• Refine Query
  • Source
  • Publication year
  • to
  • Language
  • 9
  • 1
  • 1
  • 1
  • Tagged with
  • 16
  • 6
  • 6
  • 6
  • 6
  • 6
  • 4
  • 4
  • 4
  • 3
  • 3
  • 2
  • 2
  • 2
  • 2
  • About
  • The Global ETD Search service is a free service for researchers to find electronic theses and dissertations. This service is provided by the Networked Digital Library of Theses and Dissertations.
    Our metadata is collected from universities around the world. If you manage a university/consortium/country archive and want to be added, details can be found on the NDLTD website.
1

Evaluating and Comparing of Three Penetrability Measuring Devices : Modified Filter Pump, Modified Penetrability Meter, and Short Slot

Ali Akbar, Saman, Al-Naddaf, Manar January 2015 (has links)
Rock grouting is a commonly used process for sealing rocks in tunnels to reduce water ingress. In order to achieve sufficient sealing level the grout must effectively penetrate into rock fractures while the limiting factor is filtration of cement based grout. Many devices and measuring methods have been developed to study filtration and to measure the penetrability. The filter pump and the penetrability meter are two of the most commonly used instruments for measuring filtration tendency in the field and in the lab, while short slot is used mainly in the lab. The results obtained from these devices have relatively different estimations of the penetrability partly due to the weaknesses in measuring methods and test procedures. Furthermore, there are no clear criteria to find out which of the results are closer to the reality or how much the results differ among these instruments. The aim of this study is comparing, and evaluating the results of these devices in relatively similar conditions while using more accurate methods of weight-time and pressure-time compared to the less reliable total volume method. The filter pump and the penetrability meter were modified In order to fulfill the requirement of testing in similar conditions and to improve their accuracy and versatility. The results show that increasing the pressure improves the penetrability significantly. The modification of the filter pump results in reducing many uncertainties related to the testing procedure. Probably the modified filter pump has higher accuracy in measuring the penetrability compared to regular filter pump. The short slot has the highest accuracy in estimating penetrability of cement based grout especially at higher pressures, furthermore, the short slot provides a more flexible way to measure penetrability with different pressures in the range of 1-15 bars.
2

Autism, Social Comprehension, and Cognitive Impenetrability

Hudgens-Haney, Matthew E 26 April 2010 (has links)
Autism is a neurodevelopmental disorder featuring severe social and communicative deficits. Cognitive impenetrability is the inability of systems to be affected by an individual’s beliefs and desires. Individuals with autism have delayed performance on "mindreading" tasks. Mindreading is the interpretation of others which enables successful social interactions. This task performance is not correlated with "everyday" social function in autism. These deficits are in contrast with general intelligence and reasoning abilities within the normal range, resistant to cognitive behavioral training, and partially attributable to atypical social predispositions. This suggests individuals with autism perform social tasks differently than typicals. I argue that this mindreading deficit is cognitively impenetrable, then position this deficit within a theoretical framework, enactivism, emphasizing cognitive embodiment and inseparability of social comprehension and action. This framework helps explain the cognitive impenetrability of these social deficits by "locating" failure to penetrate in individuals' failure to properly interact with the environment.
3

How The Cognitive Penetrability Of Emotions Undermines Rational Sentimentalism

Stanford, Benjamin 13 December 2013 (has links)
In this thesis I argue that a leading sentimentalist theory, Rational Sentimentalism, faces the Problem of Superfluity because the evaluative properties to which certain emotions are responses can be defined independently of examining those emotional responses. In other words, the connection to value that Rational Sentimentalism aims for fails to obtain. I show that at least one such emotion, disgust, is influenced by higher cognition to a degree incompatible with Rational Sentimentalism avoiding the Problem of Superfluity. I conclude by suggesting ways in which other emotions are structurally similar to disgust, and therefore face the same problem in being incorporated into Rational Sentimentalism.
4

Holzaufbau und Tränkbarkeit

Rosenthal, Michael, Bäucker, Ernst, Bues, Claus-Thomas 19 July 2011 (has links) (PDF)
Im Rahmen holztechnologischer Prozesse wie dem Holzschutz, der Holzmodifizierung oder der Zellstoffherstellung sind die Eindringwege von Flüssigkeiten in das Holz von großem Interesse. Neben den Eigenschaften des Tränkmittels und der Gestaltung des Tränkprozesses stellt der Aufbau des Holzes einen der wesentlichen Einflussfaktoren hinsichtlich der Permeabilität des Holzes für Flüssigkeiten dar. Der Artikel gibt einen Überblick über den Einfluss mikrostruktureller Eigenschaften des Holzes auf dessen Tränkbarkeit.
5

An Experimental Study to Measure And Improve the Grout Penetrability

Nejad Ghafar, Ali January 2016 (has links)
An essential demand in any underground facility is to seal it against the water ingress to reduce the time and cost of the construction and the corresponding environmental hazards. To achieve this, obtaining sufficient grout spread is of great importance. Among the grouts, cement grouts with lower costs and environmental issues have been more reliable, whereas their main problem is filtration that restricts the grout spread. Several investigations have been therefore aimed to develop instruments to measure the grout penetrability as a fundamental means to improve the grout spread. Due to the difference in assumptions, limitations, and test conditions, and the deficiency in design their results are occasionally in contradiction. The question here is how to measure the grout penetrability more realistic? To answer this, two of the most frequently used instruments, Filter pump and Penetrability meter, were adjusted to approach the test conditions in Short slot. The results were discussed with respect to the origins of contradictions to better evaluate the reliability and functionality of the instruments. Among the influencing parameters on grout spread, applied pressure is a key element. The stepwise pressure increment is the method currently used to improve the grout spread in rock. Application of dynamic grouting has been studied as a solution to improve the grout spread for almost three decades. Despite some promising results, the method has not been yet industrialized due to the limited efficiency and issues in the type and frequency of the applied pressure, and the geometry of the test equipment. Therefore, finding a more efficient alternative of the applied pressure was the second goal of this study. A pneumatic pressure control system was consequently employed to examine the efficiency of the method in Short slot. The results conclusively revealed the effectiveness of the method and provided a strong basis for further development of the dynamic grouting. / Ett viktigt krav när man bygger under mark är att konstruktionen blir tillräckligt tät, så att inläckage av grundvatten minimeras. Detta minskar både projektkostnaden och eventuell miljöpåverkan. För att skapa en tät konstruktion måste injekteringsbruket spridas tillräckligt i bergmassan. Kemiska injekteringsmedel har ofta bättre spridning i bergmassan än cementbaserade bruk, men cementbaserade bruk är både billigare och ger mindre miljöpåverkan. Det finns dock en del problem med cementbaserade bruk, nämligen att cementpartiklarna filtreras och att brukets reologiska egenskaper begränsar brukets utbredning. Ett antal studier har därför utförts för att studera dessa egenskaper hos cementbaserade bruk och utveckla metoder och instrument för att mäta brukets inträngningsförmåga. Detta i syfte att förbättra brukets utbredning. Dagens metoder och instrument ger nämligen ibland motsägelsefulla resultat på grund av de olika antaganden, begränsningar och förutsättningar som används i de olika testerna. Huvudfrågan är alltså hur man kan mäta brukets inträngningsförmåga på ett mer realistiskt sätt. För att undersöka detta modifierades två vanliga mätinstrument – filterpumpen och filterpressen – för att passa förhållandena i testanordningen Short slot. Resultaten diskuterades med avseende på olika typer av skillnader mellan metoderna i syfte att utröna dels vad som påverkar inträngningsförmågan, dels instrumentens tillförlitlighet och funktionalitet. Bland de parametrar som påverkar brukets spridning i bergmassan har injekteringstrycket en central roll. I dagsläget används stegvis tryckökning för att förbättra brukets spridning i sprickigt, hårt berg. Hur man kan använda dynamisk injektering för att förbättra brukets spridning har dock undersökts under snart tre decennier. Trots lovande resultat av denna metod ännu inte börjat användas i praktiken. Ett problem är svårigheten att ta försök på labb till fältmässiga förhållanden. Ett exempel är att man använde ett tryck som varierade med hög frekvens i en spricka som modellerades med två parallella skivor utan förträngningar, vilket är mycket annorlunda jämförelse med en riktig bergspricka. I modellen blir nämligen brukets spridning starkt beroende av brukets reologiska egenskaper, medan det snarare är filtrering som är problemet i en naturlig spricka på grund av förträngningarna. Dessutom fokuserade tidigare studier endast på sprickor med en sprickvidd större än 100 μm, trots att god spridning av bruket även i de smala sprickorna med mindre än 70 μm bredd är mycket viktigt när det är höga krav på anläggningens täthet. Ett annat mål med denna licentiatuppsats var därför att hitta nya sätt att förbättra brukets spridning i berget. Därför övervakades trycket med ett pneumatiskt kontrollsystem vid tester i Short slot för att studera hur effektiv denna metod är under mer realistiska förhållanden med förträngningar på mindre än 70 μm. Resultaten visade att metoden är effektiv, vilket utgör en bra bas för att fortsätta utveckla dynamisk injektering. / <p>QC 20160413</p>
6

Penetrability due to filtration tendency of cement based grouts

Eklund, Daniel January 2005 (has links)
<p>Grouting as a method of strengthening and sealing rock, soil and concrete is widely used. The possibilities of sealing structures are of great importance from both an economical and environmental point of view. The cost of grouting has in certain projects been as high as the cost for the blasting and excavation of the tunnel. To improve the technique of grouting with cement based material, it is necessary to focus on the properties of the used grout mixture. The ability of a grout to penetrate cavities, channels and porous material, the penetrability, depends on two things, the theology and the filtration tendency. Extensive laboratory tests on stable, low w/c-ratio, injection grouts show that the most significant limitation to their penetrability is the tendency of cement grains to agglomerate into an impermeable filter cake. The properties of a grout that may prevent passing obstructions in the flow path without the cement grains clogging and preventing further penetration is in this work called filtration tendency. An inert material mixture and a cement-based mixture are used for the investigations in this work. The inert material, which is crushed dolomite stone, does not react with the added water in the mixture. The used cement grouts are based upon three types of commercial available Portland cements and four Portland cements with modified grain size distribution curves. </p><p>Performed tests show that the grain size and grain size distribution is of great importance for the filtration tendency. According to performed experiments with inert and cement material, it seems to be advantageous for the penetrability to have a grain size distribution that contains neither too many fine or coarse grains. It is reasonable to believe that the grain size distribution should be relatively steep (narrow grain size range) between minimum and maximum grain size. The maximum grain size is of importance in terms of for example d<sub>95.</sub> Too large maximum grain size will prevent penetration of the mixture through obstructions in the flow path. According to performed tests, the value of d<sub>95</sub>, should be between </p><p>4-10 times smaller than the aperture to be penetrated by the cement based mixture. The small grain sizes are also of importance in order to achieve a low filtration tendency of the grout. This is because of the increased tendency for the small grains to flocculation into larger agglomerates, compared to larger grain sizes. </p><p>The filtration experiments with cement based grouts show that influences of parameters like surface chemistry (use of superplastisisers) and cement chemistry (hydration of cement grains) will strongly affect the filtration tendency of the mixture. </p><p>To visualize the phenomenon of filtration tendency it can be investigated on a larger scale than usually takes place. Filtration experiments in the scale of approximately 100:1 have been performed in order to see influences of grain concentration, grain shape and the penetrated slot aperture. It can be seen that used grain sizes (monodisperse and inert mixture) should be approximately at least 2-3 times smaller than the aperture to be penetrated by the mixture. Numerical experiments of filtration tendency have also been performed to investigate the possibilities to numerically simulate the influence of grain concentration and slot aperture. The numerical experiments are based on Eulerian flow modelling.</p>
7

Comparing Two Perspectives for Understanding Decisions from Description and Experience

Kauffman, Sandra S. 21 March 2014 (has links)
When trying to make sense of uncertain situations, we might rely on summary information from a description, or information gathered from our personal experience. There are two approaches that both attempt to explain how we make risky decisions using descriptive or experiential information—the cognitive-based explanation from the description-experience gap, and the emotion-based explanation from the somatic marker hypothesis (SMH). This dissertation brings together these two approaches to better understand how we make risky decisions. Four options were presented, with options differing in terms of advantageousness and riskiness. How easy or difficult it was to consciously comprehend the reward structure, or cognitive penetrability, was manipulated by displaying single outcomes or multiple, diverse outcomes per trial. Within the description or experience task, participants were randomly assigned to the more or less penetrable version of an all gain or all loss set of options. How often the riskier or advantageous options were chosen served as a measure of risky or advantageous decision making. Regardless of penetrability, risk preferences were generally but not completely as predicted by the SMH. Instead, the primary effect of cognitive penetrability was on advantageous decision making. Furthermore, description was found to be more cognitively penetrable than experience. Overall, the results suggest that clarification is needed regarding how somatic markers are formed in the loss versus gain domain, and future research should consider the difference in penetrability between description and experience when trying to explain preferences between the two decisions.
8

Penetrability due to filtration tendency of cement based grouts

Eklund, Daniel January 2005 (has links)
Grouting as a method of strengthening and sealing rock, soil and concrete is widely used. The possibilities of sealing structures are of great importance from both an economical and environmental point of view. The cost of grouting has in certain projects been as high as the cost for the blasting and excavation of the tunnel. To improve the technique of grouting with cement based material, it is necessary to focus on the properties of the used grout mixture. The ability of a grout to penetrate cavities, channels and porous material, the penetrability, depends on two things, the theology and the filtration tendency. Extensive laboratory tests on stable, low w/c-ratio, injection grouts show that the most significant limitation to their penetrability is the tendency of cement grains to agglomerate into an impermeable filter cake. The properties of a grout that may prevent passing obstructions in the flow path without the cement grains clogging and preventing further penetration is in this work called filtration tendency. An inert material mixture and a cement-based mixture are used for the investigations in this work. The inert material, which is crushed dolomite stone, does not react with the added water in the mixture. The used cement grouts are based upon three types of commercial available Portland cements and four Portland cements with modified grain size distribution curves. Performed tests show that the grain size and grain size distribution is of great importance for the filtration tendency. According to performed experiments with inert and cement material, it seems to be advantageous for the penetrability to have a grain size distribution that contains neither too many fine or coarse grains. It is reasonable to believe that the grain size distribution should be relatively steep (narrow grain size range) between minimum and maximum grain size. The maximum grain size is of importance in terms of for example d95. Too large maximum grain size will prevent penetration of the mixture through obstructions in the flow path. According to performed tests, the value of d95, should be between 4-10 times smaller than the aperture to be penetrated by the cement based mixture. The small grain sizes are also of importance in order to achieve a low filtration tendency of the grout. This is because of the increased tendency for the small grains to flocculation into larger agglomerates, compared to larger grain sizes. The filtration experiments with cement based grouts show that influences of parameters like surface chemistry (use of superplastisisers) and cement chemistry (hydration of cement grains) will strongly affect the filtration tendency of the mixture. To visualize the phenomenon of filtration tendency it can be investigated on a larger scale than usually takes place. Filtration experiments in the scale of approximately 100:1 have been performed in order to see influences of grain concentration, grain shape and the penetrated slot aperture. It can be seen that used grain sizes (monodisperse and inert mixture) should be approximately at least 2-3 times smaller than the aperture to be penetrated by the mixture. Numerical experiments of filtration tendency have also been performed to investigate the possibilities to numerically simulate the influence of grain concentration and slot aperture. The numerical experiments are based on Eulerian flow modelling. / QC 20101007
9

Cement Penetrability Characteristics in Textile Cement Systems

Peled, Alva 03 June 2009 (has links) (PDF)
Cement penetrability is a key factor in multifilament cement composites. However, the modes of action and the concepts vary because of brittle and ductile fibers. In the case of brittle fibers such as glass, high penetrability of cement products in between the bundle filaments can lead to brittle composite behavior, and therefore addition in ductility is required. In order to have efficient bundle action and high bonding, fillers can be introduced in between the glass filaments, keeping the telescopic mode of failure but at the same time improving the bond and stress transfer within the filaments of the bundle, even at late ages, resulting in a ductile and high strength composite. On the other hand, ductile fibers such as polypropylene (PP), which also developing low bonding with the cement matrix, result in ductile cement composite but with relatively low strength. Therefore, in this case good penetrability of the cement in between the filaments of the bundle is essential in order to maximize the reinforcing efficiency of the bundle by improving bond. The penetrability of the matrix into a fabric structure and especially in between the bundle filaments made up the fabric is a result of fiber- matrix compatibility, which depends on: level of opening and spaces between the filaments, bundle surface properties including wetting and chemical affinity to the cement matrix, matrix viscosity, processing of the composite, and the nature of the fabric junctions and the resulting tightening effects of the bundle, i.e., influenced by the fabric structure itself.
10

Experimental Evaluation of the Effects of Dynamic Pressure on Improving Cement-based Grout Penetrability : A study performed with the short slot

Mentesidis, Anastasios January 2015 (has links)
The increasing need for watertight underground works, such as tunnel excavations, has sparked an interest in a number of research studies with grout penetrability being the focus. The research has so far contributed to a deeper understanding regarding the assessment of a successful grouting operation from different perspectives such as choice of equipment, material properties, phase planning and performance.  It is well established that several crucial factors influence the penetrability of grouts with pressure type and magnitude being two of them. Researchers have examined this issue from different perspectives and with different instruments. Previous research has shown that the increase of pressure has yielded better grout penetration both in the laboratory and the field. According to studies that dealt with dynamic pressure application, superimposed oscillatory pressure of high frequency resulted in grouts with decreased viscosity and better penetration. However, there is still need for further investigation in terms of lower frequencies, different pressure profiles and magnitudes and possible alternatives regarding the filtration and erosion mechanism. The present study aims to examine the penetrability of grouts under dynamic conditions of predefined peak and rest pressure intervals with frequencies lower than 0.5 Hz. The mechanism of action assumes active decomposition of any partially built plug in the vicinity of a narrowing in a rock fracture caused by the change in flow type before the constriction. The chosen method included the development of a laboratory grout injection system with a pneumatic valve and a pressure control rig. Tests were performed with both constant and varying pressure utilizing different periods of peak and rest intervals. The results showed an overall improvement of penetrability under dynamic conditions compared to the static. The decrease in peak – rest durations from [2 – 2] to [4 – 8] s yielded almost 11 times more material penetrating the 30μm aperture size.  The developed method utilized a pneumatic injection system which culminated in better penetration when tuned at [2 – 2] s of [peak – rest] durations with specific material properties. This study presents an indication that further research towards the direction of dynamic pressure application could be proven beneficial in the grouting industry.

Page generated in 0.0383 seconds