser usado em aplicações práticas. / Consider a communication system in which a transmitter equipment sends fixed-size packets of data at a uniform rate to a receiver equipment. Consider also that these equipments are connected by a packet-switched network, which introduces a random delay to each packet. In this thesis, we propose an adaptive clock recovery scheme capable of synchronizing the frequencies and the phases of these devices, within specified limits of precision. This scheme for achieving frequency and phase synchronization is based on measurements of the packet arrival times at the receiver, which are used to control the dynamics of a digital phase-locked loop (PLL). The scheme performance is evaluated via numerical simulations performed by using realistic parameter values. The results suggest that this scheme has potential to be used in practical applications.
|
10 |
Measurements and analysis of UDP transmissions over wireless networksBerglund, Joel January 2018 (has links)
The growth and expansion of modern society rely heavily upon well-functioning data communication over the internet. This phenomenon is seen at the company Net Insight where the need for transferring a large amount of data in the form of media over the internet in an effective manner is a high priority. At the moment most internet traffic in the modern world is done by the use of the internet protocol TCP (Transmission Control Protocol) instead of the simpler protocol UDP (User Datagram Protocol). Although TCP works in an excellent manner for most kinds of data communication it seems that this might not always be the case, so the use of UDP might be the better option in some occurrences. It is therefore of high interest at Net Insight to see how different types of wireless networks behave under different network circumstances when data is sent in different ways through the use of UDP. Thereby this report focuses on the measurement and analysis of how different wireless networks, specifically 4G, 5.0 GHz and 2.4 GHz WLAN networks, behaves when exposed to varied network environments where data is transmitted by the use of UDP in different ways. To perform a network-analysis data is collected, processed, and then analyzed. This network-analysis resulted in many conclusions regarding network behavior and performance for the different wireless networks.
|
Page generated in 0.3893 seconds