O presente trabalho apresenta um modelo de aplicação de ferramentas de projeto integradas ao longo das fases de desenvolvimento de produto, neste caso, aplicadas na melhoria do produto suporte para fixação de cilindro de gás natural veicular. O foco do trabalho é apresentar a integração de ferramentas nas fases de Projeto Informacional, Projeto Conceitual e Projeto Detalhado do Processo de Desenvolvimento de Produtos. Entende-se por integração a escolha de ferramentas que permitam conduzir o fluxo de informação ao longo das fases de desenvolvimento de produtos, de tal forma que a informação de saída de uma ferramenta seja a informação de entrada da ferramenta subseqüente. As ferramentas integradas a partir da fase de Projeto Informacional foram a Pesquisas de Mercado Qualitativa e Quantitativa, com a finalidade de identificar as demandas dos clientes. As demandas dos clientes foram os dados de entrada da Matriz da Qualidade (Quality Function Deployment - QFD), resultando nos requisitos do produto e suas respectivas especificações-meta. A partir dos requisitos do produto, diferentes conceitos (configurações) foram gerados, apoiados pela Matriz Morfológica no Projeto Conceitual. Na seqüência utilizou-se a ferramenta de Projeto de Experimentos (Design of Experiments - DOE) para avaliar a estimativa de preço frente às possíveis configurações do produto. Com a Matriz de Pugh, alternativas de conceito de produto foram avaliadas possibilitando a escolha do melhor conceito de produto. No Projeto Detalhado, foi aplicada ferramenta de Análise dos Modos de Falha e seus Efeitos (Failure Mode and Effects Analysis - FMEA), utilizado de forma integrada com o QFD, para identificar as falhas atuais e potenciais e seus efeitos em sistemas e processo. Em função das demandas identificadas, foram definidas e implementadas melhorias no produto. Observou-se a adequabilidade destas ferramentas de projeto para aplicação de forma integrada, garantindo um fluxo contínuo de informações rastreáveis e que tendem a levar à uma reduzida chance de perdas ao longo do processo. / There are few examples in literature about the integration of project tools along the product development phases. The main research objective in thesis is to integrate some tools that facilitate the information flow along the product development phases, more specifically in Informational Project, Conceptual Project and Detailed Project phases. The product improvement “support for Vehicular Natural Gas” was the object of study in thesis. The main idea is that the information output from one tool is the input information of the subsequent tool. Starting from the Informational Project phase it was performed qualitative and quantitative market researches with the purpose of identifying the customers' demands for the studied product. The customers’ demands were the entrance data of the QFD (Quality Function Deployment) tool resulting in the product requirements and their respective specifications-goal. In Concept Project the product requirements were converted in functions and further different concepts were generated through the Morphologic Analysis. In the sequence, it was used the DOE (Design for experiments) tool to evaluate the estimate price to the possible products' configurations. The Pugh Matrix tool was used for concepts evaluation and choice. The FMEA (Failure Mode and Effects Analysis) tool integrated with QFD was useful for current and potential failures identification and impact analysis in the system and process. With the application of these five tools the users’ demands were identified and improvements to the product were performed. The chosen tools proved to be adequate for integration, assuring that a continuous trackable information flow was attained with presumable reduced information loss, along the Product Development Process phases.

O presente trabalho apresenta um modelo de aplicação de ferramentas de projeto integradas ao longo das fases de desenvolvimento de produto, neste caso, aplicadas na melhoria do produto suporte para fixação de cilindro de gás natural veicular. O foco do trabalho é apresentar a integração de ferramentas nas fases de Projeto Informacional, Projeto Conceitual e Projeto Detalhado do Processo de Desenvolvimento de Produtos. Entende-se por integração a escolha de ferramentas que permitam conduzir o fluxo de informação ao longo das fases de desenvolvimento de produtos, de tal forma que a informação de saída de uma ferramenta seja a informação de entrada da ferramenta subseqüente. As ferramentas integradas a partir da fase de Projeto Informacional foram a Pesquisas de Mercado Qualitativa e Quantitativa, com a finalidade de identificar as demandas dos clientes. As demandas dos clientes foram os dados de entrada da Matriz da Qualidade (Quality Function Deployment - QFD), resultando nos requisitos do produto e suas respectivas especificações-meta. A partir dos requisitos do produto, diferentes conceitos (configurações) foram gerados, apoiados pela Matriz Morfológica no Projeto Conceitual. Na seqüência utilizou-se a ferramenta de Projeto de Experimentos (Design of Experiments - DOE) para avaliar a estimativa de preço frente às possíveis configurações do produto. Com a Matriz de Pugh, alternativas de conceito de produto foram avaliadas possibilitando a escolha do melhor conceito de produto. No Projeto Detalhado, foi aplicada ferramenta de Análise dos Modos de Falha e seus Efeitos (Failure Mode and Effects Analysis - FMEA), utilizado de forma integrada com o QFD, para identificar as falhas atuais e potenciais e seus efeitos em sistemas e processo. Em função das demandas identificadas, foram definidas e implementadas melhorias no produto. Observou-se a adequabilidade destas ferramentas de projeto para aplicação de forma integrada, garantindo um fluxo contínuo de informações rastreáveis e que tendem a levar à uma reduzida chance de perdas ao longo do processo. / There are few examples in literature about the integration of project tools along the product development phases. The main research objective in thesis is to integrate some tools that facilitate the information flow along the product development phases, more specifically in Informational Project, Conceptual Project and Detailed Project phases. The product improvement “support for Vehicular Natural Gas” was the object of study in thesis. The main idea is that the information output from one tool is the input information of the subsequent tool. Starting from the Informational Project phase it was performed qualitative and quantitative market researches with the purpose of identifying the customers' demands for the studied product. The customers’ demands were the entrance data of the QFD (Quality Function Deployment) tool resulting in the product requirements and their respective specifications-goal. In Concept Project the product requirements were converted in functions and further different concepts were generated through the Morphologic Analysis. In the sequence, it was used the DOE (Design for experiments) tool to evaluate the estimate price to the possible products' configurations. The Pugh Matrix tool was used for concepts evaluation and choice. The FMEA (Failure Mode and Effects Analysis) tool integrated with QFD was useful for current and potential failures identification and impact analysis in the system and process. With the application of these five tools the users’ demands were identified and improvements to the product were performed. The chosen tools proved to be adequate for integration, assuring that a continuous trackable information flow was attained with presumable reduced information loss, along the Product Development Process phases.

The main aim of this work was to rate the usage of selected logistic methods and introduction of the operating system Kanban to the production line in the project {\clqq}C214 Top Roll`` of the company Faurecia Automotive Czech Republic, s.r.o, Interior Systems. A minor aim then was to find out the knowledge level of the Kanban method. Methodics Hypotheses: 1.The logistic flows used in the Faurecia company already function sufficiently enough, the proof of which is the stabilised production. 2.Using the operating system Kanban for functioning production, logistics and the whole company Faurecia is rather advantageous. 3.Training all the employees is a vital part in the process of introducing the operating system Kamban. Methods: deducion, situation analysis - collection of information,interviews, survey, questioning brief, modeling Structure of the practical part is following: company profile, character of pruduction and setting of the main logistical flows, determination of zones and stock sectors, process implementation and using of Kanban in the production line "C214 Top Roll". The first hypothesis can be confirmed by the situational analysis which evaluates the processing and logistic method. The individual methods {\clqq}met`` or {\clqq}nearly met`` the demands and because all the methods together partake of the production and the production has provided very good results in the previous months, we can consider the production being stabilised. The second can also be affirmed. If the production on a particular assembly line is stabilised, it is possible to introduce the Kanban method. Why not to use it if a there is a great advantage of this method in simplicity and lower production supplies which result in decreasing the total costs? It is beneficial for all participating on the production and for the Faurecia company as a whole. Third hypothesis can be confirmed as well. There has been a survey based on short questionaires and the knowledge of working and using the Kanban has been found inadequate. The best form of providing all the important information will be a training as a part of the process of introducing and using the Kanban method. Both aims have been resulted in stating possible recommendations and improvement suggestions: - production is stabilized, Kanban is possible to apply on 1.9. 2008 - training is necessary, meeting of responsible persons, control, messing, measures, - training of current and new workers, - motivation, communication improve, - system of regural records about information and control of chief (material and production planning)

The subject of this work deals with the problem of channel estimation for CDMA systems. This method of multiple access when individual users share the same full bandwidth simultaneously and are differentiated with any of pseudorandom sequences, is now the most perspective method. That is proved by its wide implementation in mobile networks of the third generation and higher systems. This work describes basic theory principles of spread spectrum, above all DS-CDMA (Direct Sequence-CDMA) and furthermore some phenomena of radio wireless channel that affect changes in transmitted signal in its way from transmitter to receiver. Terms of fading, multipath propagation, loss, refraction, scattering of the wave and Rice and Rayleigh probability density functions are mentioned. The third chapter deals with yet known and used capabilities of channel estimation. Differences, advantages and disadvantages of so-called blind estimation or training-based estimation are discussed. Two algorithms: LS method and sliding correlator are analyzed in more detail. There is also description of their simulations in Matlab and some results of these simulations are discussed. The last chapter deals with comparison of main characteristics and achievable accuracy of wireless channel impulse response estimation by both methods, and their possible utilization in real live.

Disertační práce je zaměřena na měření a modelování kanálu uvnitř a vně vozidla pro komunikaci a lokalizaci. Pro účely vytvoření integrovaného inteligentního dopravního systému ITS (Intelligent transportation system) je důležitý odhad vlastnosti kanálů pro vnitřní a venkovní scénáře. Za tímto účelem je vhodné provést řadu činností, které jsou obsahem disertační práce: Simulace fyzické vrstvy 802.11p, její srovnávání s 802.11a, měření kanálu pro různé scénáře pro 802.11p a pro širokopásmový systém (UWB), vytvoření modelů kanálů pro 802.11p a UWB a výzkum vlastností lokalizace založené na měření v pásmu UWB. Výzkum komunikace vozidla s okolím založená na IEEE 802.11p standardu. Jedním z cílů disertační práce je ukázat rozdíly mezi standardy fyzické vrstvy IEEE 802.11a a IEEE 802.11p prostřednictvím simulace s použitím modelu kanálu HIPERPLAN/2. V práci je uvedena simulace přenosu signálu 802.11p kanálem ITU-R M.1225 s odlišným zpožděním a středním výkonem (pro chodce a vozidla). Vliv kanálu na signál je analyzován za použití simulace v prostředí MATLABu pomocí vyhodnocení chybovosti. Určení vlastností kanálů v kmitočtovém pásmu 5,8 GHz pro standard IEEE 802.11p a UWB. Experimenty byly prováděny pro vnitřní a vnější prostředí vozidla. Bylo zjištěno, že pro protokol 802.11p může být trend (dlouhodobý vývoj) profilu PDP (power delay profile) nejlépe aproximován pomocí modelu obsahujícího dvě klesající exponenciální funkce, na rozdíl od Saleh-Valenzuelova (S-V) modelu, který je více vhodný pro UWB systémy pracující v pásmu 3 až 11 GHz. Vytvoření odpovídající impulzní odezvy (CIR) s využitím trendu PDP. Informace o CIR byla použita pro simulaci 802.11p za účelem vyhodnocení chybovosti při použití Ricianova modelu. Výsledky odhadu BER ukazují vhodnost protokolu pro vnitřní a vnější prostředí bezdrátových aplikací. Výsledky simulací dále ukazují, že se chybovost zásadně nemění a proto je možné určit střední křivku BER pro celou sadu změřených dat. Určení vlivu malé změny polohy antény na vlastnosti kanálu. Práce ukazuje náhodnost parametrů UWB kanálu pro malé změny polohy antény okolo vozidla, zaparkovaného v podzemní garáži. Ztráty šířením jsou monotónně rostoucí se vzdáleností, avšak náhodně se mění v závislosti na úhlu a výšce antén, a proto je vyhodnocení vzdálenosti pomocí síly signálu pro tyto scénáře nevhodné. Na druhé straně může být pro spolehlivé určení vzdálenosti bez ohledu na úhel nebo výšku antény použita doba příchodu prvního svazku. Ověření vlivu změn konfigurace kanálu na parametry S-V modelu. Práce demonstruje závislost parametrů Saleh-Valenzuela modelu v na vzdálenosti a výšce antén, avšak ukazuje, že jejich průměrné hodnoty jsou blízké IEEE 802.15.3 standardu. Ověření možnosti lokalizace pomocí metody TOA (time of arrival). Vzdálenost mezi anténami byla určena z profilu PDP s využitím lineární závislosti vzdálenosti na zpoždění. Souřadnice vysílací antény byly nalezeny pomocí dvou přijímacích antén pomocí 2-D lokalizační techniky TOA. Porovnání vypočtených souřadnic s původními vykazuje chybu menší než 6%, což ukazuje vhodnost navrženého přístupu pro lokalizaci vozidel.

An investigation into the impact of generalised maximum entropy solutions on the study of queues with or without arrival balking and their applications to congestion management in communication networks Keywords: Queues, Balking, Maximum Entropy (ME) Principle, Global Balance (GB), Queue Length Distribution (QLD), Generalised Geometric (GGeo), Generalised Exponential (GE), Generalised Discrete Half Normal (GdHN), Congestion Management, Packet Dropping Policy (PDP) Generalisations to links between discrete least biased (i.e. maximum entropy (ME)) distribution inferences and Markov chains are conjectured towards the performance modelling, analysis and prediction of general, single server queues with or without arrival balking. New ME solutions, namely the generalised discrete Half Normal (GdHN) and truncated GdHN (GdHNT) distributions are characterised, subject to appropriate mean value constraints, for inferences of stationary discrete state probability distributions. Moreover, a closed form global balance (GB) solution is derived for the queue length distribution (QLD) of the M/GE/1/K queue subject to extended Morse balking, characterised by a Poisson prospective arrival process, i.i.d. generalised exponential (GE) service times and finite capacity, K. In this context, based on comprehensive numerical experimentation, the latter GB solution is conjectured to be a special case of the GdHNT ME distribution. ii Owing to the appropriate operational properties of the M/GE/1/K queue subject to extended Morse balking, this queueing system is applied as an ME performance model of Internet Protocol (IP)-based communication network nodes featuring static or dynamic packet dropping congestion management schemes. A performance evaluation study in terms of the model’s delay is carried out. Subsequently, the QLD’s of the GE/GE/1/K censored queue subject to extended Morse balking under three different composite batch balking and batch blocking policies are solved via the technique of GB. Following comprehensive numerical experimentation, the latter QLD’s are also conjectured to be special cases of the GdHNT. Limitations of this work and open problems which have arisen are included after the conclusions

Continuous technological development and increasing efficiency demands are driving products toward becoming more and more complex. For the aerospace industry - where the requirements for performance, safety and low environmental impact already are substantial - this means that more extensive quality assurance measures must be taken to ensure the fulfillment of the requirements of each individual component.However, to avoid that the work with quality improvement become too extensive and increase the product cost to unbearable levels it is necessary to have methods to prioritize and focus improvement efforts on the product features that matters most for fulfilling customer requirements. Therefore, the concept of Key Characteristics is used today, both in the aerospace and other industries; a term for those characteristics that have a significant impact on requirement compliance and whose outcomes at the same time are expected to vary considerably in manufacturing.The concept itself is similar among those who use it but the purpose of and methodology for identifying and managing Key Characteristics vary, even within the same industry. This thesis is therefore aimed to create a view of which factors that characterize an effective and efficient way for companies in the aerospace industry to work with Key Characteristics. The thesis involves a case study to create a framework for how companies within this industry work with Key Characteristics, a literature review to see which approaches are advocated by previous research and two benchmark studies to see examples of how Key Characteristics are used and handled in practice in industry.The results show that the work of Key Characteristics should meet three main criteria in order to be effective and efficient: • it must be clearly focused on the characteristics that have critical impact on customer requirements and at the same time considerable variation in production, • it should be initiated early in the product development process and then performed iteratively during the process of continuously reducing variation problems in manufacturing, and • it should identify Key Characteristics using both qualitative and quantitative tools to best capture all different kinds of requirements on the product.Finally a practical example is given of how the work with Key Characteristics should look like at GKN Sweden AB, the case study company in the aerospace industry, to effectively minimize the costs associated with production variation, and yet satisfy all customer requirements. / <p>Validerat; 20140811 (global_studentproject_submitter)</p>

L’obiettivo di questo lavoro è guidare il docente attraverso la letteratura esistente, gli strumenti già in uso e si propone di fornire una modellizzazione per la pratica didattica delle lingue straniere ad alunni sordi. Nel primo e nel secondo capitolo si raccolgono, analizzano e definiscono le basi teoriche di riferimento per la didattica delle lingue a soggetti sordi. Nello specifico, si definiscono il quadro della glottodidattica speciale, i principi di bisogno speciale e specifico e le linee guida per la didattica in contesti di disabilità, procedendo con l’inclusione della sordità tra le esigenze a cui riferirsi con tali strumenti. Il terzo e il quarto capitolo rappresentano l’applicazione concreta dei modelli esposti con l’applicazione del modello SOMA al mondo della sordità e la costruzione del Profilo Glottomatetico Funzionale dell’alunno sordo. Nell’ultimo capitolo si presenta la proposta operativa di didattica dell’inglese ai sordi, partendo dall’analisi e la scelta dei materiali più accessibili, passando per la progettazione fino ad arrivare alla strutturazione specifica del lavoro di classe. / This work aims to guide the foreign language teacher trough the literature on special education needs and deafness, the available tools, and the modeling for everyday practice to encourage the inclusion of deaf students until now considered not teachable. In the first and second chapters, the theoretical approaches to deaf students learning are presented in the contexts of special language teaching, special education, and disabilities. The third and fourth chapters represent the application of those principles to include deaf students in the language classroom activities following the operational models usually used for different learning disabilities. The last chapter offers the concrete model that may guide teachers from their deaf students' needs analysis and the correct material choice for them, passing through the learning project management to get to the specific class lessons, in collaboration with support staff members.