Afin d'étudier la granulo- et la morpho-dépendance des propriétés d'énergies de surface de solides divisés, plusieurs lots de TiO2 anatase ont été synthétisés. Une série de matériaux parfaitement définis avec des morphologies allant de sphéroïdale à facettée, dans des gammes de tailles allant de 4 à 20 nm a été obtenue grâce aux modifications de conditions de pH et la présence d'acides organiques. La combinaison de différentes molécules sonde a permis de déterminer l'hétérogénéité énergétique superficielle de ces matériaux, aux interfaces solide/gaz et solide/liquide. La volumétrie de quasi-équilibre à basse pression (N2/Ar) couplée à la méthode de modélisation DIS et la microcalorimétrie à écoulement de gaz (NH3) ont mis en évidence les contributions des différentes faces cristallographiques et les effets de la cristallinité. Ces mêmes propriétés ont été analysées grâce à la titration potentiométrique en milieu aqueux (H+/OH-), couplée à la procédure TDIS (détermination du PCN et des distributions d'affinité de protons). Cette stratégie a permis une étude complète des propriétés superficielles énergétiques et géométriques des nanomatériaux. / In order to study the relationships between the particle size, the morphology and the surface energy properties of divided solids, several batches of TiO2 anatase were synthesized. A series of materials with morphologies ranging from spheroidal to well faceted, with particle sizes ranging from 4 to 20 nm were obtained by adjusting the pH conditions and the presence of organic acids. The surface heterogeneity of these materials, at solid/gas and solid/liquid interfaces, was studied by combining various molecular probes. The low pressure quasi-equilibrium adsorption volumetry (N2/Ar) coupled with the DIS modeling approach and the flow adsorption microcalorimetry (NH3) have evidenced the various contributions of crystallographic faces and the effect of the crystallinity. These properties have also been analyzed using potentiometric titration in aqueous medium (H+/OH-), coupled with the TDIS procedure, to determine PZC and proton affinity distributions. Such a strategy has led to a complete study of the energetic and geometric surface properties of these nanomaterials.

The change in morphology of a char particle affects both its trajectory and carbon consumption rate, hence the performance and efficiency of an entrained-flow gasifier. Among key processes taking place in the gasifier, the char conversion process is a limiting step for the overall carbon conversion. For that reason, the Ph.D. thesis presents the evolution of morphology of char particles during the carbon conversion process using particle-resolved transient CFD calculations. Analyses of numerical data obtained from the transient CFD calculations were carried out. As a result, new sub models related to the drag coefficient and the fundamental parameters of char conversion model were emerged. The new sub models were applied for modeling a pressured entrained-flow gasifier at laboratory scale. The numerical results of the gasifier show a good agreement with experimental data and an improvement of the sub models applied.

Ce travail a concerné l'étude de la fonctionnalisation métallique et du contrôle morphologique de nanoparticules de silice mésoporeuse appelées MSN. La voie de fonctionnalisation par synthèse directe a été privilégiée et a consisté en une encapsulation des précurseurs métalliques dans la phase porogène. L'insertion de cuivre, palladium, platine, argent or et de bimétalliques Cu/Pd et Pd/Pt a été réalisée. Il résulte de cette approche une localisation des nanoparticules métalliques dans les pores et d'une grande accessibilité des fonctionnalités à l'origine des excellentes performances catalytiques mesurées. Ces performances et le recyclage du catalyseur Cu@MSN ont été démontrés pour des réactions de Huisgen et de Sonogashira. Il a également été étudié l'adsorption de l'iode moléculaire en phase gaz sur des MSN fonctionnalisées par des nanoparticules d'argent avec d'excellentes capacités de rétention. / The objective of this thesis was to develop efficient synthesis routes to prepare mesoporous silica-based nano-sized particles, designated as MSN, with controllable morphology and derivatised with selected transition metals. One-pot preparation and surface functionalisation procedures based on the insertion of the metal-phase precursor into the porogen aggregates were thoroughly optimised leading to silica particles containing such single metals as copper, palladium, platinum, silver or gold, as well as a two-metal phase of copper and palladium or that of palladium and platinum. It was demonstrated that the highly dispersed metal phase was localised on the pore surface and therefore it was readily accessible to the target chemicals on which to base the catalytic performance of the resulting materials. Among others, the remarkable catalytic performance of the Cu@MSN material in Huisgen and Sonogashira reactions and its propensity to undergo efficient recycling were proven through laboratory-scale testing. Experimental study of the selective adsorption of iodine vapour onto MSN supports functionalised with silver nanoparticles indicated an excellent retention capacity of such materials.

Des polymères à base de méthacrylate de poly(oxyde d'éthylène) (PEOMA) avec des chaînes pendantes PEO (Mn = 300 ou 950 g mol-1) ou des copolymères de PEOMA300 et d'acide méthacrylique (AMA) ont été synthétisés par polymérisation radicalaire contrôlée par les nitroxydes en utilisant une alkoxyamine (BlocBuilder®) comme amorceur en présence de SG1 et d'une faible quantité de styrène. Les copolymères à base de PEOMA300 et d'AMA sont thermo- et pH-sensibles. Les deux types de macroalkoxyamines ont été utilisés pour amorcer la copolymérisation en émulsion du méthacrylate de n-butyle et du styrène et former, par auto-assemblage induit par la polymérisation, des particules composées de copolymères à blocs amphiphiles, en absence ou présence de particules de silice. En absence de silice, des particules stabilisées de façon stérique ou électrostérique ont été formées. La polymérisation présente les caractéristiques d'une polymérisation contrôlée avec néanmoins la formation d'une faible proportion de chaînes mortes. L'effet du pH, de la force ionique et de la nature ou de la concentration des macroalkoxyamines sur la cinétique de polymérisation et la morphologie des particules a été étudié, et des sphères, des vésicules ou des nanofibres ont été obtenues. Les macroalkoxyamines à base de PEO s'adsorbent sur la silice via la formation de liaisons hydrogène entre les chaînes PEO et les groupes silanol. La synthèse de copolymères à blocs en surface de la silice a conduit à la formation de particules hybrides de différentes morphologies (bonhomme de neige, multipodes, framboise, coeur-écorce, têtard, mille pattes) liées à la taille de la silice, au pH et à la nature du macroamorceur / Water-soluble brush-type polymers composed of poly(ethylene)oxide methacrylate (PEOMA) units with PEO side groups of various chain lengths (Mn = 300 and 950 g mol-1) or of PEOMA300 with methacrylic acid (MAA) were synthesized by nitroxide-mediated polymerization using an alkoxyamine initiator (BlocBuilder®) and SG1 nitroxide in the presence of a low amount of styrene. The PEOMA300-MAA based copolymers showed a dual temperature/pH response. The two series of macroalkoxyamines were used in aqueous emulsion copolymerization of nbutyl methacrylate and styrene leading to the formation of particles composed of amphiphilic block copolymers through polymerization-induced self-assembly, in both the absence and presence of silica. The experiments performed in the absence of silica particles resulted in the formation of sterically or electrosterically stabilized latexes. The polymerization exhibited all the features of a controlled system with however the presence of a small proportion of dead chains. The effect of pH value, ionic strength and type and concentration of the macroalkoxyamine initiator on polymerization kinetics and latex morphologies was investigated. Depending on the reaction conditions, spherical particles, vesicles or nanofibers were successfully prepared. The PEO-based macroalkoxyamines were shown to adsorb on the silica surface via hydrogen bond interaction between PEO and the silanol groups. This enabled block copolymers to be generated in situ on the silica surface leading to hybrid particles with snowman, raspberry, daisy, core-shell, “tadpole-” and “centipede-” like morphologies depending on the silica particle size, pH value and type of macroinitiator

Coals, from mines in the Highveld coalfield, as well as gasification ash samples were characterised, in order to understand the mineralogical and chemical properties of the individual components in the gasification feedstocks. X-ray diffraction of low temperature oxygen-plasma ash indicates that the coals contain significant proportions of kaolinite, quartz and a fluxing elements-bearing mineral (dolomite), plus minor concentrations of illite and other fluxing elements-bearing minerals namely calcite, pyrite and siderite. Of the feed coal, the -75+53 mm size fraction has a high pyrite, and to a lesser extent a high calcite and dolomite content. However, the small proportion of iron-bearing phases (from the reaction between kaolinite and pyrite) in samples taken from the gasifier implies that pyrite contributes minimally to sintering or slagging in this case. Calcite is mainly present in the >1.8 g/cm3 density fraction of the feed coal, whereas dolomite is mainly present in the 1.5-1.8 g/cm3 density fraction, as inclusions or fine cleats in the coal matrix. Electron microprobe analyses of coals from the six different South African mines confirmed that some Ca, Mg, Al, Si, Na, K, Ti and Fe are present in the organic matrix in the coal samples tested in this study, but the amounts of these are small compared with the fluxing elements in minerals. XRD and microprobe analyses indicate that the ash clinker samples taken from the gasifiers contain a number of crystalline high temperature phases, including anorthite, mullite, cristobalite, quartz and diopside. FactSage confirmed that anorthite and mullite are equilibrium phases at elevated temperatures in the ash clinkers and heated rock fragments. Limited reaction takes place between the included coal minerals and the extraneous rock fragments. / Thesis (PhD)--University of Pretoria, 2008. / Materials Science and Metallurgical Engineering / unrestricted