This thesis studies parameters influencing both the performance and stability of solid state sensitized solar cells (ssSSCs). ssSSCs benefit from their low materials and manufacturing processing costs, a consequence of using solution processed materials. However, solution processed materials are often structurally and electronically disordered. By characterizing fully operational ssSSCs and their charge transport properties, this thesis elucidates the factors limiting charge transport and proposes routes towards both improved photovoltaic conversion efficiency and long-term stability. Chapter 2 provides an explanation of the operation of ssSSCs, while Chapter 3 discusses the basic methods used in this thesis. Having set this background, Chapter 4 explores the interaction between atmospheric oxygen and charge doping mechanisms in the organic semiconductors used in ssSSCs. To understand the implications of the findings presented in Chapter 4, a new technique, “transient mobility spectroscopy”, was developed to understand the evolution of balanced charge transport behaviour of disordered semiconductors at different operating conditions in ssSSCs. This technique is presented in full in Chapter 5. The understanding gained in Chapters 4 and 5 suggest that alternative light absorbers with higher extinction coefficients may be beneficial to improving the performance of ssSSCs. Chapter 6 discusses the use of an organometal trihalide perovskite, as light absorber in ssSSCs. Using time resolved techniques, the charge transport and recombination mechanisms in various device architectures are explored, allowing suggestions to be made towards future improvements. Chapter 7 uses the technique presented in Chapter 5 to understand a rapid degradation mechanism of working ssSSCs. Particular focus is placed on the titanium dioxide charge-transporting layer. Building on this newfound understanding, two methods for attaining stable photovoltaic performance are provided, a great step forward for this technology.

Metal-halide perovskites show great promise as solution-processable semiconductors for efficient solar cells and LEDs. In particular, the diffusion range of photogenerated carriers is unexpectedly long and the luminescence yield is remarkably high. While much effort has been made to improve device performance, the barriers to improving charge transport and recombination properties remain unidentified. I first explore charge transport by investigating a back-contact architecture for measurement. In collaboration with the Snaith group at Oxford, we develop a new architecture to isolate charge carriers. We prepare thin films of perovskite semiconductors over laterally-separated electron- and hole-selective materials of SnOₓ and NiOₓ, respectively. Upon illumination, electrons (holes) generated over SnOₓ (NiOₓ) rapidly transfer to the buried collection electrode, leaving holes (electrons) to diffuse laterally as majority carriers in the perovskite layer. We characterise charge transport parameters of electrons and holes, separately, and demonstrate that grain boundaries do not prevent charge transport. Our results show that the low mobilities found in applied-field techniques do not reflect charge diffusivity in perovskite solar cells at operating conditions. We then use the back-contact architecture to investigate recombination under large excess of one charge carrier type. Recombination velocities under these conditions are found to be below 2 cm s⁻¹, approaching values of high quality silicon and an order of magnitude lower than under common bipolar conditions. Similarly, diffusion lengths of electrons and holes exceed 12 μm, an order of magnitude higher than reported in perovskite devices to date. We report back-contact solar cells with short-circuit currents as high as 18.4 mA cm⁻², giving 70% external charge-collection efficiency. We then explore the behaviour of charge carriers in continuously illuminated metal-halide perovskite devices. We show that continuous illumination of perovskite devices gives rise to a segregated charge carrier population, and we find that the distance photo-induced charges travel increases significantly under these conditions. Finally, we examine intermittancy in the photoluminescence intensity of metal-halide perovskite films.

La thèse a pour but d’élaborer et d’étudier les potentialités des semi-conducteurs organiques, transporteurs de trous (HTMs) pour l’application photovoltaïque à l’aide de cellules solaires à base de pérovskite (PSCs). Plusieurs familles de molécules HTM ont été préparées et déposées en solution pour l’élaboration des cellules solaires. L'objectif principal étant d'étudier et d’apporter des informations sur la relation entre la structure moléculaire des nouveaux matériaux de transport de trous et les performances photovoltaïques obtenues, cette étude contribue à une meilleure compréhension fondamentale des propriétés requises des matériaux de transport de trous pour de meilleures performances photovoltaïques.La première étude concerne l’élaboration d’une molécule de type p à base de thieno [3,2-b] thiophène comme élément central avec des dérivés de dimethoxytriphenylamine comme donneurs d’électrons aux extrémités. Différentes conformations sont proposées et révèlent des performances photovoltaïques significativement différentes dans les dispositifs PSC. Notons par exemple, qu’une conformation de structure planaire favorisent la conjugaison avec des valeurs élevées de mobilités et conductivités obtenues.Dans la seconde étude, des molécules donneur-accepteurs à base de dérivés d’acridone 9 (10H) comme accepteur ont été élaborés. En y associant différents fragments donneurs d'électrons, on obtient des structures présentant des caractéristiques favorables à la fois pour de bons transferts de charge intramoléculaire (ICT) et des niveaux d’énergie HOMO-LUMO adaptés et favorisant l’injection des trous de la pérovskite vers l’électrode métallique via le HTM. Des études similaires ont été effectuées avec la thioxanthone.A partir d’un précurseur bon marché et d’une préparation aisée, la troisième étude a permis de synthétiser un dérivé de 9,9’-biacridone, molécule push-pull de type p révélant une structure tridimensionnelle, similaire à celle du Spiro-OMeTAD, molécule référence pour les PSCs.Enfin, la dernière étude concerne l’élaboration de molécules donneur-accepteur à base de thiéno [3,4-c] pyrrole-4,6-dione (TPD). La motivation de cette partie est le développement de la molécule à structure planaire améliorant l’empilement π-π dans la fabrication de dispositifs sans joints de grains. Ces molécules possèdent également un fort caractère ICT, une conjugaison π étendue sur toute la structure et une bonne solubilité ce qui en fait un candidat HTM idéal pour la réalisation d’un dispositif PSCs sans dopant. / The aim of the thesis is to develop and study the potential of organic hole transporting materials (HTMs) for photovoltaic applications using perovskite-based solar cells (PSCs). Several families of HTM molecules have been prepared and deposited in solution for the fabrication of solar cells. Since the main objective is to study and provide information on the relationship between the molecular structure of new hole transport materials and the photovoltaic performances obtained, this study contributes to a better fundamental understanding of the required properties of hole transport materials for better photovoltaic performance.The first study concerns the development of p-type molecules based on Thieno [3,2-b] thiophene as a central unit and π-linker with dimethoxytriphenylamine as end-capping electron donors. Different configurations are designed and revealed significantly different photovoltaic performances in the PSC devices. Remarkable, a planar structure with linear conjugation shows higher values of mobility and conductivity than others, thus it improved device performances.In the second study, donor-acceptor molecules based on 9(10H)Acridone derivatives as an acceptor were developed. By incorporating different electron-donating fragments, we obtain structures with favorable characteristics for both good intramolecular charge transfer (ICT) character and adequate HOMO-LUMO energy levels. Their energy levels are suitable for collecting and injecting the holes from perovskite to the metal electrode through the HTM. Similar studies have been done with Thioxanthone.Using a cheap precursor and facile preparation, the third study synthesized a 9.9'-biacridone derivative. These p-type molecules possess a three-dimensional structure which is similar to that of Spiro-OMeTAD, state-of-the-art molecule for PSCs.Finally, the last study focus on the development of donor-acceptor molecules based on thieno [3,4-c] pyrrole-4,6-dione (TPD). The objective is elaboration of the planar structure molecule which could be improved the π-π stacking effect in the device fabrication without grain boundaries. These molecules also own a strong ICT character, an extended π-conjugation on the whole structure and a good solubility which makes it an ideal candidate for the dopant-free HTM in PSCs.

This thesis is about new ways to experimentally realise materials with desired nano-structures for solution-processable optoelectronic devices such as solar cells and light-emitting diodes (LEDs), and examine structure-performance relationships in these devices. Short exciton diffusion length limits the efficiency of most exciton-based solar cells. By introducing nano-structured architectures to solar cells, excitons can be separated more effectively, leading to an enhancement of the cell’s power conversion efficiency. We use diblock copolymer lithography combined with solvent-vapour-assisted imprinting to fabricate nano-structures with 20-80 nm feature sizes. We demonstrate nanostructured solar cell incorporating the high-performance polymer PBDTTT-CT. Furthermore, we demonstrated the patterning of singlet fission materials, including a TIPS-pentacene solar cell based on ZnO nanopillars. Recently perovskites have emerged as a promising semiconductor for optoelectronic applications. We demonstrate a perovskite light-emitting diode that employs perovskite nanoparticles embedded in a dielectric polymer matrix as the emissive layer. The emissive layer is spin-coated from perovskite precursor/polymer blend solution. The resultant polymer-perovskite composites effectively block shunt pathways within the LED, thus leading to an external quantum efficiency of 1.2%, one order of magnitude higher than previous reports. We demonstrate formations of stably emissive perovskite nanoparticles in an alumina nanoparticle matrix. These nanoparticles have much higher photoluminescence quantum efficiency (25%) than bulk perovskite and the emission is found to be stable over several months. Finally, we demonstrate a new vapour-phase crosslinking method to construct full-colour perovskite nanocrystal LEDs. With detailed structural and compositional analysis we are able to pinpoint the aluminium-based crosslinker that resides between the nanocrystals, which enables remarkably high EQE of 5.7% in CsPbI3 LEDs.

This thesis presents a study of hybrid solar cells, specifically looking at various methods which can be employed in order to increase the power conversion efficiency of these devices. The experiments and results contained herein also present a very accurate picture of how rapidly the field of hybrid solar cells has progressed within the past three years. Chapters 1 and 2 present the background and motivation for the investigations undertaken, as well as the relevant theory underpinning solar cell operation. Chapter 2 also gives a brief review of the literature pertinent to the main types of devices investigated in this thesis; dye-sensitised solar cells, semiconductor sensitized solar cells and perovskite solar cells. Descriptions of the synthetic procedures, as well as the details of device fabrication and any measurement techniques used are outlined in Chapter 3. The first set of experimental results is presented in Chapter 4. This chapter outlines the synthesis of mesoporous single crystals (MSCs) of anatase TiO₂ as well as an investigation of its electronic properties. Having shown that this material has superior electronic properties to the conventionally used nanoparticle films, they were then integrated into low temperature processed dye-sensitised solar cells and achieved power conversion efficiencies of > 3%, exhibiting electron transport rates which were orders of magnitude higher than those obtained for the high temperature processed control films. Chapter 5 further investigates the use of MSCs in photovoltaic devices, this time utilising a more strongly absorbing inorganic sensitiser, Sb₂S₃. Utilising the readily tunable pore size of MSCs, these Sb₂S₃ devices showed an increase in voltage and fill factor which can be attributed to a decrease in recombination within these devices. This chapter also presents the use of Sb₂S₃ in the meso-superstructured configuration. This device architecture showed consistently higher voltages suggesting that in this architecture, charge transport occurs through the absorber and not the mesoporous scaffold. Chapters 6 and 7 focus on the use of hybrid organic-inorganic perovskites in photovoltaic devices. In Chapter 6 the mixed halide, lead-based perovskite, CH₃NH₃PbI_3-xCl_x is employed in a planar heterojunction device architecture. The effects of Lewis base passivation on this material are investigated by determining the photoluminescence (PL) lifetimes and quantum efficiencies of treated and untreated films. It is found that passivating films of this material using Lewis bases causes an increase in the PLQE at low fluences as well as increasing the PL lifetime. By globally fitting these results to a model the trap densities are extracted and it is found that using these surface treatments decreases the trap density of the perovskite films. Finally, these treatments are used in complete solar cells resulting in increased power conversion efficiencies and an improvement in the stabilised power output of the devices. Chapter 7 describes the materials synthesis and characterisation of the tin-based perovskite CH₃NH₃SnI₃ and presents the first operational, lead-free perovskite solar cell. The work presented in this thesis describes significant advances in the field of hybrid solar cells, specifically with regards to improvements made to the nanostructured electrode, and the development and implementation of more highly absorbing sensitizers. The improvements discussed here will prove to be quite important in the drive towards exploiting solar power as a clean, affordable source of energy.

Perovskite solar cells are part of third generation of solar cells and thanks to their atractive properties they are potencional candidates for replacement of silicon solar cells. Inverted planar structure of perovskite solar cells is possible to prepare by low temperature methods and by solution processing techniques. Main aim of this thesis was to prepare and characterize inverted planar perovskite solr cells with a different modification of structure. Perovskite solar cells was prepared with following structures: reference perovskite solar cells, perovskite solar cells with only a perovskite layer, perovskite solar cell without electron transport and perovskite solar cell without hole transport layer. They were prepared simultaneously by spin coating. Methods used for a characterisation of a parameters of this cells were current-voltage characteristic, impedance spektroskopy, meassure of external quantum efficiency and electrolumiscence. Reference perovskite solar cell reached best results folowed by solar cell without hole transport layer. Lowest results were gained by perovskite solar cell without electron transport layer and perovskite solar cell with only perovskite layer, where increased recombination and acumulation of charge were observed,

In this thesis, we have developed a reproducible, safe, and scalable sequential thermal vapour deposition (STVD) method for the growth of quality 3D halide perovskite (HaP) thin films. High-quality methylammonium lead tri-bromide (MAPbBr3), methylammonium lead tri-iodide (MAPbI3), and methylammonium lead bromide-iodide (MAPb(I1-xBrx)3) thin films have been optimised using the STVD technique. The structural, optical, morphological, and electrical properties were tuned by varying the thicknesses of the organic (MAI, MABr) and inorganic (PbI2, PbBr2) precursor thin films and post-annealing times of the HaP. X-ray diffractograms confirmed the cubic MAPbBr3 structure with the Pm¯3 m space group, tetragonal MAPbI3 crystal structure with I4/mcm space group, and the tetragonal MAPbI3 structure being transformed to cubic MAPbBr3 system as MAPb(I1-xBrx)3 (x=0.89-0.95) forms. UV-Vis spectra revealed broad absorption bands with a redshift in absorption onset from 540 to 550 nm for MAPbBr3 and 750 to 780 nm for MAPbI3 as the thickness of respective organic precursors increased from 300 to 500 nm. The bandgap of MAPb(I1-xBrx)3 decreased from 2.21 to 2.14 eV as the thicknesses of MABr precursors increased from 300 to 500 nm. The crystallisation of the HaP started within the chamber, and prolonged post-annealing times exceeding 10 min caused the transformation of MAPbI3 to PbI2. Scanning Electron Micrographs show pin-hole-free and densely packed grains with an average size that increases as thicknesses increase. The charge carrier mobility increases while trap density decreases as the thickness of organic precursors increased. Besides, the thesis investigated the growth and stability of thin MAPbBr3 films at metal/MAPbBr3 interfaces. We studied the structure, morphology, and stability of the optimised MAPbBr3 perovskite on aluminium (Al), tin (Sn), silver (Ag), gold-zinc (Au-Zn) and gold (Au) electrodes, immediately and 60 days later. FE-SEM images show an average grain size that increased linearly with the work function from 294 nm for Al to 850 nm for Au. The MAPbBr3 grains remain glued to Sn, Ag, Au-Zn but delaminate quickly on Al. X-ray analysis of MAPbBr3 reveals variable crystallographic texturing for various metals and loss in intensity of prominent peaks at different rates over time. We found that the best thicknesses of 100 nm PbI2 and 500 nm MAI, and 100 nm PbBr2 and 500 nm MABr are needed for the preparation of quality MAPbI3 and MAPbBr3 thin films for solar cells, respectively. Quality thin MAPb(I0.11Br0.89)3 film is formed by inter-diffusion and halide exchange processes when optimised MAPbBr3 is grown on optimised MAPbI3 as a bottom layer. Al speeds up the degradation of MAPbBr3 at Al/MAPbBr3 while MAPbBr3 is relatively stable at Au-Zn/MAPbBr3 interfaces. / Thesis (PhD (Physics))--University of Pretoria, 2020. / University of Pretoria, the National Research Foundation/The World Academy of Sciences (NRF-TWAS), and NRF grant no N0115/115463 of the SARChI / Physics / PhD (Physics) / Restricted

No description available.

Les perovskites organiques-inorganiques en halogénures de plomb sont des matériaux très prometteurs pour la prochaine génération de cellules solaires avec des avantages intrinsèques tels que leur faible coût de fabrication (grande disponibilité des matériaux de base et leur mise en œuvre à basse température) et leur bon rendement de conversion photovoltaïque. Cependant, les cellules solaires pérovskites sont encore instables et montrent des effets d'hystérésis courant-tension délétères. Dans cette thèse, des résultats de l’analyse physique de couches minces de pérovskite à base de CH3NH3PbI3-xClx et de cellules solaires ont été présentés. Les caractéristiques de transport électrique et les processus de vieillissement ont été étudiés avec différentes approches.Dans une première étape, la synthèse du matériau pérovskite a été optimisée en contrôlant les conditions de dépôt des films en une seule étape telles que la vitesse de rotation (6000 rpm) de la tournette et la température de recuit des films (80 °C). Dans un second temps, des cellules solaires perovskites à base de CH3NH3PbI3-xClx ont été fabriquées en utilisant la structure planaire inversée et caractérisées optiquement et électriquement.Grace à l’utilisation de la spectroscopie optique à décharge luminescente (GDOES), un déplacement des ions halogénures a été observé expérimentalement et de façon directe sous l’application d’une tension électrique. Une longueur de diffusion ionique de 140 nm et un rapport de 65% d'ions mobiles ont été déduits. Il est montré que l'hystérésis courant-tension dans l'obscurité est fortement affectée par la migration des ions halogénures provoquant un écrantage substantiel du champ électrique appliqué. Nous avons donc trouvé sous obscurité un décalage de la tension à courant nul jusque 0,25 V et un courant de fuite jusque 0,1 mA / cm2 en fonction des conditions de mesure. Grâce aux courbes courant-tension en fonction de la température, nous avons déterminé la température de transition de la conductivité ions/électrons à 260K et analysé les résultats expérimentaux en utilisant l'équation de Nernst- Einstein donnant une énergie d'activation de 0.253 eV pour les ions mobiles.Enfin, le processus de vieillissement de la cellule solaire a été étudié avec des mesures optiques et électriques. Nous avons déduit que le processus de vieillissement apparaît d'abord à la surface des cristaux de pérovskite ainsi qu’aux joints de grains. Les mesures GDOES nous indiquent que les caractéristiques électriques des cellules pérovskites sont perdues par une corrosion progressive de l'électrode supérieure en argent causée par la diffusion des ions iodures. / Organic-inorganic lead halide perovskites are very promising materials for the next generation of solar cells with intrinsic advantages such as a low-cost material due to the availability of source materials and low-temperature solution processing as well as a high power conversion efficiency of the sunlight. However, perovskite solar cells are still unstable and show deleterious current-voltage hysteresis effects. Inthis thesis, analyses of CH3NH3PbI3-xClx based perovskite thin films and solar cells are presented. The electrical transport characteristics and the ageing processes are investigated using different approaches.The synthesis of the halide perovskite materials is optimized in a first step by controlling the deposition conditions such as annealing temperature (80°C) and spinning rate (6000 rpm) in the one step-spin-casted process. CH3NH3PbI3-xClx based perovskite solar cells are then fabricated in the inverted planar structure and characterized optically and electrically in a second step.Direct experimental evidence of the motion of the halide ions under an applied voltage has been observed using glow discharge optical emission spectroscopy (GDOES). Ionic diffusion length of 140 nm and ratio of mobile iodide ions of 65 % have been deduced. It is shown that the current-voltage hysteresis in the dark is strongly affected by the halide migration which causes a substantial screening of the applied electric field. Thus we have found a shift of voltage at zero current (< 0.25 V) and a leakage current (< 0.1 mA/cm2) in the dark versus measurement condition. Through the current-voltage curves as a function of temperature we have identified the freezing temperature of the mobile iodides at 260K. Using the Nernst-Einstein equation we have deduced a value of 0.253 eV for the activation energy of the mobile ions.Finally, the ageing process of the solar cell has been investigated with optical and electrical measurements. We deduced that the ageing process appear at first at the perovskite grain surface and boundaries. The electrical characteristics are degraded through a deterioration of the silver top-electrode due to the diffusion of iodides toward the silver as shown by GDOES analysis.

京都大学 / 0048 / 新制・課程博士 / 博士(工学) / 甲第21786号 / 工博第4603号 / 新制||工||1717(附属図書館) / 京都大学大学院工学研究科物質エネルギー化学専攻 / (主査)教授 村田 靖次郎, 教授 辻 康之, 教授 小澤 文幸 / 学位規則第4条第1項該当 / Doctor of Philosophy (Engineering) / Kyoto University / DGAM